Search NASA⌕ Search

SEARCH · Search NASA

Results for “coupling coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Deployment of neural-network-based neutron microscopic cross sections in the Griffin reactor physics application

The capability to utilize neural networks to predict macroscopic and microscopic cross section parametric spaces has been developed for the Griffin reactor physics application. The LibTorch interface enables Griffin's MOOSE-based materials to interact with LibTorch-trained models, allowing for the evaluation of complex macroscopic or microscopic cross section spaces, which are then used to evaluate the neutronic properties of the Griffin finite element model. This study benchmarks traditional ISOXML-formatted tabulation libraries against neural network-based models for 279 nuclides on 20,160 grid points for zero-dimensional and two-dimensional reactor models. Benchmark metrics include the fundamental mode eigenvalue, fission and absorption rates, and various temperature coefficients of reactivity (isothermal, fuel, and moderator). From the perspective of storage space, the complete set of LibTorch models uses 11 MB on disk, compared to the 10 GB for the ISOXML multigroup library that covers the same grid space. For the two-dimensional performance case considered in Griffin, the Torch model uses 97% less RAM than the reference ISOXML dataset while runtime increases by a factor of 3 when using the LibTorch model compared to the ISOXML dataset with multi-linear interpolation. The LibTorch model consistently yields errors within 0.01% for most analyzed quantities except for the temperature coefficients of reactivity where the maximum discrepancies are up to 0.3 $\frac{pcm}{K}$. Due to the neural network attempting to best predict quantities with no regard for a positive or negative bias for any given quantity, predictions may experience random fluctuations, resulting in both positive and negative errors. Future work will entail both depletion and coupled transient analysis to determine the predictive capabilities of Griffin with neural network-based cross sections.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Electronic and thermoelectric properties of van der Waals materials with ring-shaped valence bands

The valence band of a variety of few-layer, two-dimensional materials consist of a ring of states in the Brillouin zone. The energy-momentum relation has the form of a “Mexican hat” or a Rashba dispersion. The two-dimensional density of states is singular at or near the band edge, and the band-edge density of modes turns on nearly abruptly as a step function. The large band-edge density of modes enhances the Seebeck coefficient, the power factor, and the thermoelectric figure of merit ZT. Electronic and thermoelectric properties are determined from ab initio calculations for few-layer III–VI materials GaS, GaSe, InS, InSe, for Bi{sub 2}Se{sub 3}, for monolayer Bi, and for bilayer graphene as a function of vertical field. The effect of interlayer coupling on these properties in few-layer III–VI materials and Bi{sub 2}Se{sub 3} is described. Analytical models provide insight into the layer dependent trends that are relatively consistent for all of these few-layer materials. Vertically biased bilayer graphene could serve as an experimental test-bed for measuring these effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Energy exchange in strongly coupled plasmas with electron drift

In this paper, the generalized viscoelastic collisional quantum hydrodynamic model is employed in order to investigate the linear dielectric response of a quantum plasma in the presence of strong electron-beam plasma interactions. The generalized Chandrasekhar's relativistic degeneracy pressure together with the electron-exchange and Coulomb interaction effects are taken into account in order to extend current research to a wide range of plasma number density relevant to big planetary cores and astrophysical compact objects. The previously calculated shear viscosity and the electron-ion collision frequencies are used for strongly coupled ion fluid. The effect of the electron-beam velocity on complex linear dielectric function is found to be profound. This effect is clearly interpreted in terms of the wave-particle interactions and their energy-exchange according to the sign of the imaginary dielectric function, which is closely related to the wave attenuation coefficient in plasmas. Such kinetic effect is also shown to be in close connection with the stopping power of a charged-particle beam in a quantum plasma. The effect of many independent plasma parameters, such as the ion charge-state, electron beam-velocity, and relativistic degeneracy, is shown to be significant on the growing/damping of plasma instability or energy loss/gain of the electron-beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Permutation invariant polynomial neural network based diabatic ansatz for the ( E + A ) × ( e + a ) Jahn–Teller and Pseudo-Jahn–Teller systems

