Search NASA⌕ Search

SEARCH · Search NASA

Results for “multifunctional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Quasi-single-crystal (001) SrTiO{sub 3} templates on Si

The integration of multifunctional oxides on semiconductor devices requires the formation of single-crystal-like oxide templates directly on silicon. We report the fabrication of quasi-single-crystal (001) SrTiO{sub 3} templates on (001) Si by annealing 100 nm thick molecular beam epitaxy-grown epitaxial SrTiO{sub 3} films at 900 deg. C. The full width at half maximum of the (002) rocking curve is 0.006 deg., which is much narrower than SrTiO{sub 3} bulk single crystals. An atomically smooth TiO{sub 2}-terminated surface is obtained by buffered-HF etching, which allows us to create functional oxide heterointerfaces on Si. Epitaxial SrRuO{sub 3} thin films grown on the quasi-single-crystal SrTiO{sub 3} template exhibit a superior crystalline quality and surface morphology.

36 MATERIALS SCIENCE↗

Control system for the Spallation Neutron Source H{sup -} source test facility Allison scanner

Spallation Neutron Source is currently in progress of a multiyear plan to ramp ion beam power to the initial design power of 1.4 MW. Key to reaching this goal is understanding and improving the operation of the H{sup -} ion source. An Allison scanner was installed on the ion source in the test facility to support this improvement. This paper will discuss the hardware and the software control system of the installed Allison scanner. The hardware for the system consists of several parts. The heart of the system is the scanner head, complete with associated bias plates, slits, and signal detector. There are two analog controlled high voltage power supplies to bias the plates in the head, and a motor with associated controller to position the head in the beam. A multifunction data acquisition card reads the signals from the signal detector, as well as supplies the analog voltage control for the power supplies. To synchronize data acquisition with the source, the same timing signal that is used to trigger the source itself is used to trigger data acquisition. Finally, there is an industrial personal computer to control the rest of the hardware. Control software was developed using National Instruments LABVIEW, and consists of two parts: a data acquisition program to control the hardware and a stand alone application for offline user data analysis.

43 PARTICLE ACCELERATORS↗

An approach in developing 3D fiber-deposited magnetic scaffolds for tissue engineering

Scaffolds should possess suitable properties to play their specific role. In this work, the potential of 3D fiber deposition technique to develop multifunctional and well-defined magnetic poly(epsilon-caprolactone)/iron oxide scaffolds has been highlighted, and the effect of iron oxide nanoparticles on the biological and mechanical performances has been assessed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of crystal phase and transparent substrates on electro-optic properties of lead zirconate titanate films

Pb(Zr{sub x}Ti{sub 1-x})O{sub 3}[x=0.52, PZT(52) near morphotropic phase boundary], tetragonal PZT(65), and rhombohedral PZT(20) thin films have been fabricated on different transparent substrates by radio frequency sputtering. The optical studies show that the band gap energies and refractive indices of the PZT thin films are crystal phase dependent. The largest electro-optic (EO) coefficient of 219.6 pm/V has been achieved by controlling the crystal phase of the PZT thin films. The linear EO coefficients of PZT(52) films on the (Pb{sub 0.86}La{sub 0.14})TiO{sub 3}-coated glass, indium tin oxides, and MgO substrates are also studied. Such study could contribute to the crystal phase and substrate dependent PZT films for electro-optic devices and multifunctional integrated circuits.

36 MATERIALS SCIENCE↗

Ion Beams: A Powerful Tool for Making New Functional Materials

It is well known that ion beams play an important role in semiconductor industry, which utilizes ion implantation and irradiation for materials modification. Ion sputtering technique is used to fabricate multifunctional coatings and multilayers. Using ion implantation, there is a continued effort for fabrication of quantum bit structures for future quantum computers. Availability of focused ion beams (FIBs) has widened the applications of ion beams and nanostructured functional materials are being fabricated using FIBs. Various quantum structures can be fabricated using FIB. Ferromagnetism can either be induced or destroyed in special layered structures using ion irradiation. The magnetic exchange bias phenomenon is of tremendous utility in magnetic recording. Issues of lateral diffusion in nanoscale doping of semiconductors by FIB and an example of exchange bias enhancement by ion irradiation are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoelectric coupling study in multiferroic Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3} ceramics through small and large electric signal standard measurements

