Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A Hierarchical Task Scheduler for Heterogeneous Computing

Heterogeneous computing is one of the future directions of HPC. Task scheduling in heterogeneous computing must balance the challenge of optimizing the application performance and the need for an intuitive interface with the programming run-time to maintain programming portability. The challenge is further compounded by the varying data communication time between tasks. This paper proposes RANGER, a hardware-assisted task-scheduling framework. By integrating RISC-V cores with accelerators, the RANGER scheduling framework divides scheduling into global and local levels. At the local level, RANGER further partitions each task into fine-grained subtasks to reduce the overall makespan. At the global level, RANGER maintains the coarse granularity of the task specification, thereby maintaining programming portability. The extensive experimental results demonstrate that RANGER achieves a 12.7× performance improvement on average, while only requires 2.7% of area overhead.

Miniskar, Narasinga Rao↗
DOE OSTI2020

Predicting ductility of Mg/SiCp nanocomposite under multiaxial loading conditions based on unit cell modeling

This article presents an investigation on the ductility of Mg/SiCp under nine different multiaxial loading conditions based on a unit cell (or called representative volumetric element, RVE) finite element model. The constitutive relationship of magnesium matrix is characterized by a model combined Lode angle dependent plasticity model with the CPB06 plasticity model, which is able to describe the tension-compression asymmetry in magnesium matrix. The debonding of the matrix-particle interface and matrix fracture are considered by the modified Mohr-Coulomb (MMC) fracture model. Simulation results show that the interface debonding and subsequent matrix fracture are responsible for the ductility and fracture of nanocomposite. The computational results with parametric studies are compared and well correlated with experimental data, and it finally gives a stress-based full fracture locus of Mg/SiCp nanocomposite.

42 ENGINEERING↗
DOE OSTI2022

A Hybrid Quantum–Classical Study of Ion Adsorption at the Copper Electrode

Here, we present a set of computational studies that surveys the molecular structure and thermodynamics of simple ions at the electrode–electrolyte interface. A hybrid quantum–classical approach is used to obtain free energy profiles and solvent structure as a function of the ion’s position relative to the electrochemical liquid/solid interface and system potential. Model systems consist of a copper electrode and single halide or alkali metal ion in contact with an implicit solvent and reveal new insights into the interplay of forces that drive or resist ion absorption at the electrode/ electrolyte interface. We also expand on subtleties of absorption site preference and describe the complex relationship between the energetic barrier to absorption and the ion–electrode binding energy as a function of electrode potential.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Capturing Surface Coverage Effects in Heterogeneous Catalysis

Adsorbate–adsorbate lateral interactions at relevant surface coverages have a significant effect on chemical kinetics, thereby influencing the activity of a heterogeneous catalyst. Coverage-dependent kinetic and thermodynamic parameters therefore must be included in studies of such complex systems to properly predict the turnover frequencies and kinetic trends. Thus, it becomes extremely important to accurately capture the strength of lateral interactions between neighboring species under realistic reaction conditions. In this Perspective, we discuss the various existing computational and experimental methods for determining adspecies coverage and configurational effects. The choice of the tools and methods employed in such studies depends on factors such as time, length scales, computational cost, the presence of solvents, and reaction conditions. The applications of each method and the respective challenges are also discussed here. As a result, we discuss the recent developments and future of the state-of-the-art for inclusion of surface coverage and configuration into a holistic picture for accurate predictions of catalytic behavior.

