Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

An Experimental and Theoretical Study of the Valence Shell Electronic Structure of Nitromethane

Vibrationally resolved CH 3 NO 2 and CD 3 NO 2 photoelectron spectra and angular distribution parameters, β, have been measured in the photon energy range 20–80 eV. This allows a comprehensive investigation of conflicting literature interpretations of the two outermost photoelectron bands, complemented by high-level calculations characterizing the three O lone-pair-based orbital ionizations expected in this region. Franck–Condon simulations allow the regular vibrational progressions observed at the beginning of the first and second bands to be assigned as predominantly modes v 5 and v 6 of the D 0 and D 2 cation states, respectively. Irregular structuring observed midband in both bands is attributed to avoided crossings between the adiabatic D 0 /D 1 and D 1 /D 2 states as identified in potential surface cuts taken along the v 5 and v 6 normal mode coordinates. The associated D 0 /D 1 and D 1 /D 2 conical intersections were located and characterized, allowing possible vibronic coupling and its impact on the photoelectron spectra of the D 0 , D 1 , and D 2 states to be discussed. This helps rationalize the apparently missing D 1 ionization in this region, although some contribution by this state may be identifiable in the β-parameter spectra. Theoretical analysis of the complete valence region spectrum identifies the early breakdown of the independent electron model beyond these first two bands.

Powis, Ivan [University of Nottingham (United King↗

The effect of oxide shell thickness on the structural, electronic, and optical properties of Si-SiO{sub 2} core-shell nano-crystals: A (time dependent)density functional theory study

Due to their tunable properties, silicon nano-crystals (NC) are currently being investigated. Quantum confinement can generally be employed for size-dependent band-gap tuning at dimensions smaller than the Bohr radius (∼5 nm for silicon). At the nano-meter scale, however, increased surface-to-volume ratio makes the surface effects dominant. Specifically, in Si-SiO{sub 2} core-shell semiconductor NCs the interfacial transition layer causes peculiar electronic and optical properties, because of the co-existence of intermediate oxidation states of silicon (Si{sup n+}, n = 0–4). Due to the presence of the many factors involved, a comprehensive understanding of the optical properties of these NCs has not yet been achieved. In this work, Si-SiO{sub 2} NCs with a diameter of 1.1 nm and covered by amorphous oxide shells with thicknesses between 2.5 and 4.75 Å are comprehensively studied, employing density functional theory calculations. It is shown that with increased oxide shell thickness, the low-energy part of the optical transition spectrum of the NC is red shifted and attenuated. Moreover, the absorption coefficient is increased in the high-energy part of the spectrum which corresponds to SiO{sub 2} transitions. Structural examinations indicate a larger compressive stress on the central silicon cluster with a thicker oxide shell. Examination of the local density of states reveals the migration of frontier molecular orbitals from the oxide shell into the silicon core with the increase of silica shell thickness. The optical and electrical properties are explained through the analysis of the density of states and the spatial distribution of silicon sub-oxide species.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, electronic, and magnetic properties of nearly ideal J eff = 1/2 iridium halides

Heavy transition metal magnets with J e f f = 1 2 electronic ground states have attracted recent interest due to their penchant for hosting new classes of quantum spin liquids and superconductors. Unfortunately, model systems with ideal J e f f = 1 2 states are scarce due to the importance of noncubic local distortions in most candidate materials. In this work, we identify a family of iridium halide systems [i.e., K 2 Ir Cl 6 , K 2 Ir Br 6 , ( NH 4 ) 2 Ir Cl 6 , and Na 2 Ir Cl 6 · 6 ( H 2 O ) ] with Ir 4 + electronic ground states exhibiting extremely small deviations from the ideal J e f f = 1 2 limit. We also find ordered magnetic ground states for the three anhydrous systems, with single-crystal neutron diffraction on K 2 Ir Br 6 revealing type-I antiferromagnetism. This spin configuration is consistent with expectations for significant Kitaev exchange in a face-centered-cubic magnet. This work establishes that incorporating isolated Ir X 6 octahedra in materials, where X is a halogen ion with a low electronegativity, is an effective design principle for realizing unprecedented proximity to the pure J e f f = 1 2 state. However, at the same time, we highlight undeniable deviations from this ideal state, even in clean materials with ideal Ir X 6 octahedra as inferred from the global cubic crystal structures.

