Search NASA⌕ Search

SEARCH · Search NASA

Results for “harmonic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

THE CENTRAL DARK MATTER DISTRIBUTION OF NGC 2976

We study the mass distribution in the late-type dwarf galaxy NGC 2976 through stellar kinematics obtained with the Visible Integral Field Replicable Unit Spectrograph Prototype and anisotropic Jeans models as a test of cosmological simulations and baryonic processes that putatively alter small-scale structure. Previous measurements of the H{alpha} emission-line kinematics have determined that the dark matter halo of NGC 2976 is most consistent with a cored density profile. We find that the stellar kinematics are best fit with a cuspy halo. Cored dark matter halo fits are only consistent with the stellar kinematics if the stellar mass-to-light ratio is significantly larger than that derived from stellar population synthesis, while the best-fitting cuspy model has no such conflict. The inferred mass distribution from a harmonic decomposition of the gaseous kinematics is inconsistent with that of the stellar kinematics. This difference is likely due to the gas disk not meeting the assumptions that underlie the analysis such as no pressure support, a constant kinematic axis, and planar orbits. By relaxing some of these assumptions, in particular the form of the kinematic axis with radius, the gas-derived solution can be made consistent with the stellar kinematic models. A strong kinematic twist in the gas of NGC 2976's center suggests caution, and we advance the mass model based on the stellar kinematics as more reliable. The analysis of this first galaxy shows promising evidence that dark matter halos in late-type dwarfs may in fact be more consistent with cuspy dark matter distributions than earlier work has claimed.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-Gaussianity and CMB aberration and Doppler

The peculiar motion of an observer with respect to the CMB rest frame induces a deflection in the arrival direction of the observed photons (also known as CMB aberration) and a Doppler shift in the measured photon frequencies. As a consequence, aberration and Doppler effects induce non trivial correlations between the harmonic coefficients of the observed CMB temperature maps. In this paper we investigate whether these correlations generate a bias on non-Gaussianity estimators f{sub NL}. We perform this analysis simulating a large number of temperature maps with Planck-like resolution (lmax = 2000) as different realizations of the same cosmological fiducial model (WMAP7yr). We then add to these maps aberration and Doppler effects employing a modified version of the HEALPix code. We finally evaluate a generalization of the Komatsu, Spergel and Wandelt non-Gaussianity estimator for all the simulated maps, both when peculiar velocity effects have been considered and when these phenomena have been neglected. Using the value v/c = 1.23 × 10{sup −3} for our peculiar velocity, we found that the aberration/Doppler induced non-Gaussian signal is at most of about half of the cosmic variance σ for f{sub NL} both in a full-sky and in a cut-sky experimental configuration, for local, equilateral and orthogonal estimators. We conclude therefore that when estimating f{sub NL} it is safe to ignore aberration and Doppler effects if the primordial map is already Gaussian. More work is necessary however to assess whether a map which contains non-Gaussianity can be significantly distorted by a peculiar velocity.

79 ASTRONOMY AND ASTROPHYSICS↗

Stability of PT and anti- PT -symmetric Hamiltonians with multiple harmonics

Hermitian Hamiltonians with time-periodic coefficients can be analyzed via Floquet theory, and have been extensively used for engineering Floquet Hamiltonians in standard quantum simulators. Generalized to non-Hermitian Hamiltonians, time periodicity offers avenues to engineer the landscape of Floquet quasienergies across the complex plane. We investigate two-level non-Hermitian PT and anti- PT -symmetric Hamiltonians with coefficients that have multiple harmonics using Floquet theory. By analytical and numerical calculations, we obtain their regions of stability, defined by real Floquet quasienergies, and contours of exceptional point (EP) degeneracies. We extend our analysis to study the phases that accompany these cyclic changes with the biorthogonality approach. Our results demonstrate that these time-periodic Hamiltonians generate a rich landscape of stable (real) and unstable (complex) regions. Published by the American Physical Society 2024

Cen, Julia (ORCID:0000000299353943)↗

Electrical Submersible Pumps: A System Modeling Approach for Power Quality Analysis With Variable Frequency Drives