09 BIOMASS FUELS↗
DOE OSTI2015

Metal-Mediated Affinity and Orientation Specificity in a Computationally Designed Protein Homodimer

Computationally designing protein-protein interactions with high affinity and desired orientation is a challenging task. Incorporating metal-binding sites at the target interface may be one approach for increasing affinity and specifying the binding mode, thereby improving robustness of designed interactions for use as tools in basic research as well as in applications from biotechnology to medicine. Here we describe a Rosetta-based approach for the rational design of a protein monomer to form a zinc-mediated, symmetric homodimer. Our metal interface design, named MID1 (NESG target ID OR37), forms a tight dimer in the presence of zinc (MID1-zinc) with a dissociation constant <30 nM. Without zinc the dissociation constant is 4 {micro}M. The crystal structure of MID1-zinc shows good overall agreement with the computational model, but only three out of four designed histidines coordinate zinc. However, a histidine-to-glutamate point mutation resulted in four-coordination of zinc, and the resulting metal binding site and dimer orientation closely matches the computational model (C{alpha} rmsd = 1.4 {angstrom}).

Der, Bryan S.↗
DOE OSTI2023

A novel approach to interface high-Q Fabry–Pérot resonators with photonic circuits

The unique benefits of Fabry–Pérot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and time-keeping systems, it will be necessary to develop strategies to integrate compact Fabry–Pérot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry–Pérot resonators with a silicon photonic circuit. This circuit interface produces a spatial separation of the incident and reflected waves, as required for on-chip Pound–Drever–Hall frequency locking, while also suppressing unwanted back reflections from the Fabry–Pérot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.

Optics↗
DOE OSTI2013

Minimum thermal conductivity in superlattices: A first-principles formalism

The thermal conductivity of silicon-germanium superlattices is computed here from density-functional perturbation theory using relaxation times that include both anharmonic and interface roughness effects. A decrease in the group velocity of low-frequency phonons in addition to the interface-disorder-induced scattering of high-frequency phonons drives the superlattice thermal conductivity to below the alloy limit. At short periods, interplay between decrease in group velocity and increase in phonon lifetimes with increase in superlattice period leads to a minimum in the cross-plane thermal conductivity. Increasing the mass mismatch between the constituent materials in the superlattice further lowers the thermal conductivity below the alloy limit, pointing to avenues for higher efficiency thermoelectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Enabling Pulse-level Programming, Compilation, and Execution in XACC

Noisy gate-model quantum processing units (QPUs) are currently available from vendors over the cloud, and digital quantum programming approaches exist to run low-depth circuits on physical hardware. These digital representations are ultimately lowered to pulse-level instructions by vendor quantum control systems to affect unitary evolution representative of the submitted digital circuit. Vendors are beginning to open this pulse-level control system to the public via specified interfaces. Robust programming methodologies, software frameworks, and backend simulation technologies for this analog model of quantum computation will prove critical to advancing pulse-level control research and development. Prototypical use cases for this include error mitigation, optimal pulse control, and physics-inspired pulse construction. Here we present an extension to the XACC quantum-classical software framework that enables pulse-level programming for superconducting, gate-model quantum computers, and a novel, general, and extensible pulse-level simulation backend for XACC that scales on classical compute clusters via MPI. Our work enables custom backend Hamiltonian definitions and gate-level compilation to available pulses with a focus on performance and scalability. We end with a demonstration of this capability, and show how to use XACC for pertinent pulse-level programming tasks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

AMM: Adaptive Multilinear Meshes

Adaptive representations are increasingly indispensable for reducing the in-memory and on-disk footprints of large-scale data. Usual solutions are designed broadly along two themes: reducing data precision, e.g., through compression, or adapting data resolution, e.g., using spatial hierarchies. Additionally, recent research suggests that combining the two approaches, i.e., adapting both resolution and precision simultaneously, can offer significant gains over using them individually. However, there currently exist no practical solutions to creating and evaluating such representations at scale. In this work, we present a new resolution-precision-adaptive representation to support hybrid data reduction schemes and offer an interface to existing tools and algorithms. Through novelties in spatial hierarchy, our representation, Adaptive Multilinear Meshes (AMM), provides considerable reduction in the mesh size. AMM creates a piecewise multilinear representation of uniformly sampled scalar data and can selectively relax or enforce constraints on conformity, continuity, and coverage, delivering a flexible adaptive representation. AMM also supports representing the function using mixed-precision values to further the achievable gains in data reduction. We describe a practical approach to creating AMM incrementally using arbitrary orderings of data and demonstrate AMM on six types of resolution and precision datastreams. By interfacing with state-of-the-art rendering tools through VTK, we demonstrate the practical and computational advantages of our representation for visualization techniques. With an open-source release of our tool to create AMM, we make such evaluation of data reduction accessible to the community, which we hope will foster new opportunities and future data reduction schemes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

