Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Rapid Screening of Single-Atom Catalyst Synthesis Conditions Using ToF-SIMS and Facet-Dependent Single-Crystal Substrates

Single-atom catalysts (SACs) offer superior catalytic performance compared to traditional nanoparticle catalysts but are challenging to develop because of the need for extensive optimization and specialized characterization techniques. Here, this study presents a rapid and versatile method for detecting synthesis conditions and elucidating deposition mechanisms of SACs on various substrates. By depositing active elements (Au, Cu, Ni and Rh) on facet-specific single-crystalline substrates (CeO 2 , TiO 2 , MgO and Al 2 O 3 ) and employing time-of-flight secondary ion mass spectroscopy (ToF-SIMS), we assessed facet-dependent deposition behaviors and identified optimal conditions for solution-based SAC synthesis. On CeO 2 and TiO 2 , we confirmed facet-dependent deposition, primarily influenced by oxygen vacancy density and photocatalytic activity, respectively. MgO exhibited the formation of metal oxide/hydroxide clusters for all active elements, and the degree of clustering for Cu and Ni was correlated with the facet hydrolysis susceptibility. Notably, Au and Rh deposition on MgO was facet-independent, attributed to the formation of hydroxide species in solution. Al 2 O 3 , due to its chemical stability and lack of surface defects, did not show active element deposition. This study not only provides a time and cost-efficient method for prescreening SAC synthesis conditions, but it also provides valuable insights into the various deposition mechanisms governing SAC formation on different substrates, paving the way for the rational design of tailored SACs for various catalytic applications.

ToF-SIMS↗
DOE OSTI2024

Removing Fluoride from Double Four-Membered Rings Yielding Defect-Free Zeolites under Mild Conditions Using Ozone

We have investigated ozone treatment of as-made LTA zeolites under mild temperature conditions (175 °C) using experiments and periodic DFT as a method of energy savings and engineering defects such as silanol nests in comparison with conventional calcination at 550 °C. We have studied ozone treatment on LTA samples synthesized with 1,2-dimethyl-3-(4-methylbenzyl) imidazolium (denoted as “BULKY”) as the primary organic structure-directing agent (OSDA) and with various amounts of tetramethylammonium (TMA) as a secondary OSDA. Ozone treatment of LTA-BULKY at 175 °C was found to give defect-free, pristine LTA materials as determined by 29 Si NMR, 13 C NMR, Raman spectra, and DFT to assign the spectra. This represents a significant and unexpected finding: that fluoride ions can be completely removed from double four-membered rings (D4Rs) under such mild conditions. Furthermore, ozone treatment of LTA-BULKY-TMA samples removed BULKY but left behind TMA/F, giving a new and more diverse structural landscape of Si environments in LTA. Ab initio MetaDynamics calculations provide pathways with relatively low barriers, explaining how fluoride ions can be removed from D4Rs, leaving behind defect-free LTA materials under mild conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Real Time 3D Observations of Portland Cement Carbonation at CO2 Storage Conditions

Depleted oil reservoirs are considered a viable solution to the global challenge of CO 2 storage. A key concern is whether the wells can be suitably sealed with cement to hinder the escape of CO 2 . Under reservoir conditions, CO 2 is in its supercritical state, and the high pressures and temperatures involved make real-time microscopic observations of cement degradation experimentally challenging. Here, we present an in situ 3D dynamic X-ray micro computed tomography (μ-CT) study of well cement carbonation at realistic reservoir stress, pore-pressure, and temperature conditions. The high-resolution time-lapse 3D images allow monitoring the progress of reaction fronts in Portland cement, including density changes, sample deformation, and mineral precipitation and dissolution. By switching between flow and nonflow conditions of CO 2 -saturated water through cement, we were able to delineate regimes dominated by calcium carbonate precipitation and dissolution. For the first time, we demonstrate experimentally the impact of the flow history on CO 2 leakage risk for cement plugging. In-situ μ-CT experiments combined with geochemical modeling provide unique insight into the interactions between CO 2 and cement, potentially helping in assessing the risks of CO 2 storage in geological reservoirs.

