Search NASA⌕ Search

SEARCH · Search NASA

Results for “pattern separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Quaternary slip rates and most recent surface rupture of the Bitterroot fault, western Montana

The Bitterroot fault is a ~100-km-long Quaternary active normal fault that bounds the eastern margin of the north–south-trending Bitterroot Mountains and accommodates extension near the Intermountain Seismic Belt. Here, new detailed mapping using high-resolution topographic data derived from light detection and ranging (lidar) along the southern Bitterroot Range documents multiple generations of fault scarps in Holocene–Pleistocene deposits with vertical off sets that increase in magnitude with age. Fault mapping indicates a complex fault geometry characterized by an en echelon pattern of discontinuous segments of 41–78° east-dipping normal faults that appear to cut the older Eocene detachment fault, and locally 70–88° west-dipping antithetic normal faults. 10 Be cosmogenic exposure dating provides in situ age control for 32 surface boulders (>1 m) sampled in glacial deposits. Near Como Dam, two Pinedale-age glacial moraine sequences yield peak age distributions of 15.0 ± 0.4 ka and 16.4 ± 0.6 ka as apparent exposure ages (e = 0), and 15.4 ± 0.4 ka and 16.8 ± 0.6 ka based on the maximum allowed boulder surface erosion rate (e = 2 mm/ka). Vertical separation of 3.5 ± 0.2 m across the ~16–17 ka glacial moraine off set by the Bitterroot fault scarp yields a fault slip rate of 0.2–0.3 mm/yr. Glacial Lake Missoula highstand shorelines, inset into the ~15 ka glacial moraine and vertically off set 4.6 ± 1.6 m by an antithetic strand of the Bitterroot fault, yield fault slip rates of 0.2–0.5 mm/yr that overlap with fault slip rates on the main strand near Lake Como (0.2–0.3 mm/yr). At the Ward Creek fan located ~15 km to the north of Lake Como, two glacial debris fan sequences yield peak age distributions of 16.6 ± 0.4 ka and 62.8 ± 1.7 ka (e = 0), and 17.0 ± 0.4 ka and 69.9 ± 2.2 ka (e = 2 mm/ka). Vertical separations of 2.4 ± 0.3 m and 4.5 ± 0.2 m on the ~17 ka and ~63–70 ka fan surfaces off set by the Bitterroot fault yield fault slip rates of 0.2–0.3 mm/yr and 0.1 mm/yr, respectively. Our results indicate broadly consistent fault slip rates for the main fault segments at Lake Como (0.2–0.3 mm/yr) and the Ward Creek fan (0.1–0.3 mm/yr) with an along-strike range of 0.1–0.3 mm/yr for the southern Bitterroot fault. Fault scaling relations and evidence of multiple late Quaternary fault surface ruptures suggest the Bitterroot fault could produce a Mw ~7.2 earthquake. Structural model constraints and our slip rate results indicate both high-angle or low-angle fault geometries are possible at depth. A seismogenic low-angle fault model could generate a larger earthquake of Mw >7.2. Earthquake history is unknown for the Bitterroot fault, but fault scarps in young glacial deposits demonstrate its seismogenic potential. Data from this study suggest seismic hazards from the Bitterroot fault may pose a high level of risk to the Missoula metropolitan area, the State’s second most populous region, and major infrastructures across the Missoula and Bitterroot Valleys.

58 GEOSCIENCES↗

Observations on the long-period variability of the Gulf Stream downstream of Cape Hatteras