This article proposes a high-level engineering guide to develop an integrated system model for power quality analysis in electrical submersible pump (ESP) applications with variable frequency drives (VFDs). Such analyses are troublesome in the industry due to the complexity of these systems. In this article, simple steps to perform system integration analyses of such arrangements, including torsional analysis, are developed. A simplified VFD-ESP model suitable for coupled electrical and mechanical analysis in steady state is proposed in all their configurations of practical interest. Such a model can be easily implemented in common simulation software, significantly reducing engineering efforts for implementation and analysis. The focus of the proposed model is the prediction of ESP failures that might result from a poor power quality caused by VFDs. Analytical expressions of different types of harmonics in these systems, as well as their accurate locations in the frequency domain, including their interharmonics and common-mode harmonics, are derived for this purpose. Further, the effectiveness of the proposed model is verified through offline and real-time hybrid simulation results. Finally, a comparison between simulation results obtained using the proposed model and measurements collected on a down-scale laboratory prototype is carried out to demonstrate the accuracy of the suggested modeling approach.

42 ENGINEERING↗

Femtosecond-laser–induced modifications in Co/Pt multilayers studied with tabletop resonant magnetic scattering

We characterize the magnetic domain structure of Co/Pt multilayer fi lms on length scales below one hundred nanometers using resonant magnetic scattering and magnetic force microscopy. The extreme ultraviolet light for the scattering experiment is created by a laser- based high-order harmonic generation source. After illumination with intense ultrashort laser pulses, we observe pronounced changes in the magnetic structure and morphology. Furthermore, this study points out the importance of a detailed analysis of the different laser-induced modifications of a magnetic thin fi lm that influence the scattering patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solar radio bursts at low frequencies

Properties of solar radio bursts observed by spacecraft at frequencies below several MHz are reviewed. In this frequency range most of the observed bursts are type III events (associated with particles) but several cases of type II emission (associated with shocks) have been reported. The analysis which lead to emission levels of type III solar bursts out to beyond 1 AU from the sun also indicate that the low frequency radiation is observed at the harmonic of the emission region plasma frequency. Simultaneous particle and radio measurements imply that the bursts are generated near the leading edge of impulsive streams of solar electrons with energies extending from several hundred keV to several keV. Recent experiments measuring the direction of arrival of the radio emission allow the exciter particles to be tracked along the interplanetary magnetic field from regions near the sun out to 1 AU.

Fainberg, J.↗

Nonlinear resonances in a class of multi-degree-of-freedom systems

An analysis is presented of the superharmonic, subharmonic, and combination resonances in a multi-degree-of-freedom system which has cubic nonlinearity and modal viscous damping and is subject to harmonic excitation. It is shown that, in the absence of internal resonances, the steady-state response contains only the modes which are directly excited. It is shown that, in the presence of internal resonances, modes other than those that are directly excited can appear in the response. The strong influence of internal resonances is exhibited in numerical examples involving hinged-clamped beams. It is shown that when a multimode solution exists the lowest mode can dominate the response, even when it is not directly excited.

Sridhar, S.↗

Onboard magnetic field modeling for Solar Maximum Mission /SMM/

Analysis and simulation results are presented for magnetic field models for use in attitude acquisition onboard Solar Maximum Mission (SMM). A study was made of the degree of the spherical harmonic expansion of the magnetic field required, considering mission requirements, modeling errors, and magnetometer quantization and biases. It is shown that a fifth-degree field is sufficient to provide two-degree roll angle determination accuracy with a residual magnetic bias of 10 milligauss. Also, a spherical harmonic expansion for the McIlwain L-parameter is included for the first time. This parameter will be telemetered to ground with experimental data. The fifth-degree expansion will provide the L-parameter to within two percent of accepted values. The additional onboard computational burden is the storage of 36 coefficients and an increase of about 15% in computation time. Prototype flight code was developed which is anticipated to require about 2000 bytes of core storage and 30 milliseconds of computation time per orbit point on the NSSC-1 computer.

