Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Polar asymmetry of La{sub (1−δ)}Al{sub (1+δ)}O{sub 3}/SrTiO{sub 3} heterostructures probed by optical second harmonic generation

By combining transport measurements and optical second harmonic generation, we have investigated heterostructures formed between crystalline thin films of LaAlO{sub 3}, with varying stoichiometry and TiO{sub 2}-terminated SrTiO{sub 3}(001) substrates. Optical second harmonic generation directly probes the polarity of these heterostructures, thus complementing the transport data. The stoichiometry and the growth temperature are found to be critical parameters for controlling both the interfacial conductivity and the heterostructure polarity. In agreement with the previous work, all of the samples display an insulator-to-metal transition in the Al-reach region, with the conductivity first increasing and then saturating at the highest Al/La ratios. The second harmonic signal also increases as a function of the Al/La ratio, but, at the highest growth temperature, it does not saturate. This unusual behavior is consistent with the formation of an ordered structure of defect dipoles in the LaAlO{sub 3} film caused by the off-centering of excess Al atoms in agreement with the theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-temperature dynamics of ferroelectric domains in PbZr{sub 0.3}Ti{sub 0.7}O{sub 3} epitaxial thin films studied by piezoresponse force microscopy

Dynamics of domain boundaries is expected to change drastically at low absolute temperatures but direct experimental information for this temperature range is still lacking. To clarify the mechanism of low-temperature domain dynamics, we studied the growth of ferroelectric domains in the temperature range 4.2–295 K using the out-of-plane piezoresponse mode of a cryogenic atomic force microscope (AFM). Nanoscale 180° domains were created in epitaxial PbZr{sub 0.3}Ti{sub 0.7}O{sub 3} films by applying short voltage pulses between the conductive AFM tip brought into contact with the bare film surface and the bottom LaSr{sub 0.7}Mn{sub 0.3}O{sub 3} electrode. A quantitative analysis of acquired piezoresponse images enabled us to determine the in-plane domain size as a function of the writing voltage and pulse duration. It is found that at all studied temperatures the dependence of this size on the pulse duration can be fitted by a logarithmic function, which indicates that the domain-wall velocity exponentially depends on the driving electric field. The theoretical analysis of experimental data shows that the observed low-temperature domain dynamics is consistent with the creep of domain boundaries occurring in the presence of defects and structural nanoheterogeneities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth, structural, optical, thermal and laser damage threshold studies of an organic single crystal: 1,3,5 – triphenylbenzene (TPB)

Good quality single crystals of pure hydrocarbon 1,3,5-Triphenylbenzene (TPB) have been successfully grown using toluene as a solvent using controlled slow cooling solution growth technique. TPB crystallizes in orthorhombic structure with the space group Pna2{sub 1}. The structural perfection of the grown crystal has been analysed by high resolution X-ray diffraction measurements. The range and percentage of the optical transmission are ascertained by recording the UV-vis spectrum. Thermo gravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study its thermal properties. Powder second harmonic generation studies were carried out to explore its NLO properties. Laser damage threshold value has been determined using Nd:YAG laser operating at 1064 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical power limiting in ensembles of colloidal Ag{sub 2}S quantum dots

The effect of power limiting for optical radiation at a wavelength of 660 nm with a pulse duration of 10 ms and operation threshold of 2.2 – 3.1 mJ cm{sup -2} is observed in ensembles of colloidal Ag{sub 2}S quantum dots (QDs). Using the z-scanning method in an open-aperture scheme it is found that the power is limited mainly due to reverse saturable absorption caused by two-photon optical transitions that involve energy levels of Ag{sub 2}S photoluminescence centres, related to structural impurity defects in colloidal Ag{sub 2}S QDs. At the same time, the z-scanning in a closed-aperture scheme demonstrates the formation of a thermal dynamic lens. (nonlinear optical phenomena)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Calculation of frequency-dependent coercive field based on the investigation of intrinsic switching kinetics of strained Pb(Zr{sub 0.2}Ti{sub 0.8})O{sub 3} thin films.