To examine the long-period variability of the Gulf Stream, sea level residuals relative to a 2-year mean sea level in the Gulf Stream downstream of Cape Hatteras (between 75 deg W and 60 deg W longitude) are used. Residuals, as derived from Geosat altimetry between November 1986 and December 1988, were gridded in space and time at a temporal resolution of 10 days and spatial resolution of 1/4 deg. Complex empirical orthogonal function (CEOF) analysis was applied to the data set to extract the spatially correlated signal with the original data subsampled to 1/2 deg. In addition to determining the space-time scales and propagation characterisitics of the different modes, wavenumber-frequency spectral techniques were used to separate the variability into propagating and stationary components. The CEOF technique applied to the data set indicated that the first four CEOF modes accounted for 60% of the variability and were found to be above the noise leve 99% of the time. CEOF 1 was associated with westward propagation at 5 km/d at a wavelength of 2000 km and eastward propagation at 1-2 km/d centered at a 500-km wavelength. This first CEOF is in good agreement with thin-jet equivalent barotropic models which predict westward propagation for wavelengths greater than 1130 km. A deflection of the wavelike pattern at 65 deg W also indicates a possible topographic effect. A simple scaling of the effect of topography indicates that for length scales longer than the internal Rossby radius of deformation, the topographic term is at least of the same order of magnitude as the beta effect. The second CEOF was more broadbanded in wavenumber space, with eastward propagation occurring in a wavenumber-frequency band between 300 and 1400 km and 0.5 and 2.0 cycles/yr. The third CEOF is similar in structure to the first, but with less energy. CEOF 4 was clearly identifiable with higher frequencies than the first three with westward propagation at 4 km/d. The spatial location of this mode along with the westward propagation indicates possible influences from eddy-stream interactions. Thus topography, Rossby wave dynamics and eddy-stream interactions all appear to have a significant role in determining the space-time scales and propagation properties of the long-period response of sea level in the Gulf Stream.

Vazquez, Jorge↗

Digitally Synthesized Phased Antenna for Multibeam Global Positioning

In a system according to the proposed technique, the signal received by each element of the array antenna would be subjected to downconversion, and spread-spectrum demodulation and correlation as necessary; this processing would be performed separately from, and simultaneously with, similar processing of signals received by the other antenna elements. For the GPS implementation, following downconversion to baseband, the signals would be digitized, and all subsequent processing would be digital. In In the digital process, residual carriers would be removed and each signal would be correlated with a locally generated model pseudo random-noise code, all following normal GPS procedure. As part of this procedure, accumulated values would be added in software and the resulting signals would be phase-shifted in software by the amounts necessary to synthesize the desired antenna directional gain pattern of peaks and nulls. The principal advantage of this technique over the conventional radio-frequency-combining technique is that the parallel digital baseband processing of the signals from the various antenna elements would be a relatively inexpensive and flexible means for exploiting the inherent multiple-peak/multiple-null aiming capability of a phased-array antenna. In the original intended GPS application, the peaks and nulls could be directed independently for each GPS signal being tracked by the GPS receiver. This will improve the SNR simultaneously for each GPS signal being tracked while steering multiple nulls toward sources of interference. The technique could also be applied to other code-division multiple-access communication systems.

Charles E Dunn↗

Freestanding Photoresist Film: A Versatile Template for Three-Dimensional Micro- and Nanofabrication

Ultrathin freestanding films with well-defined micro/nanostructures and robust mechanical properties are applied in many engineering applications including microelectronics, optics, filtration and separation, biomedical engineering, and nanotechnology. Although considerable efforts have been made toward the fabrication of freestanding thin films, it is still a significant challenge to develop a simple and reliable process for producing freestanding films with ultrathin thickness, well-regulated micro/nanopatterns, robust mechanical properties, macroscopic coverage area, and multi-layered composite structures. In this work, a significant advancement is reported in this regard. This study shows a new sacrificial-layer-free (SLF) lifting-off process, integrated with conventional micro- and nanolithography, enabling the release of micro- and nanopatterned photoresist (PR) films from the supporting substrate with unprecedented pattern coverage and structure characteristics. The freestanding PR film is resilient, can withstand significant bending and deformation, and is sufficiently flexible to be transferred onto substrates with 3D topography as a conformal soft stencil for further technological processing and applications. Moreover, the SLF lifting-off process provides a simple approach to prepare single-layered and multi-layered freestanding composite films. The results suggest that the novel SLF lifting-off process can significantly extend the capability of 3D micro-/nanofabrication.

