Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Model Proposed to Calculate the Exchange Interaction in Ni/Pt Multilayers

The behavior of spin waves is mainly influenced by all parameters that characterize the magnetic material such as exchange interactions, surface and volume anisotropy effects, dipole interactions, and phase transitions and imperfections. In this article, we develop a simple calculation model based on a ferromagnetic anisotropic system that has allowed us to obtain numerical estimates for the Pt exchange interaction and the interlayer coupling force at various Ni/Pt multilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin Wave Resonance Frequency in the Bilayer Ferromagnetic Film

The dependence of spin wave resonance (SWR) frequency on the surface anisotropy, the interlayer and interfacial coupling, the ferromagnetic layer thickness and the external magnetic field in the bilayer ferromagnetic film have been investigated by using the linear spin wave approximation and Green’s function technique. We find that the SWR frequency of the ferromagnetic bilayer films are shifted to higher values corresponding to those of above factors, respectively. The mode of the energetically highest can be controlled by the interfacial coupling, the thickness and the symmetry of the film. The SWR frequency of mode number m = 1 is almost flat except for applied magnetic field. Analytical details and the validity of the method are shown and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties and Electronic Structure of Co/Zr Multilayers

We investigate the magnetic and electronic properties of Co/Zr multilayers with an emphasis on the interfacial effects. The saturation magnetization, coercivity, and uniaxial anisotropy depend significantly on Co thickness. Spin-wave resonance modes were observed, and the change of resonant field as a function of mode number (n) obeys the so-called n{sup 2} law. The interlayer coupling constant was determined. The electronic properties of the interfacial alloys were studied using the WIEN2k code, employing the density functional theory. Calculations describe satisfactorily the observed magnetic behaviour. The influence of pressure on the magnetic properties of the interfacial Co{sub 1−x}Zr{sub x} alloys was investigated in which we demonstrate that the ferromagnetism is altered by pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ground-State Properties for Bilayer Kitaev Model: Dimer Expansion Study

We study ground-state properties in the bilayer Kitaev model by means of the dimer expansion. The existence of parity symmetries in the system reduces the computational cost significantly. This allows us to expand the ground-state energy and interlayer spin-spin correlation up to the 30th order in the interdimer Kitaev coupling. The numerical calculations clarify that the dimer singlet state is indeed realized in the wide parameter region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties and Electronic Structure of Ni/C Multilayer Films

The magnetic properties of Ni/C multilayers were investigated using vibrating sample magnetometer and ferromagnetic resonance (FMR). Spin wave resonances were seen in FMR and the spin wave was found to be sustained through whole layers. The interlayer coupling constant was small pointing out a weak exchange coupling between Ni films through C spacers. The FMR linewidth, in parallel geometry, of the uniform mode decreases with the increase in Ni thickness from 30 to 300 Å which can be understood by considering interfacial effects. The magnetization decreases with decreasing Ni thickness due to the structural imperfections associated with the presence of Ni{sub 1−x}C{sub x} alloys at the interface. Density functional theory (DFT) has been performed to shed light on the decrease in magnetic moment at the interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Blocking Temperature of an Amorphous Alternate A and B Layers Cylindrical Nanowire

The blocking temperature of an amorphous cylindrical nanowire of length L and radius R is studied within the framework of Monte Carlo simulation based on Metropolis algorithm. The nanowire is formed by alternate layers of atoms A and B. The interlayer coupling J{sub AB} is ferromagnetic. The effects of the exchange couplings J{sub B} and J{sub AB}, the plane anisotropy D{sub xy}, and the amorphization α on the blocking temperature of the system are investigated. We found that the blocking temperature increases with increasing the value of the exchange couplings J{sub B} and J{sub AB} and decreases with increasing the plane anisotropy D{sub xy} and the degree of the amorphization α.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Influence of Zn on Superconducting Properties of Bi{sub 2}Sr{sub 2}Ca{sub 1}Cu{sub 2}O{sub X}

