Search NASA⌕ Search

SEARCH · Search NASA

Results for “function composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Novel chemoresistive CH{sub 4} sensor with 10 ppm sensitivity based on multiwalled carbon nanotubes functionalized with SnO{sub 2} nanocrystals

Chemoresistive sensors based on multiwalled carbon nanotubes (MWCNTs) functionalized with SnO{sub 2} nanocrystals (NCs) have great potential for detecting trace gases at low concentrations (single ppm levels) at room temperature, because the SnO{sub 2} nanocrystals act as active sites for the chemisorption of gas molecules, and carbon nanotubes (CNTs) act as an excellent current carrying platform, allowing the adsorption of gas on SnO{sub 2} to modulate the resistance of the CNTs. However, uniform conjugation of SnO{sub 2} NCs with MWCNTs is challenging. An effective atomic layer deposition based approach to functionalize the surface of MWCNTs with SnO{sub 2} NCs, resulting in a novel CH{sub 4} sensor with 10 ppm sensitivity, is presented in this paper. Scanning electron microscopy, transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy, and Raman spectroscopy were implemented to study the morphology, elemental composition, and the crystal quality of SnO{sub 2} functionalized MWCNTs. High resolution TEM images showed that the crystal quality of the functionalizing SnO{sub 2} NCs was of high quality with clear lattice fringes and the dimension almost three times smaller than shown thus far in literature. A lift-off based photolithography technique comprising bilayer photoresists was optimized to fabricate SnO{sub 2} functionalized MWCNTs-based chemoresistor sensor, which at room temperature can reliably sense below 10 ppm of CH{sub 4} in air. Such low level gas sensitivity, with significant reversible relative resistance change, is believed to be the direct result of the successful functionalization of the MWCNT surface by SnO{sub 2} NCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanochemical spinodal decomposition: a phenomenological theory of phase transformations in multi-component, crystalline solids

Here, we present a phenomenological treatment of diffusion-driven martensitic phase transformations in multi-component crystalline solids that arise from non-convex free energies in mechanical and chemical variables. The treatment describes diffusional phase transformations that are accompanied by symmetry-breaking structural changes of the crystal unit cell and reveals the importance of a mechanochemical spinodal, defined as the region in strain-composition space, where the free-energy density function is non-convex. The approach is relevant to phase transformations wherein the structural order parameters can be expressed as linear combinations of strains relative to a high-symmetry reference crystal. The governing equations describing mechanochemical spinodal decomposition are variationally derived from a free-energy density function that accounts for interfacial energy via gradients of the rapidly varying strain and composition fields. A robust computational framework for treating the coupled, higher-order diffusion and nonlinear strain gradient elasticity problems is presented. Because the local strains in an inhomogeneous, transforming microstructure can be finite, the elasticity problem must account for geometric nonlinearity. An evaluation of available experimental phase diagrams and first-principles free energies suggests that mechanochemical spinodal decomposition should occur in metal hydrides such as ZrH 2-2c . The rich physics that ensues is explored in several numerical examples in two and three dimensions, and the relevance of the mechanism is discussed in the context of important electrode materials for Li-ion batteries and high-temperature ceramics.

36 MATERIALS SCIENCE↗

Effect of gamma irradiation on hyaluronic acid and dipalmitoylphosphatidylcholine (DPPC) interaction

