Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

CHANDRA OBSERVATIONS OF NGC 4342, AN OPTICALLY FAINT, X-RAY GAS-RICH EARLY-TYPE GALAXY

Chandra x-ray observations of NGC 4342, a low-stellar mass (M{sub K} = -22.79 mag) early-type galaxy, show luminous, diffuse x-ray emission originating from hot gas with temperature of kT {approx} 0.6 keV. The observed 0.5-2 keV band luminosity of the diffuse x-ray emission within the D{sub 25} ellipse is L{sub 0.5-2keV} = 2.7 Multiplication-Sign 10{sup 39} erg s{sup -1}. The hot gas has a significantly broader distribution than the stellar light, and shows strong hydrodynamic disturbances with a sharp surface brightness edge to the northeast and a trailing tail. We identify the edge as a cold front and conclude that the distorted morphology of the hot gas is produced by ram pressure as NGC 4342 moves through external gas. From the thermal pressure ratios inside and outside the cold front, we estimate the velocity of NGC 4342 and find that it moves supersonically (M {approx} 2.6) toward the northeast. Outside the optical extent of the galaxy, we detect {approx}17 bright (L{sub 0.5-8keV} > or approx. 3 x 10{sup 37} erg s{sup -1}) excess x-ray point sources. The excess sources are presumably LMXBs located in metal-poor globular clusters (GCs) in the extended dark matter halo of NGC 4342. Based on the number of excess sources and the average frequency of bright LMXBs in GCs, we estimate that NGC 4342 may host roughly 850-1700 GCs. In good agreement with this, optical observations hint that NGC 4342 may harbor 1200 {+-} 500 GCs. This number corresponds to a GC specific frequency of S{sub N} = 19.9 {+-} 8.3, which is among the largest values observed in full-size galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

CONSISTENT SCALING LAWS IN ANELASTIC SPHERICAL SHELL DYNAMOS

Numerical dynamo models always employ parameter values that differ by orders of magnitude from the values expected in natural objects. However, such models have been successful in qualitatively reproducing properties of planetary and stellar dynamos. This qualitative agreement fuels the idea that both numerical models and astrophysical objects may operate in the same asymptotic regime of dynamics. This can be tested by exploring the scaling behavior of the models. For convection-driven incompressible spherical shell dynamos with constant material properties, scaling laws had been established previously that relate flow velocity and magnetic field strength to the available power. Here we analyze 273 direct numerical simulations using the anelastic approximation, involving also cases with radius-dependent magnetic, thermal, and viscous diffusivities. These better represent conditions in gas giant planets and low-mass stars compared to Boussinesq models. Our study provides strong support for the hypothesis that both mean velocity and mean magnetic field strength scale as a function of the power generated by buoyancy forces in the same way for a wide range of conditions.

79 ASTRONOMY AND ASTROPHYSICS↗

DIFFUSIVE SHOCK ACCELERATION OF HIGH-ENERGY CHARGED PARTICLES AT FAST INTERPLANETARY SHOCKS: A PARAMETER SURVEY

We present results from numerical simulations of the acceleration of solar energetic particles (SEPs) associated with strong, fast, and radially propagating interplanetary shocks. We focus on the phase of the SEP event at the time of the shock passage at 1 AU, which is when the peak intensity at energies below a few MeV is the highest. The shocks in our study start between 2 and 10 solar radii and propagate beyond 1 AU. We study the effect of various shock and particle input parameters, such as the spatial diffusion coefficient, shock speed, solar wind speed, initial location of the shock, and shock deceleration rate, on the total integrated differential intensity, I, of SEPs with kinetic energies > 10 MeV. I is the integral over energy of the differential intensity spectrum at the time of the shock passage at 1 AU. We find that relatively small changes in the parameters can lead to significant event-to-event changes in I. For example, a factor of 2 increase in the diffusion coefficient at a given energy and spatial location, can lead to a decrease in I by as much as a factor of 50. This may help explain why there are fewer large SEP events seen during the current solar maximum compared to previous maxima. It is known that the magnitude of the interplanetary magnetic field is noticeably weaker this solar cycle than it was in the previous cycle and this will naturally lead to a somewhat larger diffusion coefficient of SEPs.

