Search NASA⌕ Search

SEARCH · Search NASA

Results for “data processing steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Ionosphere-exosphere coupling through charge exchange and momentum transfer in hydrogen-proton collisions

The implications of a traditional assumption of exospheric physics, that collisions of hydrogen atoms and protons preferentially result in charge exchange with negligible momentum transfer are examined. Initially adopted as a necessary convenience to accommodate limited computer resources in exosphere model calculations, this approximation results in a direct transformation of the proton velocity distribution into a hot component of neutral hydrogen. With expanding computational facilities, the need for the approximation has passed. As the first step toward its replacement with a realistic, quantum mechanical model of the H - H(+) collision process, differential and cumulative cross sections were calculated for quantum elastic scattering of indistinguishable nuclei for a fine grid of encounter energies and scattering angles. These data are used to study the nature of ionosphere-exosphere coupling through H - H(+) collisions, and to demonstrate that the distribution of velocities of scattered H produced in the traditional exospheric charge exchange approximation, as well as that arising from an alternative, fluid dynamic approach, leads to unacceptable abundances of coronal atoms in long-term, highly elliptic trajectories.

Hodges, R. R., Jr.↗

Multi-Sensor Distributive On-Line Processing, Visualization, and Analysis Infrastructure for an Agricultural Information System at the NASA Goddard Earth Sciences DAAC

The Goddard Space Flight Center Earth Sciences Data and Information Services Center (GES DISC) Distributed Active Center (DAAC) is developing an Agricultural Information System (AIS), evolved from an existing TRMM On-line Visualization and Analysis System precipitation and other satellite data products and services. AIS outputs will be ,integrated into existing operational decision support system for global crop monitoring, such as that of the U.N. World Food Program. The ability to use the raw data stored in the GES DAAC archives is highly dependent on having a detailed understanding of the data's internal structure and physical implementation. To gain this understanding is a time-consuming process and not a productive investment of the user's time. This is an especially difficult challenge when users need to deal with multi-sensor data that usually are of different structures and resolutions. The AIS has taken a major step towards meeting this challenge by incorporating an underlying infrastructure, called the GES-DISC Interactive Online Visualization and Analysis Infrastructure or "Giovanni," that integrates various components to support web interfaces that ,allow users to perform interactive analysis on-line without downloading any data. Several instances of the Giovanni-based interface have been or are being created to serve users of TRMM precipitation, MODIS aerosol, and SeaWiFS ocean color data, as well as agricultural applications users. Giovanni-based interfaces are simple to use but powerful. The user selects geophysical ,parameters, area of interest, and time period; and the system generates an output ,on screen in a matter of seconds.

Teng, William↗

Accelerating Satellite Image Based Large-Scale Settlement Detection with GPU

Computer vision algorithms for image analysis are often computationally demanding. Application of such algorithms on large image databases\---- such as the high-resolution satellite imagery covering the entire land surface, can easily saturate the computational capabilities of conventional CPUs. There is a great demand for vision algorithms running on high performance computing (HPC) architecture capable of processing petascale image data. We exploit the parallel processing capability of GPUs to present a GPU-friendly algorithm for robust and efficient detection of settlements from large-scale high-resolution satellite imagery. Feature descriptor generation is an expensive, but a key step in automated scene analysis. To address this challenge, we present GPU implementations for three different feature descriptors\-- multiscale Historgram of Oriented Gradients (HOG), Gray Level Co-Occurrence Matrix (GLCM) Contrast and local pixel intensity statistics. We perform extensive experimental evaluations of our implementation using diverse and large image datasets. Our GPU implementation of the feature descriptor algorithms results in speedups of 220 times compared to the CPU version. We present an highly efficient settlement detection system running on a multiGPU architecture capable of extracting human settlement regions from a city-scale sub-meter spatial resolution aerial imagery spanning roughly 1200 sq. kilometers in just 56 seconds with detection accuracy close to 90\%. This remarkable speedup gained by our vision algorithm maintaining high detection accuracy clearly demonstrates that such computational advancements clearly hold the solution for petascale image analysis challenges.