36 MATERIALS SCIENCE↗

Evaluating the electronic structure of formal Ln II ions in Ln II (C 5 H 4 SiMe 3 ) 3 1– using XANES spectroscopy and DFT calculations

Here, the isolation of [K(2.2.2-cryptand)][Ln(C 5 H 4 SiMe 3 ) 3 ], formally containing LnII, for all lanthanides (excluding Pm ) was surprising given that +2 oxidation states are typically regarded as inaccessible for most 4f-elements. Herein, X-ray absorption near-edge spectroscopy (XANES), ground-state density functional theory (DFT), and transition dipole moment calculations are used to investigate the possibility that Ln(C 5 H 4 SiMe 3 ) 3 1– (Ln = Pr, Nd, Sm, Gd, Tb, Dy, Y, Ho, Er, Tm, Yb and Lu) compounds represented molecular Ln II complexes. Results from the ground-state DFT calculations were supported by additional calculations that utilized complete-active-space multi-configuration approach with second-order perturbation theoretical correction (CASPT2). Through comparisons with standards, Ln(C 5 H 4 SiMe 3 ) 3 1– (Ln = Sm, Tm, Yb, Lu, Y) are determined to contain 4f 6 5d 0 (Sm II ), 4f 13 5d 0 (Tm II ), 4f 14 5d 0 (Yb II ), 4f 14 5d 1 (Lu II ), and 4d 1 (Y II ) electronic configurations. Additionally, our results suggest that Ln(C 5 H 4 SiMe 3 ) 3 1– (Ln = Pr, Nd, Gd, Tb, Dy, Ho, and Er) also contain Ln II ions, but with 4f n 5d 1 configurations (not 4f n +1 5d 0 ). In these 4f n 5d 1 complexes, the C 3h -symmetric ligand environment provides a highly shielded 5d-orbital of a' symmetry that made the 4f n 5d 1 electronic configurations lower in energy than the more typical 4f n+1 5d 0 configuration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Be₂C as a neutron moderator for molten salt reactors: A first-principles study of structural, electronic, and defect properties

Beryllium carbide (Be 2 C), valued for its high neutron moderation efficiency and low absorption cross section, is a promising high-temperature neutron moderator for molten salt reactors. Its practical adoption, however, demands significant technological maturation, requiring comprehensive theoretical and experimental studies of its response to different conditions, including high temperature and irradiation. Here, we report initial results on the fundamental properties and radiation-induced defects of Be 2 C, focusing on antisites, vacancies, interstitial atoms, and Frenkel pairs in the Be and C sublattices. Using density functional theory (DFT) and ab initio molecular dynamics (AIMD), we calculate the defects formation and binding energies, evaluating their dependence on the supercell size, charge states, and chemical environment. In general, carbon defects exhibit higher formation energies, greater sensitivity to cell size, and stronger impacts on the density of states compared to beryllium defects, with charged state the effects being more pronounced. Static DFT reveals multiple metastable interstitial configurations, while AIMD identifies ground states as C-C <100> dumbbells and octahedral Be interstitials. In conclusion, the diversity of metastable configurations and defect states complicates the diffusion mechanisms, requiring further molecular dynamics analysis to elucidate the mechanisms and rates of radiation-induced atomic transport, as well as the structural stability of Be2C.

Ab initio modeling↗

The investigation of Ag/ZnO interface system by first principle: The structural, electronic and optical properties