We report a method to predict the frequency dependence of coercive fields in ferroelectric films. The deduction of this method as well as the analysis are based on investigations of intrinsic switching kinetics of high-quality, single-crystal-like, epitaxial Pb(Zr{sub 0.2}Ti{sub 0.8})O{sub 3} thin films with extended defect-free structures. The newly suggested relationship, i.e. an exponential decrease in frequency with the reciprocal of the coercive field, differs from the empirical power-law relationship. The proposed equation relates the coercive field (E{sub c}) measured using ferroelectric hysteresis loops to the activation fields determined from pulse width switching measurements, which provides a way to understand the behaviour of E{sub c} as a function of frequency from the switching kinetics point of view.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron beam analysis induces Cl vacancy defects in a NaCl thin film

This work reports on the electron-induced modification of NaCl thin film grown on Ag(110). We show using low energy electron diffraction that electron beam bombardment leads to desorption and formation of Cl vacancy defects on NaCl surface. The topographic structure of these defects is studied using scanning tunneling microscopy (STM) showing the Cl defects as depressions on the NaCl surface. Most of the observed defects are mono-atomic vacancies and are located on flat NaCl terraces. Auger electron spectroscopy confirms the effect of electron exposure on NaCl thin films showing Cl atoms desorption from the surface. Using density functional theory taken into account the van der Waals dispersion interactions, we confirm the observed experimental STM measurements with STM simulation. Furthermore, comparing the adsorption of defect free NaCl and defective NaCl monolayer on Ag(110) surfaces, we found an increase of the adhesion energy and the charge transfer between the NaCl film and the substrate due to the Cl vacancy. In details, the adhesion energy increases between the NaCl film and the metallic Ag substrate from 30.4 meV Å –2 for the NaCl film without Cl vacancy and from 39.5 meV Å –2 for NaCl film with a single Cl vacancy. The charge transfer from the NaCl film to the Ag substrate is enhanced when the vacancy is created, from 0.63e – to 1.25e – .

Materials Science↗

Ensembles of novelty detection classifiers for structural health monitoring using guided waves

Guided wave structural health monitoring uses sparse sensor networks embedded in sophisticated structures for defect detection and characterization. The biggest challenge of those sensor networks is developing robust techniques for reliable damage detection under changing environmental and operating conditions. To address this challenge, we develop a novelty classifier for damage detection based on one class support vector machines. We identify appropriate features for damage detection and introduce a feature aggregation method which quadratically increases the number of available training observations.We adopt a two-level voting scheme by using an ensemble of classifiers and predictions. Each classifier is trained on a different segment of the guided wave signal, and each classifier makes an ensemble of predictions based on a single observation. Using this approach, the classifier can be trained using a small number of baseline signals. We study the performance using monte-carlo simulations of an analytical model and data from impact damage experiments on a glass fiber composite plate.We also demonstrate the classifier performance using two types of baseline signals: fixed and rolling baseline training set. The former requires prior knowledge of baseline signals from all environmental and operating conditions, while the latter does not and leverages the fact that environmental and operating conditions vary slowly over time and can be modeled as a Gaussian process.

Dib, Gerges (ORCID:0000000255004047)↗

Structural and biochemical characterization of MepR, a multidrug binding transcription regulator of the Staphylococcus aureus multidrug efflux pump MepA

MepR is a multidrug binding transcription regulator that represses expression of the Staphylococcus aureus multidrug efflux pump gene, mepA, as well as its own gene. MepR is induced by multiple cationic toxins, which are also substrates of MepA. In order to understand the gene regulatory and drug-binding mechanisms of MepR, we carried out biochemical, in vivo and structural studies. The 2.40 A' resolution structure of drug-free MepR reveals the most open MarR family protein conformation to date, which will require a huge conformational change to bind cognate DNA. DNA-binding data show that MepR uses a dual regulatory binding mode as the repressor binds the mepA operator as a dimer of dimers, but binds the mepR operator as a single dimer. Alignment of the six half sites reveals the consensus MepR binding site, 5’-GTTAGAT-3’. ‘Drug’ binding studies show that MepR binds to ethidium and DAPI with comparable affinities (K d = 2.6 and 4.5 μM, respectively), but with significantly lower affinity to the larger rhodamine 6G (K d = 62.6 μM). Mapping clinically relevant or in vitro selected MepR mutants onto the MepR structure suggests that their defective repressor phenotypes are due to structural and allosteric defects.