Multifunctional multiferroic materials such as the single phase compound Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3} (PFN), where ferroelectric and antiferromagnetic order coexist, are very promising and have great interest from the academic and technological points of view. In this work, coupling of the ferroelectric and magnetic moments is reported. For this study, a combination of the small signal response using the impedance spectroscopy technique and the electromechanical resonance method with the large signal response through standard ferroelectric hysteresis measurement, has been used with and without an applied magnetic field. The measurements to determine the electrical properties of the ceramic were performed as functions of the bias and poling electric fields. A simultaneous analysis of the complex dielectric constant {epsilon}-tilde, impedance Z-tilde, electric modulus M-tilde, admittance Y-tilde, and the electromechanical parameters and coupling factors is presented. The results are correlated with a previous study of structural, morphological, small signal dielectric frequency-temperature response, and the ferroelectric hysteretic, magnetic and magnetodielectric behaviors. The observed shifts of the resonance and antiresonance frequency values can be associated with change of the ferroelectric domain size favored by the readjustment of the oxygen octahedron when the magnetic field is applied. From P-E hysteresis loops obtained without and with an external applied magnetic field, a dc magnetoelectric coupling effect with maximum value of 4 kV/cm T (400 mV/cm Oe) was obtained.

36 MATERIALS SCIENCE↗

Mesh-shape-and-size controlled rapid-melting growth for the formation of single-crystalline (100), (110), and (111) Ge networks on insulators

Single-crystalline-Ge (c-Ge) networks with various crystal orientations on insulators formed on Si substrates are essential for integrating high-speed and multifunctional devices onto the Si platform. c-Ge networks are realized by rapid-melting growth of mesh-patterned amorphous-Ge over large areas (500x250 {mu}m{sup 2}) on (110) and (111) as well as (100) Si substrates by optimizing the shape and the size of the mesh. It is revealed that latent-heat generated at the growth front can be controlled by selecting mesh-shape-and-size, which suppresses the spontaneous nucleation. In addition, essential role of the growth-direction on preventing the rotational growth is clarified.

36 MATERIALS SCIENCE↗

Highly Emissive Transition Metal Ion Doped Semiconducting Nanocrystals

Doped semiconductor nanocrystals (d-dots), specifically ones not containing heavy metal ions, have the potential to become a class of mainstream emissive materials. Mn- and Cu-doped ZnSe or ZnS d-dots can cover an emission window similar to that of the current workhorse of intrinsic quantum dot (q-dots) emitters, CdSe nanocrystals. We synthesized high quality stable Cu doped ZnSe in nonpolar as well as polar solvent. The emission intensity of these doped nanocrystals is found stable for months under UV irradiation, after different multifunctional ligand which is important for any biological detection. We have also synthesized the stable Mn doped ZnS in nonpolar solvent more than 50% QY.. The doped nanocrystals are characterized by TEM, XRD, EPR and ICP analysis.

36 MATERIALS SCIENCE↗

Efficiently recyclable magnetic core-shell photocatalyst for photocatalytic oxidation of chlorophenol in water

Multifunctional Fe{sub 3}O{sub 4}-TiO{sub 2} core-shell submicron particles were fabricated by a simple surface modification process that induces the magnetic submicron particles to be coated with a TiO{sub 2} shell. As characterized by field emission scanning electron microscopy, (FESEM), the as-synthesized Fe{sub 3}O{sub 4}-TiO{sub 2} particles exhibit a narrow size distribution with a typical size of 248 {+-} 19 nm and 8 nm in shell thickness. Magnetic measurement indicates that the as-synthesized Fe{sub 3}O{sub 4}-TiO{sub 2} core-shell particles are superparamagnetic at room temperature. Photocatalytic experiment is demonstrated by utilizing the oxidation reaction of 2,4,6-trichlorophenol (2,4,6-TCP) with the photofunctional magnetic nanoparticles.