It was investigated that the influence of Ca substitution by Zn on the specific resistivity, thermal power, and excess conductivity of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub X}, Bi{sub 2}Sr{sub 2}Ca{sub 0.8}Zn{sub 0.2}Cu{sub 2}O{sub X}, and Bi{sub 2}Sr{sub 2}Ca{sub 0.4}Zn{sub 0.6}Cu{sub 2}O{sub X} polycrystalline samples in the 70–300 K temperature interval. The fluctuation-induced conductivity is analyzed using the Aslamasov and Larkin and Lawrence and Doniach models. The microscopic parameters such as dimensional crossover temperature (T{sub cr}), interlayer coupling strength (J), and zero temperature coherence length along c axis (ξ{sub 0}) are estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generalized Continuum Phenomenological Model of Viscous Fluid: Analysis of Local Mass Displacements

The concept of local mass displacements (as a measure of nonlocality of the state of a physically small element of a body) is used to formulate a complete system of relations of the gradient-type mathematical model of viscous compressible fluid. In this model, the relationship between the thermomechanical processes and the process of local mass displacements, its irreversibility, and the inertia properties are taken into account. It is shown that, in the stationary approximation, the obtained system of relations enables us to justify the appearance of wedging pressure in thin interlayers of fluid.

42 ENGINEERING↗

Fabrication and physicochemical characterization of graphene oxide derived from thermally expanded graphite

Graphene oxide was obtained from expanded graphite according to the modified Hummers method. The reaction time was significantly reduced (from 24 to 8 h) by applying the expanded graphite in the oxidation process. The interlayer distance in obtained samples was equal to 0.70–0.74 nm. Structural features of the material were studied by the powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, XPS spectroscopy, and NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Morphological Features of TiNi-Based Powder Manufactured by the Method of Hybrid-Calcium Reduction

An investigation of the structural features and surface morphology of a PV-N55T45 TiNi-based powder manufactured by the method of hybrid-calcium reduction is performed. The TiNi intermetallic compound is found in a two-phase state – B2 and В19′, and the following secondary phases are revealed: Ti{sub 2}Ni, Ti{sub 4}Ni{sub 2}(О, N, С), TiNi{sub 3}, and Ti{sub 3}Ni{sub 4}. It is observed that TiNi-based powder has dual – compact and spongy – morphology. The compact powder particles consist of oval coarse grains of TiNi separated by a massive Ti{sub 2}Ni interlayer. In the spongy particles, in contrast to the compact ones, the TiNi-phase prevails in the form of a single conglomerate of fine grains measuring 10–20 μm. In the Ni-enriched regions of the TiNi matrix the B19′-martensite is observed in multiple structural-morphological variants. In the compact particles the martensite structure represents orthogonal twin plates having different orientations within one grain. In the spongy particles, there is a different type of the martensite structure with multiple crystals of the B19′-martensite with the pyramidal lath morphology. On the surface of certain particles there is terraced relief formed due to bulk diffusion of atoms, surface diffusion of adatoms, and their interaction with the substrate defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemo-Mechanics of α-V 2 O 5 During Lithiation and Implications for Rechargeable Battery Cathodes

Chemo-mechanical degradation of layered oxide electrodes is strongly influenced by crystallographic anisotropy, local stress evolution, and ion insertion, yet the intrinsic mechanical response of layered materials remains incompletely understood. Indeed, most prior studies have focused on polycrystalline materials but single crystals enable direct observation of coupling between anisotropic ion diffusion and mechanical response. This study aims to determine how crystallographic anisotropy and lithiation affect deformation, fracture, and mechanical properties in single-crystal V 2 O 5 , and compares this behavior with polycrystalline counterparts. Polycrystalline V 2 O 5 thin films and single-crystal α-V 2 O 5 were studied using nanoindentation, scanning electron microscopy, focused ion beam cross-sectioning, and Raman spectroscopy. Single crystals were tested in pristine and chemically lithiated states, including experiments in which crystals were first plastically deformed via nanoindentation and subsequently lithiated. Polycrystalline films exhibited significantly higher hardness and elastic modulus than single crystals. Single crystals indented normal to the exposed (001) basal plane exhibited pronounced anisotropic deformation, including directional slip, crystallographically-guided cracking, anisotropic crack propagation, interlayer separation, and shear localization. Lithiation caused substantial softening, reduced hardness and modulus, and suppressed displacement bursts during nanoindentation, while previously indented regions showed crack formation and growth upon lithiation. Mechanical behavior of α-V 2 O 5 is strongly governed by crystallographic anisotropy and further altered by lithiation, with pre-existing deformation serving as a strong driver of fracture during ion insertion. These findings illuminate the coupling among ion insertion, deformation, and fracture in layered oxides and provide a basis for understanding and mitigating mechanical failure in electrochemical energy-storage materials.

