Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water Impact Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Modeling Assessment of Residential Air-to-Water Heat Pumps Coupled with Cooling Thermal Storage

This study explored the performance and operating cost viability of air-to-water heat pumps (AWHPs) coupled with thermal energy storage (TES) in efficient new residential construction. AWHPs are an emerging technology in this country, but offer promise in terms of high efficiency, fully contained and factory charged outdoor refrigeration system, and hydronic delivery capabilities, which facilitates zoning, ducts in conditioned space, and TES integration for summer load-shifting. Although this AWHP+TES strategy is not yet mainstream, the authors feel that in ten years as decarbonization efforts proceed and TOU rates become more common, strategies such as this will be more accessible. Validated EnergyPlus simulation models were developed based on detailed monitoring data collected over several years at Pacific Gas and Electric's CVRH laboratory test homes located in Stockton, California. One of the CVRH test homes (1,962 ft 2 two-story) had been testing various AWHP systems and configurations over the past six years. The validated model was then updated with high efficiency IECC ZERH envelope and component requirements for climate zones 1-5, including ducts in conditioned space thermal distribution. Simulations were completed for the 1,962 ft 2 home in each climate zone for a minimum efficiency ASHP, an AWHP coupled with a fan coil, and an AWHP coupled with TES sized to eliminate summer on-peak compressor operation. To maintain consistency in reporting energy use estimates, all cases were run with a similar indoor thermostat control strategy to pre-cool the house below the nominal 76 degrees Fahrenheit set point prior to the on-peak period and float slightly above the set point during the peak period. The AWHP+TES configuration was controlled to alternately condition the indoor space or to charge the TES tanks prior to the beginning of the on-peak. Three composite TOU rates were developed based on existing TOU rates across the U.S. to provide differing economic scenarios to evaluate customer bill impacts throughout the summer. Two of the TOU rates had short three-hour peak periods, while the third rate had a longer seven-hour duration peak period. AWHP modeling projections were based on the observed field performance of the Chiltrix CX34 variable speed unit. Other products on the market or entering the market in the near term would likely perform differently.

25 ENERGY STORAGE↗

Size_resolved_ice_nucleating_particle_INP_concentrations_from_the_INPOP_campaign

Ground-based immersion mode ice nucleation measurements were conducted on samples collected at the US DOE ARM AMF3 in Oliktok Point, AK from 1 Mar to 31 May 2017. Samples were collected using a Davis Rotating-drum Unit for Monitoring (DRUM; DRUMAir, LLC) cascading impactor in 4 stages (i.e., size bins). Instrument information on the model used, the DA400, can be found at the DRUMAir website (http://www.drumair.com/). Stages A, B, C, and D, had particle size cuts at 2.96, 1.21, 0.34, and 0.15 µm in particle diameter. Strips of sample substrate (PFA, perfluoroalkoxy; McMaster) were adhered to each disc in each stage and coated with petrolatum to enable particles to stick on impact. The discs move slowly over time, such that aerosol loading is streaked onto the PFA. Every 24 hours, a blank is created on the PFA to separate daily samples. The pump typically pulled 25 lpm at the inlet with all the discs in place in each stage. Daily samples were collected for each of the four stages, equaling 36,000 total L of air per sample. Discs rotated for approximately 24 days before the sampling per strip was complete and changed to a new disc. Discs were stored frozen after collection. Following collection and transport from AMF3 to PI Creamean's laboratory in Boulder, CO, strips were removed from the discs and cut up to separate daily samples. Each daily portion of the strip was stored in separate sterile bags and stored in a standard commercial freezer until analysis (approximately 4 – 5 months after collection). Drop freezing assays (DFAs) were conducted on one daily sample per week of the study for all four stages, with daily samples analyzed from 22 - 29 May 2017. Immediately after removal from the freezer, 2 mL of ultrapure water was added with a single-use sterile syringe directly to the bags, then mixed using a vortex mixer for 2 hours at 500 rpm to resuspend particles from the PFA into the ultrapure water. Following sample preparation, another single-use syringe was used to create 100 aliquots on a 3-inch diameter copper plate, then covered with a transparent plastic dome. The drops were approximately the same volume (2.5 µL each), though careful inspection. The plate was cooled at approximately 3 – 10 K min-1 from room temperature until all drops froze on the plate. Temperature was measured by an Omega thermocouple probes and meter. Drop freezing was visually detected, but recorded through monitoring software to provide the time frozen, channel of the meter used, temperature, and cooling rate for each drop. Not all 100 drops were always detected; the total number of rows in each data file equals the number of drops recorded, which typically was > 80 %. Each sample was tested three times (i.e., a new set of 100 drops was created for each test). Data provided are files containing these parameters. From the freezing temperatures recorded, the fraction frozen can be calculated as can the estimated INP concentration per L of air using the equation from Vali (1971): [INPs] = −(ln(f)/Valiquot)*(Vsuspension/Vair) where f is the proportion of droplets not frozen, Valiquot is the volume of each aliquot (i.e., 2.5e-6 L), Vsuspension is the volume of the suspension (i.e., 0.002 L), and Vair is the volume of air per sample (i.e., 36000 L). Vali, G.: Quantitative Evaluation of Experimental Results an the Heterogeneous Freezing Nucleation of Supercooled Liquids, Journal of the Atmospheric Sciences, 28, 402-409, 1971.

