Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Designing Allosteric Control into Enzymes by Chemical Rescue of Structure

Ligand-dependent activity has been engineered into enzymes for purposes ranging from controlling cell morphology to reprogramming cellular signaling pathways. Where these successes have typically fused a naturally allosteric domain to the enzyme of interest, here we instead demonstrate an approach for designing a de novo allosteric effector site directly into the catalytic domain of an enzyme. This approach is distinct from traditional chemical rescue of enzymes in that it relies on disruption and restoration of structure, rather than active site chemistry, as a means to achieve modulate function. We present two examples, W33G in a {beta}-glycosidase enzyme ({beta}-gly) and W492G in a {beta}-glucuronidase enzyme ({beta}-gluc), in which we engineer indole-dependent activity into enzymes by removing a buried tryptophan side chain that serves as a buttress for the active site architecture. In both cases, we observe a loss of function, and in both cases we find that the subsequent addition of indole can be used to restore activity. Through a detailed analysis of {beta}-gly W33G kinetics, we demonstrate that this rescued enzyme is fully functionally equivalent to the corresponding wild-type enzyme. We then present the apo and indole-bound crystal structures of {beta}-gly W33G, which together establish the structural basis for enzyme inactivation and rescue. Finally, we use this designed switch to modulate {beta}-glycosidase activity in living cells using indole. Disruption and recovery of protein structure may represent a general technique for introducing allosteric control into enzymes, and thus may serve as a starting point for building a variety of bioswitches and sensors.

59 BASIC BIOLOGICAL SCIENCES↗

Local Modulation of Single-Atomic Mn Sites for Enhanced Ambient Ammonia Electrosynthesis

Rationally tuning the local structures of single-atomic active sites for the electrocatalytic N 2 reduction reaction (NRR) remains an urgent but worthwhile research topic. Herein, we accomplish the local modulation of single-atomic Mn sites and construct single Mn–O 3 N 1 sites anchored on porous carbon (Mn–O 3 N 1 /PC) by delicately controlling the Mn–O bonding conditions. Furthermore, the constructed structures are confirmed via the combination of atomic-scale imaging, Raman spectroscopy, synchrotron radiation-based soft and hard X-ray absorption spectroscopies, and X-ray photoelectron spectroscopy. The Mn–O 3 N 1 /PC catalyst yields an NH 3 yield rate of 66.41 μg h –1 mg cat. –1 (corresponding to 1.56 mg h –1 mg Mn –1 ) at -0.35 V versus reversible hydrogen electrode, which is about four times that on the control Mn–N 4 /PC catalyst. The enhanced NRR performance is ascribed to its unique geometry and electronic structures, which not only facilitate the adsorption and activation of the N 2 molecule but also lower the free energy change of the potential-determining step.

36 MATERIALS SCIENCE↗

H-terminated diamond field effect transistor with ferroelectric gate insulator

An H-terminated diamond field-effect-transistor (FET) with a ferroelectric vinylidene fluoride (VDF)-trifluoroethylene (TrFE) copolymer gate insulator was fabricated. The VDF-TrFE film was deposited on the H-terminated diamond by the spin-coating method and low-temperature annealing was performed to suppress processing damage to the H-terminated diamond surface channel layer. The fabricated FET structure showed the typical properties of depletion-type p-channel FET and showed clear saturation of the drain current with a maximum value of 50 mA/mm. The drain current versus gate voltage curves of the proposed FET showed clockwise hysteresis loops due to the ferroelectricity of the VDF-TrFE gate insulator, and the memory window width was 19 V, when the gate voltage was swept from 20 to −20 V. The maximum on/off current ratio and the linear mobility were 10{sup 8} and 398 cm{sup 2}/V s, respectively. In addition, we modulated the drain current of the fabricated FET structure via the remnant polarization of the VDF-TrFE gate and obtained an on/off current ratio of 10{sup 3} without applying a DC gate voltage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Apo raver1 structure reveals distinct RRM domain orientations

Raver1 is a multifunctional protein that modulates both alternative splicing and focal adhesion assembly by binding to the nucleoplasmic splicing repressor polypyrimidine tract protein (PTB) or to the cytoskeletal proteins vinculin and {alpha}-actinin. The amino-terminal region of raver1 has three RNA recognition motif (RRM1, RRM2, and RRM3) domains, and RRM1 interacts with the vinculin tail (Vt) domain and vinculin mRNA. We previously determined the crystal structure of the raver1 RRM1-3 domains in complex with Vt at 2.75 {angstrom} resolution. Here, we report crystal structure of the unbound raver1 RRM1-3 domains at 2 {angstrom} resolution. The apo structure reveals that a bound sulfate ion disrupts an electrostatic interaction between the RRM1 and RRM2 domains, triggering a large relative domain movement of over 30{sup o}. Superposition with other RNA-bound RRM structures places the sulfate ion near the superposed RNA phosphate group suggesting that this is the raver1 RNA binding site. While several single and some tandem RRM domain structures have been described, to the best of our knowledge, this is the second report of a three-tandem RRM domain structure.