Headrick, R. D.↗

Non-linear dynamic response of a wind turbine blade

The paper outlines the nonlinear dynamic analysis of an isolated three-degree flap-lag-feather wind turbine blade under a gravity field and with shear flow. Lagrangian equations are used to derive the nonlinear equations of motion of blade for arbitrarily large angular deflections. The limit cycle analysis for forced oscillations and the determination of the principal parametric resonance of the blade due to periodic forces from the gravity field and wind shear are performed using the harmonic balance method. Results are obtained first for a two-degree flap-lag blade, then the effect of the third degree of freedom (feather) is studied. The self-excited flutter solutions are obtained for a uniform wind and with gravity forces neglected. The effects of several parameters on the blade stability are examined, including coning angle, structural damping, Lock number, and feather frequency. The limit cycle flutter solution of a typical configuration shows a substantial nonlinear softening spring behavior.

Chopra, I.↗

The prediction of loads on the Boeing Helicopters Model 360 rotor

Results are presented from a test/theory correlation investigation involving three rotor-analysis codes, two full potential rotor flow CFD solvers, and data obtained from tests on the Model 360 helicopter's rotor. Attention is given to the problem of reliable higher harmonic loading prediction. It is found that the rotor hover performance and loading experimental data are in excellent agreement with a novel, full potential free-wake computational technology; the need for a multiple tip-vortex wake model's use in predicting vibratory airloads is confirmed.

Dadone, Leo↗

The Plasma Wave Environment of Europa

The Galileo spacecraft has executed nine close flybys of Jupiter's moon Europa for which plasma wave observations were obtained. This paper presents an analysis of the observations from these flybys taking into consideration the variable geometry of the trajectories in an attempt to characterize the general plasma-wave environment associated with the interaction of the Jovian magnetosphere with the moon. A wide variety of plasma-wave phenomena are found to be associated with this interaction. While there are apparently temporal variations which complicate the analysis, a crude model of the distribution of these phenomena around Europa is derived. Primarily on the upstream side of Europa, and working inward to the moon, electron-cyclotron harmonics are first observed, followed by a region within about two Europa radii of the moon with whistler-mode hiss or chorus, and culminating in a region closest to the moon where a band at the upper hybrid resonance frequency is sometimes enhanced over its ambient intensity. The wake region is approximately two Europa radii across and comprises a broadband, highly variable, and bursty electrostatic phenomenon. Upon closer inspection, these bursty emissions appear as solitary structures similar to those in Earth's auroral zone and plasma sheet boundary layer. In addition to the survey of wave phenomena in the vicinity of Europa, we provide density profiles derived primarily from the upper hybrid resonance frequency which is readily apparent throughout most of each of the flybys. Finally, we suggest that the whistler mode, electron cyclotron harmonic, and upper hybrid resonance emissions are driven by some combination of factors including variations in the magnetic field near Europa and the loss and production of plasma at Europa as a result of the interaction of the Jovian magnetosphere with the moon. By analogy with studies of the ion and electron holes and broadband electrostatic noise at Earth and Jupiter, we argue that the electrostatic solitary structures in the wake are associated with currents and beams coupling Europa to Jupiter's ionosphere.

Kurth, W. S.↗

A Theoretical Study of the Interaction of Water and Imidazole with Iron and Nickel Dications

The structures, the harmonic frequencies, and the energies of Fe2+(H2O)n(imid)m and Ni2+(H2O)n(imid)m complexes are computed using density functional theory with the B3LYP functional. A CSOV analysis shows that the bonding is mostly electrostatic in nature. Imidazole forms a stronger bond than water with both metal dications due to its larger dipole moment and polarizability. The reactions for the exchange of one water molecule by one imidazole are exothermic and up to six water molecules can be replaced by imidazoles. The trends are very similar for both metals with the displacement reactions being slightly more favorable for Ni(2+).