DPPC lipids are the major component constituting the biological membrane, and their importances in various physiological functions are well documented. Hyaluronic acid (HA) in the synovial joint fluid functions as a lubricant, shock absorber and a nutrient carrier. Gamma irradiation has also been found to be effective in depolymerizing and cleaving molecular chains related to free radicals, thus extends with changes in chemical composition as well as its physiological functions. This research are conducted to investigate the hyaluronic acid (HA) and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) interaction in form of vesicles and its effect to gamma radiation. The size of DPPC vesicles formed via gentle hydration method is between 100 to 200 nm in diameter. HA (0.1, 0.5 and 1.0 mg/ml) was added into the vesicles and characterized by using TEM to determine vesicle size distributions, fusion and rupture of DPPC structure. The results demonstrated that the size of the vesicles approximately between 200 to 300 nm which caused by vesicles fusion with HA and formed even larger vesicles. After being irradiated by 0 to 200 Gy, the size of vesicles decreased as HA was degraded. To elucidate the mechanism of these effects, FTIR spectra were carried out and have shown that at absorption bands at 1700–1750 cm{sup −1} due to formation of carboxylic acid and leads to alteration of HA structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Small bimetallic clusters Agn-1M (M = Au, Co, Cu, Ni, Pd, Pt; n = 3, 9, 15): Density functional theory and genetic algorithm

We investigated the effect of size and composition on the properties of bimetallic nanoclusters. The geometric structures, stabilities, and electronic properties of size-selected Ag n-1 M (M = Au, Co, Cu, Ni, Pd, Pt; n = 3, 9, 15) bimetallic nanoclusters are systematically analyzed using spin-polarized density functional theory (DFT) within the generalized gradient approximation (GGA). We determine the most stable geometries for these clusters using a genetic algorithm (GA) in combination with DFT. Our results show that doping pure silver clusters with an M atom (transition metal), referred to as a “guest atom”, increases the stability as compared to pure Ag n (n = 3, 9, 15) clusters. The results for various properties including formation energy per atom, electronic structure, magnetic moments, and vibrational density of states (VDOS) are evaluated as a function of both size and composition of the system. The adsorption of selected bimetallic clusters on hydroxylated alumina substrate shows weak binding and minor changes in geometric properties except for Ag 8 Pt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Novel Environmentally Compatible Bio-Based Product from Gelatin and Natural Rubber: Physical Properties

The objective of the present work was to study the preparation of a novel bio-based product from gelatin (GT) and natural rubber (NR) using potassium persulphate (KPS) as an initiator. The GT and NR composites (GT/NR composites) containing KPS were formed in an aqueous latex solution. The chemical structure of the GT/NR composite was characterized by ATR-FTIR, and XRD. The highest tensile strength was observed in a 9/1 GT/NR composite and the elongation at break of this composite was improved by the addition of both NR and glycerol. In addition, the swelling ratio increased as a function of increasing GT content in the composite. The thermal stability of the GT was improved after the formation of the chemical interaction between the NR and GT helped by the KPS. The best ratio of the GT/NR composite was 3/7 GT/NR. This environmentally friendly composite easily decomposed in natural soil within 30 days. The novel biopolymer showed high mechanical properties, water resistance and was produced in an environmentally compatible process. The NR was able to improve some of the physical and mechanical properties of GT biofilms produced from the composite. Possible future applications of this composite are for medical materials, and the packaging and life extension of food products.

36 MATERIALS SCIENCE↗

Neuromorphic Computing is Turing-Complete

Neuromorphic computing is a non-von Neumann computing paradigm that performs computation by emulating the human brain. Neuromorphic systems are extremely energy-efficient and known to consume thousands of times less power than CPUs and GPUs. They have the potential to drive critical use cases such as autonomous vehicles, edge computing and internet of things in the future. For this reason, they are sought to be an indispensable part of the future computing landscape. Neuromorphic systems are mainly used for spike-based machine learning applications, although there are some non-machine learning applications in graph theory, differential equations, and spike-based simulations. These applications suggest that neuromorphic computing might be capable of general-purpose computing. However, general-purpose computability of neuromorphic computing has not been established yet. In this work, we prove that neuromorphic computing is Turing-complete and therefore capable of general-purpose computing. Specifically, we present a model of neuromorphic computing, with just two neuron parameters (threshold and leak), and two synaptic parameters (weight and delay). We devise neuromorphic circuits for computing all the μ-recursive functions (i.e., constant, successor and projection functions) and all the μ-recursive operators (i.e., composition, primitive recursion and minimization operators). Given that the μ-recursive functions and operators are precisely the ones that can be computed using a Turing machine, this work establishes the Turing-completeness of neuromorphic computing.

