Search NASA⌕ Search

SEARCH · Search NASA

Results for “content analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Reduced alkali-silica reaction damage in recycled glass mortar samples with supplementary cementitious materials

Recycling waste glass aggregate into concrete can reduce environmental impacts but also may lead to serious alkali silica reaction (ASR) damage. This study aims to characterize ASR damage development in the mortar samples containing reactive glass aggregates and investigate the damage reduction effect of the waste supplementary cementitious materials (SCMs), including recycled glass powders and fly ash. The recycled glass aggregate mortar samples with/without SCMs were prepared in this study. The length change tests were first conducted with the prepared mortar samples based on the ASTM C1260 standard. The results demonstrated the added SCMs can largely decrease early-age ASR expansion rate. The optical microscope and Scanning Electron Microscope (SEM) with Energy Dispersive X-ray Spectroscopy (EDS) were further conducted to characterize the ASR damage in mortar samples and investigate the damage mitigation mechanism with added SCMs. The combined SEM imaging and chemical analysis indicated added SCMs can decrease both the alkali and calcium content of the generated ASR gel. In addition, the ASR damage development inside mortar samples were monitored with dynamic micron X-ray CT (μCT) over a reaction period of 63 hour at the temperature of 80°C. The scanning patterns demonstrated the ASR damage can be easily developed from the area with initial cracks and sharp corners. In conclusion, the images of glass power and fly ash samples showed significantly reduced ASR damage. This study showed that adding of SCMs can largely reduce ASR deterioration and thus facilitate the recycling glass particles into concrete.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Nitrogen addition alters the relative importance of roots and mycorrhizal hyphae in regulating soil organic carbon accumulation in a karst forest

Plant belowground carbon (C) inputs from roots and associated mycorrhizal hyphae are increasingly recognized as critical drivers impacting soil organic C (SOC) pool. However, whether roots and mycorrhizal hyphae differentially regulate SOC formation and accumulation under elevated nitrogen (N) deposition remains to be addressed. Using an ingrowth-core technique, the relative contributions of roots and mycorrhizal hyphae to SOC accumulation were distinguished and quantified in a karst forest receiving three levels of N additions (control (0 kg N ha -1 yr -1 ), low N (150 kg N ha -1 yr -1 ) and high N (300 kg N ha -1 yr -1 )). Here our results showed that N addition stimulated SOC accumulation (indicated by the increase of both bulk SOC and mineral associated organic C fraction) influenced by both roots and hyphae, especially for higher N doses. Moreover, N addition increased the contribution of the root effect relative to the hyphal effect in the SOC accrual. The correlation analysis showed that, for the hyphal effect, the change in SOC content was solely and positively correlated with the change in protective mineral phases of SOC, but not with the microbial necromass. In contrast, for the root effect, the change in SOC content was significantly and positively correlated with the changes in both soil microbial C pump efficacy and protective mineral phases of SOC. These results suggest that roots and mycorrhizal hyphae may influence the accumulation of microbial necromass and the formation of mineral-organic associations in a different magnitude under enhanced N supply. These findings advance our understanding of the root-mycorrhizal interactions in mediating SOC dynamics in forests under future N deposition scenarios.

54 ENVIRONMENTAL SCIENCES↗

Production of high-quality polyethylene (PE) films from post-consumer shrink wrap with solvent targeted recovery and precipitation (STRAP)

The solvent-targeted recovery and precipitation (STRAP™) process separates polymers from contaminants present in the feedstock. In this work, we demonstrate the recyclability of a post-consumer waste (PCW) shrink wrap that contains inks, adhesives, and paper using STRAP. We produced a clear rPE cast film from the PCR shrink wrap with no visual contamination from paper or inks. STRAP decreased the ash content from 0.96 wt% to 0.24 wt%. A techno-economic analysis (TEA) shows that a STRAP plant processing 50,000 metric tons annually of shrink wrap waste (purchased at $\$0.25$/kg) containing 85 wt% PE can achieve an IRR of 16.2% when selling rPE at $\$1.30$/kg, an IRR of 10.7% with an rPE price of $\$1.00$/kg, or an IRR of 3.79% with an rPE price of $\$0.70$/kg. Furthermore, the life cycle assessment (LCA) shows a 64% reduction in global warming potential (kg CO 2 equivalent) when compared to the production of virgin LDPE. As a result, this work shows how feedstocks with insoluble impurities can be recycled using STRAP on a large scale.

