Search NASA⌕ Search

SEARCH · Search NASA

Results for “data smoothing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Heat transfer during condensation of HFC-134a and R-404A inside of a horizontal smooth and micro-fin tube

In recent small and medium capacity refrigeration systems, the condenser tubes are provided with micro-fins from inside. The vapour refrigerant at the compressor outlet and the condenser inlet is in superheat state. As it advances in the condenser it is in two phases and at the outlet it is in sub cooled liquid. The heat transfer coefficient (HTC) during condensation of HFC-134a and R-404A in a smooth (8.56 mm ID) and micro-fin tubes (8.96 mm ID) are experimentally investigated. Different from previous studies, the present experiments are performed for various condensing temperatures, with superheating and sub cooling and using hermetically sealed compressor. The test runs are done at average saturated condensing temperatures ranging from 35 C to 60 C. The mass fluxes are between 90 and 800 kg m{sup -2} s{sup -1}. The experimental results indicate that the average HTC increases with mass flux but decreases with increasing condensing temperature for both smooth and micro-fin tubes. The average condensation HTCs of HFC-134a and R-404A for the micro-fin tubes were 1.5-2.5 and 1.3-2 times larger than that in smooth tube respectively. The HTCs for R-404A are less than that of HFC-134a. New correlations based on the data gathered during the experimentation for predicting condensation HTCs are proposed for wide range of operating conditions. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Planck intermediate results. XII: Diffuse Galactic components in the Gould Belt system

We perform here an analysis of the diffuse low-frequency Galactic components in the southern part of the Gould Belt system (130° ≤ l ≤ 230° and -50° ≤ b ≤ -10°). Strong ultra-violet flux coming from the Gould Belt super-association is responsible for bright diffuse foregrounds that we observe from our position inside the system and that can help us improve our knowledge of the Galactic emission. Free-free emission and anomalous microwave emission (AME) are the dominant components at low frequencies (ν < 40 GHz), while synchrotron emission is very smooth and faint. We separated diffuse free-free emission and AME from synchrotron emission and thermal dust emission by using Planck data, complemented by ancillary data, using the correlated component analysis (CCA) component-separation method and we compared our results with the results of cross-correlation of foreground templates with the frequency maps. We estimated the electron temperature T e from Hα and free-free emission using two methods (temperature-temperature plot and cross-correlation) and obtained T e ranging from 3100 to 5200K for an effective fraction of absorbing dust along the line of sight of 30% (f d = 0.3). We estimated the frequency spectrum of the diffuse AME and recovered a peak frequency (in flux density units) of 25.5 ± 1.5 GHz. We verified the reliability of this result with realistic simulations that include biases in the spectral model for the AME and in the free-free template. By combining physical models for vibrational and rotational dust emission and adding the constraints from the thermal dust spectrum from Planck and IRAS, we are able to present a good description of the AME frequency spectrum for plausible values of the local density and radiation field.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploring the statistics of magnetic reconnection X-points in kinetic particle-in-cell turbulence

Magnetic reconnection is a ubiquitous phenomenon in turbulent plasmas. It is an important part of the turbulent dynamics and heating of space and astrophysical plasmas. We examine the statistics of magnetic reconnection using a quantitative local analysis of the magnetic vector potential, previously used in magnetohydrodynamics simulations, and now employed to fully kinetic particle-in-cell (PIC) simulations. Different ways of reducing the particle noise for analysis purposes, including multiple smoothing techniques, are explored. We find that a Fourier filter applied at the Debye scale is an optimal choice for analyzing PIC data. Lastly, we find a broader distribution of normalized reconnection rates compared to the MHD limit with rates as large as 0.5 but with an average of approximately 0.1.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytic solutions for Asay foil trajectories with implications for ejecta source models and mass measurements

We consider the trajectory of an Asay foil ejecta diagnostic for scenarios where ejecta are produced at a singly shocked planar surface and fly ballistically through a perfect vacuum to the sensor. We do so by building upon a previously established mathematical framework derived for the analytic study of stationary sensors. First, we derive the momentum conservation equation for the problem, in a form amenable to accelerating sensors, in terms of a generic ejecta source model. The result is an integrodifferential equation of motion for the foil trajectory. This equation yields an easily calculable closed-form implicit solution for the foil trajectory in instant-production scenarios. From there, we derive a boundary condition that particle velocity distributions must satisfy if their associated foil trajectories are to exhibit a smooth initial acceleration, as occurs in some experiments. This condition is identical to one derived previously from a consideration of piezoelectric voltage data obtained in similar experiments. We also compare techniques for inferring accumulated ejecta masses from foil trajectories, first by deriving the exact solution, and then by quantifying the error imposed by a frequently used approximate solution (both subject to the assumption of instantaneous ejecta production). Finally, we examine the common practice of presenting inferred cumulative ejecta masses as a function of implied ejecta velocity, establishing the conditions under which this methodology is most meaningful.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DUST DISTRIBUTION IN THE beta PICTORIS CIRCUMSTELLAR DISKS

