SEARCH · Search NASA

Results for “reflection data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

All sources NASA NTRS DOE OSTI

NASA NTRS1975

In situ spectroradiometric quantification of ERTS data

The author has identified the following significant results. Analyses of ERTS-1 photographic data were made to quantitatively relate ground reflectance measurements to photometric characteristics of the images. Digital image processing of photographic data resulted in a nomograph to correct for atmospheric effects over arid terrain. Optimum processing techniques to derive maximum geologic information from desert areas were established. Additive color techniques to provide quantitative measurements of surface water between different orbits were developed which were accepted as the standard flood mapping techniques using ERTS.

Yost, E. F.↗

NASA NTRS1989

Infrared/submillimeter optical properties data base

The general goal was to build a data base containing optical properties, such as reflectance, transmittance, refractive index, in the far infrared to submillimeter wavelength region. This data base would be limited to selected crystalline materials and temperature between 300 and 2 K. The selected materials were: lithium, lead, and strontium; the bromides of potassium and thallium; the carbides of silicone and tungsten; and the materials of KRS5, KRS6, diamond, and sapphire. Last summer, barium fluoride was selected as prototype material for building the data base. This summer the literature search, preparation of the data for barium fluoride was completed. In addition the literature search for data related to the compounds mentioned was completed. The current status is that barium fluoride is in a form suitable for a NASA internal publication. The papers containing the data on the other materials were xeroxed and they are ready to be reduced. On the reverse side, the top figure is a sample combination of data for the index of refraction at 300 K. The lower figure shows the transmittance vs wavelength at 300 and 80 K. These figures are a sample of many which were developed. Since barium fluoride was studied more than most of the materials listed above, it is clear that additional measurements should be made to fill in the gaps present on both temperature and wavelength data.

Alley, Phillip W.↗

NASA NTRS1981

Ground truth for oceanic rainfall

Communications systems operating at frequencies in excess of 10 GHz are degraded significantly by rainfall. To provide the information needed for design of these millimeter wave systems, rain attentuation models were developed and data bases of propagation related information were accumulated. These data bases were developed based on the signal level measurements of geostationary satellite beacons at selected frequencies. Groundbased radar reflection measurements were able to develop data bases for system design. The rain attenuation models allow accurate correlation between the rain rate and the attenuation.

Dorman, C. E.↗

NASA NTRS2000

Effect of Medium Symmetries in Limiting the Number of Parameters Estimated with Polarimetric Interferometry

The addition of interferometric backscattering pairs to the conventional polarimetric SAR data over forests and other vegetated areas increases the dimensionality of the data space, in principle enabling the estimation of a larger number of vegetation parameters. Without regard to the sensitivity of these data to vegetation scattering parameters, this paper poses the question: Will increasing the data channels as such result in a one-to-one increase in the number of parameters that can be estimated, or do vegetation and data properties inherently limit that number otherwise? In this paper, the complete polarimetric interferometric covariance matrix is considered and various symmetry properties of the scattering medium are used to study whether any of the correlation pairs can be eliminated. The number of independent pairs has direct consequences in their utility in parameter estimation schemes, since the maximum number of parameters that can be estimated cannot exceed the number of unique measurements. The independent components of the polarimetric interferometric SAR (POL/INSAR) data are derived for media with reflection, rotation, and azimuth symmetries, which are often encountered in vegetated surfaces. Similar derivations have been carried out before for simple polarimetry, i.e., zero baseline. This paper extends those to the interferometric case of general nonzero baselines. It is shown that depending on the type of symmetries present, the number of independent available measurements that can be used to estimate medium parameters will vary. In particular, whereas in the general case there are 27 mathematically independent measurements possible from a polarimetric interferometer, this number can be reduced to 15, 9, and 6 if the medium has reflection, rotation, or azimuthal symmetries, respectively. The results can be used in several ways in the interpretation of SAR data and the development of parameter estimation schemes, which will be discussed at the presentation. Recent POL/INSAR data from the JPL AIRSAR over a forested area will be used to demonstrate the results of this derivation. This work was performed by the Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, under contract from the National Aeronautics and Space Administration.