Radkevich, Elizaveta [University of Wisconsin-Madi↗

Quaternary Ammonium-Functionalized Poly(Arylene Ether Sulfone) Random Copolymers for Direct Air Capture

Direct air capture (DAC) is a promising tool for reducing CO 2 concentrations in the atmosphere and fighting climate change. We synthesized a series of quaternary ammonium (QA) functionalized poly(arylene ether sulfone) copolymers with varying mole fractions of charge content and demonstrated their potential as sorbents for DAC. Molecular weight analysis determined high monomer conversion was achieved in <6 h and relatively high molecular weights for all copolymer compositions. Thermal analysis revealed all polymers had degradation temperatures >240 °C and a single glass transition temperature (T g ); the T g decreased with an increase in ion exchange capacity (IEC). Fractional free volume and water uptake percentage increased and water contact angle decreased with the number of QA sites when compared to a neutral, commercially available polysulfone (Udel® P-1700 PSU). Next, the novel series of ammonium-functionalized copolymers exhibited a moisture-mediated capture and release of atmospheric CO 2 . When exposed to air containing 30% relative humidity the polymers captured CO 2 and the capacity increased with the IEC. When the relative humidity was increased to 95% the samples released the CO 2 . This study demonstrates a promising CO 2 DAC sorbent and highlights the possibility for continuous DAC with purpose-built free-standing membranes.

42 ENGINEERING↗

Reduction of Hg(II) to Hg(0) by Magnetite

Mercury (Hg) is a highly toxic element, and its contamination of groundwater presents a significant threat to terrestrial ecosystems. Understanding the geochemical processes that mediate mercury transformations in the subsurface is necessary to predict its fate and transport. In this study, we investigated the redox transformation of mercuric Hg (Hg[II]) in the presence of the Fe(II)/Fe(III) mixed valence iron oxide mineral magnetite. Kinetic and spectroscopic experiments were performed to elucidate reaction rates and mechanisms. The experimental data demonstrated that reaction of Hg(II) with magnetite results in the loss of Hg(II) and the formation of volatile elemental Hg (Hg[0]). Kinetic experiments showed that Hg(II) reduction occurred within minutes, with reaction rates increasing with increasing magnetite suspension density (0.05 to 0.2 g/L) and solution pH (4.8 to 6.7), and decreasing with increasing chloride concentration (10-6 to 10-2 mol/L). Mössbauer spectroscopic analysis of reacted magnetite samples revealed a decrease in Fe(II) content, corresponding the oxidation of Fe(II) to Fe(III) in the magnetite structure. X-ray photoelectron spectroscopy detected the presence of Hg(II) on magnetite surfaces, suggesting that adsorption is involved in the electron transfer process. These results suggest that Hg(II) reaction with solid-phase Fe(II) is a kinetically favorable pathway for Hg(II) reduction in magnetite-bearing environmental systems.