Ricca, Alessandra↗

AST Critical Propulsion and Noise Reduction Technologies for Future Commercial Subsonic Engines Aeroacoustic Prediction Codes - Supplement: Code Descriptions and Users Guides

This report describes work performed on Contract NAS3–27720 AoI 13 as part of the NASA Advanced Subsonic Transport (AST) Noise Reduction Technology effort. Computer codes were developed to provide quantitative prediction, design, and analysis capability for several aircraft engine noise sources. The objective was to provide improved, physics-based tools for the exploration of noise-reduction concepts and the understanding of experimental results. Methods and codes focused on fan broadband and “buzz saw” noise and on low-emissions combustor noise and complement work done by other contractors under the NASA AST program to develop methods and codes for fan harmonic tone noise and jet noise. The methods and codes developed and reported herein employ a wide range of approaches, from the strictly empirical to the completely computational, with some being semiempirical, analytical, and/or analytical/computational. Emphasis was on capturing the essential physics while still considering method or code utility as a practical design and analysis tool for everyday engineering use. Codes and prediction models were developed for: (1) an improved empirical correlation model for fan rotor exit flow mean and turbulence properties, for use in predicting broadband noise generated by rotor exit flow turbulence interaction with downstream stator vanes; (2) fan broadband noise models for rotor and stator/turbulence interaction sources including 3D effects, noncompact-source effects, directivity modeling, and extensions to the rotor supersonic tip-speed regime; (3) fan multiple-pure-tone in-duct sound pressure prediction methodology based on CFD analysis; and (4) low-emissions combustor prediction methodology and computer code based on CFD and actuator disk theory. In addition, the relative importance of dipole and quadrupole source mechanisms was studied using direct CFD source computation for a simple cascade/gust interaction problem, and an empirical combustor-noise correlation model was developed from engine acoustic test results. This work provided several insights on potential approaches to reducing aircraft engine noise. Code development is described in Volume I, and those insights are discussed. Volume II documents the computer codes developed and gives instructions on how to use them.

Philip Gliebe↗

Force analysis of magnetic bearings with power-saving controls

Most magnetic bearing control schemes use a bias current with a superimposed control current to linearize the relationship between the control current and the force it delivers. For most operating conditions, the existence of the bias current requires more power than alternative methods that do not use conventional bias. Two such methods are examined which diminish or eliminate bias current. In the typical bias control scheme it is found that for a harmonic control force command into a voltage limited transconductance amplifier, the desired force output is obtained only up to certain combinations of force amplitude and frequency. Above these values, the force amplitude is reduced and a phase lag occurs. The power saving alternative control schemes typically exhibit such deficiencies at even lower command frequencies and amplitudes. To assess the severity of these effects, a time history analysis of the force output is performed for the bias method and the alternative methods. Results of the analysis show that the alternative approaches may be viable. The various control methods examined were mathematically modeled using nondimensionalized variables to facilitate comparison of the various methods.

Johnson, Dexter↗

Vibrational Power Flow Analysis of Rods and Beams

A new method to model vibrational power flow and predict the resulting energy density levels in uniform rods and beams is investigated. This method models the flow of vibrational power in a manner analogous to the flow of thermal power in a heat conduction problem. The classical displacement solutions for harmonically excited, hysteretically damped rods and beams are used to derive expressions for the vibrational power flow and energy density in the rod and beam. Under certain conditions, the power flow in these two structural elements will be shown to be proportional to the energy density gradient. Using the relationship between power flow and energy density, an energy balance on differential control volumes in the rod and beam leads to a Poisson's equation which models the energy density distribution in the rod and beam. Coupling the energy density and power flow solutions for rods and beams is also discussed. It is shown that the resonant behavior of finite structures complicates the coupling of solutions, especially when the excitations are single frequency inputs. Two coupling formulations are discussed, the first based on the receptance method, and the second on the travelling wave approach used in Statistical Energy Analysis. The receptance method is the more computationally intensive but is capable of analyzing single frequency excitation cases. The traveling wave approach gives a good approximation of the frequency average of energy density and power flow in coupled systems, and thus, is an efficient technique for use with broadband frequency excitation.