79 ASTRONOMY AND ASTROPHYSICS↗

Constraints on dark matter annihilations from diffuse gamma-ray emission in the Galaxy

Recent advances in γ-ray cosmic ray, infrared and radio astronomy have allowed us to develop a significantly better understanding of the galactic medium properties in the last few years. In this work using the DRAGON code, that numerically solves the CR propagation equation and calculating γ-ray emissivities in a 2-dimensional grid enclosing the Galaxy, we study in a self consistent manner models for the galactic diffuse γ-ray emission. Our models are cross-checked to both the available CR and γ-ray data. We address the extend to which dark matter annihilations in the Galaxy can contribute to the diffuse γ-ray flux towards different directions on the sky. Moreover we discuss the impact that astrophysical uncertainties of non DM nature, have on the derived γ-ray limits. Such uncertainties are related to the diffusion properties on the Galaxy, the interstellar gas and the interstellar radiation field energy densities. Light ∼ 10 GeV dark matter annihilating dominantly to hadrons is more strongly constrained by γ-ray observations towards the inner parts of the Galaxy and influenced the most by assumptions of the gas distribution; while TeV scale DM annihilating dominantly to leptons has its tightest constraints from observations towards the galactic center avoiding the galactic disk plane, with the main astrophysical uncertainty being the radiation field energy density. In addition, we present a method of deriving constraints on the dark matter distribution profile from the diffuse γ-ray spectra. These results critically depend on the assumed mass of the dark matter particles and the type of its end annihilation products.

79 ASTRONOMY AND ASTROPHYSICS↗

Scalar flux transport models for self-similar turbulent mixing

A common approach to closing turbulent species flux in multicomponent Reynolds-averaged Navier-Stokes models is to use the standard gradient diffusion approximation. While such an approach has been shown to work well when applied to many canonical turbulent mixing configurations, a gradient diffusion approach is fundamentally limited in its ability to capture complex phenomena such as countergradient transport. For this reason, complicated mixing applications may benefit by treating the turbulent diffusivity with a model transport equation in a manner analogous to second-moment momentum closure in Reynolds-stress transport models. Here, the present work explores the development and application of two different scalar flux transport (SFT) models. Self-similarity constraints are derived for these models, and they are evaluated against gradient-diffusion-based models in several one- and two-dimensional problems of turbulent mixing. It is found that the new SFT models out-perform gradient diffusion models in problems involving rapid acceleration reversal and in problems involving anisotropic transport of materials. In addition, it is found that even a hybrid-SFT approach, in which an SFT equation is utilized along with a gradient diffusion closure, provides some measure of improvement over models that transport the mass flux rather than the scalar flux.

Reynolds-averaged Navier Stokes↗

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst

Abstract This study has developed a two-dimensional, two-phase transport model to investigate the transport characteristics in direct methanol fuel cells (DMFCs) using platinum group metal (PGM)-free cathode catalysts. The model considered anisotropic properties of the gas diffusion layer (GDL) caused by current collector’s mechanical compression, the interfacial mass transfer of water and methanol between liquid and vapor, and unique properties of the cathode PGM-free catalyst layer. Results showed that the liquid methanol solution from the anode could provide sufficient water to hydrate the proton exchange membrane (PEM), and the relative humidity of the cathode air did not impact the membrane hydration. Fully hydrating the cathode air may deteriorate the fuel cell performance, especially when the operating temperature is close to 100 °C because the exponential increase of the saturated water pressure with temperature decreased the partial pressure of oxygen. The optimized operating temperature increased with the increase of air pressure and was about 80 °C at 1.5 atm cathode pressure. To achieve the US Department of Energy’s performance target of 300 mW/cm2 peak power density, catalytic activities of both the anode and cathode catalysts need to be improved by one order of magnitude compared with the state-of-the-art commercial catalysts.

Electrochemistry↗

Plasma kinetics of Ar/O{sub 2} magnetron discharge by two-dimensional multifluid modeling

Multifluid two-dimensional model was developed to describe the plasma kinetics of the direct current Ar/O{sub 2} magnetron, coupling two modules: charged particles and neutrals. The first module deals with three positive ions - Ar{sup +}, O{sub 2}{sup +}, and O{sup +} - and two negative species - e{sup -} and O{sup -} - treated by the moments of Boltzmann's equation. The second one follows seven neutral species (Ar, O{sub 2}, O, O{sub 3}, and related metastables) by the multicomponent diffusion technique. The two modules are self-consistently coupled by the mass conservation and kinetic coefficients taking into account more than 100 volume reactions. The steady state is obtained when the overall convergence is achieved. Calculations for 10%O{sub 2} in Ar/O{sub 2} mixture at 2.67 and 4 Pa show that the oxygen excited species are mainly created by electron collisions in the negative glow of the discharge. Decreasing the pressure down to 0.67 Pa, the model reveals the nonlocal behavior of the reactive species. The density gradient of O{sub 2} ground state is reversed with respect to all gradients of the other reactive species, since the latter ones originate from the molecular ground state of oxygen. It is also found that the wall reactions drastically modify the space gradient of neutral reactive species, at least as much as the pressure, even if the discharge operates in compound mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of vapor diffusion Nb$^{3}$Sn coating at Fermilab: Minimizing impurities using TOF-SIMS