36 MATERIALS SCIENCE↗

SU-F-E-13: Design and Fabrication of Gynacological Brachytherapy Shielding & Non Shielding Applicators Using Indigenously Developed 3D Printing Machine

Purpose: In this innovative work we have developed Gynecological Brachytherapy shielding & Non Shielding Applicators and compared with the commercially available applicators by using the indigenously developed 3D Printing machine. Methods: We have successfully indigenously developed the 3D printing machine. Which contain the 3 dimensional motion platform, Heater unit, base plate, ect… To fabricate the Gynecological Brachytherapy shielding & non shielding applicators the 3D design were developed in the computer as virtual design. This virtual design is made in a CAD computer file using a 3D modeling program. Separate programme for the shielding & non shielding applicators. We have also provided the extra catheter insert provision in the applicator for the multiple catheter. The DICOM file of the applicator were then converted to stereo Lithography file for the 3D printer. The shielding & Non Shielding Applicators were printed on a indigenously developed 3D printer material. The same dimensions were used to develop the applicators in the acrylic material also for the comparative study. A CT scan was performed to establish an infill-density calibration curve as well as characterize the quality of the print such as uniformity and the infill pattern. To commission the process, basic CT and dose properties of the printing materials were measured in photon beams and compared against water and soft tissue. Applicator were then scanned to confirm the placement of multiple catheter position. Finally dose distributions with rescanned CTs were compared with those computer-generated applicators. Results: The doses measured from the ion Chamber and X-Omat film test were within 2%. The shielded applicator reduce the rectal dose comparatively with the non shielded applicator. Conclusion: As of submission 3 unique cylinders have been designed, printed, and tested dosimetrically. A standardizable workflow for commissioning custom 3D printed applicators was codified and will be reported.

60 APPLIED LIFE SCIENCES↗

High Resolution Aerosol Jet Printed Components with Electrodeposition-Enhanced Conductance

Aerosol Jet Printing (AJP) is one technique of additive manufacturing used in the printing of electronics components. AJP enables the patterning of features at the ~10 μm–100 μm scale based on hardware and print parameters. Additionally, optimization of print conditions enables the printing of high-resolution features with linewidths approaching 10 μm. The aerosol jet printing of electronic parts can be limited by the conductivities which are achievable by Ag nanoparticle inks (typically 15%–25% of bulk Ag). For certain electronics applications, the increased conductivity produces unacceptable loses during operation and methods are needed to increase the conductance of the devices without sacrificing resolution. Here, we report on the AJP of inductor spirals conductor traces of linewidth 50 μm separated by 55 μm gaps. The conductivity of these features is enhanced by electrodeposition of Cu onto the Ag, resulting in a decrease in resistance of 35–45x. Impedance measurements demonstrate that the addition of Cu by electrodeposition to a 27-turn spiral inductor resulted in an inductance of 3.6 μH. Finally, we demonstrate the use of a lift-off process to produce free-standing, flexible, conductive films using AJP.

36 MATERIALS SCIENCE↗

Mapping causal patterns in crystalline solids

The evolution of the atomic structures of the combinatorial library of Sm-substituted thin film BiFeO 3 along the phase transition boundary from the ferroelectric rhombohedral phase to the non-ferroelectric orthorhombic phase is explored using scanning transmission electron microscopy. Localized properties, including polarization, lattice parameter, and chemical composition, are parameterized from atomic-scale imaging, and their causal relationships are reconstructed using a linear non-Gaussian acyclic model. This approach is further extended to explore the spatial variability of the causal coupling using the sliding window transform method, which revealed that new causal relationships emerged at both the expected locations, such as domain walls and interfaces, and at additional regions forming clusters in the vicinity of the walls or spatially distributed features. While the exact physical origins of these relationships are unclear, they likely represent nanophase-separated regions in the morphotropic phase boundaries. Overall, we posit that an in-depth understanding of complex disordered materials away from thermodynamic equilibrium necessitates understanding not only the generative processes that can lead to observed microscopic states but also the causal links between multiple interacting subsystems.