We present three-dimensional models of dust distribution around beta Pictoris that produce the best fits to the Hubble Space Telescope/Advanced Camera for Surveys' images obtained by Golimowski and coworkers. We allow for the presence of either one or two separate axisymmetric dust disks. The density models are analytical, radial two power laws joined smoothly at a crossover radius with density exponentially decreasing away from the midplane of the disks. Two-disk models match the data best, yielding a reduced chi{sup 2} of approx1.2. Our two-disk model reproduces many of the asymmetries reported in the literature and suggests that it is the secondary (tilted) disk which is largely responsible for them. Our model suggests that the secondary disk is not constrained to the inner regions of the system (extending out to at least 250 AU) and that it has a slightly larger total area of dust than the primary, as a result of slower falloff of density with radius and height. This surprising result raises many questions about the origin and dynamics of such a pair of disks. The disks overlap, but can coexist owing to their low optical depths and therefore long mean collision times. We find that the two disks have dust replenishment times on the order of 10{sup 4} yr at approx100 AU, hinting at the presence of planetesimals that are responsible for the production of second generation dust. A plausible conjecture, which needs to be confirmed by physical modeling of the collisional dynamics of bodies in the disks, is that the two observed disks are derived from underlying planetesimal disks; such disks would be anchored by the gravitational influence of planets located at less than 70 AU from beta Pic that are themselves in slightly inclined orbits.

79 ASTRONOMY AND ASTROPHYSICS↗

Source term method for binary neutron stars initial data

The initial condition problem for a binary neutron star system requires a Poisson equation solver for the velocity potential with a Neumann-like boundary condition on the surface of the star. Difficulties that arise in this boundary value problem are: (a) the boundary is not known a priori, but constitutes part of the solution of the problem; (b) various terms become singular at the boundary. In this work, we present a new method to solve the fluid Poisson equation for irrotational/spinning binary neutron stars. The advantage of the new method is that it does not require complex fluid surface fitted coordinates and it can be implemented in a Cartesian grid, which is a standard choice in numerical relativity calculations. This is accomplished by employing the source term method proposed by Towers, where the boundary condition is treated as a jump condition and is incorporated as additional source terms in the Poisson equation, which is then solved iteratively. The issue of singular terms caused by vanishing density on the surface is resolved with an additional separation that shifts the computation boundary to the interior of the star. We present two-dimensional tests to show the convergence of the source term method, and we further apply this solver to a realistic three-dimensional binary neutron star problem. By comparing our solution with the one coming from the initial data solver cocal, we demonstrate agreement to approximately 1%. We report our method can be used in other problems with non-smooth solutions like in magnetized neutron stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Cross-correlating radial peculiar velocities and CMB lensing convergence

We study, for the first time, the cross correlation between the angular distribution of radial peculiar velocities (PV) and the lensing convergence of cosmic microwave background (CMB) photons. We derive theoretical expectations for the signal and its covariance and assess its detectability with existing and forthcoming surveys. We find that such cross-correlations are expected to improve constraints on different gravitational models by partially breaking degeneracies with the matter density. We identify in the distance-scaling dispersion of the peculiar velocities the most relevant source of noise in the cross correlation. For this reason, we also study how the above picture changes assuming a redshift-independent scatter for the PV, obtained for example using a reconstruction technique. Our results show that the cross correlation might be detected in the near future combining PV measurements from DESI and the convergence map from CMB-S4. Using realistic direct PV measurements we predict a cumulative signal-to-noise ratio of approximately 3.8σ using data on angular scales 3 ≤ ℓ ≤ 200. For an idealized reconstructed peculiar velocity map extending up to redshift z = 0.15 and a smoothing scale of 4 Mpc h -1 we predict a cumulative signal-to-noise ratio of approximately 27σ from angular scales 3 ≤ ℓ ≤ 200. We conclude that currently reconstructed peculiar velocities have more constraining power than directly observed ones, even though they are more cosmological-model dependent.