4-stage DRUM aerosol collector (DA400),Aerosol imp↗

Analysis of aerosol cloud interactions with a consistent signal of meteorology and other influencing parameters

Quantifying the impact of aerosols on cloud micro/macro physical properties and estimating the signature of Aerosol Cloud Interactions (ACI) is one of the challenging tasks in atmospheric sciences. The Moderate Resolution Imaging Spectroradiometer and the European Centre for Medium-Range Weather Forecasts ERA-5 reanalysis data are employed to systematically study the ACI over the monsoon region in Pakistan. Based on the monsoon occurrence and rainfall intensity, the whole region is divided into three sub-regions labeled as highly intensive (R1), moderately intensive (R2) and weak (R3) monsoon region. The results indicate that the monthly mean Aerosol Optical Depth (AOD) peaks in the summer monsoon months (Jun, Jul, Aug, Sep). Here, the well-known Twomey effect whereby the Cloud Droplet Radius (CDR) decreases with increasing AOD holds only over R3; the opposite effects (Anti-Twomey effect) are found over R1 and R2, all passing the test of statistical significance (p<0.05). The multi-year AOD is found to be positively correlated with Cloud Liquid Water Path (CLWP) and Cloud Optical Depth (COD) over R1 and R2, suggesting that thicker clouds containing more water droplets are formed in polluted atmosphere. Over R3, decreases in CLWP and COD are found with increasing AOD only when AOD is less than~0.325. The analysis of ACI over R1 and R2 during the winter months shows similar but stronger responses of CDR, CLWP and COD to the variation in AOD. The weaker responses during the summer monsoon season may attributed to the occurrence of high level cloud and unstable atmospheric condition. Further investigation of the influences of Relative Humidity and pressure vertical velocity on the CDR-AOD relationships shows that although the magnitude of the CDR-AOD correlations change with meteorological conditions, the sign of correlations remain unchanged with meteorological conditions.

54 ENVIRONMENTAL SCIENCES↗

Higher Energy-Content Jet Blending Components Derived from Ethanol (CRADA 467)

This project aims to develop a new sustainable aviation fuel (SAF) that comprises favorable properties, such as high energy density, excellent thermal stability, and favorable cold fold properties. Through catalyst development, this work will provide a route to control the cycloalkane/n-alkane/iso alkane content of a next-generation fuel with minimal or no aromatic content. Combining n-alkane and iso-alkane streams (high specific energy, MJ/kg) with cycloalkanes (higher energy density, MJ/L), is expected to enable at least a 4% net increase in combined (specific (MJ/kg) and volumetric (MJ/L)) energy content without impacting ‘drop-in’ fuel requirements, such as seal swelling. PNNL and LanzaTech have already demonstrated a sustainable, non-petroleum, route to isoalkanes. However, economically attractive cycloalkane production from waste and biomass is challenged by large hydrogen requirements, preferential selectivity to aromatic compounds and low yields to jet fuel range components. Many gaps in understanding cycloalkane properties and performance in complex jet fuel mixtures remain. The close tie and integration of Purdue’s fuel property analysis, with PNNL’s process development, can lead to an economically attractive process. The fuel analysis and testing by Purdue will enable a robust understanding of the properties and behavior of the cycloalkanes produced to inform process development. Additionally, seal-swelling analysis will quantify the ability of fuel blends with zero or minimal aromatics content to satisfy the seal swell requirement of O rings. Lastly, Purdue’s system-level analysis will lead to the development of a roadmap for deployment in key regions that considers system pressures such as hydrogen, water, energy efficiency, and ease of infrastructure access.