Causal inference↗

Crystal structure of vardenafil hydrochloride trihydrate, C 23 H 33 N 6 O 4 SCl (H 2 O) 3

The crystal structure of vardenafil hydrochloride trihydrate has been solved and refined using synchrotron X-ray powder diffraction data, and optimized using density functional techniques. Vardenafil hydrochloride trihydrate crystallizes in space group C 2/ c (#15) with a = 34.78347(16), b = 11.56752(4), c = 14.69308(5) Å, β = 93.3410(4), V = 5901.839(30) Å 3 , and Z = 8. The fused ring system and the phenyl ring are nearly co-planar; the interplanar angle between them is 6.0°. Two intramolecular hydrogen bonds help determine this conformation. These planes stack along the c -axis. The side chains of these ring systems have a large U iso and are neighbors in the stacks. Along the a -axis, these stacks are separated by hydrophilic layers of chloride, water molecules, and the positively charged nitrogen atoms of the vardenafil cation. Hydrogen bonds are prominent in the crystal structure. The protonated nitrogen atom forms a strong hydrogen bond to the chloride anion. The water molecules form a hexagon, making hydrogen bonds with themselves, as well as the C1 and a ring nitrogen atom. These discrete hydrogen bonds form a cluster, and there is no extended hydrogen bond network. There are many C–H⋯Cl, C–H⋯O, and C–H⋯N hydrogen bonds, which (although individually weak) contribute significantly to the crystal energy. The powder pattern is included in the Powder Diffraction File™ as entry 00-066-1620.

Wheatley, Austin M.↗

Structural Characterization of Native Proteins and Protein Complexes by Electron Ionization Dissociation-Mass Spectrometry

Mass spectrometry (MS) has played an increasingly important role in the identification and structural and functional characterization of proteins. In particular, the use of tandem mass spectrometry has afforded one of the most versatile methods to acquire structural information for proteins and protein complexes. The unique nature of electron capture dissociation (ECD) for cleaving protein backbone bonds while preserving non-covalent interactions has made it especially suitable for the study of native protein structures. However, the intra- and inter-molecular interactions stabilized by hydrogen bonds and salt bridges can hinder the separation of fragments even with pre-activation, which has become particularly problematic for the study of large macromolecular proteins and protein complexes. Here, we describe the capabilities of another activation method, 30 eV electron ionization dissociation (EID), for the top-down MS characterization of native protein-ligand and protein-protein complexes. Rich structural information that cannot be delivered by ECD can be generated by EID. EID allowed for the comparison of the gas-phase and the solution-phase structural stability and unfolding process of human carbonic anhydrase I (HCA-I). In addition, the EID fragmentation patterns reflect the structural similarities and differences among apo-, Zn-, and Cu,Zn-superoxide dismutase (SOD1) dimers. In particular, the structural changes due to Cu-binding and a point mutation (G41D) were revealed by EID-MS. The performance of EID was also compared to that of 193 nm ultraviolet photodissociation (UVPD), which allowed us to explore their qualitative similarities and differences as potential valuable tools for the MS study of native proteins and protein complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First detection of VHE gamma-ray emission from TXS 1515–273, study of its X-ray variability and spectral energy distribution

ABSTRACT We report here on the first multiwavelength (MWL) campaign on the blazar TXS 1515–273, undertaken in 2019 and extending from radio to very-high-energy gamma-rays (VHE). Up until now, this blazar had not been the subject of any detailed MWL observations. It has a rather hard photon index at GeV energies and was considered a candidate extreme high-synchrotron-peaked source. MAGIC observations resulted in the first-time detection of the source in VHE with a statistical significance of 7.6σ. The average integral VHE flux of the source is 6 ± 1 per cent of the Crab nebula flux above 400 GeV. X-ray coverage was provided by Swift-XRT, XMM–Newton, and NuSTAR. The long continuous X-ray observations were separated by ∼9 h, both showing clear hour scale flares. In the XMM–Newton data, both the rise and decay time-scales are longer in the soft X-ray than in the hard X-ray band, indicating the presence of a particle cooling regime. The X-ray variability time-scales were used to constrain the size of the emission region and the strength of the magnetic field. The data allowed us to determine the synchrotron peak frequency and classify the source as a flaring high, but not extreme synchrotron-peaked object. Considering the constraints and variability patterns from the X-ray data, we model the broad-band spectral energy distribution. We applied a simple one-zone model, which could not reproduce the radio emission and the shape of the optical emission, and a two-component leptonic model with two interacting components, enabling us to reproduce the emission from radio to VHE band.