79 ASTRONOMY AND ASTROPHYSICS↗

Studying the Dependence of the Aerodynamic Characteristics of Rotating Cylinders on the Rake Angle of Air Flow

The results of experimental studies on estimating the lift force and lift coefficient of a rotating cylinder of constant cross section are presented. The data on the effect of the flow rake angle on the aerodynamic characteristics of rotating cylinders within a range of angles from 0° to 90° are analyzed. It has been established that a decrease in the lift coefficient is observed at flow rake angles above 30°, so the wind engine element shows a positive result within a range of rake angles from–30 ° ≤ α ≤ 30°. The data of these experimental studies can be used for the development of wind engines with blades designed as rotating cylinders with a smooth surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TEMPORAL VARIABILITY FROM THE TWO-COMPONENT ADVECTIVE FLOW SOLUTION AND ITS OBSERVATIONAL EVIDENCE

In the propagating oscillatory shock model, the oscillation of the post-shock region, i.e., the Compton cloud, causes the observed low-frequency quasi-periodic oscillations (QPOs). The evolution of QPO frequency is explained by the systematic variation of the Compton cloud size, i.e., the steady radial movement of the shock front, which is triggered by the cooling of the post-shock region. Thus, analysis of the energy-dependent temporal properties in different variability timescales can diagnose the dynamics and geometry of accretion flows around black holes. We study these properties for the high-inclination black hole source XTE J1550-564 during its 1998 outburst and the low-inclination black hole source GX 339-4 during its 2006–07 outburst using RXTE /PCA data, and we find that they can satisfactorily explain the time lags associated with the QPOs from these systems. We find a smooth decrease of the time lag as a function of time in the rising phase of both sources. In the declining phase, the time lag increases with time. We find a systematic evolution of QPO frequency and hard lags in these outbursts. In XTE J1550-564, the lag changes from hard to soft (i.e., from a positive to a negative value) at a crossing frequency (ν {sub c}) of ∼3.4 Hz. We present possible mechanisms to explain the lag behavior of high and low-inclination sources within the framework of a single two-component advective flow model.

79 ASTRONOMY AND ASTROPHYSICS↗

Kiloparsec-scale dust disks in high-redshift luminous submillimeter galaxies

We present high-resolution (0.″16) 870 μm Atacama Large Millimeter/submillimeter Array (ALMA) imaging of 16 luminous (L{sub IR}∼4×10{sup 12} L{sub ⊙}) submillimeter galaxies (SMGs) from the ALESS survey of the Extended Chandra Deep Field South. This dust imaging traces the dust-obscured star formation in these z∼2.5 galaxies on ∼1.3 kpc scales. The emission has a median effective radius of R {sub e} = 0.″24 ± 0.″02, corresponding to a typical physical size of R{sub e}= 1.8 ± 0.2 kpc. We derive a median Sérsic index of n = 0.9 ± 0.2, implying that the dust emission is remarkably disk-like at the current resolution and sensitivity. We use different weighting schemes with the visibilities to search for clumps on 0.″12 (∼1.0 kpc) scales, but we find no significant evidence for clumping in the majority of cases. Indeed, we demonstrate using simulations that the observed morphologies are generally consistent with smooth exponential disks, suggesting that caution should be exercised when identifying candidate clumps in even moderate signal-to-noise ratio interferometric data. We compare our maps to comparable-resolution Hubble Space Telescope H{sub 160}-band images, finding that the stellar morphologies appear significantly more extended and disturbed, and suggesting that major mergers may be responsible for driving the formation of the compact dust disks we observe. The stark contrast between the obscured and unobscured morphologies may also have implications for SED fitting routines that assume the dust is co-located with the optical/near-IR continuum emission. Finally, we discuss the potential of the current bursts of star formation to transform the observed galaxy sizes and light profiles, showing that the z∼0 descendants of these SMGs are expected to have stellar masses, effective radii, and gas surface densities consistent with the most compact massive (M{sub ∗} ∼ 1–2 × 10{sup 11} M{sub ⊙}) early-type galaxies observed locally.

79 ASTRONOMY AND ASTROPHYSICS↗

Prediction of airframe noise

Methods of predicting airframe noise generated by aircraft in flight under nonpowered conditions are discussed. Approaches to predictions relying on flyover data and component theoretical analyses are developed. A nondimensional airframe noise spectrum of various aircraft is presented. The spectrum was obtained by smoothing all the measured spectra to remove any peculiarities due to airframe protrusions, normalizing each spectra by its overall sound pressure level and a characteristics frequency, and averaging the spectra together. A chart of airframe noise sources is included.