Nb₃Sn demonstrates steady advancements nowadays offering reduced power cost in superconducting radio-frequency cavities due to its high critical temperature, quality factor, and achieved accelerating gradient. However, theoretical estimates of its radio-frequency parameters have not been achieved due to several potentially limiting mechanisms: tin spots, patchy regions, defects, thermal impedance, and impurities. While some of these limitations have been intensively studied, impurity analysis in Nb$_3$Sn coatings have received less attention. We report an investigation of impurities in several vapor-diffused Nb₃Sn coated samples using time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and show allowable impurity levels in view of superconducting cavity performance. Challenges and lessons learned in maintaining clean Nb$_3$Sn coatings are also discussed.

Tagdulang, Nikki [Fermilab]↗

Thermospheric wind effects on the global distribution of helium in the earth's upper atmosphere

The momentum and continuity equations for a minor gas are combined with the momentum equation for the major constituents to obtain the time dependent continuity equation for the minor species reflecting a wind field in the background gas. This equation is used to study the distributions of helium and argon at times of low, medium, and high solar activity for a variety of latitudinal-seasonal wind cells. For helium, the exospheric return flow at the higher thermospheric temperatures dominates the distribution to the extent that much larger latitudinal gradients can be maintained during periods of low solar activity than during periods of high activity. By comparison to the exospheric flow, the smoothing effect of horizontal diffusion is almost negligible. The latitudinal variation of helium observed by satellite mass spectrometers can be reproduced by the effect of a wind system of air rising in the summer hemisphere, flowing across the equator with speeds on the order of 100 to 200 m/sec, and descending in the winter hemisphere. Argon, being heavier than the mean mass in the lower thermosphere, reacts oppositely to helium in that it is enhanced in the summer hemisphere and depleted in the winter.

Reber, C. A.↗

Theoretical and experimental investigation of 'grating' type photovoltaic cells

The fabrication procedure and properties of 'grating' cells made by forming a fine grating pattern of aluminum alloyed into n-silicon wafers are described. The finest grating lines achieved in the cells described were 5 microns; the smallest spacing was about 15 microns. The best temperature for alloying was found to be about 600 C, a bit above the Si-Al eutectic temperature (576 C). The short-circuit current obtained from the best of these cells exposed to 100 mW/sq cm of (simulated air mass zero) illumination was at least equal to that obtained from conventional diffused cells, but their open-circuit voltage was lower. Their quantum yield was strongly blue-shifted; it was flat from 4000 to 8500 A.

Loferski, J. J.↗

Boundary layer bleed system study for a full-scale, mixed-compression inlet with 45 percent internal contraction

The results of an experimental bleed development study for a full-scale, Mach 2.5, axisymmetric, mixed-compression inlet were presented. The inlet was designed to satisfy the airflow requirements of the TF30-P-3 turbofan engine. Capabilities for porous bleed on the cowl surface and ram-scoop/flush-slot bleed on the centerbody were provided. A configuration with no bleed on the cowl achieved a minimum stable, diffuser exit, total pressure recovery of 0.894 with a centerbody-bleed mass flow ratio of 0.02. Configurations with cowl bleed had minimum stable recoveries as high as 0.900 but suffered range decrement penalties from the increased bleed mass flow removal. Limited inlet stability and unstart angle-of-attack data are presented.

Shaw, R. J.↗

Experimental performance of a 16.10-centimeter-tip-diameter sweptback centrifugal compressor designed for a 6:1 pressure ratio

A backswept impeller with design mass flow rate of 1.033 kg/sec was tested with both a vaned diffuser and a vaneless diffuser to establish stage and impeller characteristics. Design stage pressure ratio of 5.9:1 was attained at a flow slightly lower than the design value. Flow range at design speed was 6 percent of choking flow. Impeller axial tip clearance at design speed was varied to determine effect on stage and impeller performance.

Klassen, H. A.↗

The settling of helium and the ages of globular clusters

Model low-mass globular-cluster stars were evolved with their helium allowed to diffuse under the influence of gravity, thermal diffusion, and concentration gradient. The evolution tended to speed up. Also, the turnoff point moved toward lower luminosity and slightly lower surface temperature. If the luminosity at turnoff is used as the sole criterion for determining the age of a globular cluster, the inferred ages of such clusters are reduced by about 22% from starting values in the vicinity of 15 billion years.