Anisotropy↗

Analysis of Brazing Effect on Hot Corrosion Behavior of a Nickel-Based Aerospace Superalloy

The effects of brazing and use of composite powder mixture as interlayer material on hot corrosion resistance of brazed IN738 superalloy were studied. Brazing was observed to result in significant reduction in the hot corrosion resistance of the superalloy. However, application of composite powder mixture, which consists of additive superalloy powder, enhanced the hot corrosion resistance of brazed samples. It is also found that although the use of composite powder mixture increased hot corrosion resistance of brazed alloy, if the additive powder completely melts, which is possible during brazing, it can significantly reduce the hot corrosion resistance of the brazed joint. Elemental micro-segregation during solidification of the joint with completely melted powder mixture produces chromium-depleted zones and consequently reduces hot corrosion resistance, since a uniform distribution and adequate chromium concentration are necessary to combat hot corrosion. This has not been previously reported in the literature and it is crucial to the use of composite powder mixture for enhancing the properties of brazed superalloys.

36 MATERIALS SCIENCE↗

Microstructure and Properties of the Al-27Si/Cu/Al-50Si Joint Brazed by the Partial Transient Liquid Phase Bonding

Al-27Si and Al-50Si were brazed by using a thin Cu interlayer. The metallurgical bonding without obvious defects is achieved, and a wide brazing seam consisting of fine eutectic structures and coarse Si particles is formed in the Al-27Si/Cu/Al-50Si joint. The deposition of Si element in the liquid phases during solidification results in the formation of the larger Si particles and ultra-small Si particles in the brazing seam. The shear strength of the joint reaches 63 MPa.

36 MATERIALS SCIENCE↗

Role of Surface Termination in the Structural and Electronic Properties of Sc$_2$CT$_\textrm{x}$ MXene

Graphene-like layered transition metal carbides, nitrides, or carbonitrides, called MXenes, obey the stoichiometric formula of M n+1 X n T x , where M is an early transition metal such as scandium (Sc), n is a natural number, X is C, N, or CN, and T x is a functional group such as –O, –F, or –OH that passivates the surface of the MXene. The electronic structure of bare Sc 2 C and functionalized Sc 2 CT x MXenes are explored by performing first-principles density functional theory (DFT) calculations. The bare Sc 2 C is metallic, but less stable than its passivated structure. The Sc 2 C MXene has an interlayer 2D electron gas not bound to Sc or C atoms but free to move, making it an electride. DFT calculations show that functionalization can open an energy gap in Sc 2 CT x MXenes. The size and type (direct versus indirect) of the bandgap vary with the functional groups, which provides a means for opening and tuning of the band gap.

DFT↗

Improving Joint Formation and Tensile Properties of Dissimilar Friction Stir Welding of Aluminum and Magnesium Alloys by Solving the Pin Adhesion Problem

Friction stir welding (FSW), as a solid-state welding technology invented by TWI in 1991, has potential to join dissimilar Al/Mg alloys. In this study, the pin adhesion phenomenon affecting joint quality during FSW of 6061-T6 aluminum and AZ31B magnesium alloys was investigated. The adhesion phenomenon induced by higher heat input easily transformed the tapered-and-screwed pin into a tapered pin, which greatly reduced the tool’s ability to drive the plasticized materials and further deteriorated joint formation. Under the condition without the pin adhesion, the complex intercalated interlayer at the bottom of stir zone was beneficial to mechanical interlocking of Al/Mg alloys, improving tensile properties. However, the formation of intermetallic compounds was still the main reason of the joint fracture, significantly deteriorating tensile properties. Under the welding speed of 60 mm/min without the pin adhesion phenomenon, the maximum tensile strength of 107 MPa and elongation of 1.2% were achieved.