Patlolla, Dilip Reddy↗

Chemical Looping Combustion Kinetics

One of the most promising methods of capturing CO{sub 2} emitted by coal-fired power plants for subsequent sequestration is chemical looping combustion (CLC). A powdered metal oxide such as NiO transfers oxygen directly to a fuel in a fuel reactor at high temperatures with no air present. Heat, water, and CO{sub 2} are released, and after H{sub 2}O condensation the CO{sub 2} (undiluted by N{sub 2}) is ready for sequestration, whereas the nickel metal is ready for reoxidation in the air reactor. In principle, these processes can be repeated endlessly with the original nickel metal/nickel oxide participating in a loop that admits fuel and rejects ash, heat, and water. Our project accumulated kinetic rate data at high temperatures and elevated pressures for the metal oxide reduction step and for the metal reoxidation step. These data will be used in computational modeling of CLC on the laboratory scale and presumably later on the plant scale. The oxygen carrier on which the research at Utah is focused is CuO/Cu{sub 2}O rather than nickel oxide because the copper system lends itself to use with solid fuels in an alternative to CLC called 'chemical looping with oxygen uncoupling' (CLOU).

01 COAL, LIGNITE, AND PEAT↗

Automating Rabi & Ramsey Measurements via ML

As quantum computers scale up, the manual process of qubit tune-up becomes increasingly impractical due to its time-consuming and repetitive nature. While existing research has explored some automation techniques, many models remain underutilized for this purpose. This research aims to answer the question: can qubit tune-up be automated using the Long Short-Term Memory (LSTM) model? For the purposes of this project, only the rabi and ramsey measurement cycle was automated. These measurements are used to fine-tune a rough qubit frequency by repeating them until the optimal qubit frequency is obtained. The LSTM model uses the qubit frequency at one time step to forecast the qubit frequency at the next time step. A rabi-ramsey simulation was made to fabricate a dataset to train and test the LSTM model. As the model was trained, the error of the model decreased. Although there wasn t enough training data to generate perfect predictions, this shows it is possible to utilize forecasting models in automating the tune-up process.

Roberts, Rachel↗

Automating Rabi & Ramsey Measurements via Machine Learning

As quantum computers scale up, the manual process of qubit tune-up becomes increasingly impractical due to its time-consuming and repetitive nature. While existing research has explored some automation techniques, many models remain underutilized for this purpose. This research aims to answer the question: can qubit tune-up be automated using the Long Short-Term Memory (LSTM) model? For the purposes of this project, only the rabi and ramsey measurement cycle was automated. These measurements are used to fine-tune a rough qubit frequency by repeating them until the optimal qubit frequency is obtained. The LSTM model uses the qubit frequency at one time step to forecast the qubit frequency at the next time step. A rabi-ramsey simulation was made to fabricate a dataset to train and test the LSTM model. As the model was trained, the error of the model decreased. Although there wasn't enough training data to generate perfect predictions, this shows it is possible to utilize forecasting models in automating the tune-up process.

Roberts, Rachel↗

Automating Rabi & Ramsey Measurements via ML

As quantum computers scale up, the manual process of qubit tune-up becomes increasingly impractical due to its time-consuming and repetitive nature. While existing research has explored some automation techniques, many models remain underutilized for this purpose. This research aims to answer the question: is qubit tune-up able to be automated using the Long Short-Term Memory (LSTM) model? For the purposes of this project, only the rabi and ramsey measurement cycle was automated. These measurements are used to fine-tune a rough qubit frequency by repeating them until the optimal qubit frequency is obtained. The LSTM model uses the qubit frequency at one time step to forecast the qubit frequency at the next time step. A rabi-ramsey simulation was made to fabricate a dataset to train and test the LSTM model. As the model was trained, the error of the model decreased. Although there wasn't enough training data to generate perfect predictions, this shows it is possible to utilize forecasting models in automating the tune-up process.

Roberts, Rachel↗

Acquisition, preprocessing, and reconstruction of ultralow dose volumetric CT scout for organ-based CT scan planning

Purpose: Traditionally, 2D radiographic preparatory scan images (scout scans) are used to plan diagnostic CT scans. However, a 3D CT volume with a full 3D organ segmentation map could provide superior information for customized scan planning and other purposes. A practical challenge is to design the volumetric scout acquisition and processing steps to provide good image quality (at least good enough to enable 3D organ segmentation) while delivering a radiation dose similar to that of the conventional 2D scout. Methods: The authors explored various acquisition methods, scan parameters, postprocessing methods, and reconstruction methods through simulation and cadaver data studies to achieve an ultralow dose 3D scout while simultaneously reducing the noise and maintaining the edge strength around the target organ. Results: In a simulation study, the 3D scout with the proposed acquisition, preprocessing, and reconstruction strategy provided a similar level of organ segmentation capability as a traditional 240 mAs diagnostic scan, based on noise and normalized edge strength metrics. At the same time, the proposed approach delivers only 1.25% of the dose of a traditional scan. In a cadaver study, the authors’ pictorial-structures based organ localization algorithm successfully located the major abdominal-thoracic organs from the ultralow dose 3D scout obtained with the proposed strategy. Conclusions: The authors demonstrated that images with a similar degree of segmentation capability (interpretability) as conventional dose CT scans can be achieved with an ultralow dose 3D scout acquisition and suitable postprocessing. Furthermore, the authors applied these techniques to real cadaver CT scans with a CTDI dose level of less than 0.1 mGy and successfully generated a 3D organ localization map.