Noerdlinger, P. D.↗

Vertical transport and photochemistry in the terrestrial mesosphere and lower thermosphere /50-120 km/

A study is conducted of the coupled effects of kinetics, solar cycle flux variations, and vertical transport on the distribution of long-lived hydrogen-carbon-oxygen compounds in the terrestrial mesosphere and lower thermosphere, using a one-dimensional aeronomy model. The calculations account for the important chemical reactions and use rocket measurements of the solar flux at solar minimum and maximum. Photodissociation rates appropriate for the mesosphere are determined with a spherical shell atmosphere formalism. Detailed corrections for the O2 Schumann-Runge bands and the temperature dependence of the CO2 cross sections are used. An eddy diffusion profile is derived which is in agreement with the Aladdin 74 mass spectral measurements of atomic O, O2, CO2, and Ar in the lower thermosphere and observations of the O3 minimum at about 80 km.

Allen, M.↗

Models of the formation of the solar nebula

Protostellar cloud collapse and solar nebula formation models indicate that the size of the nebula produced will be larger in terms of both gas centrifugal balance R(CF) and collapse time diffusion length R(V). From this, it can be deduced that low mass nebulas are produced if (R(V)/R(CF))-squared is much greater than unity, while nebulas result for values lower than approximately unity. The total angular momentum value distinguishes most current models of the solar nebula. Analytic expressions for the surface density, nebular mass flux and photospheric temperature distributions during the formation stage are presented for simple modes illustrating and general properties of growing protostellar disks.

Cassen, P.↗

Modelling of Laser-Enhanced Chemical Vapor Deposition

Research is directed at development of a detailed model of mass and heat transfer and chemical reaction in the pyrolysis of silane for the growth of thin amorphous silicon substrates incorporating laser heating of the gas phase above the film. The model will be the basis for evaluation of the relative importances of the decomposition of SiH4 in the vapor phase, mass transfer of the intermediate species, e.g., SiH2, and the evolution of hydrogen gas. Plans are also underway for developing a model for homogeneous nucleation of Si in the vapor phase to model the rate limitations observed at high gas-phase temperatures and high partial pressures of silane. Work was concentrated on an almost one-dimensional model for the coupling of the CO2 laser beam for heat transfer of the vapor phase with simple kinetic models for SiH4 decomposition and subsequent absorption of Si vapor on the substrate. Mass transfer in the vapor phase is assumed to be solely by diffusion. The role of convection in the vapor phase caused by the large changes in density in and around the center of the laser beam will be analyzed to evaluate the potential of microgravity experiments for increasing the uniformity of the film and the deposition rate.

Brown, R. A.↗

The O2(+) vibrational distribution in the Venusian ionosphere

The vibrational distribution of O2(+) in the ionosphere of Venus was calculated for a model atmosphere (similar to one discribed by Fox, 1982), based on data from the Pioneer Venus neutral mass spectrometer. The calculation of the ion densities includes both chemistry and diffusion. At 100 km, quenching precludes survival of vibrationally excited 02(+). At the exobase, near 200 km, more than half of O2(+) molecules are vibrationally excited. The effects of vibrationally excited O2(+) on the hot oxygen coronas and the airglow are discussed.

Fox, J. L.↗

Refractory amorphous metallic (W/0.6/ Re/0.4/)76B24 coatings on steel substrates

Refractory metallic coatings of (W/0.6/ Re/0.4/)76B24 (WReB) have been deposited onto glass, quartz, and heat-treated AISI 52100 bearing steel substrates by dc magnetron sputtering. As-deposited WReB films are amorphous, as shown by their diffuse X-ray diffraction patterns; chemically homogeneous, according to secondary ion mass spectrometry (SIMS) analysis; and they exhibit a very high (approximately 1000 C) crystallization temperature. Adhesion strength of these coatings on heat-treated AISI 52100 steel is in excess of approximately 20,000 psi and they possess high microhardness (approximately 2400 HV50). Unlubricated wear resistance of such hard and adherent amorphous metallic coatings on AISI 52100 steel is studied using the pin-on-disc method under various loading conditions. Amorphous metallic WReB coatings, about 4 microns thick, exhibit an improvement of more than two and a half orders of magnitude in the unlubricated wear resistance over that of the uncoated AISI 52100 steel.

Thakoor, A. P.↗