In this work, the permutation invariant polynomial neural network (PIP-NN) approach is employed to construct a quasi-diabatic Hamiltonian for system with non-Abelian symmetries. It provides a flexible and compact NN-based diabatic ansatz from the related approach of Williams, Eisfeld, and co-workers. The example of $H^3_+$ is studied, which is an (E + A) × (e + a) Jahn–Teller and Pseudo-Jahn–Teller system. The PIP-NN diabatic ansatz is based on the symmetric polynomial expansion of Viel and Eisfeld, the coefficients of which are expressed with neural network functions that take permutation-invariant polynomials as input. This PIP-NN-based diabatic ansatz not only preserves the correct symmetry but also provides functional flexibility to accurately reproduce ab initio electronic structure data, thus resulting in excellent fits. Further, the adiabatic energies, energy gradients, and derivative couplings are well reproduced. A good description of the local topology of the conical intersection seam is also achieved. Therefore, this diabatic ansatz completes the PIP-NN based representation of DPEM with correct symmetries and will enable us to diabatize even more complicated systems with complex symmetries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating Anisotropic Quantum Hall States with Bimetric Geometry

We construct a low energy effective theory of anisotropic fractional quantum Hall (FQH) states. We develop a formalism similar to that used in the bimetric approach to massive gravity, and apply it to describe Abelian anisotropic FQH states in the presence of external electromagnetic and geometric backgrounds. We derive a relationship between the shift, the Hall viscosity, and a new quantized coupling to anisotropy, which we term anisospin. We verify this relationship by numerically computing the Hall viscosity for a variety of anisotropic quantum Hall states using the density matrix renormalization group. Finally, we apply these techniques to the problem of nematic order and clarify certain disagreements that exist in the literature about the meaning of the coefficient of the Berry phase term in the nematic effective action.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fourier Analysis and Loss Modeling for Inductive Wireless Electric Vehicle Charging with Reduced Stray Field

With the growth of electric vehicle (EV) popularity, different charging options to increase user convenience and reduce charging times are being considered and researched. Among these, inductive wireless power transfer (WPT) systems for EVs are being designed to meet specifications such as stray field, power level, efficiency, misalignment tolerance, and ground clearance, which are all heavily influenced by the coil geometry. The proposed Fourier Analysis Method (FAM) is an analytical method to directly design coil geometries to meet stray field and power level requirements through an optimization of Fourier basis function coefficients. The outputs of the optimization are complex, planar coil geometries that meet the power level and stray field constraints with minimized loss factors. Contours of these potentials determine the coil conductor paths and loss models predict the system efficiency and performance over misalignment. The Fourier representation of the geometry is used to conveniently calculate the coupling over misalignment, external proximity effect loss, and ferrite loss. A 6.6 kW prototype WPT system with low stray field and high efficiency is built from the optimization results to validate the models and showcase the usefulness of the FAM design approach.

33 ADVANCED PROPULSION SYSTEMS↗

Initial study on cross-section generation requirements for a PBR equilibrium core

A Serpent model of the equilibrium core HTR-PM small modular nuclear reactor in China, was developed for use in cross-section preparation studies in order to guide methods development for the Griffin reactor multiphysics application. The model includes detailed isotopics for 10 distinct pebble burnup groups in 126 core zones with unique fuel and moderator temperatures obtained from a coupled neutronics-thermal-fluids equilibrium core calculation using Griffin-Pronghorn. A sensitivity study of the fuel and moderator temperatures for various core regions was performed with the MOOSE stochastic tools. The results show that the uncertainties are, not unexpectedly, dominated by the value of the fluid temperature and that the power level, heat transfer coefficient and effective conduction to neighboring pebbles and fluid constitute, at best, second order effects. The temperature uncertainty range varies from 28 K to 57 K between the core entry and exit planes, respectively, but these values are probably higher. We still have to quantify the significance of these uncertainties in the preparation of cross-sections in future work. In addition, we verified that the effective pebble approximation used in the PEBBED and V.S.O.P. computer codes works well for the preparation of region averaged cross-sections. Nevertheless, there are some discrepancies in the cross-sections when compared to the multi-pebble model, which could affect the prediction of peak values and the depletion calculation. We conclude that is highly desirable for future studies with Griffin to be able to handle both the 'effective' pebble approximation and the multi-pebble approach for various pebble burnup groups. This enables Griffin users with the flexibility to perform higher-fidelity studies. Finally, we initiated the preparation of cross-sections for various core regions from the full core Serpent reference model. We quantified the differences in 26 group cross-sections from infinite domain models versus the full core approach. These reference cross-sections will serve to verify the double heterogeneity, self-shielding, and spectrum-correction methods in Griffin. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A jet fuel surrogate formulated by real fuel properties