10 SYNTHETIC FUELS↗

Impact of Pore Fluid Chemistry on Fine-Grained Sediment Fabric and Compressibility

Fines, defined here as grains or particles, less than 75µm in diameter, exist nearly ubiquitously in natural sediment, even those classified as coarse. Macroscopic sediment properties, such as compressibility, which relates applied effective stress to the resulting sediment deformation, depend on the fabric of fines. Unlike coarse grains, fines have sizes and masses small enough to be more strongly influenced by electrical interparticle forces than by gravity. These electrical forces acting through pore fluids are influenced by pore-fluid chemistry changes. Macroscopic property dependence on pore-fluid chemistry must be accounted for in sediment studies involving subsurface flow and sediment stability analyses, as well as in engineered flow situations such as groundwater pollutant remediation, hydrocarbon migration or other energy resource extraction applications. This study demonstrates how the liquid-limit-based electrical sensitivity index can be used to predict sediment compressibility changes due to pore-fluid chemistry changes. Laboratory tests of electrical sensitivity, sedimentation and compressibility illustrate mechanisms linking micro- and macro-scale processes for selected pure, endmember fines. In conclusion, a specific application considered here is methane extraction via depressurization of gas hydrate-bearing sediment, which causes a dramatic pore-water salinity drop concurrent with sediment being compressed by the imposed effective stress increase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatial patterns of historical crop yields reveal soil health attributes in US Midwest fields

Abstract Attaining high crop yields and increasing carbon storage in agricultural soils, while avoiding negative environmental impacts on water quality, soil erosion, and biodiversity, requires accurate and precise management of crop inputs and management practices. The long-term analysis of spatial and temporal patterns of crop yields provides insights on how yields vary in a field, with parts of field constantly producing either high yields or low yields and other parts that fluctuate from one year to the next. The concept of yield stability has shown to be informative on how plants translate the effects of environmental conditions (e.g., soil, climate, topography) across the field and over the years in the final yield, and as a valuable layer in developing prescription maps of variable fertilizer rate inputs. Using known relationships between soil health and crop yields, we hypothesize that areas with measured constantly low yield will return low carbon to the soil affecting its heath. On this premises, yield stability zones (YSZ) provide an effective and practical integrative measure of the small-scale variability of soil health on a field relative basis. We tested this hypothesis by measuring various metrics of soil health from commercial farmers’ fields in the north central Midwest of the USA in samples replicated across YSZ, using a soil test suite commonly used by producers and stakeholders active in agricultural carbon credits markets. We found that the use of YSZ allowed us to successfully partition field-relative soil organic carbon (SOC) and soil health metrics into statistically distinct regions. Low and stable (LS) yield zones were statistically lower in normalized SOC when compared to high and stable (HS) and unstable (US) yield zones. The drivers of the yield differences within a field are a series of factors ranging from climate, topography and soil. LS zones occur in areas of compacted soil layers or shallow soils (edge of the field) on steeper slopes. The US zones occurring with high water flow accumulation, were more dependent on topography and rainfall. The differences in the components of the overall soil health score (SHS) between these YSZ increased with sample depth suggesting a deeper topsoil in the US and HS zones, driven by the accumulation of water, nutrients, and carbon downslope. Comparison of the field management provided initial evidence that zero tillage reduces the magnitude of the variance in SOC and soil health metrics between the YSZ.