Date, Prasanna↗

Templated Assembly of a Functional Ordered Protein Macromolecular Framework from P22 Virus-like Particles

Bottom-up construction of mesoscale materials using biologically derived nanoscale building blocks enables engineering of desired physical properties using green production methods. Virus-like particles (VLPs) are exceptional building blocks due to their monodispersed sizes, geometric shapes, production ease, proteinaceous composition, and our ability to independently functionalize the interior and exterior interfaces. Here a VLP, derived from bacteriophage P22, is used as a building block for the fabrication of a protein macromolecular framework (PMF), a tightly linked 3D network of functional protein cages that exhibit long-range order and catalytic activity. Assembly of PMFs was electrostatically templated, using amine-terminated dendrimers, then locked into place with a ditopic cementing protein that binds to P22. Long-range order is preserved on removal of the dendrimer, leaving a framework material composed completely of protein. Furthermore, encapsulation of β-glucosidase enzymes inside of P22 VLPs results in formation of stable, condensed-phase materials with high local concentration of enzymes generating catalytically active PMFs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface Termination Dependent Work Function and Electronic Properties of Ti 3 C 2 T x MXene

MXenes, an emerging family of 2D transition metal carbides and nitrides, have shown promise in various applications, such as energy storage, electromagnetic interference shielding, conductive thin films, photonics, and photothermal therapy. Their metallic nature, wide range of optical absorption, and tunable surface chemistry are the key to their success in those applications. The physical properties of MXenes are known to be strongly dependent on their surface terminations. In this study, we investigated the electronic properties of Ti 3 C 2 T x for different surface terminations, as achieved by different annealing temperatures, with the help of photoelectron spectroscopy, inverse photoelectron spectroscopy, and density functional theory calculations. We find that fluorine occupies solely the face-centered cubic adsorption site, whereas oxygen initially occupies at least two different adsorption sites, followed by a rearrangement after fluorine desorption at high annealing temperatures. The measured electronic structure of Ti 3 C 2 T x showed strong dispersion of more than 1 eV, which we conclude to stem from Ti–O bonds by comparing it to calculated band structures. We further measured the work function of Ti 3 C 2 T x as a function of annealing temperature and found that it is in the range of 3.9–4.8 eV, depending on the surface composition. A comparison of the experimental work function to detailed density functional theory calculations shows that the measured value is not simply an average of the work function values of uniformly terminated Ti 3 C 2 surfaces but that the interplay between the different surface moieties and their local dipoles plays a crucial role.

36 MATERIALS SCIENCE↗

Economic competitiveness of pultruded fiber composites for wind turbine applications

Pultrusion manufacturing of fiber reinforced polymers has been shown to yield some of the highest mechanical properties for unidirectional composites, having a high degree of fiber alignment with consistent performance. Pultrusions offer a low-cost manufacturing approach for producing unidirectional composites with a constant cross-section and are used in many applications, including spar caps of wind turbine blades. However, as an intermediate processing step for wind blades, the additional cost of manufacturing pultrusions must be accompanied by sufficient increases in mechanical performance and system benefits. Wind turbine blades are manufactured using vacuum-assisted resin transfer molding with infused unidirectional fiberglass or carbon pultrusions for the spar cap. Infused fiberglass composites are among the most cost-effective structural materials available and replacing this material in the cost-driven wind industry has proven challenging, where infused fiberglass spar caps are still the predominant material system in use. To evaluate alternative material systems in a pultruded composite form, it is necessary to understand the costs for this additional manufacturing step which are shown to add 33%–55% on top of the material costs. A pultrusion cost model has been developed and used to quantify cost sensitivities to various processing parameters. The mechanical performance for pultruded composites is improved versus resin-infusion manufacturing with a 17% increase in design strength at a constant fiber volume fraction, but also enables higher achievable fiber volume fractions. The cost-specific mechanical performance is compared as a function of processing parameters for pultruded composites to identify the opportunities for alternative material and manufacturing approaches for wind turbine spar caps. Finally, four materials are compared in a representative wind turbine blade model to assess the performance of pultruded carbon fiber systems and pultruded fiberglass relative to infused fiberglass, where the pultruded systems produce lower weight blades with various cost distinctions.