Robotic real-time translational and rotational head motion correction during frameless stereotactic radiosurgery

Purpose: To develop a control system to correct both translational and rotational head motion deviations in real-time during frameless stereotactic radiosurgery (SRS). Methods: A novel feedback control with a feed-forward algorithm was utilized to correct for the coupling of translation and rotation present in serial kinematic robotic systems. Input parameters for the algorithm include the real-time 6DOF target position, the frame pitch pivot point to target distance constant, and the translational and angular Linac beam off (gating) tolerance constants for patient safety. Testing of the algorithm was done using a 4D (XY Z + pitch) robotic stage, an infrared head position sensing unit and a control computer. The measured head position signal was processed and a resulting command was sent to the interface of a four-axis motor controller, through which four stepper motors were driven to perform motion compensation. Results: The control of the translation of a brain target was decoupled with the control of the rotation. For a phantom study, the corrected position was within a translational displacement of 0.35 mm and a pitch displacement of 0.15° 100% of the time. For a volunteer study, the corrected position was within displacements of 0.4 mm and 0.2° over 98.5% of the time, while it was 10.7% without correction. Conclusions: The authors report a control design approach for both translational and rotational head motion correction. The experiments demonstrated that control performance of the 4D robotic stage meets the submillimeter and subdegree accuracy required by SRS.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Impact of Ultrathin Pb Films on the Topological Surface and Quantum-Well States of Bi{sub 2}Se{sub 3} and Sb{sub 2}Te{sub 3} Topological Insulators

The effect of an ultrathin Pb film deposited on the surface of Bi{sub 2}Se{sub 3} and Sb{sub 2}Te{sub 3} compounds on the electronic state structure of topological insulators is studied experimentally by the angle-resolved photoemission spectroscopy (ARPES) technique. The following features are revealed: formation of two-dimensional quantum-well states in the near-surface region, an increase in the binding energy of the Dirac cone and the core levels, and a simultaneous electronic states intensity redistribution in the system in photoemission spectra. The results obtained show that topological states may coexist at the interface between studied materials and a superconductor, which seems to be promising for application in quantum computers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

TopicOnTiles: Tile-Based Spatio-Temporal Event Analytics via Exclusive Topic Modeling on Social Media

Detecting anomalous events of a particular area in a timely manner is an important task. Geo-tagged social media data are useful resource for this task; however, the abundance of everyday language in them makes this task still challenging. To address such challenges, we present TopicOnTiles, a visual analytics system that can reveal information relevant to anomalous events in a multi-level tile-based map interface by using social media data. To this end, we adopt and improve a recently proposed topic modeling method that can extract spatio-temporally exclusive topics corresponding to a particular region and a time point. Furthermore, we utilize a tile-based map interface to efficiently handle large-scale data in parallel. Our user interface effectively highlights anomalous tiles using our novel glyph visualization that encodes the degree of anomaly computed by our exclusive topic modeling processes. To show the effectiveness of our system, we present several usage scenarios using real-world datasets as well as comprehensive user study results.