54 ENVIRONMENTAL SCIENCES↗

A mechanistic study of cellulase adsorption onto lignin

To explore the effect of lignin composition on cellulase adsorption, here dehydrogenation polymers (DHPs) were prepared from p-glucocoumaryl alcohol/coniferin/syringin, giving rise to H-DHP, G-DHP, and S-DHP, respectively. The structures of DHPs were thoroughly characterized and compared by GPC and NMR techniques, and the Langmuir isotherm protocol was applied to determine the cellulase adsorption behaviors of these different types of DHPs. The adsorption study indicated that the binding strength between the DHPs and cellulase varied in the following order: G-DHP > H-DHP > S-DHP. The inhibition of different types of DHPs on enzymatic hydrolysis of cellulose was in the same order as the cellulase adsorption, indicating that non-productive adsorption was the main way to influence cellulase. The correlation analysis results showed a positive association between the phenolic hydroxyl group content in DHPs and their maximum adsorption capacity toward enzymes. A negative correlation between the PDI and binding strength was also observed. It was also found that the adsorbed cellulase could be desorbed and retained normal enzyme activity, and so it was presumed that DHPs and cellulase were mainly linked by physisorption such as hydrogen bonding. This study clearly showed that the composition of lignin had a great impact on cellulase, and that G-type lignin exhibited the most detrimental effect. The results could provide useful information on the mechanism of cellulase adsorption onto lignin using DHPs as lignin model compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible photoluminescence from plasma-synthesized SiO{sub 2}-buffered SiN{sub x} films: Effect of film thickness and annealing temperature

The effect of the film thickness and postannealing temperature on visible photoluminescence (PL) from SiN{sub x} films synthesized by plasma-assisted radio frequency magnetron sputtering on SiO{sub 2} buffer layers is investigated. It is shown that strong visible PL is achieved at annealing temperatures above 650 deg. C. The optimum annealing temperature for the maximum PL yield strongly depends on the film thickness and varies from 800 to 1200 deg. C. A comparative composition-structure-property analysis reveals that the PL intensity is directly related to the content of the Si-O and Si-N bonds in the SiN{sub x} films. Therefore, sufficient oxidation and moderate nitridation of SiN{sub x}/SiO{sub 2} films during the plasma-based growth process are crucial for a strong PL yield. Excessively high annealing temperatures lead to weakened Si-N bonds in thinner SiN{sub x} films, which eventually results in a lower PL intensity.

36 MATERIALS SCIENCE↗

Evolution of mechanical properties in ErT{sub 2} thin films

The mechanical properties of rare earth tritide films evolve as tritium decays into {sup 3}He, which forms bubbles that influence long-term film stability in applications such as neutron generators. Ultralow load nanoindentation, combined with finite-element modeling to separate the mechanical properties of the thin films from their substrates, has been used to follow the mechanical properties of model ErT{sub 2} films as they aged. The size of the growing {sup 3}He bubbles was followed with transmission electron microscopy, while ion beam analysis was used to monitor total T and {sup 3}He content. The observed behavior is divided into two regimes: a substantial increase in layer hardness but elasticity changed little over {approx}18 months, followed by a decrease in elastic stiffness and a modest decease in hardness over the final 24 months. We show that the evolution of properties is explained by a combination of dislocation pinning by the bubbles, elastic softening as the bubbles occupy an increasing fraction of the material, and details of bubble growth modes.

36 MATERIALS SCIENCE↗

Synthesis and characterization of nanocrystalline graphite from coconut shell with heating process

Graphite were synthesized and characterized by heating process of coconut shell with varying temperature (400, 800 and 1000°C) and holding time (3 and 5 hours). After heating process, the samples were characterized by X-ray diffraction (XRD) and analyzed by X'pert HighScore Plus Software, Scanning Electron Microcope-Energy Dispersive X-Ray (SEM-EDX) and Transmission Electron Microscope-Energy Dispersive X-Ray (TEM-EDX). Graphite and londsdaelite phase were analyzed by XRD. According to EDX analysis, the sample was heated in 1000°C got the highest content of carbon. The amorphous carbon and nanocrystalline graphite were observed by SEM-EDX and TEM-EDX.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of processing conditions on the morphology of expanded perlite/polypropylene composites