42 ENGINEERING↗

3D-printed poly(vinylidene fluoride)/carbon nanotube composites as a tunable, low-cost chemical vapour sensing platform

We report the production of flexible, highly-conductive poly(vinylidene flouride) (PVDF) and multi-walled carbon nanotube (MWCNT) composites as filament feedstock for 3D-printing. This account further describes, for the first-time, fused deposition modelling (FDM) derived 3D-printed objects with chemiresistive properties in response to volatile organic compounds. The typically prohibitive thermal expansion and die swell characteristics of PVDF were minimized by the presence of MWCNTs in the composites enabling straightforward processing and printing. The nanotubes form a dispersed network as characterized by helium ion microscopy, contributing to excellent conductivity (1 x 10-2 S / cm). The printed composites contain little residual metal particulate relative to parts from commercial PLA-nanocomposite material visualized by micro X-ray computed tomography (μ-CT) and corroborated with thermogravimetric analysis. Printed sensing strips, with MWCNT loadings up to 15 % mass, function as reversible vapour sensors with the strongest responses arising with organic compounds capable of readily intercalating, and subsequently swelling the PVDF matrix (acetone and ethyl acetate). A direct correlation between MWCNT concentration and resistance change was also observed, with larger responses (up to 161 % after 3 minutes) generated with decreased MWCNT loadings. These findings highlight the utility of FDM printing in generating low-cost sensors that respond strongly and reproducibly to target vapours. Furthermore, the sensors can be easily printed in different geometries, expanding their utility to wearable form factors. The proposed formulation strategy may be tailored to sense diverse sets of vapour classes through structural modification of the polymer backbone and/or functionalization of the nanotubes within the composite.

3D-Printing↗

Binary Superlattice Design by Controlling DNA-Mediated Interactions

Most binary superlattices created using DNA functionalization rely on particle size differences to achieve compositional order and structural diversity. Here we study two-dimensional (2D) assembly of DNA-functionalized micron-sized particles (DFPs), and employ a strategy that leverages the tunable disparity in interparticle interactions, and thus enthalpic driving forces, to open new avenues for design of binary superlattices that do not rely on the ability to tune particle size (i.e., entropic driving forces). Our strategy employs tailored blends of complementary strands of ssDNA to control interparticle interactions between micron-sized silica particles in a binary mixture to create compositionally diverse 2D lattices. We show that the particle arrangement can be further controlled by changing the stoichiometry of the binary mixture in certain cases. With this approach, we demonstrate the ability to program the particle assembly into square, pentagonal, and hexagonal lattices. In addition, different particle types can be compositionally ordered in square checkerboard and hexagonal–alternating string, honeycomb, and Kagome arrangements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elevated carbon dioxide is predicted to promote coexistence among competing species in a trait‐based model

Abstract Differential species responses to atmospheric CO 2 concentration (C a ) could lead to quantitative changes in competition among species and community composition, with flow‐on effects for ecosystem function. However, there has been little theoretical analysis of how elevated C a ( eC a ) will affect plant competition, or how composition of plant communities might change. Such theoretical analysis is needed for developing testable hypotheses to frame experimental research. Here, we investigated theoretically how plant competition might change under eC a by implementing two alternative competition theories, resource use theory and resource capture theory, in a plant carbon and nitrogen cycling model. The model makes several novel predictions for the impact of eC a on plant community composition. Using resource use theory, the model predicts that eC a is unlikely to change species dominance in competition, but is likely to increase coexistence among species. Using resource capture theory, the model predicts that eC a may increase community evenness. Collectively, both theories suggest that eC a will favor coexistence and hence that species diversity should increase with eC a . Our theoretical analysis leads to a novel hypothesis for the impact of eC a on plant community composition. This hypothesis has potential to help guide the design and interpretation of eC a experiments.