Moghaddam, Mahta↗

NASA NTRS2017

A Study of Reflected Sonic Booms Using Airborne Measurements

In support of ongoing efforts to bring commercial supersonic flight to the public, the Sonic Booms in Atmospheric Turbulence (SonicBAT) flight test conducted at NASA Armstrong Flight Research Center. During this test, airborne sonic boom measurements were made using an instrumented TG-14 motor glider, called the Airborne Acoustic Measurement Platform (AAMP).During the flight program, the AAMP was consistently able to measure the sonic boom wave that was reflected off of the ground, in addition to the incident wave, resulting in the creation of a completely unique data set of airborne sonic boom reflection measurements.

sonic booms↗

NASA NTRS1993

Modeling Spectralon's Bidirectional Reflectance for In-Flight Calibration of Earth-Orbiting Sensors

This paper describes the results of a model inversion which was conducted using measured Spectralon BRDF data at several illumination angles. We can describe the bidirectional reflectance of the Spectralon and in paticular its slight anisotrophy with a physically-based model. The root mean square difference between the model and the observations is currently of the order of the noise in the data (+/-1%). It is expected that meaningful corrections to account for the anisotrophy of the Spectralon panels will be achieved in the next few years and will improve the calibration of the MISR instrument.

EOS↗

DOE OSTI2026

Crystal Growth of Quaternary RE 2 EuSi 2 S 8 ( RE = Ce–Nd, Sm, Gd, Tb) Using Flux-Assisted Boron Chalcogen Mixture (BCM) Method: Investigation of Magnetic and Luminescence Properties

A series of quaternary rare-earth containing thiosilicates with the general formula RE 2 EuSi 2 S 8 (RE = Ce–Nd, Sm, Gd, Tb) has been synthesized via the flux-assisted boron chalcogen mixture (BCM) crystal growth method. High-quality single crystals were obtained, and their crystal structures were determined by single-crystal X-ray diffraction. The RE 2 EuSi 2 S 8 series crystallizes in the trigonal system, adopting the space group R-3c. Polycrystalline samples were employed for physical property measurements, including magnetic susceptibility measurements, UV–visible diffuse reflectance, and photoluminescent response. Magnetic data of RE 2 EuSi 2 S 8 ( RE = Ce, Nd, and Gd) were collected over the 2–300 K temperature range. The samples were paramagnetic behavior with negative Weiss constants (θ W = −11.05, −10.55, and −1.35 K respectively). Their thermal stability was investigated using thermogravimetric analysis (TGA). Optical band gaps, estimated from diffuse reflectance spectra, were determined to be 2.2(1) eV for Ce 2 EuSi 2 S 8 , 1.8(1) eV for Nd 2 EuSi 2 S 8 , and 1.7(1) eV for Gd 2 EuSi 2 S 8 respectively. Finally, photoluminescence measurements were collected on Ce 2 EuSi 2 S 8 and Tb 2 EuSi 2 S 8 single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2000

BOREAS RSS-4 1994 Jack Pine Leaf Biochemistry and Modeled Spectra in the SSA

The BOREAS RSS-4 team focused its efforts on deriving estimates of LAI and leaf chlorophyll and nitrogen concentrations from remotely sensed data for input into the Forest BGC model. This data set contains measurements of jack pine (Pinus banksiana) needle biochemistry from the BOREAS SSA in July and August 1994. The data contain measurements of current and year-1 needle chlorophyll, nitrogen, lignin, cellulose, and water content for the OJP flux tower and nearby auxiliary sites. The data have been used to test a needle reflectance and transmittance model, LIBERTY (Dawson et al., in press). The source code for the model and modeled needle spectra for each of the sampled tower and auxiliary sites are provided as part of this data set. The LIBERTY model was developed and the predicted spectral data generated to parameterize a canopy reflectance model (North, 1996) for comparison with AVIRIS, POLDER, and PARABOLA data. The data and model source code are stored in ASCII files.

Hall, Forrest G.↗

NASA NTRS1976

Simulation of radiometer data from a spin stabilized satellite

The effect of misregistration on cloud brightness threshold is investigated by simulating radiometric data as observed from a spin stabilized synchronous satellite such as the SMS. Clouds were introduced randomly and a bidirectional reflectance model was used to create radiance data from clouds and ocean. A theoretical and an empirical reflectance model were compared.

Rangaswamy, S.↗

NASA NTRS1993

Use of spectral analogy to evaluate canopy reflectance sensitivity to leaf optical property