Perlite is an oversaturated, volcanic, glassy rock, which has chemically bound water from 2 to 5 wt%. Upon heating, perlite can be expanded up to 20 times of its original volume. Important applications are in the field of building industry, in refrigeration engineering or the pharmaceutical industry. As mineral filler in polymers, expanded perlite can increase the thermal conductivity, the viscosity and the mechanical properties of polypropylene composites. But there are still many challenges that must be analyzed to reach the full potential of those composites. This research work focuses on the morphology of expanded perlite/polypropylene (PP) compounds and the interactions between filler and polymer. To achieve good performance a homogenous dispersion of the filler in the polymer matrix is needed because the enhancement of the material correlates strongly with the morphology of the composite. Therefore it is necessary to characterize the microstructure of these materials in order to establish adequate structure-process-property relationships. The expanded perlite/PP composites were compounded with a co-rotating twin screw extruder Theysohn TSK 30/40D. For producing the closed cell expanded perlite a new technology, the bublon process, was used. For the material characterization two particles sizes were chosen and the filler content was varied at 5, 10 and 15 wt%. For the analysis of the effects of the screw geometry, two setups have been chosen for the processing of the materials. The produced materials were analyzed by scanning electron microscope (SEM) and tensile testing. The results show a reinforcement effect of the filler and differences in the inner structure of expanded perlite and in the morphology.

36 MATERIALS SCIENCE↗

Spectroscopic studies on diamond like carbon films synthesized by pulsed laser ablation

Hydrogen free Diamond like Carbon (DLC) thin films enriched with C-C sp{sup 3} bonding were grown on Si (111) substrates at laser pulse energies varying from 100 to 400 mJ (DLC-100, DLC-200, DLC-300, DLC-400), by Pulsed Laser Ablation (PLA) utilizing an Nd:YAG laser operating at fundamental wavelength. Structural, optical and morphological evolutions as a function of laser pulse energy were studied by micro Raman, UV-Vis spectroscopic studies and Atomic Force Microscopy (AFM), respectively. Raman spectra analysis provided critical clues for the variation in sp{sup 3} content and optical energy gap. The sp{sup 3} content was estimated using the FWHM of the G peak and found to be in the range of 62-69%. The trend of evolution of sp{sup 3} content matches well with the evolution of I{sub D}/I{sub G} ratio with pulse energy. UV-Vis absorption study of DLC films revealed the variation of optical energy gap with laser pulse energy (1.88 – 2.23 eV), which matches well with the evolution of G-Peak position of the Raman spectra. AFM study revealed that roughness, size and density of particulate in DLC films increase with laser pulse energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of Numerical Hydrodynamics in Turbulent Mixing Transition Simulations

Underresolved simulations are unavoidable in high Reynolds (Re) and Mach (Ma) number turbulent flow applications at scale. Implicit large-Eddy simulation (ILES) often becomes the effective strategy to capture the dominating effects of convectively driven flow instabilities. We evaluate the impact of three distinct numerical strategies in simulations of transition and turbulence decay with ILES: the Harten–Lax–van Leer (HLL) Riemann solver applying Strang splitting and a Lagrange-plus-Remap formalism to solve the directional sweep—denoted split; the Harten–Lax–Van Leer-Contact (HLLC) Riemann solver using a directionally unsplit strategy and parabolic reconstruction—denoted unsplit; and the HLLC Riemann solver using unsplit and a low-Ma correction (LMC)—denoted unsplit*. Three case studies are considered: (1) a shock tube problem prototyping shock-driven turbulent mixing, (2) the Taylor–Green Vortex (TGV) prototyping transition to turbulence, and, (3) an homogeneous isotropic turbulence (HIT) case, focusing on the impact of discretization on transition and decay from fixed well-characterized initial conditions. Significantly more accurate predictions are provided by the unsplit schemes, in particular, when augmented with the LMC. For given resolution, only the unsplit schemes predict the turbulent mixing transition after reshock observed in the shock tube experiments. Relevant comparisons of ILES based on Euler and Navier–Stokes equations addressing potential occurrence of low-Re regimes in the applications are presented. Unsplit schemes are instrumental in allowing to capture the spatial development of the TGV flow and its validation at prescribed Re with significantly less resolution. HIT analysis confirms higher simulated turbulence Re and increased small-scale content associated with the unsplit discretizations.