36 MATERIALS SCIENCE↗

Microstructural Characteristics and Mechanical Properties of an Electron Beam-Welded Ti/Cu/Ni Joint

Electron beam welding experiments of TA15 titanium alloy to GH600 nickel superalloy with and without a copper sheet interlayer were carried out. Surface appearance, microstructure and phase constitution of the joint were examined by optical microscopy, scanning electron microscopy and x-ray diffraction analysis. Mechanical properties of Ti/Ni and Ti/Cu/Ni joint were evaluated based on tensile strength and microhardness tests. The results showed that cracking occurred in Ti/Ni electron beam weldment for the formation of brittle Ni-Ti intermetallics, while a crack-free electron beam-welded Ti/Ni joint can be obtained by using a copper sheet as filler metal. The addition of copper into the weld affected the welding metallurgical process of the electron beam-welded Ti/Ni joint significantly and was helpful for restraining the formation of Ti-Ni intermetallics in Ti/Ni joint. The microstructure of the weld was mainly characterized by a copper-based solid solution and Ti-Cu interfacial intermetallic compounds. Ti-Ni intermetallic compounds were almost entirely suppressed. The hardness of the weld zone was significantly lower than that of Ti/Ni joint, and the tensile strength of the joint can be up to 282 MPa.

36 MATERIALS SCIENCE↗

Fabrication of Ta-Reinforced Cu-Based Bulk Metallic Glass Composites by High-Pressure Torsion

Ex situ Cu{sub 54}Zr{sub 22}Ti{sub 18}Ni{sub 6} matrix bulk metallic glass composites (BMGCs) reinforced with Ta particles (10–30 vol.%) were fabricated by high-pressure torsion (HPT) under applied pressure of 6 GPa for 1–3 turns at temperatures of 25 or 200 °C. The densification, structure, thermal, and mechanical properties of BMGC samples were investigated by Archimedes densitometry, optical microscopy, x-ray diffraction, differential scanning calorimetry, small punch test, and microhardness measurements. Near full-density BMGC disks (relative densities higher than 0.97) are fabricated using HPT, irrespective of the processing strain and temperature. The microhardness of BMGCs is improved by increasing the number of turns, or the processing temperature due to the improvement in the deformation degree of both the amorphous and Ta particles as well as the reduction in the interlayer spacing of Ta particles. Nevertheless, there is an optimal amount of Ta which gives rise to the peak hardness in the BMGC samples, depending on the amount of imposed strain during HPT. The results of small punch test indicate that the addition of Ta to the monolithic BMG and increasing the HPT temperature significantly enhance the fracture load and deflection.

36 MATERIALS SCIENCE↗

Microstructure and Ratcheting Behavior of Additive Manufactured 4043 Aluminum Alloy

In this paper, 4043 aluminum alloy was printed using additive manufacturing (AM) with robot cold metal transfer (CMT) technology. The microstructure and mechanical properties of different parts, including the bottom, middle and upper portions of the printed AM 4043 aluminum alloy, were analyzed. Ratcheting tests were performed using an asymmetric load, and the tensile properties of the pre-ratcheting and un-ratcheted specimens were tested. The results indicate that the dendrites in the middle region are larger than those at the top and bottom regions and that the coarse microstructure associated with the interlayer junction resulted in the decline of the mechanical properties. The tensile strength of the AM specimens is 165 MPa, and the yield strength is 50 MPa. The printed 4043 aluminum alloy exhibits mechanical properties similar to those for conventional cast and welded aluminum alloys. The ratcheting behavior indicates that an increase in the mean stress or stress amplitude leads to an increase in the ratcheting strain, and the accumulation of ratcheting strain causes plastic damage to the materials. Pre-ratcheting behavior causes the tensile and yield strengths to increase compared to the behavior of the un-ratcheted specimens.

36 MATERIALS SCIENCE↗