59 BASIC BIOLOGICAL SCIENCES↗

Cryo-EM structure of a methanogen nitrogenase-PII protein supercomplex

Abstract Nitrogenases are metalloenzymes that catalyze the reduction of atmospheric dinitrogen to ammonia, sustaining the global nitrogen cycle. While bacterial nitrogenase has been extensively characterized, the architecture and regulation of archaeal nitrogenases remain unknown despite longstanding evidence of nitrogen fixation in methanogens. Here we report a 3.1 Å cryo-electron microscopy structure of a native nitrogenase–PII protein supercomplex from Methanosarcina acetivorans. The structure reveals an unprecedented assembly of three NifDK heterotetramers bridged by six NifI1,2 heterotrimeric PII complexes, which sterically block NifH association and lock the enzyme in an inactive state. The NifI complexes display asymmetric binding of ADP and 2-oxoglutarate, coupling nitrogenase inhibition directly to cellular energy and nitrogen status. Addition of 2-oxoglutarate and ATP releases the NifI complexes, stimulating a threefold increase in NifDK activity in vitro. This higher-order architecture uncovers a previously unrecognized regulatory strategy in methanogens, in which PII proteins drive nitrogenase oligomerization to control activity. The discovery that nitrogenase activity may be modulated through direct assembly into higher-order structures opens new avenues for exploring nitrogenase evolution, regulation, and biotechnological applications. One sentence summary Discovery of a nitrogenase-PII protein supercomplex in methanogens, uncovering a metabolite-gated assembly mechanism for nitrogenase inhibition.

Nitrogenase, Electron Transfer, Methanogen↗

Indirect measurements of slow modes in the Hermean magnetosphere

The aim of this study is to simulate slow mode structures in the Hermean magnetosphere. We use the single fluid MHD code PLUTO and a multipolar expansion of the Northward displaced Hermean magnetic field, to perform simulations mimicking the solar wind and interplanetary magnetic field conditions during 08/09/2011 MESSERGER orbit, susceptible to cross a slow mode structure [F. Pantellini et al, PSS, 112, 1 (2015) and J. Varela et al, PSS, 125, 80 (2016)]. The simulation shows the presence of a slow mode structure nearby the North pole. The satellite trajectory crosses the slow mode compressional front, although the region with the largest pressure and magnetic field lines bending is located Northernmost. The comparison with the MESSENGER data shows a decrease of the magnetic field module in the trajectory region where the slow mode structure is predicted by the simulation. Further analysis of the plasma density measurements by MESSENGER Fast Imaging Plasma Spectrometer are required to confirm the presence of the slow mode structure.

Filippo, Pantellini↗

Facet-dependent structure and dissociation of water at pristine IrO 2 /water interfaces

Understanding the microscopic structure of water at metal oxide interfaces is crucial for advancing electrocatalysis. IrO 2 , specifically, has shown exceptional activity for electrochemical water oxidation, but we currently lack a fundamental understanding of how the surface structure of IrO 2 impacts water reactivity. In this work, we developed a machine learning potential trained to first-principles accuracy for modeling IrO 2 /water interfaces across different facets: (110), (100), (101), and (001). Using extensive machine learning molecular dynamics simulations, we investigated the spontaneous dissociation of water molecules at these interfaces. Our results reveal a distinct dissociation probability trend: (110) > (100) ≈ (101) > (001), which we attribute primarily to the reaction thermodynamics of surface water dissociation. A strong correlation is observed between the surface Ir–O bond distances and the dissociation probabilities, highlighting the role of surface geometry in modulating reactivity. As a consequence, the interfacial solvation structures and hydrogen bonding environments are dynamically tuned by the varying water dissociation capabilities across facets. This work elucidates how water dissociation energetics depend on surface orientation and interfacial structure, offering atomistic insights into manipulating reaction chemistry at electrocatalytic interfaces.

organic↗

Investigation on cloud vertical structures based on Ka-band cloud radar observations at Wuhan in Central China