58 GEOSCIENCES↗
DOE OSTI2020

Controls on Iron Reduction and Biomineralization over Broad Environmental Conditions as Suggested by the Firmicutes Orenia metallireducens Strain Z6

Microbial iron reduction is a ubiquitous biogeochemical process driven by diverse microorganisms in a variety of environments. However, it is often difficult to separate the biological from the geochemical controls on bioreduction of Fe(III) oxides. In this study, we investigated the primary driving factor(s) that mediate secondary iron mineral formation over a broad range of environmental conditions using a single dissimilatory iron reducer, Orenia metallireducens strain Z6. A total of 17 distinct geochemical conditions were tested with differing pH (6.5–8.5), temperature (22–50 °C), salinity (2–20% NaCl), anions (phosphate and sulfate), electron shuttle (anthraquinone-2,6-disulfonate), and Fe(III) oxide mineralogy (ferrihydrite, lepidocrocite, goethite, hematite, and magnetite). The observed rates and extent of iron reduction differed significantly with k int between 0.186 and 1.702 mmol L –1 day –1 and Fe(II) production ranging from 6.3% to 83.7% of the initial Fe(III). Using X-ray absorption and scattering techniques (EXAFS and XRD), we identified and assessed the relationship between secondary minerals and the specific environmental conditions. It was inferred that the observed bifurcation of the mineralization pathways may be mediated by differing extents of Fe(II) sorption on the remaining Fe(III) minerals. These results expand our understanding of the controls on biomineralization during microbial iron reduction and aid the development of practical applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Cool Roofs in Guangzhou, China: Outdoor Air Temperature Reductions during Heat Waves and Typical Summer Conditions

In this work, we simulate temperature reductions during heat-wave events and during typical summer conditions from the installation of highly reflective "cool" roofs in the Chinese megacity of Guangzhou. We simulate temperature reductions during six of the strongest historical heat-wave events over the past decade, finding average urban midday temperature reductions of 1.2 °C. In comparison, we simulate 25 typical summer weeks between 2004 and 2008, finding average urban midday temperature reductions of 0.8 °C, indicating that air temperature sensitivity to urban albedo in Guangzhou varies with meteorological conditions. We find that roughly three-fourths of the variance in air temperature reductions across all episodes can be accounted for by a linear regression, including only three basic properties related to the meteorological conditions: mean daytime temperature, humidity, and ventilation to the greater Guangzhou urban area. While these results highlight the potential for cool roofs to mitigate peak temperatures during heat waves, the temperature reductions reported here are based on the upper bound case, which increases albedos of all roofs (but does not modify road albedo or wall albedo).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

Carbonate Facilitated Mobilization of Uranium from Lacustrine Sediments under Anoxic Conditions

Sorbed U(IV) species can be major products of U(VI) reduction in natural reducing environments as sediments and waterlogged soils. These species are considered more labile than crystalline U(IV) minerals, which could potentially influence uranium migration in natural systems subjected to redox oscillations. In this work, we examined the role of oxygen and carbonate on the remobilization of uranium from lake sediments, in which ~70% of the 150–300 ppm U is under the form of mononuclear U(IV) sorbed species. Our results show that both drying and oxic incubation only slightly increase the amount of remobilized U after 8 days, compared to anoxic drying and anoxic incubation. In contrast, the amount of remobilized U increases with the quantity of added bicarbonate even under anoxic conditions. Moreover, U L III -edge XANES data show that a significant amount of the solid U(IV) is mobilized in such conditions. Thermodynamic speciation calculations based on the supernatant composition indicates the predominance of aqueous UO 2 (CO 3 ) 3 4– and, to a lesser extent, CaUO 2 (CO 3 ) 3 2– complexes. These results suggest that monomeric U(IV) species could be oxidized into aqueous U(VI) carbonate complexes even under anoxic conditions via carbonate promoted oxidative dissolution, which emphasizes the need for considering such a process when modeling U dynamics in reducing environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Biotransformation of AFFF Component 6:2 Fluorotelomer Thioether Amido Sulfonate Generates 6:2 Fluorotelomer Thioether Carboxylate under Sulfate-Reducing Conditions