Fowler, Ames↗

Final Scientific/Technical Report. A closed path methane and water vapor gas analyzer

Robust, economical, low-power and reliable closed-path methane (CH 4 ), carbon dioxide (CO 2 ), and water vapor (H 2 O) analyzers suitable for long-term measurements are not readily available commercially. Such analyzers are essential for quantifying the amount of CH 4 and CO 2 released from various ecosystems (wetlands, rice paddies, forests, etc.) and other surface contexts (e.g. landfills, animal husbandry lots, etc.), and for understanding the dynamics of the atmospheric CH4 and CO 2 budget and their impact on climate change and global warming. The purpose of this project is to develop a closed-path methane, carbon dioxide gas and water vapor analyzer capable of long-term measurements in remote areas for global climate change and environmental research. The analyzer will be capable of being deployed over a wide range of ecosystems to understand methane and carbon dioxide exchange between the atmosphere and the surface. Measurements of methane and carbon dioxide exchange need to be made all year-round with limited maintenance requirements. During this Phase II effort, we successfully completed the design of the electronics, optical bench, trace gas detection method and mechanical infrastructure. We are using the technologies of two vertical cavity surface emitting lasers, a multiple-pass Herriott optical cell, wavelength modulation spectroscopy and direct absorption to measure methane, carbon dioxide, and water vapor. We also have designed the instrument application software, Field Programmable Gate Array (FPGA), along with partial completion of the embedded software. The optical bench has been tested in a lab setting with very good results. Major sources of optical noise have been identified and through design, the optical noise floor is approaching -60dB. Both laser modules can be temperature controlled to help maximize the stability of the analyzer. Additionally, a piezo electric transducer has been utilized to randomize the noise introduced from potential etalons. It is expected that all original specifications contained within the initial proposal will be met. We are currently in the beginning stages of assembling the first generation prototypes and finalizing the remaining design elements. The first prototypes will initially be tested in our environmental calibration chamber in which specific gas concentrations, temperature and humidity levels can be controlled. Once operation in this controlled setting is verified, the prototypes will be deployed at LI-COR's Experimental Research Station (LERS). Deployment at the LERS site will test the instrument's robustness in a real-world situation.

47 OTHER INSTRUMENTATION↗

Internally damped, self-arresting vertical drop-weight apparatus

A vertical dropped-weight impact test machine has a dropped-weight barrel vertically supported on upper and lower support brackets. The dropped-weight barrel is chambered to receive a dropped-weight assembly having a latch pin at its upper end, a damping unit in the middle, and a tup at its lower end. The tup is adapted for gathering data during impact testing. The latch pin releasably engages a latch pin coupling assembly. The latch pin coupling assembly is attached to a winch via a halyard for raising and lowering the dropped-weight assembly. The lower end of the dropped-weight barrel is provided with a bounce-back arresting mechanism which is activated by the descending passage of the dropped-weight assembly. After striking the specimen, the dropped-weight assembly rebounds vertically and is caught by the bounce-back arresting mechanism. The damping unit of the dropped-weight assembly serves to dissipate energy from the rebounding dropped-weight assembly and prevents the dropped-weight assembly from rebounding from the self-arresting mechanism.

Ambur, Damodar R.↗

Suboptimal schemes for atmospheric data assimilation based on the Kalman filter

This work is directed toward approximating the evolution of forecast error covariances for data assimilation. The performance of different algorithms based on simplification of the standard Kalman filter (KF) is studied. These are suboptimal schemes (SOSs) when compared to the KF, which is optimal for linear problems with known statistics. The SOSs considered here are several versions of optimal interpolation (OI), a scheme for height error variance advection, and a simplified KF in which the full height error covariance is advected. To employ a methodology for exact comparison among these schemes, a linear environment is maintained, in which a beta-plane shallow-water model linearized about a constant zonal flow is chosen for the test-bed dynamics. The results show that constructing dynamically balanced forecast error covariances rather than using conventional geostrophically balanced ones is essential for successful performance of any SOS. A posteriori initialization of SOSs to compensate for model - data imbalance sometimes results in poor performance. Instead, properly constructed dynamically balanced forecast error covariances eliminate the need for initialization. When the SOSs studied here make use of dynamically balanced forecast error covariances, the difference among their performances progresses naturally from conventional OI to the KF. In fact, the results suggest that even modest enhancements of OI, such as including an approximate dynamical equation for height error variances while leaving height error correlation structure homogeneous, go a long way toward achieving the performance of the KF, provided that dynamically balanced cross-covariances are constructed and that model errors are accounted for properly. The results indicate that such enhancements are necessary if unconventional data are to have a positive impact.