Acciari, V. A.↗

Defect Annihilation Pathways in Directed Assembly of Lamellar Block Copolymer Thin Films

Defects in highly ordered self-assembled block copolymers represent an important roadblock toward the adoption of these materials in a wide range of applications. This work examines the pathways for annihilation of defects in symmetric diblock copolymers in the context of directed assembly using patterned substrates. Past theoretical and computational studies of such systems have predicted minimum free energy pathways that are characteristic of an activated process. However, they have been limited to adjacent dislocations with opposite Burgers vectors. By relying on a combination of advanced sampling techniques and particle-based simulations, this work considers the long-range interaction between dislocation pairs, both on homogeneous and nanopatterned substrates. As illustrated here, these interactions are central to understanding the defect structures that are most commonly found in applications and in experimental studies of directed self-assembly. More specifically, it is shown that, for dislocation dipoles separated by several lamellae, multiple consecutive free energy barriers lead to effective kinetic barriers that are an order of magnitude larger than those originally reported in the literature for tightly bound dislocation pairs. Furthermore, it is also shown that annihilation pathways depend strongly on both the separation between dislocations and their relative position with respect to the substrate guiding stripes used to direct the assembly.

36 MATERIALS SCIENCE↗

Chemical systematics of the Shergotty meteorite and the composition of its parent body (Mars)

Sixty elements in two bulk samples of Shergotty meteorite and 30 elements in various mineral separates of Shergotty were identified, using mainly INAA and RNAA techniques. In addition, elements leached out from powdered samples of Shergotty and EETA 79001 meteorites by 0.1 N HCl, as well as the elements of their residues, were analyzed. The results have indicated that Shergotty meteorite is homogeneous in its major element composition, but heterogeneous with respect to large-ion lithophile elements, such as K, Ba, Sr, Zr, Hf, Ta, Th, and rare-earth elements (REEs). It is even more heterogeneous with respect to volatile elements, such as Cd, Te, Tl, and Bi, and the siderophiles Au and Ag. The REE patterns of the Shergotty and EETA 79001 residues are identical, indicating that the parent magmas of both meteorites are compositionally similar. However, their leachate (phosphate) patterns are different, suggesting two components for the Shergotty, one of which is similar to the EETA 79001 leachate.

Laul, J. C.↗

Evaluating the design of an earth radiation budget instrument with system simulations. Part 2: Minimization of instantaneous sampling errors for CERES-I

Much of the new record of broadband earth radiation budget satellite measurements to be obtained during the late 1990s and early twenty-first century will come from the dual-radiometer Clouds and Earth's Radiant Energy System Instrument (CERES-I) flown aboard sun-synchronous polar orbiters. Simulation studies conducted in this work for an early afternoon satellite orbit indicate that spatial root-mean-square (rms) sampling errors of instantaneous CERES-I shortwave flux estimates will range from about 8.5 to 14.0 W/m on a 2.5 deg latitude and longitude grid resolution. Rms errors in longwave flux estimates are only about 20% as large and range from 1.5 to 3.5 W/sq m. These results are based on an optimal cross-track scanner design that includes 50% footprint overlap to eliminate gaps in the top-of-the-atmosphere coverage, and a 'smallest' footprint size to increase the ratio in the number of observations lying within to the number of observations lying on grid area boundaries. Total instantaneous measurement error also depends on the variability of anisotropic reflectance and emission patterns and on retrieval methods used to generate target area fluxes. Three retrieval procedures from both CERES-I scanners (cross-track and rotating azimuth plane) are used. (1) The baseline Earth Radiaton Budget Experiment (ERBE) procedure, which assumes that errors due to the use of mean angular dependence models (ADMs) in the radiance-to-flux inversion process nearly cancel when averaged over grid areas. (2) To estimate N, instantaneous ADMs are estimated from the multiangular, collocated observations of the two scanners. These observed models replace the mean models in computation of satellite flux estimates. (3) The scene flux approach, conducts separate target-area retrievals for each ERBE scene category and combines their results using area weighting by scene type. The ERBE retrieval performs best when the simulated radiance field departs from the ERBE mean models by less than 10%. For larger perturbations, both the scene flux and collocation methods produce less error than the ERBE retrieval. The scene flux technique is preferable, however, because it involves fewer restrictive assumptions.