The fate of per- and polyfluoroalkyl substances (PFASs) in aqueous film-forming foams (AFFFs) under anaerobic conditions has not been well characterized, leaving major gaps in our understanding of PFAS fate and transformation at contaminated sites. In this study, the biotransformation of 6:2 fluorotelomer thioether amido sulfonate (6:2 FtTAoS), a component of several AFFF formulations, was investigated under sulfate-reducing conditions in microcosms inoculated with either pristine or AFFF-impacted solids. To identify the transformation products, we used high-resolution mass spectrometry and employed suspect-screening and nontargeted compound identification methods. These analyses demonstrated that 6:2 FtTAoS was transformed primarily to a stable polyfluoroalkyl compound, 6:2 fluorotelomer thioether propionate (6:2 FtTP). It did not undergo further reactions to produce the perfluoroalkyl carboxylates and fluorotelomer sulfonates and carboxylates that were observed during aerobic transformations. Here, the 6:2 FtTP was recalcitrant to biotransformation, indicating the stability of the thioether group under sulfate-reducing conditions. The total oxidizable precursor (TOP) assay was used to assess the presence of other PFASs. Although nearly all of the PFAS mass initially present was recovered from the pristine microcosms, only 67% of the initial PFAS mass was recovered from the contaminated microcosms, suggesting the formation of volatile biotransformation products or those that could not be detected by the TOP assay.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Economic Analysis of Condition-Monitoring-Based Predictive Maintenance in Power Plants under Market Elasticity

Condition-monitoring-based predictive maintenance can increase the power plant availability by preventing forced outages. However, the actual on-stream time depends on market elasticity and dynamics, which are affected by cost and penetration of other power generation technologies. This paper develops a systematic approach for the economic analysis of investment in condition monitoring technologies with due consideration of market elasticity. Focus is on corrosion monitoring in coal-fired power plants (CFFPs) since corrosion in high-temperature coal-fired boilers is a leading cause of equipment failure. Investment in sensor networks for measuring corrosion and operating conditions like metal temperature and concentrations of O 2 and SO 2 is investigated. The unscented Kalman filter is used to estimate corrosion in the waterwall section of the boiler under multiple sensor networks. Electricity produced by CFPPs in the future in the U.S. due to changes in availability under market elasticity is studied. Sensitivity of the incremental net present value to factors like the number, type, and cost of sensors is analyzed.

Electrochemistry↗
DOE OSTI2017

Reaction Kinetic Model of Dilute Acid-Catalyzed Hemicellulose Hydrolysis of Corn Stover under High-Solid Conditions

High solid conditions are desirable in pretreatment of lignocellulosic biomass. An advanced dilute-acid pretreatment reactor has been developed at National Renewable Energy Laboratory (NREL). It is a continuous auger-driven reactor that can be operated with high-solid charge at high temperature and with short residence time resulting high productivity and high sugar concentration. Here, we investigated the kinetics of the reactions associated with dilute-acid pretreatment of corn stover, covering the reaction conditions of the NREL reactor operation: 155-185 C, 1-2 wt% sulfuric acid concentration, and 1:2 solid to liquid ratio. The experimental data were fitted to a first-order biphasic model which assumes that xylan is comprised of two different fragments: fast and slow reacting fractions. Due to the high solid loading condition, significant amount of xylose oligomers was observed during the pretreatment. We also included the oligomers as an intermediate entity in the kinetic model. The effect of acid concentration was incorporated into the pre-exponential factor of Arrhenius equation. The kinetic model with bestfit kinetic parameters has shown good agreement with experimental data. The kinetic parameter values of the proposed model were noticeably different from those previously reported. The activation energies of xylan hydrolysis are lower and the acid exponents are higher than the average of literature values. The proposed model can serve as a useful tool for design and operation of pretreatment system pertaining to corn stover.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis of Single Crystal Li 2 NpO 4 and Li 4 NpO 5 from Aqueous Lithium Hydroxide Solutions under Mild Hydrothermal Conditions

The ternary oxides, Li 2 NpO 4 and Li 4 NpO 5 , were synthesized under mild hydrothermal conditions using concentrated LiOH solutions containing NpO 2 (NO 3 )( 2 ). The reactions resulted in the formation of single crystals of both compounds, enabling the determination of their single crystal structures for the first time. Further, exploration of the synthetic phase space demonstrates that the resulting neptunate phases are dependent on the concentration of LiOH, transitioning from Li 2 NpO 4 , containing a typical octahedral neptunyl geometry with two shorter Np≡O bonds, at lower LiOH concentrations to Li 4 NpO 5 with two long and four short Np-O bonds under saturated solution conditions. Reactions exploring the same synthetic conditions are also reported for uranyl(VI) for comparison. Raman spectra of the compounds were collected and analyzed to evaluate the Np-O bonding in these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Ligand Noninnocence in Nickel Porphyrins: Nickel Isobacteriochlorin Formation under Hydrogen Evolution Conditions