Todling, Ricardo↗

Thermal Cyclic Behavior of Thermal and Environmental Barrier Coatings Investigated Under High-Heat-Flux Conditions

Environmental barrier coatings (EBC's) have been developed to protect silicon-carbide- (SiC) based ceramic components in gas turbine engines from high-temperature environmental attack. With continuously increasing demands for significantly higher engine operating temperature, future EBC systems must be designed for both thermal and environmental protection of the engine components in combustion gases. In particular, the thermal barrier functions of EBC's become a necessity for reducing the engine-component thermal loads and chemical reaction rates, thus maintaining the required mechanical properties and durability of these components. Advances in the development of thermal and environmental barrier coatings (TBC's and EBC's, respectively) will directly impact the successful use of ceramic components in advanced engines. To develop high-performance coating systems, researchers must establish advanced test approaches. In this study, a laser high-heat-flux technique was employed to investigate the thermal cyclic behavior of TBC's and EBC's on SiC-reinforced SiC ceramic matrix composite substrates (SiC/SiC) under high thermal gradient and thermal cycling conditions. Because the laser heat flux test approach can monitor the coating's real-time thermal conductivity variations at high temperature, the coating thermal insulation performance, sintering, and delamination can all be obtained during thermal cycling tests. Plasma-sprayed yttria-stabilized zirconia (ZrO2-8 wt% Y2O3) thermal barrier and barium strontium aluminosilicate-based environmental barrier coatings (BSAS/BSAS+mullite/Si) on SiC/SiC ceramic matrix composites were investigated in this study. These coatings were laser tested in air under thermal gradients (the surface and interface temperatures were approximately 1482 and 1300 C, respectively). Some coating specimens were also subject to alternating furnace cycling (in a 90-percent water vapor environment at 1300 C) and laser thermal gradient cycling tests (in air), to investigate the water vapor effect. All cyclic tests were conducted using a 60-min hot-time temperature.

Zhu, Dongming↗

Internally damped, self-arresting vertical drop-weight impact test apparatus

A vertical dropped-weight impact test machine has a dropped-weight barrel vertically supported on upper and lower support brackets. The dropped-weight barrel is chambered to receive a dropped-weight assembly having a latch pin at its upper end, a damping unit in the middle, and a tup at its lower end. The tup is adapted for gathering data during impact testing. The latch pin releasably engages a latch pin coupling assembly. The latch pin coupling assembly is attached to a winch via a halyard for raising and lowering the dropped-weight assembly. The lower end of the dropped-weight barrel is provided with a bounce-back arresting mechanism which is activated by the descending passage of the dropped-weight assembly. After striking the specimen, the dropped-weight assembly rebounds vertically and is caught by the bounce-back arresting mechanism. The damping unit of the dropped-weight assembly serves to dissipate energy from the rebounding dropped-weight assembly and prevents the dropped-weight assembly from rebounding from the self-arresting mechanism.

Ambur, Damodar R.↗

Internally damped, self-arresting vertical drop-weight impact test apparatus

A vertical dropped-weight impact test machine has a dropped-weight barrel vertically supported on upper and lower support brackets. The dropped-weight barrel is chambered to receive a dropped-weight assembly having a latch pin at its upper end, a damping unit in the middle, and a tup at its lower end. The tup is adapted for gathering data during impact testing. The latch pin releasably engages a latch pin coupling assembly. The latch pin coupling assembly is attached to a winch via a halyard for raising and lowering the dropped-weight assembly. The lower end of the dropped-weight barrel is provided with a bounce-back arresting mechanism which is activated by the descending passage of the dropped-weight assembly. After striking the specimen, the dropped-weight assembly rebounds vertically and is caught by the bounce-back arresting mechanism. The damping unit of the dropped-weight assembly serves to dissipate energy from the rebounding dropped-weight assembly and prevents the dropped-weight assembly from rebounding from the self-arresting mechanism.