Stowe, Larry↗

Rat Gestation During Space Flight: Outcomes for Dams and Their Offspring Born After Return to Earth

Sprague-Dawley rats were studied to learn whether gestation in the near-zero gravity, high radiation environment of space impacts selected mammalian postnatal events. Ten rats spent days nine to twenty of pregnancy aboard the space shuttle orbiter Atlantis (STS-66). Their movement was studied shortly after return to Earth; subsequently, several of their offspring were cross-fostered and examined through postnatal day 81 (P81) for whole body growth and somatic motor development. Values for the flight animals were compared to ground-based control groups. Relative to controls, the pregnant flight rats showed a marked paucity of locomotion during the first few hours after returning to Earth. There was greater likelihood of perinatal morbidity for the offspring of flight dams when compared to the control groups. Whole body weight of surviving offspring, averaged for each group separately, showed typical sigmoidal growth curves when plotted against postnatal age. The flight group for our study had a larger ratio of female to male pups, and that was sufficient to account for the lower average daily weight gained by the flight animals when compared to the control groups. Walking was universally achieved by P13 and preceded eye opening, which was complete in all pups by P17. Thus, both of these developmental horizons were attained on schedule in the flight as well as the control rats. Characteristic changes were observed in hind limb step length and gait width as the pups grew. These patterns occurred at the same time in each group of rats. Therefore, prenatal space flight from days nine to twenty of gestation did not interfere with the establishment of normal patterns for hind paw placement during walking.

Wong, Andre M.↗

Progressive Damage Failure Analysis of a Multi-Stringer Post-Buckled Panel

Validation of a progressive damage finite element analysis model using the CompDam material model was performed on a large multi-stringer panel subjected to compressive loading. The panel had a Teflon insert embedded between the skin panel and stiffener to cause an ultimate failure mode of stiffener separation. The compressive loading of the panel caused the skin between the stiffeners to locally buckle before any damage began to occur. The post-buckled behavior of the panel was the driving mechanism to the onset of damage and the damage growth that led to skin-stiffener separation. An integrated global-local modeling approach was used to validate several aspects the overall behavior of the panel from start to failure. The global region captured the pre-buckled stiffness of the test panel within 10% and the buckling load of the skin panel at the critical location within 2%. The skin’s five half-wave buckled mode shape was accurately predicted by the model. The integrated local model captured the load corresponding to the onset of damage within 5% of the average test data. Comparisons are made for key aspects of the damage morphology, such as a growth pattern that included a significant matrix split in the first ply of the skin and a migration of the delamination from the skin-stiffener interface to the skin’sply1-ply2 interface. The ultimate failure mode was shown to be an unstable growth of delamination damage under the stiffeners which led to a peak load of the analysis that was approximately 5% above the average peak load of the testing. The validated global-local modeling approach used on the multi-stringer post-buckled panel with a Teflon insert used a methodology and lessons learned using smaller specimens applied to a subcomponent that captured several aspects of a modern aircraft design.

Jason Action↗

Poleward Migration of the Latitude of Maximum Tropical Cyclone Intensity—Forced or Natural?