Based on vertically pointing observations of Ka-band frequency-modulated continuous millimeter wave cloud radar (MMCR) in 2020, we investigate cloud vertical structures at Wuhan in central China. Case comparison indicates that the cloud top locations in the MMCR observation are largely consistent with those in satellite data. The precipitation has the occurrence frequency of 9.5% over the year, with the maximum value of 16.3% in July and the submaximal value of 14.7% in January, showing the significant influences of monsoons on precipitation at Wuhan. As the humid, cloudy and rainy climate, the probability of precipitation and non-precipitation clouds increases gradually from 53.9% in January to a large value of 71.5% in July. The non-precipitation clouds have the probability of 44.5% in the year, with two prominent peaks at the reflectivities of -35 to -30 dBZ around 12 km in summer and - 37– -32 dBZ around 10 km in spring. The cloud top can reach the heights of 14.49, 16.62, 13.38 and 11.73 km from spring to winter, respectively. The monthly mean cloud layer thickness is the largest (2.18 km) in May and September, and the smallest (1.36 km) in November. The seasonally averaged base and top heights and thickness of clouds have small diurnal variations. The high cloud is predominant in the warm months from May to September, and in the other cool months, the middle cloud has the most fraction. The quantitative investigation of clouds is helpful in improving the cloud parameterization in climate models.

54 ENVIRONMENTAL SCIENCES↗

Intensity-dependent interference effect in high-order harmonic generation from aligned H{sub 2}{sup +} molecules

Based on the nonperturbative quantum scattering theory of high-order harmonic generation (HHG) and using the linear combination of atomic orbitals theory of molecular orbitals, we derive the HHG rate formula for molecules. Employing the formula, we study the intensity dependence of the interference effect induced by the molecular structure. We find that the molecular HHG was modulated by the interference not only in the recombination process but also in the ionization process. The location of the interference minimum in HHG shifts to higher energy by a quantity of the ponderomotive energy as the laser intensity increases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

(GeTe){sub n}SbInTe{sub 3} (n≤3)—Element distribution and thermal behavior

Antimony in germanium antimony tellurides (GeTe){sub n}(Sb{sub 2}Te{sub 3}) can be substituted by indium. Homogeneous bulk samples of GeSbInTe{sub 4} (R3-bar m, Z=3, a=4.21324(5) Å, c=41.0348(10) Å) and Ge{sub 2}SbInTe{sub 5} (P3-bar m1, Z=1, a=4.20204(6) Å, c=17.2076(4) Å) were obtained; their structures were refined with the Rietveld method. Single-crystal X-ray diffraction using synchrotron radiation at the K edges of Sb and Te (exploiting anomalous dispersion) yields precise information on the element distribution in the trigonal layered structure of Ge{sub 3}SbInTe{sub 6} (R3-bar m, Z=3, a=4.19789(4) Å, c=62.1620(11) Å). The structure is characterized by van der Waals gaps between distorted rocksalt-type slabs of alternating cation and anion layers. The cation concentration is commensurately modulated with Sb preferring the positions near the gaps. In contrast to unsubstituted Ge{sub 3}Sb{sub 2}Te{sub 6}, quenching the NaCl-type high-temperature phase (stable above ∼510 °C) easily yields a pseudocubic modification that is metastable at ambient conditions. Temperature-dependent powder diffraction reveals a broader stability range of the cubic high-temperature modification of Ge{sub 3}SbInTe{sub 6} compared to the ternary phases. In-containing samples partially decompose at ca. 300 °C but become homogeneous again when the high-temperature phase is formed. - Graphical abstract: Crystal structure of 33R-Ge{sub 3}SbInTe{sub 6} as determined by resonant X-ray diffraction, one example of the (GeTe){sub n}SbInTe{sub 3} series of compounds investigated. - Highlights: • The new compounds 21R-GeSbInTe{sub 4}, 9P-Ge{sub 2}SbInTe{sub 5} and 33R-Ge{sub 3}SbInTe are described. • The element distribution in 33R-Ge{sub 3}SbInTe{sub 6} was determined by resonant scattering. • The cation concentration in the crystal structure is strongly modulated. • The Sb substitution by In has a significant impact on phase transitions. • Results may be relevant for thermoelectrics and thin-film phase-change materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plant-Level Modeling and Simulation of Used Nuclear Fuel Dissolution