Ambur, Damodar R.↗

Technical Consultation of the International Space Station (ISS) Internal Active Thermal Control System (IATCS) Cooling Water Chemistry

The Internal Active Thermal Control System (IATCS) coolant exhibited unexpected chemical changes during the first year of on-orbit operation following the launch and activation in February 2001. The coolant pH dropped from 9.3 to below the minimum specification limit of 9.0, and re-equilibrated between 8.3 and 8.5. This drop in coolant pH was shown to be the result of permeation of CO2 from the cabin into the coolant via Teflon flexible hoses which created carbonic acid in the fluid. This unexpected diffusion was the result of having a cabin CO2 partial pressure higher than the ground partial pressure (average 4.0 mmHg vs. less than 0.2 mmHg). This drop in pH was followed by a concurrent increasing coolant nickel concentration. No other metal ions were observed in the coolant and based on previous tests, the source of nickel ion was thought to be the boron nickel (BNi) braze intermetallics used in the construction of HXs and cold plates. Specifically, BNi2 braze alloy was used for the IATCS IFHX and BNi3 braze alloy was used for the IATCS Airlock Servicing and Performance Checkout Unit (SPCU) HX and cold plates. Given the failure criticality of the HXs, a Corrosion Team was established by the IATCS CWG to determine the impact of the nickel corrosion on hardware performance life.

Gentz, Steven J.↗

TEAMER: DAISY Flow-noise Testing (Abstract)

Evaluating impacts of marine energy devices is generally difficult given the dynamic environment where these devices need to be placed. The University of Washington’s (UW) DAISY (The Drifting Acoustic Instrumentation SYstem) is designed to measure radiated noise around marine energy converters operating in energetic waves and currents. In currents, a primary limitation for measurement fidelity at low frequencies (< 100 Hz) is the potential for non-propagating “flow-noise” to mask propagating sound and inflate estimates of the radiated noise from marine energy converters at frequencies that overlap with hearing sensitivities of fish and some marine mammals. While free-drifting measurements help to minimize the relative velocity that produces flow-noise, significant levels were still observed during initial DAISY tests. This motivated the development of a fabric “flow shield” around the hydrophone that disrupts both flow-noise generation mechanisms proposed by the initial tests. First, the flow shield is a source of substantial drag which keeps the hydrophone package moving with the approximate velocity of the surrounding water, compensating for differential wind or current forcing on the surface expression. By minimizing relative velocity around the hydrophone, turbulence shed by the hydrophone is also minimized. Second, the flow shield creates a largely quiescent pocket around the hydrophone, minimizing advection of free stream turbulence over the hydrophone element. Field data collected in these experiments will test effectiveness of these flow shields and provide quantitative data use and deployment.

16 TIDAL AND WAVE POWER↗

Detecting Coastal Wetland Degradation by Combining Remote Sensing and Hydrologic Modeling

Sea-level rise and climate change stresses pose increasing threats to coastal wetlands that are vital to wildlife habitats, carbon sequestration, water supply, and other ecosystem services with global significance. However, existing studies are limited in individual sites, and large-scale mapping of coastal wetland degradation patterns over a long period is rare. Our study developed a new framework to detect spatial and temporal patterns of coastal wetland degradation by analyzing fine-scale, long-term remotely sensed Normalized Difference Vegetation Index (NDVI) data. Then, this framework was tested to track the degradation of coastal wetlands at the Alligator River National Wildlife Refuge (ARNWR) in North Carolina, United States, during the period from 1995 to 2019. We identified six types of coastal wetland degradation in the study area. Most of the detected degradation was located within 2 km from the shoreline and occurred in the past five years. Further, we used a state-of-the-art coastal hydrologic model, PIHM-Wetland, to investigate key hydrologic processes/variables that control the coastal wetland degradation. The temporal and spatial distributions of simulated coastal flooding and saltwater intrusion confirmed the location and timing of wetland degradation detected by remote sensing. The combined method also quantified the possible critical thresholds of water tables for wetland degradation. The remote sensing–hydrologic model integrated scheme proposed in this study provides a new tool for detecting and understanding coastal wetland degradation mechanisms. Our study approach can also be extended to other coastal wetland regions to understand how climate change and sea-level rise impact wetland transformations.