60 APPLIED LIFE SCIENCES↗

Type Ia supernova observations combining data from the Euclid mission and the Vera C. Rubin Observatory

ABSTRACT The Euclid mission will provide first-of-its-kind coverage in the near-infrared over deep (three fields, ∼10–20 square degrees each) and wide (∼10 000 square degrees) fields. While the survey is not designed to discover transients, the deep fields will have repeated observations over a two-week span, followed by a gap of roughly six months. In this analysis, we explore how useful the deep field observations will be for measuring properties of Type Ia supernovae (SNe Ia). Using simulations that include Euclid’s planned depth, area, and cadence in the deep fields, we calculate that more than 3700 SNe between 0.0 < $z$ < 1.5 will have at least five Euclid detections around peak with signal-to-noise ratio larger than 3. While on their own, Euclid light curves are not good enough to directly constrain distances, when combined with legacy survey of space and time (LSST) deep field observations, we find that uncertainties on SN distances are reduced by 20–30 per cent for $z$ < 0.8 and by 40–50 per cent for $z$ > 0.8. Furthermore, we predict how well additional Euclid mock data can be used to constrain a key systematic in SN Ia studies – the size of the luminosity ‘step’ found between SNe hosted in high-mass (>1010 M⊙) and low-mass (<1010 M⊙) galaxies. This measurement has unique information in the rest-frame near-infrared (NIR). We predict that if the step is caused by dust, we will be able to measure its reduction in the NIR compared to optical at the 4σ level. We highlight that the LSST and Euclid observing strategies used in this work are still provisional and some level of joint processing is required. Still, these first results are promising, and assuming that Euclid begins observations well before the Nancy Roman Space Telescope (Roman), we expect this data set to be extremely helpful for preparation for Roman itself.

Astronomy & Astrophysics↗

Sustainable Energy Solutions Task 2.0: Wind Turbine Reliability and Maintainability Enhancement through System-wide Structure Health Monitoring and Modifications to Rotating Components

An evaluation of nondestructive structural health monitoring methods was completed with over 132 documents, 37 specifically about wind turbines, summarized into a technology matrix. This matrix lists the technology, what can be monitored with this technology, and gives a short summary of the key aspects of the technology and its application. Passive and active acoustic emission equipment from Physical Acoustics Corp. and Acellent Technologies have been evaluated and selected for use in experimental state loading and fatigue tests of composite wind turbine blade materials. Acoustic Emission (AE) and Active Ultrasonic Testing (AUT), were applied to composite coupons with both simulated and actual damage. The results found that, while composites are more complicated in nature, compared to metallic structures, an artificial neural network analysis could still be used to determine damage. For the AE system, the failure mode could be determined (i.e. fiber breakage, delamination, etc.). The Acellent system has been evaluated to work well with composite materials. A test-rig for reliability testing of the rotating components was constructed. The research on the types of bearings used in the wind turbines indicated that in most of the designs, the main bearings utilized to support the shaft are cylindrical roller bearings. The accelerated degradation testing of a population of bearings was performed. Vibration and acoustic emission data was collected and analyzed in order to identify a representative degradation signal for each bearing to identify the initiation of the degradation process in the bearings. Afterwards, the RMS of the vibration signal from degradation initiation up to the end of the useful life of the bearing was selected to predict the remaining useful life of the bearing. This step included fitting Autoregressive Moving Average (ARMA) models to the degradation signals and approximating the probability distribution function (PDF) of remaining useful life based on the results of Monte-Carlo simulation of the ARMA models. This step was performed for different percentages of the degradation signal of each bearing. The accuracy of the proposed approach then was assessed by comparing the actual life of the bearing and the estimated life of the bearing from the developed models. The results were impressive and indicated that the accuracy of the models improved as more data was utilized in developing the ARMA models (we get closer to the end of the life of the bearing).