Wohlever, James Christopher↗

Revisiting two thiophosphate compounds constituting d 0 transition metal HfP 2 S 6 and d 10 transition metal α-Ag 4 P 2 S 6 as multifunctional materials for combining second harmonic generation response and photocurrent response

Two acentric thiophosphate compounds, HfP 2 S 6 and α-Ag 4 P 2 S 6 , are revisited and studied as infrared nonlinear optical materials. HfP 2 S 6 and α-Ag 4 P 2 S 6 were structurally characterized without any property measurements. Here, in this work, HfP 2 S 6 and α-Ag 4 P 2 S 6 were synthesized via high temperature salt flux reactions. Low-temperature polymorph acentric α-Ag 4 P 2 S 6 was purified and grown as mm-sized crystals with the aid of AgBr flux. The AgBr flux was revealed to play an important role in stabilizing the acentric α-Ag 4 P 2 S 6 . The acentric α-Ag 4 P 2 S 6 transforms to centrosymmetric β-Ag 4 P 2 S 6 at 850(5) K, which is revealed by differential scanning calorimetry (DSC) analysis and powder X-ray diffraction experiments. HfP 2 S 6 and α-Ag 4 P 2 S 6 are discovered by UV-vis spectrum measurements as indirect bandgap semiconductors with bandgaps of 2.2(1) eV and 2.5(1) eV, respectively, which is supported by DFT calculations and TB-LMTO-ASA calculations. The bonding pictures of α-Ag 4 P 2 S 6 were studied by crystal orbital Hamilton population calculations (COHP) coupled with electron localization function (ELF) analysis. DFT calculations predict that HfP 2 S 6 and α-Ag 4 P 2 S 6 would exhibit different optical performances regardless of being constructed from identical [P 2 S 6 ] motifs. HfP 2 S 6 exhibits a low second harmonic generation (SHG) response, ~0.21 × AGS (for the sample of particle size of 25 μm). α-Ag 4 P 2 S 6 possesses moderate SHG response, ~0.61 × AGS (for the sample of particle size of 225 μm) coupled with a high laser damage threshold (LDT) of ~3.2 × AGS. Characteristics of high ambient stability, moderate bandgap and SHG response, type-I phase-matching capability, and high LDT together with the easy growth of large crystals make α-Ag 4 P 2 S 6 attractive for future infrared nonlinear optical applications. Photocurrent measurements found that α-Ag 4 P 2 S 6 and β-Ag 4 P 2 S 6 have high photocurrent response, 165 nA cm -2 and 135 nA cm -2 , respectively. α-Ag 4 P 2 S 6 is a new multifunctional material of the ternary Ag–P–S system, which combines nonlinear optical (NLO) properties and photocurrent response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Field Quality and Fabrication Analysis of HQ02 Reconstructed Nb3Sn Coil Cross Sections

© 2017 IEEE. The U.S. LHC Accelerator Research Program (LARP) quadrupole HQ02 was designed and fully tested as part of the low-beta quad development for Hi-Lumi LHC. HQ02's design is well documented with full fabrication accounting along with full field analysis at low and high current. With this history, HQ02 is an excellent test bed for developing a methodology for measuring turn locations from magnet cross sections and comparing with CAD models and measured field. All four coils of HQ02 were cut in identical locations along the magnetic length corresponding to magnetic field measurement and coil metrology. A real-time camera and coordinate measuring equipment was used to plot turn corners. Measurements include systematic and random displacements of winding blocks and individual turns along the magnetic length. The range of cable shifts and the field harmonic range along the length are in agreement, although correlating turn locations and measured harmonics in each cross section is challenging.

Holik, Eddie Frank↗

NERVA dynamic analysis methodology, SPRVIB

The general dynamic computer code called SPRVIB (Spring Vib) developed in support of the NERVA (nuclear engine for rocket vehicle application) program is described. Using normal mode techniques, the program computes kinematical responses of a structure caused by various combinations of harmonic and elliptic forcing functions or base excitations. Provision is made for a graphical type of force or base excitation input to the structure. A description of the required input format and a listing of the program are presented, along with several examples illustrating the use of the program. SPRVIB is written in FORTRAN 4 computer language for use on the CDC 6600 or the IBM 360/75 computers.

Vronay, D. F.↗