54 ENVIRONMENTAL SCIENCES↗

Water and Air Measures That Make 'PureSense'

Each day, we read about mounting global concerns regarding the ability to sustain supplies of clean water and to reduce air contamination. With water and air serving as life s most vital elements, it is important to know when these environmental necessities may be contaminated, in order to eliminate exposure immediately. The ability to respond requires an understanding of the conditions impacting safety and quality, from source to tap for water, and from outdoor to indoor environments for air. Unfortunately, the "time-to-know" is not immediate with many current technologies, which is a major problem, given the greater likelihood of risky situations in today s world. Accelerating alert and response times requires new tools, methods, and technologies. New solutions are needed to engage in more rapid detection, analysis, and response. This is the focus of a company called PureSense Environmental, Inc., which evolved out of a unique relationship with NASA. The need for real-time management and operations over the quality of water and air, and the urgency to provide new solutions, were reinforced by the events of September 11, 2001. This, and subsequent events, exposed many of the vulnerabilities facing the multiple agencies tasked with working in tandem to protect communities from harmful disaster. Much has been done since September 11 to accelerate responses to environmental contamination. Partnerships were forged across the public and private sectors to explore, test, and use new tools. Methods and technologies were adopted to move more astutely from proof-of-concept to working solutions.

Source record↗

The Amazon River‐Breeze Circulation Limits Detection of Aerosol‐Cloud Interactions in Warm Clouds

Increased aerosol concentrations can brighten low-level clouds and extend their lifetimes, but aerosol–cloud interactions (ACI) remain highly uncertain and difficult to quantify. We show that part of this uncertainty is caused by topographical influences on clouds, that is, those arising from land–water contrasts. This is demonstrated using satellite retrievals in regions with extensive river networks, such as the Amazon Basin. 15 years of MODerate resolution Imaging Spectroradiometer (MODIS) satellite data show cloud formation over the Amazon River basin is suppressed by 26% with warm low clouds above the river exhibiting a 22% smaller droplet effective radius and 18% higher droplet concentration ($N_d$) compared to adjacent land clouds. Thus, clouds above the river may appear polluted but are actually influenced by river-breeze circulations driven by the thermal contrast between the river and the surrounding land. These responses are robust in both wet and dry seasons, and tests using an improved MODIS retrieval product show cloud differences are unlikely due to retrieval artifacts. In situ measurements from the Green Ocean Amazon Experiment (GoAmazon) confirm that $N_d$ is elevated above rivers and are also higher when carbon monoxide concentrations are elevated near the large city of Manaus. Lagrangian airmass tracking over Manaus shows that regional-scale river-breeze circulations impact $N_d$ as much as the urban aerosol plume, complicating ACI attribution and highlighting the need to isolate land-surface effects to assess ACI in continental regions.

Aerosol-Cloud Interactions↗

High Pressure Response of Siliceous Materials

Several siliceous (i.e., materials containing, resembling, relating to or consisting of silica or silicon dioxide) materials were examined in this study conducted by Oak Ridge National Laboratory and sponsored by the US Army TARDEC. Some were glasses (fused silica or fused quartz, Starphire soda lime silicate glass, hydrated Starphire, BOROFLOAT borosilicate glass, an iron-containing soda lime silicate glass, opal (a hydrated silicate glass), ROBAX glass ceramic, and others were single crystal (α-quartz) and polycrystalline (Coesite - a high pressure phase of crystalline quartz) ceramics. Some of these materials are presently used in transparent armor systems or are under consideration for such. The testing of these materials allowed for comparisons of glass types, glass versus glass ceramics, effect of water content, and comparison of amorphous versus crystalline materials of the same composition. The responses of these materials to high pressure loading were studied using spherical indentation testing, diamond anvil cell testing, and laser shock testing. So besides the focus of this study being on the siliceous materials, as much emphasis was placed on the efficacy of these three test methods to exploit high pressure responses. Each test is different and enables the study of different aspects of high pressure response as highlighted below. 1. Spherical indentation, when using small indenter diameters, produces both high pressure and shear, and the loading and unloading histories enabled quantification of apparent yield stress and semi-quantification of energy absorption capability (hysteresis) of the various siliceous materials. 2. Diamond anvil cell testing produces a hydrostatic stress, and when concurrently used with Raman Spectroscopy, enabled the potential identification of changes of state of material as a function of quantified pressure for the various siliceous materials. Permanent densification was also detectable. 3. Laser shock testing produces high pressures but under dynamic conditions (impact event less than 30 ns), so this enabled the study of the effect of rate on high pressure. A previously unobserved damage mechanism was revealed with this testing, and the ease or difficulty of laser-shock-induced damage initiation was deemed to be relatable to the native surface flaw population that exists on these materials.

Wereszczak, Andrew A.↗