36 MATERIALS SCIENCE↗

Bright upconversion luminescence and increased Tc in CaBi{sub 2}Ta{sub 2}O{sub 9}:Er high temperature piezoelectric ceramics

Er{sup 3+} doped CaBi{sub 2}Ta{sub 2}O{sub 9} (CBT) bismuth layered-structure high temperature piezoelectric ceramics were synthesized by the traditional solid state method. The upconversion (UC) emission properties of Er{sup 3+} doped CBT ceramics were investigated as a function of Er{sup 3+} concentration and incident pump power. A bright green upconverted emission was obtained under excitation 980 nm at room temperature. The observed strong green and weak red emission bands corresponded to the transitions from {sup 4}S{sub 3/2} and {sup 4}F{sub 9/2} to {sup 4}I{sub 15/2}, respectively. The dependence of UC emission intensity on pumping power indicated that a three-photon process was involved in UC emissions. Studies of dielectric with temperature have also been carried out. Introduction of Er increased the Curie temperature of CBT, thus, making this ceramic suitable for sensor applications at higher temperatures. Because of its strong up-converted emission and increased Tc, the multifunctional high temperature piezoelectric ceramic may be useful in high temperature sensor, fluorescence thermometry, and optical-electro integration applications.

36 MATERIALS SCIENCE↗

Upconversion luminescence, ferroelectrics and piezoelectrics of Er Doped SrBi{sub 4}Ti{sub 4}O{sub 15}

Er{sup 3+} doped SrBi{sub 4}Ti{sub 4}O{sub 15} (SBT) bismuth layered-structure ferroelectric ceramics were synthesized by the traditional solid-state method, and their upconversion photoluminescent (UC) properties were investigated as a function of Er{sup 3+} concentration and incident pump power. Green (555 nm) and red (670 nm) emission bands were obtained under 980 nm excitation at room temperature, which corresponded to the radiative transitions from {sup 4}S{sub 3/2}, and {sup 4}F{sub 9/2} to {sup 4}I{sub 15/2}, respectively. The emission color of the samples could be changed with moderating the doping concentrations. The dependence of UC intensity on pumping power indicated a two-photon emission process. Studies on dielectric properties indicated that the introduction of Er increased the ferroelectric-paraelectric phase transition temperature (Tc) of SBT, thus making this ceramic suitable for piezoelectric sensor applications at higher temperatures. Piezoelectric measurement showed that the doped SBT had a relative higher piezoelectric constant d{sub 33} compared with the non-doped ceramics. The thermal annealing behaviors of the doped sample revealed a stable piezoelectric property. The doped SBT showed bright UC emission while simultaneously having increased Tc and d{sub 33}. As a multifunctional material, Er doped SBT ferroelectric oxide showed great potential in application of sensor, future optical-electro integration and coupling devices.

36 MATERIALS SCIENCE↗

Interplay between chemical state, electric properties, and ferromagnetism in Fe-doped ZnO films

Valence state of Fe ions plays an important role in the physical properties of Fe doped ZnO films. Here, a series of Zn{sub 1-x}Fe{sub x}O films with different Fe concentrations (x = 0, 2.3, 5.4, 7.1, and 9.3 at. %) were prepared to investigate their structural, piezoelectric, ferroelectric, bipolar resistive switching properties, and electrical-control of ferromagnetism at room temperature. The structure characterizations indicate that the chemical state of Fe ions substituting Zn{sup 2+} site changes from Fe{sup 3+} to Fe{sup 2+} with the increase of Fe dopant concentration. We found enhanced piezoelectric and ferroelectric properties in Zn{sub 0.977}Fe{sub 0.023}O films with more Fe{sup 3+} due to the smaller Fe{sup 3+} ionic size in comparison with Zn{sup 2+} while the increase of Fe{sup 2+} concentration by a larger amount of Fe dopant results in the worse ferroelectric and piezoelectric performance. All Pt/Zn{sub 1-x}Fe{sub x}O/Pt devices show bipolar resistive switching properties. Especially, devices with lower Fe dopant concentration exhibit better endurance properties due to their higher crystalline quality. The variation of oxygen vacancies during resistive switching provides an opportunity to tune ferromagnetism of Fe-doped ZnO films, giving rise to the integration of charge and spin into a simple Pt/Zn{sub 1-x}Fe{sub x}O/Pt devices. The multifunctional properties of Fe-doped ZnO films are promising for communication systems and information storage devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabricating functionally graded films with designed gradient profiles using pulsed laser deposition