An implicit methodology based on chemical group theory to formulate a jet aviation fuel surrogate by the measurements of several combustion related fuel properties is tested. The empirical formula and derived cetane number of an actual aviation fuel, POSF 4658, have been determined. A three component surrogate fuel for POSF 4658 has been formulated by constraining a mixture of n-decane, iso-octane and toluene to reproduce the hydrogen/carbon ratio and derived cetane number of the target fuel. The validity of the proposed surrogate is evaluated by experimental measurement of select combustion properties of POSF 4658, and the POSF 4658 surrogate. (1)A variable pressure flow reactor has been used to chart the chemical reactivity of stoichiometric mixtures of POSF 4658/O{sub 2}/N{sub 2} and POSF 4658 surrogate/O{sub 2}/N{sub 2} at 12.5 atm and 500-1000 K, fixing the carbon content at 0.3% for both mixtures. (2)The high temperature chemical reactivity and chemical kinetic-molecular diffusion coupling of POSF 4658 and POSF 4658 surrogate have been evaluated by measurement of the strained extinction limit of diffusion flames. (3)The autoignition behavior of POSF 4658 and POSF 4658 surrogate has been measured with a shock tube at 674-1222 K and with a rapid compression machine at 645-714 K for stoichiometric mixtures of fuel in air at pressures close to 20 atm. The flow reactor study shows that the character and extent of chemical reactivity of both fuels at low temperature (500-675 K) and high temperature (900 K+) are extremely similar. Slight differences in the transition from the end of the negative temperature coefficient regime to hot ignition are observed. The diffusion flame strained extinction limits of the fuels are observed to be indistinguishable when compared on a molar basis. Ignition delay measurements also show that POSF 4658 exhibits NTC behavior. Moreover, the ignition delays of both fuels are also extremely similar over the temperature range studied in both shock tube and rapid compression machine experiments. A chemical kinetic model is constructed and utilized to interpret the experimental observations and provides a rationale as to why the real fuel and surrogate fuel exhibit such similar reactivity. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling X-Ray Thomson Scattering Spectra of Warm Dense Matter

Warm dense matter (WDM) is sometimes described as a \solid density plasma" where neither weakly coupled plasma theory nor condensed matter theory are applicable. More specifically, WDM has densities of ~ 0:1 - 50 times solid density, temperatures of ~ 1 - 100 eV, is partially ionized, globally neutral, has strongly correlated particles (due to interactions), and partial electron degeneracy. In nature, WDM may be found in the interiors of planets such as Jupiter or in the envelopes of white dwarf stars, and in man-made processes such as inertial confinement fusion (ICF), WDM exists as a transient state of matter. To model these physical systems, the equation of state as well as opacity, conductivity, and diffusion coefficients must be known. Experimentally WDM is probed with an experimental technique known as X-Ray Thomson Scattering (XRTS). In such an experiment X-rays photons are scattered off of WDM and the resulting photons are measured at a given solid angle. The resulting spectrum gives information on the density and temperature of WDM, but a model of WDM and the scattering experiment is often required to interpret the results. As a result, these experiments also serve as a method of validation for potential models of WDM. The work presented here focuses on the model of WDM proposed by Starrett and Saumon and a model for scattering based off of Chihara’s work. The model proposed by Starrett and Saumon is an average-atom model that is coupled with a two component plasma model, hereafter referred to as an AA+TCP model. The AA+TCP model is an ab initio model with no free parameters, only requiring knowledge of the element under investigation, the density, and the temperature. The outputs from the model completely determine all the input parameters needed for Chihara’s structure function (chemical potential, elastic feature, screening potential, bound-state wavefunctions, and free wavefunctions), which in turn determines the double differential scattering cross-section of the experiment. This approach to determining the outcome of an XRTS experiment parallels that of Johnson, et al., but expands the work in many respects. For example, the AA+TCP model completely determines all the input parameters to the structure function; hence no ad hoc approximations are necessary to close the system. Also, the free-electron feature and the bound-free feature are modified to include collisions and occupation of free electron states, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Search for same-charge top-quark pair production in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for the production of top-quark pairs with the same electric charge ($tt$ or $\overline{tt}$) is presented. The analysis uses proton-proton collision data at $\sqrt{s}$ = 13 TeV, recorded by the ATLAS detector at the Large Hadron Collider, corresponding to an integrated luminosity of 140 fb −1 . Events with two same-charge leptons and at least two b-tagged jets are selected. Neural networks are employed to define two selections sensitive to additional couplings beyond the Standard Model that would enhance the production rate of same-sign top-quark pairs. No significant signal is observed, leading to an upper limit on the total production cross-section of same-sign top-quark pairs of 1.6 fb at 95% confidence level. Corresponding limits on the three Wilson coefficients associated with the $\mathcal{O}^{(1)}_{tu}$, $\mathcal{O}^{(1)}_{Qu}$, and $\mathcal{O}^{(8)}_{Qu}$ operators in the Standard Model Effective Field Theory framework are derived.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Propagation of elastic waves in a flexomagnetic solid