Ag/ZnO interfaces have been investigated for both of Zn-termination and O-termination by the first principle based on density functional theory. Our calculations demonstrate that the Ag atoms go inward from the Ag/ZnO interface, and the Zn and O atoms are all move outward bulk in the Zn-termination interface, and the changes are just opposite for O-termination. These behaviors are in agreement with the other studies in literatures. Furthermore, an expansion situation is observed in the first two Zn-O bilayer and first three Ag monolayers for both of Zn-termination and O-termination interfaces by comparing with the pure ZnO(0001) and Ag(111) surfaces. Moreover, the valence-band both of O-2p and Zn-3d states of Ag/ZnO interface gradual close to Femi level as the Zn, O atoms locate at the deeper layer for Zn-termination, but it is the other way round for O-termination. Calculated absorption spectrum indicates that the absorption intensity of Zn-termination interface is stronger than that of O-termination in the lower energy range (visible light region). These properties of ZnO surfaces are also evaluated for comparison with interfaces. - Graphical abstract: The structures of Ag/ZnO interface: Zn-termination (left) and O-termination (right). In this Ag/ZnO interface system, the ZnO (0001) surface is rotated 30°(R30), and Ag (111) surface is built (2×2) supercell, then a (2×√3) R30 Ag/ZnO interface is constructed using the supercell method (i.e. periodically repeated slabs). The lattice mismatch of (2×√3) R30 Ag/ZnO (2.6% mismatch) is smaller than that of (1×1) Ag/ZnO (11% mismatch).

36 MATERIALS SCIENCE↗

The effect of a Ta oxygen scavenger layer on HfO 2 -based resistive switching behavior: Thermodynamic stability, electronic structure, and low-bias transport

Reversible resistive switching between high-resistance and low-resistance states in metal-oxide-metal heterostructures makes them very interesting for applications in random access memories. While recent experimental work has shown that inserting a metallic "oxygen scavenger layer'' between the positive electrode and oxide improves device performance, the fundamental understanding of how the scavenger layer modifies the heterostructure properties is lacking. We use density functional theory to calculate thermodynamic properties and conductance of TiN/HfO 2 /TiN heterostructures with and without a Ta scavenger layer. First, we show that Ta insertion lowers the formation energy of low-resistance states. Second, while the Ta scavenger layer reduces the Schottky barrier height in the high-resistance state by modifying the interface charge at the oxide-electrode interface, the heterostructure maintains a high resistance ratio between high-and low-resistance states. Lastly, we show that the low-bias conductance of device on-states becomes much less sensitive to the spatial distribution of oxygen removed from the HfO 2 in the presence of the Ta layer. By providing a fundamental understanding of the observed improvements with scavenger layers, we open a path to engineer interfaces with oxygen scavenger layers to control and enhance device performance. In turn, this may enable the realization of a non-volatile low-power memory technology with concomitant reduction in energy consumption by consumer electronics and offering significant benefits to society.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure, magnetic correlations, and superconducting pairing in the reduced Ruddlesden-Popper bilayer La 3 Ni 2 O 6 under pressure: Different role of d 3 z 2 - r 2 orbital compared with La 3 Ni 2 O 7

The recent discovery of superconductivity in bilayer La 3 Ni 2 O 7 (327-LNO) under pressure stimulated much interest in layered nickelates. However, superconductivity was not found in another bilayer nickelate system, La 3 Ni 2 O 6 (326-LNO), even under pressure. To understand the similarities and differences between 326-LNO and 327-LNO, using density functional theory and the random phase approximation (RPA), we systematically investigate 326-LNO under pressure. The large crystal-field splitting between the e g orbitals caused by the missing apical oxygen moves the d 3z 2 -r 2 orbital farther away from the Fermi level, implying that the d 3z 2 -r 2 orbital plays a less important role in 326-LNO than in 327-LNO. This also results in a smaller bandwidth for the d x 2 -y 2 orbital and a reduced energy gap for the bonding-antibonding splitting of the d 3z 2 -r 2 orbital in 326-LNO, as compared to 327-LNO. Moreover, the in-plane hybridization between the d x 2 -y 2 and d 3z 2 -r 2 orbitals is found to be small in 326-LNO, while it is much stronger in 327-LNO. Furthermore, the low-spin ferromagnetic state is found to be the likely ground state in 326-LNO under high pressure. The weak interlayer coupling suggests that s ± -wave pairing is unlikely in 326-LNO. The robust in-plane ferromagnetic coupling also suggests that d-wave superconductivity, which is usually caused by antiferromagnetic fluctuations of the d x 2 -y 2 orbital, is also unlikely in 326-LNO. These conclusions are supported by our many-body RPA calculations of the pairing behavior. Additionally, contrasting with the cuprates, for the bilayer cuprate HgBa 2 CaCu 2 O 6 , we find a strong self-doping effect of the d x 2 -y 2 orbital under pressure, with the charge of Cu being reduced by approximately 0.13 electrons from 0 GPa to 25 GPa. In contrast, we do not observe such a change in the electronic density in 326-LNO under pressure, establishing another important difference between the nickelates and the cuprates.