Choi, Minsuk↗
DOE OSTI2021

PYSEQM

PYSEQM is a package for performing semi-empirical quantum mechanical (SEQM) simulations on molecular systems utilizing PyTorch. SEQM simulations determine molecular properties (energy, electron density, dipole moment, ect.) by solving an approximate Schrödinger equation for the motions of electrons in a molecule. The use of PyTorch provides three specific advantages. First, it allows the calculations to be offloaded to GPU accelerators, giving an order of magnitude increase in speed. Second, back propagation is used to get atomic forces (derivative of the total energy with respect to atomic position) at the same computational cost as the energy calculation itself. Finally, the use of PyTorch makes for a natural interface to modern machine learning methods, which can be used to adjust the semi-empirical parameters build into SEQM methods. Additionally, PYSEQM implements various other optimizations for performing quantum mechanics based molecular dynamics, including SP2 for rapid GPU based solution of the self-consistent field algorithm, and the extended Lagrangian method for rapid QM-MD.

Nebgen, Benjamin↗
DOE OSTI2024

CMLM (Co-Optimized Machine-Learned Manifolds) [SWR-23-41]

Co-optimized Machine-Learned Manifolds (CMLM) is a data-driven approach for developing reduced-order manifold models for high-dimensional chemically reacting systems. It involves a specially designed neural network, the training of which simultaneously optimizes linear combinations of species that define the manifold, nonlinear mapping to outputs of interest such as reaction rates, and (optionally) subfilter closure for large eddy simulation. This software package provides an implementation of the CMLM approach in Python using the PyTorch machine learning library. A few example cases are included, showing how the tool can be applied to different types of data from 0D and 1D reacting simulations performed using Cantera. The neural networks can be saved in a format that is readable by the Pele suite of combustion solvers for use in reacting computational fluid dynamics simulations. This software repository contains several python scripts to perform various tasks associated with the Co-optimized Machine Learned Manifolds (CMLM) model, which is described in Perry, Henry de Frahan, and Yellapantula, CNF, 2022 (https://doi.org/10.1016/j.combustflame.2022.112286). This includes not only the code that defines the CMLM model, but also scripts to generate suitable training data, scripts to pre-process the data, scripts to train the CMLM model, and scripts to plot the output, as well as various other helper files. The scripts depend on several commonly used python libraries for data analysis and chemical reaction computations. The trained models that result from this tool are designed to work with the an interface being implemented in the Pele suite of reacting flow solvers (https://github.com/AMReX-Combustion).

Perry, Bruce↗
DOE OSTI2026

Biosynth Pipeline v1.0

BioPKS Pipeline is a computational pipeline for retrosynthetic design of small molecule biosynthesis pathways (e.g. retrobiosynthesis). It combines capabilities by interfacing with existing retrobiosynthesis tools- RetroTide (developed at LBNL) and DORAnet to create pathways that combine multiple biosynthesis approaches- both megasynthase assembly line enzymes and single step enzymes.

Backman, Tyler [Lawrence Berkeley National Laborat↗
DOE OSTI2016

InteGO2: A web tool for measuring and visualizing gene semantic similarities using Gene Ontology

Here, the Gene Ontology (GO) has been used in high-throughput omics research as a major bioinformatics resource. The hierarchical structure of GO provides users a convenient platform for biological information abstraction and hypothesis testing. Computational methods have been developed to identify functionally similar genes. However, none of the existing measurements take into account all the rich information in GO. Similarly, using these existing methods, web-based applications have been constructed to compute gene functional similarities, and to provide pure text-based outputs. Without a graphical visualization interface, it is difficult for result interpretation. As a result, we present InteGO2 , a web tool that allows researchers to calculate the GO-based gene semantic similarities using seven widely used GO-based similarity measurements. Also, we provide an integrative measurement that synergistically integrates all the individual measurements to improve the overall performance. Using HTML5 and cytoscape.js, we provide a graphical interface in InteGO2 to visualize the resulting gene functional association networks. In conclusion, InteGO2 is an easy-to-use HTML5 based web tool. With it, researchers can measure gene or gene product functional similarity conveniently, and visualize the network of functional interactions in a graphical interface.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