Flexomagnetism is the coupling between magnetism and strain gradients and is a technologically relevant phenomenon. We present a theory of elastic wave propagation in a linear elastic flexomagnetic material with microstructure and strain gradient elastic interactions. The expressions of frequency, phase velocity, and group velocity of longitudinal and transverse waves are derived and are shown to depend on the flexomagnetic coefficient and microstructure. We also show that the effect of flexomagnetism and microstructure can lead to some interesting phenomena in wave propagation, which are not observed in classical linear elasticity theory of waves. Specifically, in contrast to classical linear elastic materials, where wave propagation is non-dispersive, flexomagnetic materials with microstructure can exhibit both normal and abnormal dispersion. It is also noteworthy that, in flexomagnetic materials with gradient elasticity, the phase velocities of transverse waves can exceed those of longitudinal waves, which is atypical in classical elasticity. Furthermore, waves can also attenuate for a certain range of wavenumbers that depend on the flexomagnetic coefficient and microstructural parameters. Finally, we explore the possibility of waves exhibiting zero group velocity modes, where waves are non-propagating but have strong local energy confinement, negative group velocity modes, where the wave packet moves in the opposite direction to that of wave propagation, and the phenomenon of wave freezing, where a propagating wave stops in space without diffusing or spreading.

Ghosh, Swarnava [ORNL] (ORCID:0000000338005264)↗

Pore connectivity influences mass transport in natural rocks: Pore structure, gas diffusion and batch sorption studies

For this work, six rocks (one granodiorite, one limestone, two chalks, one mudstone, and one dolostone) with different extents of heterogeneity at six different particle sizes (from 75 to 8000 μm) were studied to describe the effects of pore connectivity on mass transport. The methods applied were (i) porosity measurement of granular rocks, (ii) analyses of gas-phase diffusive transport in a bed of packed particles, along with a solid quartz method at these six particle sizes being developed to identify the contribution of intraparticle diffusion, and (iii) batch sorption tests of multiple ions (anions and cations) with subsequent analyses of inductively coupled plasma-mass spectrometry. Granular porosity measurement results reveal that with decreasing particle sizes, the effective porosities for the “heterogenous” group of rocks (Grimsel granodiorite and Edwards limestone) increase, whereas the porosities of another “homogeneous” group (two Israel chalk samples, Japan mudstone, and Wyoming dolostone) remain constant. Gas diffusion results show that the intraparticle gas diffusion coefficient among these two sample groups, varying in the magnitude of 10 -8 to 10 -6 m 2 /s, are not directly correlated to the porosity differences. Moreover, the batch sorption work displays a different affinity of rocks for various tracers. For Grimsel granodiorite, Japan mudstone, and Wyoming dolostone, the adsorption capacity of Sm 3+ and Eu 3+ increases as the particle size decreases. In general, this integrated research of grain size distribution, granular rock porosity, intraparticle diffusivity, and ionic sorption capacity gives insights into the pore connectivity effect on both physical and chemical transport behaviors for different lithologies and/or different particle sizes.

58 GEOSCIENCES↗

Preheating ablation effects on the Rayleigh-Taylor instability in the weakly nonlinear regime

The two-dimensional Rayleigh-Taylor instability (RTI) with and without thermal conduction is investigated by numerical simulation in the weakly nonlinear regime. A preheat model {kappa}(T)={kappa}{sub SH}[1+f(T)] is introduced for the thermal conduction [W. H. Ye, W. Y. Zhang, and X. T. He, Phys. Rev. E 65, 057401 (2002)], where {kappa}{sub SH} is the Spitzer-Haerm electron thermal conductivity coefficient and f(T) models the preheating tongue effect in the cold plasma ahead of the ablation front. The preheating ablation effects on the RTI are studied by comparing the RTI with and without thermal conduction with identical density profile relevant to inertial confinement fusion experiments. It is found that the ablation effects strongly influence the mode coupling process, especially with short perturbation wavelength. Overall, the ablation effects stabilize the RTI. First, the linear growth rate is reduced, especially for short perturbation wavelengths and a cutoff wavelength is observed in simulations. Second, the second harmonic generation is reduced for short perturbation wavelengths. Third, the third-order negative feedback to the fundamental mode is strengthened, which plays a stabilization role. Finally, on the contrary, the ablation effects increase the generation of the third harmonic when the perturbation wavelengths are long. Our simulation results indicate that, in the weakly nonlinear regime, the ablation effects are weakened as the perturbation wavelength is increased. Numerical results obtained are in general agreement with the recent weakly nonlinear theories as proposed in [J. Sanz, J. Ramirez, R. Ramis et al., Phys. Rev. Lett. 89, 195002 (2002); J. Garnier, P.-A. Raviart, C. Cherfils-Clerouin et al., Phys. Rev. Lett. 90, 185003 (2003)].