A novel picosecond-laser pulsed laser deposition method has been developed for fabricating functionally graded films with pre-designed gradient profiles. Theoretically, the developed method is capable of precisely fabricating films with any thicknesses and any gradient profiles by controlling the laser beam powers for the two different targets based on the film composition profiles. As an implementation example, we have successfully constructed functionally graded diamond-like carbon films with six different gradient profiles: linear, quadratic, cubic, square root, cubic root, and sinusoidal. Energy dispersive X-ray spectroscopy is employed for investigating the chemical composition along the thickness of the film, and the deposition profile and thickness errors are found to be less than 3% and 1.04%, respectively. To the best of the authors' knowledge, this is the first method for fabricating films with designed gradient profiles and has huge potential in many areas of coatings and films, including multifunctional optical films. We believe that this method is not only limited to the example considered in this study, but also can be applied to all material combinations as long as they can be deposited using the pulsed laser deposition technique.

36 MATERIALS SCIENCE↗

Phase behaviors of supramolecular graft copolymers with reversible bonding

Phase behaviors of supramolecular graft copolymers with reversible bonding interactions were examined by the random-phase approximation and real-space implemented self-consistent field theory. The studied supramolecular graft copolymers consist of two different types of mutually incompatible yet reactive homopolymers, where one homopolymer (backbone) possesses multifunctional groups that allow second homopolymers (grafts) to be placed on. The calculations carried out show that the bonding strength exerts a pronounced effect on the phase behaviors of supramolecular graft copolymers. The length ratio of backbone to graft and the positions of functional groups along the backbone are also of importance to determine the phase behaviors. Phase diagrams were constructed at high bonding strength to illustrate this architectural dependence. It was found that the excess unbounded homopolymers swell the phase domains and shift the phase boundaries. The results were finally compared with the available experimental observations, and a well agreement is shown. The present work could, in principle, provide a general understanding of the phase behaviors of supramolecular graft copolymers with reversible bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Power consumption monitoring using additional monitoring device

Today, emphasis is placed on reducing power consumption. Computers are large consumers; therefore it is important to know the total consumption of computing systems. Since their optimal functioning requires quite strict environmental conditions, without much variation in temperature and humidity, reducing energy consumption cannot be made without monitoring environmental parameters. Thus, the present work uses a multifunctional electric meter UPT 210 for power consumption monitoring. Two applications were developed: software which carries meter readings provided by electronic and programming facilitates remote device and a device for temperature monitoring and control. Following temperature variations that occur both in the cooling system, as well as the ambient, can reduce energy consumption. For this purpose, some air conditioning units or some computers are stopped in different time slots. These intervals were set so that the economy is high, but the work's Datacenter is not disturbed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural, electrical, and magnetic properties of Ba{sub 0.9}Ca{sub 0.1}Ti{sub 0.97}Fe{sub 0.03}O{sub 3} and the effect of oxygen vacancies

Detailed experimental studies have been carried out on a new possible dilute magnetic insulator Ba{sub 0.9}Ca{sub 0.1}Ti{sub 0.97}Fe{sub 0.03}O{sub 3−δ} and its oxygen deficient counterpart. Both the samples stabilize in overall tetragonal BaTiO{sub 3} structure at room temperature as indicated by x-ray diffraction and do exhibit room temperature magnetic order with obvious dependencies on δ. Apart from this, the as-grown sample also retains ferroelectricity at room temperature, which could potentially open up a possibility of achieving multifunctionality at room temperature. However, even though the magnetism is positively influenced by oxygen vacancies, the microscopic phase and ferroelectricity get adversely affected. Finally, using local structural probes, existence of diffused phases has been found, which successfully explains all the observed physical properties.

36 MATERIALS SCIENCE↗

Nd{sup 3+} doped LaF{sub 3} nanoparticles as self-monitored photo-thermal agents

In this work, we demonstrate how LaF{sub 3} nanoparticles activated with large concentrations (up to 25%) of Nd{sup 3+} ions can simultaneously operate as biologically compatible efficient nanoheaters and fluorescent nanothermometers under single beam (808 nm) infrared laser excitation. Nd{sup 3+}:LaF{sub 3} nanoparticles emerge as unique multifunctional agents that could constitute the first step towards the future development of advanced platforms capable of simultaneous deep tissue fluorescence bio-imaging and controlled photo-thermal therapies.

60 APPLIED LIFE SCIENCES↗