54 ENVIRONMENTAL SCIENCES↗

A Proximity Labeling Strategy Provides Insights into the Composition and Dynamics of Lipid Droplet Proteomes

Lipid droplet (LD) functions are regulated by a complement of integral and peripheral proteins that associate with the bounding LD phospholipid monolayer. Defining the composition of the LD proteome has remained a challenge due to the presence of contaminating proteins in LD-enriched buoyant fractions. To overcome this limitation, we developed a proximity labeling strategy that exploits LD-targeted APEX2 to biotinylate LD proteins in living cells. Application of this approach to two different cell types identified the vast majority of previously validated LD proteins, excluded common contaminating proteins, and revealed new LD proteins. Moreover, quantitative analysis of LD proteome dynamics uncovered a role for endoplasmic reticulum-associated degradation in controlling the composition of the LD proteome. In conclusion, these data provide an important resource for future LD studies and demonstrate the utility of proximity labeling to study the regulation of LD proteomes.

59 BASIC BIOLOGICAL SCIENCES↗

Dielectric breakdown properties of SF{sub 6}-N{sub 2} mixtures at 0.01-1.6 MPa and 300-3000 K

The dielectric breakdown properties of SF{sub 6}-N{sub 2} mixtures were investigated at different concentrations of N{sub 2}, 0.01-1.6 MPa, and 300-3000 K. The equilibrium compositions of different SF{sub 6}-N{sub 2} mixtures at several gas pressures and temperatures up to 3000 K were first calculated by minimizing the Gibbs free energy under the assumptions of local thermodynamic and chemical equilibrium. The electron energy distribution function was then obtained using the composition data by Boltzmann equation analysis. It was found that adding N{sub 2} to SF{sub 6} gas can markedly reduce the kinetic energy of electrons at relatively high gas temperatures, which enhances the dielectric field strength. Finally, the critical reduced electric field (E/N){sub cr}, defined as the value for which ionization is equal to attachment, of hot SF{sub 6}-N{sub 2} mixtures was determined. The results indicate that in the gas temperature range around 2000-3000 K, increasing the concentration of N{sub 2} effectively enhances the (E/N){sub cr} of SF{sub 6}-N{sub 2} mixtures, and the (E/N){sub cr} of SF{sub 6}-N{sub 2} mixtures at a wide range of concentrations of N{sub 2} (5%, 50%, and 95%) are all higher than that of pure SF{sub 6} gas. Further, this trend exists at all the gas pressures considered (0.01-1.6 MPa).

36 MATERIALS SCIENCE↗

First-Principles Calculations of the Electrical Conductivity of Carbon Nanotubes Functionalized with Copper and Nitrogen: Implications for Electronics, Energy Storage, and Nanodevices