17 WIND ENERGY↗

A semiparametric latent factor model for large scale temporal data with heteroscedasticity

Large scale temporal data have flourished in a vast array of applications, and their sophisticated structures, especially the heteroscedasticity among subjects with inter- and intra-temporal dependence, have fueled a great demand for new statistical models. In this paper, with covariate information, we consider a flexible model for large scale temporal data with subject-specific heteroscedasticity. Formally, the model employs latent semiparametric factors to simultaneously account for the subject-specific heteroscedasticity and the contemporaneous and/or serial correlations. The subject-specific heteroscedasticity is modeled as the product of the unobserved factor process and subject’s covariate effect, which is further characterized via additive models. For estimation, we propose a two-step procedure. First, the latent factor process and nonparametric loading are recovered through projection-based methods, and following, we estimate the regression components by approaches motivated from the generalized least squares. By scrupulously examining the non-asymptotic rates for recovering the factor process and its loading, we show the consistency and efficiency of estimated regression coefficients in the absence of prior knowledge of latent factor process and subject’s covariate effect. Here, the statistical guarantees remain valid even for finite time points that makes our method particularly appealing when the subjects significantly outnumber the observation time points. Using comprehensive simulations, we demonstrate the finite sample performance of our method, which corroborates the theoretical findings. Finally, we apply our method to a data set of air quality and energy consumption collected at 129 monitoring sites in the United States in 2015.

97 MATHEMATICS AND COMPUTING↗

Discovering the Unknowns: A First Step

This article aims at discovering the unknown variables in the system through data analysis. The main idea is to use the time of data collection as a surrogate variable and try to identify the unknown variables by modeling gradual and sudden changes in the data. We use Gaussian process modeling and a sparse representation of the sudden changes to efficiently estimate the large number of parameters in the proposed statistical model. The method is tested on a realistic dataset generated using a one-dimensional implementation of a Magnetized Liner Inertial Fusion (MagLIF) simulation model, and encouraging results are obtained.

42 ENGINEERING↗

Automation Technologies Impact on the Work Process of Nuclear Power Plants

The current cost associated with the work process of nuclear power plants necessities modernizing the work process by augmenting it with automation technologies. This work was performed to assess various automation technologies and the means by which they assimilate into the work process in order to make gains in cost savings in modern nuclear power plants. The goal was to identify key informational items that would be useful to members of industry who are undertaking the large effort to reduce costs through automation by identifying technology maturity levels, recent research, and an analysis of cost impacts of the work process. The technologies cost saving was categorized into low, medium, and high cost savings. Through this effort, a substantive literature review and analysis of recent technological and market trends was performed. The key areas of cost impact were identified through communication with users in industry from operations and maintenance organizations. The results were assembled into a list of work process steps and technologies that are ready be implemented or researched for the automating aspects of that step. This effort aims to present to utilities opportunities of cost saving that are achievable in the short term, and gaps for research organizations and vendors to consider for further research and development. The results of this effort generated a list of technologies that fit each of the three cost saving categories. Electronic work packages remain a high cost saving technology, but data mining and integration, smart scheduling, and dynamic risk models are also indicated to yield a high cost savings. Video applications, spatial mapping, and image processing and identification technologies appear to provide solid cost savings in the medium category, and rounding out the low cost saving areas are deployable technologies such as bar codes, communication tools, and electronic tags.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimentally-Derived Bidirectional Reflectance Distribution Function Data in Support of the Orbital Debris Program Office

The NASA Orbital Debris Program Office (ODPO) has used various optical assets to acquire photometric data of Earth-orbiting objects to define the orbital debris environment. To better characterize and model optical data acquired from ground-based telescopes, the Optical Measurements Center (OMC) at NASA Johnson Space Center emulates illumination conditions seen in space by using equipment and techniques that parallel telescopic observations and source-target-sensor orientations. One of the OMC goals is to improve the size calculation used for optical data by developing an optical-based Size Estimation Model. The current size estimation requires applying a Lambertian phase function, a set albedo value, and range to the observed magnitude. The first step to improving the sampled brightness of laboratory targets is to remove aspect-angle dependencies. Then, the volume of possible object viewing angles is sampled at 21 combinations of azimuth and zenith angles for each solar phase angle. Finally, the acquired images are input into an image processing program that generates approximations for the object’s Bidirectional Reflectance Distribution Function (BRDF) and phase function. The BRDF is a radiometric concept that identifies an object’s material composition by matching a BRDF approximated with photometric data collected by ground-based telescopes with a BRDF generated experimentally from a known object in the laboratory. This paper discusses the validation of experimental BRDF and phase function approximations produced in the OMC and how the findings will be incorporated into ODPO models. A Lambertian sphere is imaged and the subsequent experimental functions are scrutinized to confirm that they correspond to an object that has an isotropic luminance. With the image processing algorithm validated, test objects with varying optical properties are then imaged to confirm that the produced photometric functions are both unique and repeatable. Once the validation is complete, the OMC will be used to evaluate a subset of fragments from a hypervelocity impact test of a mock-up satellite and assess the appropriate phase function and size estimates using BRDF measurements for a large volume of targets composed of various shapes, sizes, and materials.