Here, an electron-deficient nickel porphyrin complex undergoes facile ring reduction to form a nickel isobacteriochlorin complex under hydrogen evolution conditions. Spectroscopic experiments indicate that the reduced nickel porphyrin undergoes subsequent reduction and protonation to form a phlorin anion rather than a metal hydride, demonstrating that the key initial proton-coupled electron transfer step is directed toward the ligand versus the metal. The phlorin anion facilely converts to the isobacteriochlorin in the presence of two-electron and three-proton equivalents. Cyclic voltammetry (CV) and spectroscopic experiments reveal that the four-electron, four-proton electrochemical reduction of nickel porphyrin to isobacteriochlorin occurs promptly in the presence of the strong proton donor tosic acid, followed by hydrogen evolution reaction (HER) catalysis at slightly more negative potentials. CVs of independently synthesized Ni isobacteriochlorin show a catalytic HER at the same potentials as those observed for the HER in CVs of the Ni porphyrin. We discover that, under strongly acidic conditions, the HER catalysis arises from conversion of the Ni isobacteriochlorin into a nickel-containing, catalytically active electrode-adsorbed species. These results show that Ni porphyrin converts to Ni isobacteriochlorin under HER catalysis conditions via a ligand-based PCET process and that it is the isobacteriochlorin complex which gives rise to an active HER catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Diffusivity of Carbon Dioxide in Aqueous Solutions under Geologic Carbon Sequestration Conditions

Accurate assessment of the long-term security of geologic carbon sequestration requires knowledge of the mobility of carbon dioxide in brines under pressure and temperature conditions that prevail in subsurface aquifers. In this paper, we report Raman spectroscopic measurements of the rate of CO 2 diffusion in water and brines as a function of pressure, salinity, and concentration of CO 2 . In pure water at 50 ± 2 °C and 90 ± 2 bar, we find the diffusion coefficient, D, to be (3.08 ± 0.03) × 10 –9 m 2 /s, a value that is consistent with a recent microfluidic study but lower than earlier PVT measurements. Under reservoir conditions, salinity affects the mobility of CO 2 significantly and D decreased by 45% for a 4 M solution of NaCl. We find significant differences of diffusivity of CO 2 in brines (0–4 M NaCl), in both the absolute values and the trend compared to the Stokes–Einstein prediction under our experimental conditions. Finally, we observe that D decreases significantly at the high CO 2 concentrations expected in subsurface aquifers (~15% reduction at 0.55 mol/kg of CO 2 ) and provides an empirical correction to the commonly reported D values that assume a tracer concentration dependence on diffusivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In Situ Studies of the Formation of MoP Catalysts and Their Structure under Reaction Conditions for Higher Alcohol Synthesis: The Role of Promoters and Mesoporous Supports

Three formulations of a molybdenum phosphide (MoP) catalyst system were characterized for the higher alcohol synthesis (HAS) reaction using in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD), monitoring the chemical phase evolution during activation and under reaction conditions. Here, the in situ study herein provides important insights into the effect of the support and of K that lead to high performance in HAS for K-promoted MoP supported on carbon, as evidenced by previous studies (ethanol selectivity: 29%; conversion: 5%). During the activation process, XAS shows that the carbon-supported samples reduce and reach a highly crystalline state at a lower temperature than the SBA-15-supported sample, indicating a substantial difference in catalyst activation. After activation, the samples are introduced to relevant reaction conditions resulting in spectra fairly similar to one another. XRD results corroborate the difference in the degree of crystallinity of these samples, in alignment with the XAS, and reveal the formation of crystalline potassium pyrophosphate (K 4 P 2 O 7 ) during the activation period of the K-promoted samples. This K 4 P 2 O 7 phase remains present under reaction conditions. Taken together, these results provide insights into the roles played by the carbon support and K promotion, connecting activity to electronic and crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ammonolysis Under NH 3 –Limiting Conditions as a Pathway to Improved LaTiO 2 N Water Splitting Photoanodes