59 BASIC BIOLOGICAL SCIENCES↗

Sampling Polymorphs of Ionic Solids using Random Superlattices

Polymorphism offers rich and virtually unexplored space for discovering novel functional materials. To harness this potential approaches capable of both exploring the space of polymorphs and assessing their realizability are needed. Here, one such approach devised for partially ionic solids is presented. The structure prediction part is carried out by performing local density functional theory relaxations on a large set of random supperlattices (RSLs) with atoms distributed randomly over different planes in a way that favors cation-anion coordination. Applying the RSL sampling on MgO, ZnO, and SnO 2 reveals that the resulting probability of occurrence of a given structure offers a measure of its realizability explaining fully the experimentally observed, metastable polymorphs in these three systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface termination effect of $\mathrm{SrTiO_3}$ substrate on ultrathin $\mathrm{SrRuO_3}$

A uniform 1-unit-cell-high step on the SrTiO 3 (STO) substrate is a prerequisite for growing high-quality epitaxial oxide heterostructures. However, it is inevitable that defects induced by mixed substrate-surface termination exist at the interface, significantly impacting the properties of ultrathin films. Here we microscopically identify the origin for the lateral inhomogeneity in the growth of ultrathin SrRuO3 films due to the step effects of SrTiO 3 (001). By using atomic-resolved scanning transmission electron microscopy, we observe two distinct types of step propagation along the [011] and [$0\bar{1}1$] crystallographic direction in SrTiO 3 -SrRuO 3 heterostructures, respectively. In particular, the type-II [$0\bar{1}1$] step results in lateral discontinuity of monolayer SrRuO 3 and originates from the SrO-terminated regions along the TiO 2 -terminated step edge. Such an induced lateral discontinuity should be responsible for the distinct electronic and magnetic properties of monolayer SrRuO 3 . Our findings underscore the critical importance of using single-termination STO substrate to achieve high-quality termination-selective films and to unveil the intrinsic properties of epitaxial films in the atomic limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From breaking rules to making rules in materials science

This editorial is a perspective article discussing the broader philosophy of synthesis science, emphasizing how techniques such as MBE allow researchers to manipulate bonding, structure, and defects beyond equilibrium thermodynamics, enabling the design of new materials and emergent properties through controlled growth and epitaxial engineering.

Jalan, Bharat [Univ. of Minnesota, Minneapolis, MN↗

Interaction of copper impurity with radiation defects in silicon doped with boron

The spectrum of deep levels formed in boron-doped Czochralski-grown silicon single crystals as a result of interaction of radiation defects with copper impurity is studied. It is shown that, irrespective of the order of introduction of defects (both in the case of low-temperature copper diffusion into crystals preliminarily irradiated with electrons and in the case of irradiation of the samples contaminated with copper), the same set of deep levels appears. In addition to conventional radiation defects, three types of levels have been detected in the band gap of copper-containing crystals. These levels include the level E{sub v} + 0.49 eV (already mentioned in available publications), the level E{sub v} + 0.51 eV (previously not related to copper), and a level close to the donor level of a vacancy. Based on the analysis of concentration profiles, the interstitial carbonoxygen pair is excluded from possible precursors of the copper-containing center with level E{sub v} + 0.49 eV.

36 MATERIALS SCIENCE↗

Radiation-stimulated processes in transistor temperature sensors

The features of the radiation-stimulated changes in the I–V and C–V characteristics of the emitter–base junction in KT3117 transistors are considered. It is shown that an increase in the current through the emitter junction is observed at the initial stage of irradiation (at doses of D < 4000 Gy for the “passive” irradiation mode and D < 5200 Gy for the “active” mode), which is caused by the effect of radiation-stimulated ordering of the defect-containing structure of the p–n junction. It is also shown that the X-ray irradiation (D < 14000 Gy), the subsequent relaxation (96 h), and thermal annealing (2 h at 400 K) of the transistor temperature sensors under investigation result in an increase in their radiation resistance.