In this work, we investigate the electrical conductivity of carbon nanotubes (CNTs), with a particular focus on the effects of doping. Using first-principles-based approaches, we study the electronic structure, phonon dispersion, and electron–phonon scattering to understand the finite-temperature electrical transport properties in CNTs. Our study covers both prototypical metallic and semiconducting CNTs, with special emphasis on the influence of typical defects such as vacancies and the incorporation of copper or nitrogen, such as pyridinic N, pyrrolic N, graphitic N, and oxidized N. Our theoretical study shows significant improvements in the electrical conduction properties of copper-CNT composites, especially when semiconducting CNTs are functionalized with nitrogen. Doping is found to cause significant changes in the electronic density of states near the Fermi level, which affects the electrical conductivity. Calculations show that certain types of functional groups, such as N-pyrrolic, result in more than 30-fold increase in the conductivity of semiconducting CNTs compared to Cu-incorporated CNTs alone. For metallic CNTs, the conductivity is in agreement with existing experimental data, and our prediction of significant increases in conductivity with N-pyrrolic functional group is consistent with recent experimental results, demonstrating the effectiveness of doping in modifying conductivity. In conclusion, our study provides valuable insight into the electronic properties of doped CNTs and contributes to the development of ultrahigh conductivity CNT composites.

36 MATERIALS SCIENCE↗

Candida albicans biofilm–induced vesicles confer drug resistance through matrix biogenesis

Cells from all kingdoms of life produce extracellular vesicles (EVs). Their cargo is protected from the environment by the surrounding lipid bilayer. EVs from many organisms have been shown to function in cell–cell communication, relaying signals that impact metazoan development, microbial quorum sensing, and pathogenic host–microbe interactions. Here, we have investigated the production and functional activities of EVs in a surface-associated microbial community or biofilm of the fungal pathogen Candida albicans. Crowded communities like biofilms are a context in which EVs are likely to function. Biofilms are noteworthy because they are encased in an extracellular polymeric matrix and because biofilm cells exhibit extreme tolerance to antimicrobial compounds. We found that biofilm EVs are distinct from those produced by free-living planktonic cells and display strong parallels in composition to biofilm matrix material. The functions of biofilm EVs were delineated with a panel of mutants defective in orthologs of endosomal sorting complexes required for transport (ESCRT) subunits, which are required for normal EV production in diverse eukaryotes. Most ESCRT-defective mutations caused reduced biofilm EV production, reduced matrix polysaccharide levels, and greatly increased sensitivity to the antifungal drug fluconazole. Matrix accumulation and drug hypersensitivity of ESCRT mutants were reversed by addition of wild-type (WT) biofilm EVs. Vesicle complementation showed that biofilm EV function derives from specific cargo proteins. Our studies indicate that C. albicans biofilm EVs have a pivotal role in matrix production and biofilm drug resistance. Biofilm matrix synthesis is a community enterprise; prior studies of mixed cell biofilms have demonstrated extracellular complementation. Therefore, EVs function not only in cell–cell communication but also in the sharing of microbial community resources.

59 BASIC BIOLOGICAL SCIENCES↗

Local structural distortions drive magnetic molecular field in compositionally complex spinel oxide

Understanding how local distortions determine the functional properties of high entropy materials, containing five or more elements at the same crystallographic site, is an open challenge. We address this for a compositionally complex spinel oxide (Mn 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )Cr 2 O 4 (A 5 Cr 2 O 4 ). By comparatively examining extended X-ray absorption fine structure on A 5 Cr 2 O 4 and its parent counterparts, ACr 2 O 4 , along with density functional theory calculations for multiple configurations, we find that the element-specific distortions go beyond the first neighbor. Specifically, the strong Jahn-Teller distortion present in CuCr 2 O 4 is found to be completely suppressed in A 5 Cr 2 O 4 even locally. Instead, there is a broad distribution of Cu-O and Cu-Cr bond distances, while other A-O distances acquire certain specific values. This study demonstrates the additional flexibility of a cationic sublattice in maintaining a uniform long-range structure, in contrast to previous reports showing only the accommodative anionic sublattice. The mean-field magnetic interactions of A 5 Cr 2 O 4 exhibit a striking resemblance to those of NiCr 2 O 4 , despite the presence of multiple magnetic ions and variable bond lengths. This originates from the comparability of bond lengths around Cr in both materials. Our study paves the way for a deeper understanding of the impact of local structural distortions on the physical properties of compositionally complex quantum materials.

36 MATERIALS SCIENCE↗