LaTiO 2 N is a promising intermediate band gap semiconductor for the water splitting reaction, a pathway to hydrogen fuel from solar energy. However, the photoelectrochemical (PEC) activity of the material is hindered by defects, particularly Ti(III) species, which promote photocarrier recombination. These defects are formed during the high-temperature ammonolysis reaction. Here we show that improved LaTiO 2 N materials can be synthesized under NH 3 -limiting conditions by introducing N 2 to lower the NH 3 partial pressure to0.13atm.This reduces the Ti(III) defect density in the material from 6.06 × 10 16 to ∼4.61 × 10 15 cm −3 , by a factor of 13, based on electron paramagnetic resonance (EPR) spectroscopy. Any remaining Ti(III) defects are localized at the LaTiO 2 N surface, according to X-ray photoelectron spectroscopy (XPS), due to the formation of a depletion layer in the semico. Optical absorption spectra of the improved LaTiO 2 N reveal a blue-shifted band gap absorption edge and a suppressed sub-band gap absorption. Defect removal also reduces a sub-band gap surface photovoltage feature visible in the 1.0 atm reference material. The improved LaTiO 2 N supports a 1.57 mA cm −2 water oxidation photocurrent at 1.23 V RHE under simulated sunlight conditions, and an enhanced quantum efficiency of 4.5% (400 nm) for photocatalytic oxygen evolution from aqueous silver nitrate solution. Stable PEC operation is observed for over 55 min. This confirms that ammonolysis under NH 3 -limiting conditions improves the solar energy conversion properties of LaTiO 2 N. The ability to control metal ion defects in oxynitrides by varying the ammonia partial pressure during ammonolysis might be generally useful for the preparation of metal nitrides and oxynitrides.

defects↗
DOE OSTI2025

Earth-Abundant Manganese Nitride Catalysts for Mild-Condition Ammonia Synthesis

Developing advanced catalytic materials for mild-condition ammonia (NH 3 ) synthesis is essential for improving the energy efficiency of the industrial Haber-Bosch process. Here, in this study, we report a ζ-phase manganese nitride (MnN 0.43 ) catalyst for low-temperature NH 3 synthesis. The as-synthesized MnN 0.43 catalyst is protected by a carbon shell, allowing for the storage and processing of the air-sensitive metal nitride under ambient conditions. After activation in situ, the MnN 0.43 catalyst exhibits high activity for NH 3 synthesis at 250–350 °C, surpassing the conventional noble metal based Ru/MgO catalyst. A combination of kinetic, chemisorption, isotope labeling and computational studies indicate that a nitrogen vacancy-mediated associative mechanism accounts for the catalytic enhancements. Our work highlights the great potential of earth-abundant transition metal nitrides for catalyzing mild-condition NH 3 synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Ru-Sn/AC for the Aqueous-Phase Reduction of Succinic Acid to 1,4-Butanediol under Continuous Process Conditions

Succinic acid is a biomass-derived platform chemical that can be catalytically converted in the aqueous phase to 1,4-butanediol (BDO), a prevalent building block used in the polymer and chemical industries. Despite significant interest, limited work has been reported regarding sustained catalyst performance and stability under continuous aqueous-phase process conditions. As such, this work examines Ru-Sn on activated carbon (AC) for the aqueous-phase conversion of succinic acid to BDO under batch and flow reactor conditions. Initially, powder Ru-Sn catalysts were screened to determine the most effective bimetallic ratio and provide a comparison to other monometallic (Pd, Pt, Ru) and bimetallic (Pt-Sn, Pd-Re) catalysts. Batch reactor tests determined that a ~1:1 metal weight ratio of Ru to Sn was effective for producing BDO in high yields, with complete conversion resulting in 82% molar yield. Characterization of the fresh Ru-Sn catalyst suggests that the sequential loading method results in Ru sites that are colocated and surface-enriched with Sn. Postbatch reaction characterization confirmed stable Ru-Sn material properties; however, upon a transition to continuous conditions, significant Ru-Sn/AC deactivation occurred due to stainless steel leaching of Ni that resulted in Ru-Sn metal crystallite restructuring to form discrete Ni-Sn sites. Computational modeling confirmed favorable energetics for Ru-Sn segregation and Ni-Sn formation at submonolayer Sn incorporation. To address stainless steel leaching, reactor walls were treated with an inert silica coating by chemical vapor deposition. With leaching reduced, stable Ru-Sn/AC performance was observed that resulted in a molar yield of 71% BDO and 15% tetrahydrofuran for 96 h of time on stream. Postreaction catalyst characterization confirmed low levels of Ni and Cr deposition, although early-stage islanding of Ni-Sn will likely be problematic for industrially relevant time scales (i.e., thousands of hours). Overall, these results (i) demonstrate the performance of Ru-Sn/AC for aqueous phase succinic acid reduction, (ii) provide insight into the Ru-Sn bimetallic structure and deactivation in the presence of leached Ni, and (iii) underscore the importance of compatible reactor metallurgy and durable catalysts.