Orbital Debris Program Office (ODPO)↗

Experimentally-Derived Phase Function Approximations in Support of the Orbital Debris Program Office

The NASA Orbital Debris Program Office (ODPO) has used various optical assets to acquire photometric data of Earth-orbiting objects to define the orbital debris environment. To better characterize and model optical data acquired from ground-based telescopes, the Optical Measurements Center (OMC) at NASA Johnson Space Center emulates illumination conditions seen in space by using equipment and techniques that parallel telescopic observations and source-target-sensor orientations. One of the OMC goals is to improve the size calculation used for optical data by developing an optical-based Size Estimation Model. The current size estimation requires applying a Lambertian phase function, a set albedo value, and range to the observed magnitude. The first step to improving the sampled brightness of laboratory targets is to remove aspect-angle dependencies. Then, the volume of possible object viewing angles is sampled at 21 combinations of azimuth and elevation angles for each solar phase angle. Finally, the acquired images are input into an image processing program that generates approximations for the object’s Bidirectional Reflectance Distribution Function (BRDF) and phase function. The BRDF is a radiometric concept that identifies an object’s material composition by matching a BRDF approximated with photometric data collected by ground-based telescopes with a BRDF generated experimentally from a known object in the laboratory. This paper presents the initial BRDF and phase function approximations for various fragments/targets acquired in the OMC and how the findings will be incorporated into ODPO models. A Lambertian sphere is used as a baseline for initial size estimation calculations and phase function comparisons. Spacecraft materials and fragments from hypervelocity laboratory impact tests are also presented to compare against the current assumed Lambertian phase function used for size estimates. This paper presents the preliminary phase function analysis and plan forward to utilize a laboratory-based phase function to improve the current optical size estimates using BRDF measurements for a large volume of targets composed of various shapes, sizes, and materials.

Hostetler, J.↗

Architecture and data processing alternatives for the tse computer. Volume 4: Image rotation using tse operations

The tse computer's capability of achieving image congruence between temporal and multiple images with misregistration due to rotational differences is reported. The coordinate transformations are obtained and a general algorithms is devised to perform image rotation using tse operations very efficiently. The details of this algorithm as well as its theoretical implications are presented. Step by step procedures of image registration are described in detail. Numerous examples are also employed to demonstrate the correctness and the effectiveness of the algorithms and conclusions and recommendations are made.

Kao, M. H.↗

Fine- and hyperfine-structure effects in molecular photoionization. II. Resonance-enhanced multiphoton ionization and hyperfine-selective generation of molecular cations

Resonance-enhanced multiphoton ionization (REMPI) is a widely used technique for studying molecular photoionization and producing molecular cations for spectroscopy and dynamics studies. Here, we present a model for describing hyperfine-structure effects in the REMPI process and for predicting hyperfine populations in molecular ions produced by this method. This model is a generalization of our model for fine- and hyperfine-structure effects in one-photon ionization of molecules presented in Paper I [M. Germann and S. Willitsch, J. Chem. Phys. 145, 044314 (2016)]. This generalization is achieved by covering two main aspects: (1) treatment of the neutral bound-bound transition including the hyperfine structure that makes up the first step of the REMPI process and (2) modification of our ionization model to account for anisotropic populations resulting from this first excitation step. Our findings may be used for analyzing results from experiments with molecular ions produced by REMPI and may serve as a theoretical background for hyperfine-selective ionization experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Block-Based Triangle Counting Algorithm on Heterogeneous Environments

Triangle counting is a fundamental building block in graph algorithms. In this article, we propose a block-based triangle counting algorithm to reduce data movement during both sequential and parallel execution. Our block-based formulation makes the algorithm naturally suitable for heterogeneous architectures. The problem of partitioning the adjacency matrix of a graph is well-studied. Our task decomposition goes one step further: it partitions the set of triangles in the graph. By streaming these small tasks to compute resources, we can solve problems that do not fit on a device. We demonstrate the effectiveness of our approach by providing an implementation on a compute node with multiple sockets, cores and GPUs. The current state-of-the-art in triangle enumeration processes the Friendster graph in 2.1 seconds, not including data copy time between CPU and GPU. Using that metric, our approach is 20 percent faster. When copy times are included, our algorithm takes 3.2 seconds. This is 5.6 times faster than the fastest published CPU-only time.

97 MATHEMATICS AND COMPUTING↗