36 MATERIALS SCIENCE↗

Modulating Electronic Structure of Atomically Dispersed Nickel Sites through Boron and Nitrogen Dual Coordination Boosts Oxygen Reduction

Abstract Atomically dispersed 3D transitional metal active sites with nitrogen coordination anchored on carbon support have emerged as a kind of promising electrocatalyst toward oxygen reduction reaction (ORR) in the field of fuel cells and metal–air cells. However, it is still a challenge to accurately modulate the coordination structure of single‐atom metal sites, especially first‐shell coordination, as well as identify the relationship between the geometric/electronic structure and ORR performance. Herein, a carbon‐supported single‐atom nickel catalyst is fabricated with boron and nitrogen dual coordination (denoted as Ni‐B/N‐C). The hard X‐ray absorption spectrum result reveals that atomically dispersed Ni active sites are coordinated with one B atom and three N atoms in the first shell (denoted as Ni‐B 1 N 3 ). The Ni‐B/N‐C catalyst exhibits a half‐wave potential ( E 1/2 ) of 0.87 V versus RHE, along with a distinguished long‐term durability in alkaline media, which is superior to commercial Pt/C. Density functional theory calculations indicate that the Ni‐B 1 N 3 active sites are more favorable for the adsorption of ORR intermediates relative to Ni‐N 4 , leading to the reduction of thermodynamic barrier and the acceleration of reaction kinetics, which accounts for the increased intrinsic activity.

Chemistry↗

In-Gap States in Electronic Structure of Nonpolar Surfaces of Insulating Metal Oxides

Ab initio calculations show that a cleanly cleaved nonpolar surface of considered nonmagnetic insulating metal oxides always has a band gap. If the bulk valence band edge has mainly oxygen 2p character while the bulk conduction band edge has mainly metal d character, then there is no in-the-band-gap surface state. A simple procedure to identify the polarity of a given arbitrary surface is presented.

Chemistry↗

Tuning the Electronic Structure of LaNiO 3 through Alloying with Strontium to Enhance Oxygen Evolution Activity

The perovskite oxide LaNiO 3 is a promising oxygen electrocatalyst for renewable energy storage and conversion technologies. Here, it is shown that strontium substitution for lanthanum in coherently strained, epitaxial LaNiO 3 films (La 1-x Sr x NiO 3 ) significantly enhances the oxygen evolution reaction (OER) activity, resulting in performance at x = 0.5 comparable to the state-of-the-art catalyst Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ . By combining X-ray photoemission and X-ray absorption spectroscopies with density functional theory, it is shown that an upward energy shift of the O 2p band relative to the Fermi level occurs with increasing x in La 1-x Sr x NiO 3 . This alloying step strengthens Ni 3d–O 2p hybridization and decreases the charge transfer energy, which in turn accounts for the enhanced OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Electronic Structure, and Reactivity of a Planar Four‐Coordinate, Cobalt–Imido Complex

Abstract A four‐coordinate cobalt–imido complex, ( t Bu mPNP)Co=NMes ( t Bu mPNP=modified PNP pincer ligand) has been synthesized from addition of 2,4,6‐trimethylphenylazide (Mes–N 3 ) to the corresponding dinitrogen complex. The solid‐state structure determined by X‐ray diffraction established a rare, idealized planar geometry with a Co=N bond distance of 1.716(2) Å. Magnetic measurements revealed an S =1 ground state with CAS‐SCF calculations supporting radical character on the imide nitrogen. Thermolysis of the cobalt–imido compound induced selective insertion of the imido group into a Co−P bond and yielded a three‐coordinate cobalt complex with a distorted T‐shaped geometry. Transition state analysis conducted with DFT calculations established the thermodynamic stability of the P–N coupled product and provided insight into the exclusive selectivity.

Park, Yoonsu↗