Hardin, J. C.↗

Determination of polar motion and earth rotation from laser tracking of satellites

Laser tracking of the Lageos spacecraft has been used to derive the position of the earth's pole of rotation at intervals during October, November and December 1976. The estimated precision of the results is 0.01 to 0.02 arcseconds in both x and y components, although the formal uncertainty is an order of magnitude better, and there is general agreement with the Bureau International de l'Heure smoothed pole path to about 0.02 arcseconds. Present orbit determination capability of Lageos is limited to about 25 cm rms fit to data over periods of 5 days and about 50 cm over 50 days. The present major sources of error in the perturbations of Lageos are earth and ocean tides followed by the earth's gravity field, and solar and earth reflected radiation pressure. Ultimate accuracy for polar motion and earth rotation from Lageos after improved modeling of the perturbing forces appears to be of order + or - 5 cm for polar motion over a period of about one day and about + or - 0.2 to + or - 0.3 milliseconds in UT for periods up to 2 or 3 months.

Smith, D. E.↗

Alternative methods to smooth the Earth's gravity field

Convolutions on the sphere with corresponding convolution theorems are developed for one and two dimensional functions. Some of these results are used in a study of isotropic smoothing operators or filters. Well known filters in Fourier spectral analysis, such as the rectangular, Gaussian, and Hanning filters, are adapted for data on a sphere. The low-pass filter most often used on gravity data is the rectangular (or Pellinen) filter. However, its spectrum has relatively large sidelobes; and therefore, this filter passes a considerable part of the upper end of the gravity spectrum. The spherical adaptations of the Gaussian and Hanning filters are more efficient in suppressing the high-frequency components of the gravity field since their frequency response functions are strongly field since their frequency response functions are strongly tapered at the high frequencies with no, or small, sidelobes. Formulas are given for practical implementation of these new filters.

Jekeli, C.↗

Radar measurement of small-scale surface texture - Syrtis Major

Available data on Syrtis Major is examined and compared in light of lunar experience in order to infer the small-scale structure and study the problem of origin and present state. The radar data are reviewed, introducing three previously unpublished sets of observations obtained during the 1978 Mars opposition. Syrtis Major is shown to be smooth and relatively homogeneous when sensed at centimeter wavelengths, root mean square surface slopes ranging from more than 1.5-2.0 deg in the east to less than 0.5 deg along the western margin at wavelength 12.6 cm. Radar reflectivity increases from about 5% to about 12% across Syrtis Major, being greatest near the western margin. A self-consistent model for the surface of Syrtis Major is arrived at which includes structure on all scales. It is shown that the moon is not a good radar analog for Syrtis Major.

Simpson, R. A.↗

The evolution of the radio emission from Kepler's Supernova remnant

High-resolution radio maps of Kepler's Supernova remnant (SNR) using all four arrays of the VLA have been obtained at wavelengths of 20 and 6 cm. They show the complete structure of the remnant; all features are resolved with sizes greater than about 2 arcsec, and the relative brightness of the smooth component near the center is about 1/4 the brightness of the rim. The results have been compared with earlier more limited data to measure changes in the remnant over a four-year time span. The SNR is expanding with a mean rate of R proportional to t exp 0.50 with considerable variations around the shell. Values range from R proportional to t exp 0.35 on the bright northern rim to R proportional to t exp 0.65 on the eastern part of the shell. The measurements are consistent with expansion into a variable circumstellar medium.

Dickel, John R.↗

Airfoil self-noise and prediction

A prediction method is developed for the self-generated noise of an airfoil blade encountering smooth flow. The prediction methods for the individual self-noise mechanisms are semiempirical and are based on previous theoretical studies and data obtained from tests of two- and three-dimensional airfoil blade sections. The self-noise mechanisms are due to specific boundary-layer phenomena, that is, the boundary-layer turbulence passing the trailing edge, separated-boundary-layer and stalled flow over an airfoil, vortex shedding due to laminar boundary layer instabilities, vortex shedding from blunt trailing edges, and the turbulent vortex flow existing near the tip of lifting blades. The predictions are compared successfully with published data from three self-noise studies of different airfoil shapes. An application of the prediction method is reported for a large scale-model helicopter rotor, and the predictions compared well with experimental broadband noise measurements. A computer code of the method is given.

Brooks, Thomas F.↗

Comparative mapping of Pluto's sub-Charon hemisphere - Three least squares models based on mutual event lightcurves

Observations of Charon transits are used here to derive preliminary maps of Pluto's sub-Charon hemisphere. Three models are used to describe the brightness of Pluto's surface as functions of latitude and longitude. Mapping results are presented using spherical harmonic functions, polynomial functions, and finite elements. A smoothing algorithm applied to the maps is described and the validity and resolution of the maps is tested by reconstruction from synthetic data. A preliminary finding from the maps is that the south polar region has the highest albedo of any location on the planet.

Young, Eliot F.↗