Plant-level modeling and simulation of a used nuclear fuel prototype dissolver is presented. Emphasis is given in developing a modeling and simulation approach to be explored by other processes involved in the recycle of used fuel. The commonality concepts presented in a previous communication were used to create a model and realize its software module. An initial model was established based on a theory of chemical thermomechanical network transport outlined previously. A software module prototype was developed with the required external behavior and internal mathematical structure. Results obtained demonstrate the generality of the design approach and establish an extensible mathematical model with its corresponding software module for a wide range of dissolvers. Scale up numerical tests were made varying the type of used fuel (breeder and light-water reactors) and the capacity of dissolution (0.5 t/d to 1.7 t/d). These tests were motivated by user requirements in the area of nuclear materials safeguards. A computer module written in high-level programing languages (MATLAB and Octave) was developed, tested, and provided as open-source code (MATLAB) for integration into the Separations and Safeguards Performance Model application in development at Sandia National Laboratories. The modeling approach presented here is intended to serve as a template for a rational modeling of all plant-level modules. This will facilitate the practical application of the commonality features underlying the unifying network transport theory proposed recently. In addition, by example, this model describes, explicitly, the needed data from sub-scale models, and logical extensions for future model development. For example, from thermodynamics, an off-line simulation of molecular dynamics could quantify partial molar volumes for the species in the liquid phase; this simulation is currently at reach for high-performance computing. From fluid mechanics, a hold-up capacity function is needed for the dissolver device; this simulation is currently at reach for computational fluid mechanics given the existing CAD geometry. From chemical transport phenomena, a simulation of the particle-scale dissolution front is needed to derive an improved solid dissolution kinetics law by predicting the local surface area change; an example was provided in this report. In addition, the associated reaction mechanisms for dissolution are presently largely untested and simplified, hence even a parallel experimental program in reaction kinetics is needed to support modeling and simulation efforts. Last but not least, a simple account of finite rates of solid feed and transfer can be readily introduced via a coupled delayed model. These are some of the theoretical benefits of a rational plant-level modeling approach which guides the development of smaller length and time scale modeling. Practical, and other theoretical benefits have been presented on a previous report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Spatiotemporal control of laser intensity through cross-phase modulation

Spatiotemporal pulse shaping provides control over the trajectory and range of an intensity peak. While this control can enhance laser-based applications, the optical configurations required for shaping the pulse can constrain the transverse or temporal profile, duration, or orbital angular momentum (OAM). Here we present a novel technique for spatiotemporal control that mitigates these constraints by using a "stencil" pulse to spatiotemporally structure a second, primary pulse through cross-phase modulation (XPM) in a Kerr lens. The temporally shaped stencil pulse induces a time-dependent focusing phase within the primary pulse. This technique, the "flying focus X," allows the primary pulse to have any profile or OAM, expanding the flexibility of spatiotemporal pulse shaping for laser-based applications. As an example, simulations show that the flying focus X can deliver an arbitrary-velocity, variable-duration intensity peak with OAM over distances much longer than a Rayleigh range.

47 OTHER INSTRUMENTATION↗

Ligand placement based on prior structures: the guided ligand-replacement method

A new module, Guided Ligand Replacement (GLR), has been developed in Phenix to increase the ease and success rate of ligand placement when prior protein-ligand complexes are available. The process of iterative structure-based drug design involves the X-ray crystal structure determination of upwards of 100 ligands with the same general scaffold (i.e. chemotype) complexed with very similar, if not identical, protein targets. In conjunction with insights from computational models and assays, this collection of crystal structures is analyzed to improve potency, to achieve better selectivity and to reduce liabilities such as absorption, distribution, metabolism, excretion and toxicology. Current methods for modeling ligands into electron-density maps typically do not utilize information on how similar ligands bound in related structures. Even if the electron density is of sufficient quality and resolution to allow de novo placement, the process can take considerable time as the size, complexity and torsional degrees of freedom of the ligands increase. A new module, Guided Ligand Replacement (GLR), was developed in Phenix to increase the ease and success rate of ligand placement when prior protein–ligand complexes are available. At the heart of GLR is an algorithm based on graph theory that associates atoms in the target ligand with analogous atoms in the reference ligand. Based on this correspondence, a set of coordinates is generated for the target ligand. GLR is especially useful in two situations: (i) modeling a series of large, flexible, complicated or macrocyclic ligands in successive structures and (ii) modeling ligands as part of a refinement pipeline that can automatically select a reference structure. Even in those cases for which no reference structure is available, if there are multiple copies of the bound ligand per asymmetric unit GLR offers an efficient way to complete the model after the first ligand has been placed. In all of these applications, GLR leverages prior knowledge from earlier structures to facilitate ligand placement in the current structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A gated graph transformer for protein complex structure quality assessment and its performance in CASP15