36 MATERIALS SCIENCE↗

High Thermoelectric Power Factor and Efficiency from a Highly Dispersive Band in Ba 2 BiAu

With first-principles calculations based on density-functional theory, we predict the potential for the unprecedentedly high thermoelectric figure of merit zT = 5 at 800 K in an n-type Ba 2 BiAu full-Heusler compound. Such a high efficiency arises from an intrinsically ultralow lattice thermal conductivity coupled with a very high power factor reaching 7 mW m –1 K –2 at 500 K. The high n-type power factor originates from a light, sixfold degenerate conduction-band pocket along the Γ-X direction. Weak acoustic phonon scattering and sixfold multiplicity combine to yield both high mobility and a high Seebeck coefficient. In contrast, the flat-and-dispersive (or low-dimensional) valence band of Ba 2 BiAu fails to generate such high power factors due to strong acoustic phonon scattering. We note the Lorenz numbers at optimal doping are smaller than theWiedemann-Franz value, an integral feature for zT enhancement as electrons are the majority heat carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Water Infiltration and Solute Transport in An Unsaturated Underground Porous Environment - 18442

Water flow and contaminant transport in an unsaturated porous medium are studied by solving the Richards equation for the moisture movement and the convective-dispersive transport of contaminant by using the software HYDRUS 1D for prescribed head condition at the top boundary of a soil layer: a single peak and two peaks of finite duration. While the moisture migration is solved separately, the contaminant transport is coupled to moisture movement. Due to unsaturated nature of the medium the downward water flux in the soil shows vertical variation. The movement of contaminant concentration disturbance is slowed down as it moves downwards. For two separated head peaks in time, the two concentration peaks merge into one and this tendency takes place faster for larger sorption coefficient. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ionic Liquid Gating Control of Spin Reorientation Transition and Switching of Perpendicular Magnetic Anisotropy

Electric field (E–field) modulation of perpendicular magnetic anisotropy (PMA) switching, in an energy–efficient manner, is of great potential to realize magnetoelectric (ME) memories and other ME devices. Voltage control of the spin–reorientation transition (SRT) that allows the magnetic moment rotating between the out–of–plane and the in–plane direction is thereby crucial. In this work, a remarkable magnetic anisotropy field change up to 1572 Oe is achieved under a small operation voltage of 4 V through ionic liquid (IL) gating control of SRT in Au/[DEME]+[TFSI] – /Pt/(Co/Pt) 2 /Ta capacitor heterostructures at room temperature, corresponding to a large ME coefficient of 378 Oe V –1 . As revealed by both ferromagnetic resonance measurements and magnetic domain evolution observation, the magnetization can be switched stably and reversibly between the out–of–plane and in–plane directions via IL gating. The key mechanism, revealed by the first–principles calculation, is that the IL gating process influences the interfacial spin–orbital coupling as well as net Rashba magnetic field between the Co and Pt layers, resulting in the modulation of the SRT and in–plane/out–of–plane magnetization switching. In conclusion, this work demonstrates a unique IL–gated PMA with large ME tunability and paves a way toward IL gating spintronic/electronic devices such as voltage tunable PMA memories.

36 MATERIALS SCIENCE↗

Temperature dependence of heavy quark diffusion from (2+1)-flavor lattice QCD

We present a lattice determination of the heavy-quark diffusion coefficient in (2+1)-flavor QCD with almost physical quark masses. The momentum and spatial diffusion coefficients are extracted for a wide temperature range, from T = 163 MeV to 10 GeV. The results are in agreement with previous works from the HotQCD collaboration, and show fast thermalization of the heavy quark inside the QGP. Near the chiral crossover temperature T c ≃ 150 MeV, our results are close to the AdS/CFT estimation computed at strong coupling.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