74 ATOMIC AND MOLECULAR PHYSICS↗

SUNSPOT ROTATION, FLARE ENERGETICS, AND FLUX ROPE HELICITY: THE ERUPTIVE FLARE ON 2005 MAY 13

We use the Michelson Doppler Imager and TRACE observations of photospheric magnetic and velocity fields in NOAA 10759 to build a three-dimensional coronal magnetic field model. The most dramatic feature of this active region is the 34{sup 0} rotation of its leading polarity sunspot over 40 hr. We describe a method for including such rotation in the framework of the Minimum Current Corona model. We apply this method to the buildup of energy and helicity associated with the eruptive flare of 2005 May 13. We find that including the sunspot rotation almost triples the modeled flare energy (1.0 x 10{sup 31} erg) and flux rope self-helicity (-7.1 x 10{sup 42} Mx{sup 2}). This makes the results consistent with observations: the energy derived from GOES is 1.0 x 10{sup 31} erg, the magnetic cloud helicity from WIND is -5 x 10{sup 42} Mx{sup 2}. Our combined analysis yields the first quantitative picture of the helicity and energy content processed through a flare in an active region with an obviously rotating sunspot and shows that rotation dominates the energy and helicity budget of this event.

79 ASTRONOMY AND ASTROPHYSICS↗

Phenotypic plasticity in cell walls of maize brown midrib mutants is limited by lignin composition

The hydrophobic cell wall polymer lignin is deposited in specialized cells to make them impermeable to water and prevent cell collapse as negative pressure or gravitational force is exerted. The variation in lignin subunit composition that exists among different species, and among different tissues within the same species suggests that lignin subunit composition varies depending on its precise function. In order to gain a better understanding of the relationship between lignin subunit composition and the physico-chemical properties of lignified tissues, detailed analyses were performed of near-isogenic brown midrib2 (bm2), bm4, bm2-bm4, and bm1-bm2-bm4 mutants of maize. This investigation was motivated by the fact that the bm2-bm4 double mutant is substantially shorter, displays drought symptoms even when well watered, and will often not develop reproductive organs, whereas the phenotypes of the individual bm single mutants and double mutant combinations other than bm2-bm4 are only subtly different from the wild-type control. Detailed cell wall compositional analyses revealed mid-rib-specific reductions in Klason lignin content in the bm2, bm4, and bm2-bm4 mutants relative to the wild-type control, with reductions in both guaiacyl (G)- and syringyl (S)-residues. The cellulose content was not different, but the reduction in lignin content was compensated by an increase in hemicellulosic polysaccharides. Linear discriminant analysis performed on the compositional data indicated that the bm2 and bm4 mutations act independently of each other on common cell wall biosynthetic steps. After quantitative analysis of scanning electron micrographs of midrib sections, the variation in chemical composition of the cell walls was shown to be correlated with the thickness of the sclerenchyma cell walls, but not with xylem vessel surface area. The bm2-bm4 double mutant represents the limit of phenotypic plasticity in cell wall composition, as the bm1-bm2-bm4 and bm2-bm3-bm4 mutants did not develop into mature plants, unlike the triple mutants bm1-bm2-bm3 and bm1-bm3-bm4.