The spectral variation of canopy reflectance is mostly governed by the absorption properties of the elements, hence the leaves, since their intrinsic scattering properties show very little spectral variation. The relationship between canopy reflectance and leaf reflectance measured at the red edge over sugar beet canopies was used to simulate canopy reflectance from leaf reflectance spectra measured over the whole spectral domain. The results show that the spectral analogies found allows accurate reconstruction of canopy reflectance spectra. Explicit assumptions about the very low spectral variation of leaf intrinsic scattering properties are thus indirectly justified. The sensitivity of canopy reflectance (rho(sub c)) to leaf optical properties can then be investigated from concurrent spectral variations of canopy (delta rho(sub c)/delta lambda) and leaf reflectance (delta rho(sub l)/delta lambda): (delta rho(sub c))/(delta rho(sub l)) = ((delta rho(sub c))/(delta lambda) ((delta rho( sub l))/(delta lambda))(sup -1)). This expression is strictly valid only when the optical properties of the soil background or the other vegetation elements such as bark are either spectrally flat or do not contribute significantly to canopy reflectance. Simulations using the SAIL and PROSPECT models demonstrate that the sensitivity of canopy reflectance to leaf reflectance is significant for large vegetation cover fractions in spectral domains where absorption is low. In these conditions, multiple, scattering enhances the leaf absorption features by a factor that can be greater than 2.0. To override the limitations of the SAIL model for the description of the canopy architecture, we tested the previous findings on experimental data. Concurrent canopy and leaf reflectance spectra were measured for a range of sugar beet canopies. The results show good agreement with the theoretical findings. Conclusions are drawn about the applicability of these findings, with particular attention to the potential detectability of leaf biochemical composition from canopy reflectance sensed from space.

Baret, Frederic↗

NASA NTRS2009

MODIS Solar Reflective Calibration Traceability

Long-term climate data records often consist of observations made by multiple sensors. It is, therefore, extremely important to have instrument overlap, to be able to track instrument stability, to quantify, measurement uncertainties, and to establish absolute scale traceable to the International System of Units (SI). The Moderate Resolution Imaging Spectroradiometer (MODIS) is a key instrument for both the Terra and Aqua missions, which were launched in December 1999 and May 2002, respectively. It has 20 reflective solar bands (RSB) with wavelengths from 0.41 to 2.2 micrometers and observes the Earth at three nadir spatial resolutions: 0.25km, 0.5km, and 1km. MODIS RSB on-orbit calibration is reflectance based with reference to the bidirectional reflectance factor (BRF) of its on-board solar diffuser (SD). The SD BRF characterization was made pre-launch by the instrument vendor using reference samples traceable directly to the National Institute of Standards and Technology (NIST). On-orbit SD reflectance degradation is tracked by an on-board solar diffuser monitor (SDSM). This paper provides details of this calibration chain, from prelaunch to on-orbit operation, and associated uncertainty assessments. Using MODIS as an example, this paper also discusses challenges and key design requirements for future missions developed for accurate climate studies.

Xiong, Xiaoxiong↗

NASA NTRS1979

Frost formation on an airfoil: A mathematical model 1

A computer model to predict the frost formation process on a flat plate was developed for application to most environmental conditions under which frost occurs. The model was analytically based on a generalized frost thermal conductivity expression, on frost density and thickness rate equations, and on modified heat and mass transfer coefficients designed to fit the available experimental data. The broad experimental ranges reflected by the extremes in ambient humidities, wall temperatures, and convective flow properties in the various publications which were examined served to severely test the flexibility of the model. An efficient numerical integration scheme was developed to solve for the frost surface temperature, density, and thickness under the changing environmental conditions. The comparison of results with experimental data was very encouraging.

Dietenberger, M.↗

NASA NTRSDate not supplied

Latest Results from NASA Ames’ COSmIC and Optical Constants Facility (OCF): Determining Optical Constants for Titan, Pluto and Protoplanetary Disks Applications

The NASA Ames COsmic SImulation Chamber (COSmIC) is a unique experimental facility that can be used, among many applications, to produce solid particles from gas phase molecular precursors at low temperature (150 K) using a plasma discharge to induce the chemistry in the stream of a free jet expansion. The choice of the initial gas mixture used to produce the solid sample allows the simulation of either cold planetary atmospheres like Titan or Pluto (with N2/CH4-based initial mixtures), or circumstellar environments (with Ar/CxHy-based initial mixtures). The Ames Optical Constants Facility (OCF) allows the determination of optical constants covering a broad wavelength range with high spectral resolution for solid materials, analogs of organic refractory materials formed in planetary and astrophysical environments. The core of the OCF is a Fourier transform infrared (FTIR) spectrometer that allows the continuous characterization of solid samples in the visible to far-infrared (FIR) range (0.59–200 μm, 16,950–50 cm−1). Modeling of the laboratory measurements conducted with the OCF allows the determination of accurate optical constants, n and k, over the full vis-FIR range. Here we present the latest results of two studies that combined (1) experiments performed with COSmIC to produce analogs of aerosols forming in Titan’s atmosphere and analogs of cosmic grains forming in circumstellar envelops, and (2) the characterization of these analogs with the OCF to provide the real and imaginary parts of their refractive indices, n + ik, to the community, from the visible to the FIR. These optical constants can be used as critical input parameters in radiative transfer, atmospheric and reflectance models to interpret observational data of, e.g., Titan’s atmosphere and protoplanetary disks. Providing optical constants for various materials of different compositions allows to explore a broad range of composition by simulating mixtures of materials. We also present a new project to produce analogs of Pluto’s atmospheric aerosols with COSmIC and determine their optical constants with OCF, to be used in reflectance spectra models for the interpretation of New Horizons observations of Lowell Regio, Sputnik Planitia and Cthulhu.