Abstract Past studies have shown a significant observed poleward trend in the latitude at which tropical cyclones reach their lifetime maximum intensity (LMI), especially in the northwest Pacific basin. Given the brevity of the historical record, it remains difficult to separate the forced trend from internal variability of the climate system. A recently developed tropical cyclone downscaling model is used to downscale the Community Earth System Model, version 2 (CESM2), preindustrial control simulation. It is found that the observed trend in the latitude at which tropical cyclones reach their LMI in the northwest Pacific is very unlikely to be caused by internal variability. The same downscaling model is then used to downscale CESM2 simulations under historical forcing. The resulting trend distribution shows a significant poleward migration of tropical cyclone LMI even after regressing out both natural variability and the part of the forced warming pattern that projects onto natural variability. The results indicate that the observed poleward migration of the latitude at which tropical cyclones reach their LMI in the northwest Pacific basin is likely to be, at least in part, forced. However, the magnitude of the projected poleward trend in climate models can be significantly modulated by the simulated spatial pattern of ocean warming. This highlights how discrepancies between models and observations, with regard to projected changes to the equatorial zonal sea surface temperature gradient under anthropogenic forcing, can lead to large uncertainties in projected changes to the LMI latitude of tropical cyclones. Significance Statement Observations in the northwest Pacific basin show that the latitude at which tropical cyclones are at their most intense has been trending northward in the recent half century. These changes are important since tropical cyclones could bring hazardous weather to coastal areas that are poorly equipped to handle them. Here, we show that natural variations in Earth’s climate are very unlikely to explain the observed poleward trend in the latitude that tropical cyclone reach their maximum intensity. We find that it is much more likely that the observed trend is forced by human-related emissions, though the spatial pattern of warming in response to greenhouse emissions can have significant impacts on the magnitude of the trend.

Lin, Jonathan↗

Composition of the carbohydrate granules of the cyanobacterium, Cyanothece sp. strain ATCC 51142

Cyanothece sp. strain ATCC 51142 is an aerobic, unicellular, diazotrophic cyanobacterium that temporally separates O2-sensitive N2 fixation from oxygenic photosynthesis. The energy and reducing power needed for N2 fixation appears to be generated by an active respiratory apparatus that utilizes the contents of large interthylakoidal carbohydrate granules. We report here on the carbohydrate and protein composition of the granules of Cyanothece sp. strain ATCC 51142. The carbohydrate component is a glucose homopolymer with branches every nine residues and is chemically identical to glycogen. Granule-associated protein fractions showed temporal changes in the number of proteins and their abundance during the metabolic oscillations observed under diazotrophic conditions. There also were temporal changes in the protein pattern of the granule-depleted supernatant fractions from diazotrophic cultures. None of the granule-associated proteins crossreacted with antisera directed against several glycogen-metabolizing enzymes or nitrogenase, although these proteins were tentatively identified in supernatant fractions. It is suggested that the granule-associated proteins are structural proteins required to maintain a complex granule architecture.

NASA Discipline Cell Biology↗

Binary Colloidal Alloy Test Conducted on Mir

Colloids are tiny (submicron) particles suspended in fluid. Paint, ink, and milk are examples of colloids found in everyday life. The Binary Colloidal Alloy Test (BCAT) is part of an extensive series of experiments planned to investigate the fundamental properties of colloids so that scientists can make colloids more useful for technological applications. Some of the colloids studied in BCAT are made of two different sized particles (binary colloidal alloys) that are very tiny, uniform plastic spheres. Under the proper conditions, these colloids can arrange themselves in a pattern to form crystals. These crystals may form the basis of new classes of light switches, displays, and optical devices. Windows made of liquid crystals are already in the marketplace. These windows change their appearance from transparent to opaque when a weak electric current is applied. In the future, if the colloidal crystals can be made to control the passage of light through them, such products could be made much more cheaply. These experiments require the microgravity environment of space because good quality crystals are difficult to produce on Earth because of sedimentation and convection in the fluid. The BCAT experiment hardware included two separate modules for two different experiments. The "Slow Growth" hardware consisted of a 35-mm camera with a 250- exposure photo film cartridge. The camera was aimed toward the sample module, which contained 10 separate colloid samples. A rack of small lights provided backlighting for the photographs. The BCAT hardware was launched on the shuttle and was operated aboard the Russian space station Mir by American astronauts John Blaha and David Wolf (launched September 1996 and returned January 1997; reflown September 1997 and returned January 1998). To begin the experiment, one of these astronauts would mix the samples to disperse the colloidal particles and break up any crystals that might have already formed. Once the samples were mixed and the experiment was powered on, the hardware operated autonomously, taking photos of the colloidal samples over a 90-day period.

Hoffmann, Monica I.↗