54 ENVIRONMENTAL SCIENCES↗

Atom Probe Tomography Investigation of Clustering in Model P 2 O 5 -Doped Borosilicate Glasses for Nuclear Waste Vitrification

Atom probe tomography (APT) has been utilized to investigate the microstructure of two model borosilicate glasses designed to understand the solubility limits of phosphorous pentoxide (P 2 O 5 ). This component is found in certain high-level radioactive defence wastes destined for vitrification, where phase separation can potentially lead to a number of issues relating to the processing of the glass and its long-term chemical and structural stability. The development of suitable focused ion beam (FIB)-preparation routes and APT analysis conditions were initially determined for the model glasses, before examining their detailed microstructures. In a 3.0 mol% P 2 O 5 -doped glass, both visual inspection and sensitive statistical analysis of the APT data show homogeneous microstructures, while raising the content to 4.0 mol% initiates the formation of phosphorus-enriched nanoscale precipitates. This study confirms the expected inhomogeneities and phase separation of these glasses and offers routes to characterizing these at near-atomic scale resolution using APT.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Giant topological Hall effect in centrosymmetric tetragonal Mn 2–x Zn x Sb

Topological magnetism typically appears in noncentrosymmetric compounds or compounds with geometric frustration. Here, we report the effective tuning of magnetism in centrosymmetric tetragonal Mn 2–x Zn x Sb by Zn substitution. The magnetism is found to be closely coupled to the transport properties, giving rise to a very large topological Hall effect with fine-tuning of Zn content, which even persists to high temperature (~250K). The further magnetoentropic analysis suggests that the topological Hall effect is possibly associated with topological magnetism. Furthermore, our finding suggests Mn 2–x Zn x S is a candidate material for a centrosymmetric tetragonal topological magnetic system, offering opportunities for studying and tuning spin textures and developing near room temperature spin-based devices.

36 MATERIALS SCIENCE↗

Physical vapor deposition synthesis of tungsten monocarbide (WC) thin films on different carbon substrates

The synthesis of tungsten monocarbide (WC) thin films has been performed by physical vapor deposition on various substrates including glassy carbon, carbon fiber sheet, carbon foam, and carbon cloth. The WC and W{sub 2}C phase contents of these films have been evaluated with bulk and surface analysis techniques such as x-ray diffraction, x-ray photoelectron spectroscopy, and scanning electron microscopy. These characterization techniques were also used to determine the effects of synthesis by nonreactive and reactive sputtering. The synthesis of WC particles supported on the carbon fiber substrate has also been accomplished using the temperature programmed reaction method. Overall, the results demonstrate that the phase purity of tungsten carbides can be controlled by the deposition environment and annealing temperatures.

36 MATERIALS SCIENCE↗

Metabolic engineering of energycane to hyperaccumulate lipids in vegetative biomass

Abstract Background The metabolic engineering of high-biomass crops for lipid production in their vegetative biomass has recently been proposed as a strategy to elevate energy density and lipid yields for biodiesel production. Energycane and sugarcane are highly polyploid, interspecific hybrids between Saccharum officinarum and Saccharum spontaneum that differ in the amount of ancestral contribution to their genomes. This results in greater biomass yield and persistence in energycane, which makes it the preferred target crop for biofuel production. Results Here, we report on the hyperaccumulation of triacylglycerol (TAG) in energycane following the overexpression of the lipogenic factors Diacylglycerol acyltransferase 1-2 ( DGAT 1-2) and Oleosin 1 ( OLE 1) in combination with RNAi suppression of SUGAR-DEPENDENT 1 ( SDP 1) and Trigalactosyl diacylglycerol 1 ( TGD 1). TAG accumulated up to 1.52% of leaf dry weight (DW,) a rate that was 30-fold that of non-modified energycane, in addition to almost doubling the total fatty acid content in leaves to 4.42% of its DW. Pearson’s correlation analysis showed that the accumulation of TAG had the highest correlation with the expression level of ZmDGAT 1-2, followed by the level of RNAi suppression for SDP 1. Conclusions This is the first report on the metabolic engineering of energycane and demonstrates that this resilient, high-biomass crop is an excellent target for the further optimization of the production of lipids from vegetative tissues.

1-2↗