36 MATERIALS SCIENCE↗

ZnO and MgZnO Nanocrystalline Flexible Films: Optical and Material Properties

An emerging material for flexible UV applications is Mg x Zn 1 − x O which is capable of tunable bandgap and luminescence in the UV range of ~3.4 eV–7.4 eV depending on the composition x . Studies on the optical and material characteristics of ZnO and Mg 0.3 Zn 0.7 O nanocrystalline flexible films are presented. The analysis indicates that the ZnO and Mg 0.3 Zn 0.7 O have bandgaps of 3.34 eV and 4.02 eV, respectively. The photoluminescence (PL) of the ZnO film was found to exhibit a structural defect-related emission at ~3.316 eV inherent to the nanocrystalline morphology. The PL of the Mg 0.3 Zn 0.7 O film exhibits two broad peaks at 3.38 eV and at 3.95 eV that are discussed in terms of the solubility limit of the ZnO-MgO alloy system. Additionally, external deformation of the film did not have a significant impact on its properties as indicated by the Raman LO-mode behavior, making these films attractive for UV flexible applications.

Huso, Jesse↗

Magnetism in Non-Traditional Materials

We performed a systematic microscopic investigation of two completely dissimilar materials (namely, ZnO and rhombohedral-C 60 polymers) exhibiting ferromagnetism in the presence of defects, and showed that this new phenomena has a common origin and the mechanism responsible can be used as a powerful tool for inducing and tailoring magnetic features in systems which are not magnetic otherwise. Based on our findings we proposed a general recipe for developing ferromagnetism in new materials of great technological interest. Our results support the role of complimentary pairs of defects in inducing magnetism in otherwise non-magnetic materials belonging to two widely differing classes with no apparent correlation between them. In both classes, ferromagnetism is found to be enhanced when the two kinds of defects form structures (pathways) of alternating effective donor and acceptor crystal sites leading to the development of electron charge and spin density like waves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural phase transitions and topological defects in ion Coulomb crystals

We use laser-cooled ion Coulomb crystals in the well-controlled environment of a harmonic radiofrequency ion trap to investigate phase transitions and defect formation. Topological defects in ion Coulomb crystals (kinks) have been recently proposed for studies of nonlinear physics with solitons and as carriers of quantum information. Defects form when a symmetry breaking phase transition is crossed non-adiabatically. For a second order phase transition, the Kibble-Zurek mechanism predicts that the formation of these defects follows a power law scaling in the rate of the transition. We demonstrate a scaling of defect density and describe kink dynamics and stability. We further discuss the implementation of mass defects and electric fields as first steps toward controlled kink preparation and manipulation.

74 ATOMIC AND MOLECULAR PHYSICS↗

The Crystal Backlighter Imager JGBuscho Comprehensive Report 2019

The National Ignition Facility (NIF) is a system of 192 lasers indirectly pointed at a target roughly the size of a millimeter. This target is held at the center of a vacuum chamber 30 feet in diameter. Diagnostics to understand the laser implosion and interaction of the target are inserted into the target chamber during laser shots on Diagnostic Insertion Manipulators (DIMs). Diagnostics are attached to these DIMs as complex assemblies known as snouts. The Crystal Backlighter Imager (CBI) is a snout used to radiograph the capsule implosion. The x-ray radiography of the imploding targets has been used in the past at the NIF with pinhole imaging. A limitation of the pinhole imaging systems is the radiograph becomes overwhelmed with self-emission and key features of the implosion are not visible late in time during the implosion. CBI implements a spherically bent crystal matched to a backlighter atomic line. By doing so, the backlighter atomic line can dominate the self-emission thus allowing the crystals narrow bandwidth to image late in time radiographs. This ability allows for visualizing the capsule structure and defects.

42 ENGINEERING↗

Literary review and modeling outlook for radiation damage in fused-silica optical fibers

The purpose of this document is to distill, from literature, the effects of radiation damage in fused-silica optical fibers. This information will be used to design a theoretical framework capable of predictive modeling that will be published elsewhere. By inspection of the relevant literature, the devised method is calculation of defect amorphous structures by molecular dynamic techniques, and computation of the macroscopic dielectric function using density functional theory. The dielectric function is then used to directly compute the transmittance of the core material before and after irradiation via solution of Maxwell’s equations in a homogeneous medium.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