09 BIOMASS FUELS↗
DOE OSTI2019

Chemical Trapping of CO2 by Clay Minerals at Reservoir Conditions: Two Mechanisms Observed by In Situ High Pressure and Temperature Experiments

The reaction of clay minerals in sedimentary rocks with supercritical CO2-rich fluids is poorly understood, but has potential implications for enhanced oil and gas production and geological C-sequestration. Experiments performed in situ at temperature and pressure relevant to reservoir conditions (T = 323 K and Pfluid = 90 bar) show that trioctahedral clay minerals can react with supercritical CO2 to produce carbonate phases by both ion exchange/precipitation reactions and dissolution/reprecipitation on a timescale of hours under certain conditions. The dissolution/reprecipitation reactions were observed in a synthetic, high surface area/high edge site surface area smectite (laponite) exchanged with Ca2+, Cs+, and tetramethyl ammonium (TMA+), and the ion exchange/precipitation mechanism was observed for a Pb-exchanged natural smectite (hectorite). Novel X-ray diffraction and NMR and infrared spectroscopic tools provide in situ observation of the reactions in real time supported by a suite of ex situ analyses. For the laponites, IR data show that HCO3- ion forms at water contents as small as ~5 H2O molecules/exchangeable cation. When the exchangeable cation is Ca2+, the IR data show the formation of carbonate as well, and the NMR results show formation of amorphous calcium carbonate at low water contents in addition to HCO3-. Laponites equilibrated at 100% R.H. at atmospheric conditions and then exposed to scCO2 generate additional, more mobile HCO3- ion and exhibit evidence of clay dissolution leading to a poorly crystalline or amorphous hydrous magnesium carbonate/bicarbonate that forms from Mg2+ released by dissolution of the octahedral sheet. The 100% R.H. sample with exchangeable Ca2+ also forms calcite, vaterite and aragonite precipitates. Comparison of these results with those already published in the literature suggest that a high edge site surface area is crucial to this process occurring on a short timescale. In the Pb-exchanged hectorite exposed to scCO2, once a critical humidity threshold is reached, cerussite (PbCO3) rapidly forms concurrent with exchange of interlayer Pb2+ with H3O+ formed by reaction of CO2 with water on the clay surface. Given that such a reaction is not observed on a similar timescale with more common Ca2+ or Na+ in hectorite and other smectites, the low solubility of cerussite appears to be the thermodynamic driving force for this process, meaning that such reactions are expected to occur more slowly in most natural samples. However, the results suggest that both types of CO2-capturing processes could occur on short and/or geological timescales during CO2 flooding of oil and gas reservoirs, in C-sequestration reservoirs, and as the result of fracking using CO2-based fluids.

Bowers, Geoffrey M.↗
DOE OSTI2025

Influence of Metal Ion Complexation on the Radiolytic Longevity of Butyramide Extractants under Direct Dissolution Process Conditions

The direct dissolution of voloxidized used nuclear fuel (UNF) into an organic solution–comprised of diluent and specialized extractants–poses a promising alternative to the traditional liquid–liquid solvent extraction approach to reprocessing UNF. However, moving to direct dissolution removes the presence of a concentrated nitric acid aqueous phase, which has been shown to significantly influence the radiolytic longevity of extractants in conventional extraction flowsheets. Given the limited knowledge of radiation effects under direct dissolution conditions, here we present a time-resolved and dose-accumulation study on the impact of direct dissolution conditions on the radiolytic longevity of two candidate butyramide extractants, N,N-di(2-ethylhexyl) butyramide (DEHBA) and N,N-di(2-ethylhexyl)isobutyramide (DEHiBA), in pre-equilibrated n-dodecane solvent in the presence and absence of process-relevant metal ions, specifically, uranium and rhenium. Loss G(DEHBA) and G(DEHiBA) values were found to be comparable to each other, with an average of 0.37 ± 0.02 μmol J –1 , and to previous data from the γ irradiation of DEHBA and DEHiBA under conventional solvent extraction conditions. Rhenium, and by extension technetium, extraction had a modest decrease (~10%) in the overall radiolytic stability of DEHiBA only, despite >2× observed increases in chemical kinetic reactivity of the corresponding complexes with the n-dodecane radical cation. Uranium loading, on the other hand, significantly improved the lifetime of both ligands (>30%) under γ irradiation, with a greater stabilization observed for DEHBA over DEHiBA. The observed radioprotective effect afforded by uranium loading is fortuitous for the longevity of direct dissolution solvent.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