Abstract Motivation Proteins interact to form complexes to carry out essential biological functions. Computational methods such as AlphaFold-multimer have been developed to predict the quaternary structures of protein complexes. An important yet largely unsolved challenge in protein complex structure prediction is to accurately estimate the quality of predicted protein complex structures without any knowledge of the corresponding native structures. Such estimations can then be used to select high-quality predicted complex structures to facilitate biomedical research such as protein function analysis and drug discovery. Results In this work, we introduce a new gated neighborhood-modulating graph transformer to predict the quality of 3D protein complex structures. It incorporates node and edge gates within a graph transformer framework to control information flow during graph message passing. We trained, evaluated and tested the method (called DProQA) on newly-curated protein complex datasets before the 15th Critical Assessment of Techniques for Protein Structure Prediction (CASP15) and then blindly tested it in the 2022 CASP15 experiment. The method was ranked 3rd among the single-model quality assessment methods in CASP15 in terms of the ranking loss of TM-score on 36 complex targets. The rigorous internal and external experiments demonstrate that DProQA is effective in ranking protein complex structures. Availability and implementation The source code, data, and pre-trained models are available at https://github.com/jianlin-cheng/DProQA.

59 BASIC BIOLOGICAL SCIENCES↗

Global Transformations for Legacy Parallel Applications via Structural Analysis and Rewriting

Performance and scalability optimization of large HPC applications is currently a labor-intensive, manual process with very low productivity. Major difficulties come from the disaggregated environment for HPC application development: the compiler is only involved in local decisions (core or multithreaded domain), while a library-based, communication-oriented programming model realizes whole-machine parallelism. Realizing any major global change in such a disaggregated environment is very difficult and involves changing large portions of the source code. We present semi-automated techniques, based on structural analysis and rewriting, for performing global transformations on an HPC application source code. We present two case studies using the Self-Consistent Field (SCF) standalone benchmark as well as the Coupled Cluster (CCSD) module (2.9 million lines of Fortran code), a key module of the NWChem computational chemistry application. We demonstrate how structural rewriting techniques can be used to automate transformations that affect multiple sections of the application's source code. We show that the transformations can be applied in a systematic fashion across the source code bases with minimal manual effort. These transformations improve the scalability of the SCF benchmark by more than two orders of magnitude and the performance of the full CCSD module by a factor of 4.0.

legacy parallel applications↗

Dimer Asymmetry and Light Activation Mechanism in Brucella Blue-Light Sensor Histidine Kinase

The ability to sense and respond to environmental cues is essential for adaptation and survival in living organisms. In bacteria, this process is accomplished by multidomain sensor histidine kinases that undergo autophosphorylation in response to specific stimuli, thereby triggering downstream signaling cascades. However, the molecular mechanism of allosteric activation is not fully understood in these important sensor proteins. Here, we report the full-length crystal structure of a blue light photoreceptor LOV histidine kinase (LOV-HK) involved in light-dependent virulence modulation in the pathogenic bacterium Brucella abortus. Joint analyses of dark and light structures determined in different signaling states have shown that LOV-HK transitions from a symmetric dark structure to a highly asymmetric light state. The initial local and subtle structural signal originated in the chromophore-binding LOV domain alters the dimer asymmetry via a coiled-coil rotary switch and helical bending in the helical spine. These amplified structural changes result in enhanced conformational flexibility and large-scale rearrangements that facilitate the phosphoryl transfer reaction in the HK domain.

59 BASIC BIOLOGICAL SCIENCES↗

Exactly solvable model of resonance tunneling of an electromagnetic wave in plasma containing short-scale inhomogeneities

Different variants of resonance tunneling of a transverse electromagnetic wave through a plasma layer containing short-scale (subwavelength) inhomogeneities, including evanescence regions to which approximate methods are inapplicable, are analyzed in the framework of an exactly solvable one-dimensional model. Complex plasma density profiles described by a number of free parameters determining the permittivity modulation depth, the characteristic scale lengths of plasma structures, their number, and the thickness of the inhomogeneous plasma layer are considered. It is demonstrated that reflection-free propagation of the wave incident on the layer from vacuum (the effect of wave-barrier transillumination) can be achieved for various sets of such structures, including plasma density profiles containing a stochastic component. Taking into account cubic nonlinearity, it is also possible to obtain an exact solution to the one-dimensional problem on the nonlinear transillumination of nonuniform plasma. In this case, the thicknesses of the evanescence regions decrease appreciably. The problem of resonance tunneling of electromagnetic waves through such barriers is of interest for a number of practical applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