UI Review Results and NARAC Response

This report describes the results of an inter-program design review completed February 16th, 2017, during the second year of a FY16-FY18 NA-84 Technology Integration (TI) project to modernize the core software system used in DOE/NNSA's National Atmospheric Release Advisory Center (NARAC, narac.llnl.gov). This review focused on the graphical user interfaces (GUI) frameworks. Reviewers (described in Appendix 2) were selected from multiple areas of the LLNL Computation directorate, based on their expertise in GUI and Web technologies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Numerical Codes for the DESC-LSST Analysis Pipeline: Core Cosmology Library Standard Modules and Beyond wCDM Modules (Final Technical Report)

The overall objective of the project is to investigate and develop specific software modules and analysis components for the software pipeline of LSST Dark Energy Science Collaboration (DESC). Following the key projects of DESC Science Roadmap (SRM), we will write and test computer codes for the Core Cosmology Library (CCL) in order to complete its modules, functionalities, and interface to work with the analysis pipelines from the five science probes of DESC (parts of SRM deliverables CX4.2TJP, CX6.2CS). We will also code modules for CCL to test models beyond w-Cold-Dark-Matter (wCDM) and modification to gravity (MG). Interfaces for MG models will also be developed for the TJPCOSMO software which is the main pipeline of the Theory and Joint Probe (TJP) working group (deliverable TJP2.3). In order to use the full power of LSST data to constrain MG models, we will also work on constraints from nonlinear regime by running and analyzing MG N-Body simulations using a Parameterized-Post-Friedmann framework into the Gadget-2 simulation package (deliverable TJP2.2). Preliminary results for the simulations were obtained in the past. In collaboration with other DESC groups, we plan to make these simulations feedable to cosmic emulators that are practical for likelihood analyzes (deliverable TJP2.2, parts of CX6.2CS). We will also modify and integrate our current codes for consistency tests between data sets and probes into the pipeline (parts of deliverables CX8.2TJP, TJP2.3). We understand that other groups will contribute to some of these objectives but our team will focus and collaborate with others on the particular part of testing MG and models beyond wCDM and refine the DESC pipeline for this purpose. PI has been coordinating his work with the TJP and CS working groups and the DESC management team. PI is a full member of DESC since June 2013. He and his students have been contributing to LSST-DESC activities and work including TJP telecons, collaboration meetings, hack-weeks, and workshops. PI chaired or co-chaired sessions at collaboration meetings and hack-weeks about testing gravity and models beyond wCDM using LSST. He is coordinating the TJP2 projects for testing models beyond wCDM including the writing of DESC-research-note, development of code for pipeline, and N-Body simulations for MG and beyond wCDM models testable with LSST analyses. As stressed in the DESC white paper, SRM, and P5 report, one of the important questions in understanding cosmic acceleration and dark energy is to be able to distinguish whether the acceleration is due to a dark energy component in the universe or a modification to gravity. Answering these questions will have a significant impact on the question of cosmic acceleration and dark energy. The methods that we will use include analytical work, numerical code, and N-Body simulations. A first approach that that we will use consists of using growth rate parameters that enter the perturbed dynamics equations. These parameters take distinctive values for distinct gravity theories and have potential to distinguish between Dark Energy and Modified Gravity. The second method is to look for inconsistencies in Dark Energy parameter spaces using specific combinations of cosmological data sets. Our investigation addresses the Dark Energy problem that is relevant to the mission of the HEP program to understand how our universe works at its most fundamental level. It will allow us to make progress on the HEP mission to explore the nature of Dark Energy and the basic nature of space and time using future surveys such as LSST. The investigation supports the DOE HEP program Cosmic Frontier as it will contribute to the study and understanding of dark energy and fundamental properties of the universe. The investigation contributes directly to LSST-DESC key projects and their deliverables as described in the Science Road-map document to build analysis pipeline and to test dark energy and beyond wCDM models using LSST.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