COsmic SImulation Chamber (COSmIC)↗

DOE OSTI2026

2001 KIPDA Regional Household Travel Survey

The Kentuckiana Planning and Development Agency (KIPDA) conducted this four-month study from October 2000 through January 2001 to update regional travel demand models. The universe for the survey consisted of households in the five-county Louisville transportation planning study area, including Clark and Floyd counties in Indiana and Bullitt, Jefferson, and Oldham counties in Kentucky. Demographic variables and travel behavior characteristics were collected for 4,433 households in a 24-hour period. Of these, 4,113 were completed with households that were selected at random, and the remaining 320 were completed with representatives. The data from the survey only reflect travel by the selected residents of the five counties listed above and do not account for travel in the region by persons who were not residents of those five counties.

1Hz data↗

NASA NTRS1981

Ground level reflectance measurement techniques - An evaluation with emphasis on the importance of spectral calibration

The bandpasses, overflight conditions, and sensor geometry that will provide optimum target discrimination in remote-sensing studies can be determined only from spectral reflectance measurements made for various sun-target-sensor geometries, supplemented by model calculations which can be checked against field data. The accurate measurement of ground reflectance properties is critical to the design of future sensors and to the determination of imaging conditions. The current investigation has the objective to review typical methods of measuring spectral reflectance, to point out some of the problems inherent to reflectance measuring techniques, and to present a method of checking measurement accuracy.

Duggin, M. J.↗

NASA NTRS1987

A simplified derivation of leaf normal spherical coordinates

The paper presents formulas for the direction in spherical coordinates of the normal vector to a planar leaf in terms of the coordinates of incident and reflected rays. A simple idea from vector analysis is applied. These formulas are important in plant canopy modeling and experimental data collection in situations where specular reflection at optical wavelengths plays a part.

Card, Don H.↗

DOE OSTI2024

Within‐field soil moisture variability and time‐invariant spatial structures of agricultural fields in the US Midwest

Abstract Understanding soil moisture variability and estimating high‐resolution soil moisture at subfield to field scales is critical for agricultural research and applications. However, systematic investigation of subfield scale soil moisture variability over cropland is still lacking from both measurement and satellite remote sensing. In this study, we aim to investigate (1) the characteristics of within‐field soil moisture distribution over typical cropland in the US Midwest and (2) the capabilities of satellite remote sensing in capturing the spatiotemporal variabilities of soil moisture at subfield scale. Specifically, we conducted soil moisture field experiments in three typical commercial agricultural fields (∼85 acres per field) in central Illinois, representing typical commercial farmlands in the US Midwest, and compared the soil moisture measurements with satellite remote sensing data from optical and active microwave sensors. In each field, dense soil moisture samples (spaced at 50–60 m) were obtained for two dry down events in May and July 2021, and multiple long‐term soil moisture stations were installed. We found prominent time‐invariant spatial structures of soil moisture at within‐field scales both during the dry down period and over longer time scales, and the stability is minimally affected by plant water use during the growing season. Comparing the field campaign measurements with satellite remote sensing data, we found that surface reflectance of shortwave infrared bands, such as SWIR1 (1610 nm) from Sentinel‐2, can capture relative surface soil moisture patterns at within‐field scales, but their relationships with soil moisture are field specific. These findings and the improved understanding of within‐field soil moisture dynamics could potentially help future research on high‐resolution soil moisture estimation with multi‐source remote sensing data.

Yang, Yi↗

NASA NTRS1992

Assessing spatial and seasonal variations in grasslands with spectral reflectances from a helicopter platform

The helicopter system data acquisition technique has shown to be a viable means of gathering surface data with spectral detail adequate for intersite, intrasite, and temporal characterizations and for assessing temporal and spatial variability throughout the FIFE 1987 IFCs. The successful employment of nadir measurements for grassland assessments is notable given the reflectance anisotropy (Middleton, 1992). Though only five sites were repetitively observed, the conclusions reached from this particular sample of sites agree well with assessments from other data sources (Sellars et al., 1990 and Kittel et al., 1990).

Walthall, Charles L.↗