Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Investigation of size dependent structural and optical properties of thin films of CdSe quantum dots

Research highlights: {yields} CdSe q-dots have been synthesized using simple chemical synthesis route. {yields} Thin film of CdSe quantum dots exhibited self-organized growth. {yields} Size dependent blue shift observed in the absorption edge of CdSe nanocrystallites. {yields} PL emission band corresponds to band edge luminescence and defect luminescence. {yields} Organized growth led to enhancement in luminescence yield of smaller size Q-dots. -- Abstract: Cadmium selenide (CdSe) quantum dots were grown on indium tin oxide substrate using wet chemical technique for possible application as light emitting devices. The structural, morphological and luminescence properties of the as deposited thin films of CdSe Q-dot have been investigated, using X-ray diffraction, transmission electron microscopy, atomic force microscopy and optical and luminescence spectroscopy. The quantum dots have been shown to deposit in an organized array on ITO/glass substrate. The as grown Q-dots exhibited size dependent blue shift in the absorption edge. The effect of quantum confinement also manifested as a blue shift of photoluminescence emission. It is shown that the nanocrystalline CdSe exhibits intense photoluminescence as compared to the large grained polycrystalline CdSe films.

36 MATERIALS SCIENCE↗

Facile synthesis of SiO{sub 2} nanoparticles for biomedical applications

Silica nanoparticles (SiO{sub 2} NPs) for biomedical applications have been prepared by using a facile modified Stöber-synthesis. Potassium borohydride (KBH{sub 4}) has been introduced in the synthesis procedure in order to control NP size. Several samples have been prepared varying tetraethylorthosilicate (TEOS) concentration, and using different process conditions (temperature, reaction time and atmosphere). In order to study the influence of the process conditions on the NP size, morphology and properties, several characterization techniques were used. Size and morphology of the as-prepared SiO{sub 2} NPs have been studied by using Transmission Electron Microscope (TEM) and Dynamic Light Scattering (DLS) techniques. Structural characterization was carried out by X-ray powder diffraction. To investigate the SiO{sub 2} NP fluorescence emission properties the fluorescence spectroscopy was also used.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Porous graphitic carbon nitride nanosheets by pre-polymerization for enhanced photocatalysis

Highlights: • A porous g-C{sub 3}N{sub 4} nanosheet is synthesized by a simple pre-polymerization method. • A large surface area and pore volume are obtained. • Formation mechanism of the porous structure is discussed. • Photocatalytic hydrogen evolution and degradation performances are both enhanced. - Abstract: A facile and green method was developed to fabricate porous graphitic carbon nitride (g-C{sub 3}N{sub 4}) nanosheets by simply pre-polymerizing melamine at 350 °C for 2 h. A porous structure was formed in the resulted g-C{sub 3}N{sub 4} (CN-350). Consequently, the specific surface area and pore volume of CN-350 was greatly enhanced, resulting in superior performance in photocatalytic hydrogen evolution and dye degradation. The hydrogen evolution rate and degradation constant of CN-350 were 11.2 and 8.8 times higher than that of bulk g-C{sub 3}N{sub 4} under visible light irradiation. The porous structure not only provided CN-350 with abundant active catalytic sites and cross-plane diffusion channels to facilitate the charge and mass transportation, but also promoted the charge separation in the photocatalytic reaction. This work provided a promising method for mass-production of highly active and stable g-C{sub 3}N{sub 4}-based photocatalysts for environmental and energetic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dehydration, Dehydrogenation, and Condensation of Alcohols on Supported Oxide Catalysts Based on Cyclic (WO3)3 and (MoO3)3 Clusters

Supported early transition metal oxides have important applications in numerous catalytic reactions. In this article we review preparation and activity of well-defined model WO3 and MoO3 catalysts prepared via deposition of cyclic gas-phase (WO3)3 and (MoO3)3 clusters generated by sublimation of WO3 and MoO3 powders. Conversion of small aliphatic alcohols to alkenes, aldehydes/ketons, and ethers is employed to probe the structure-activity relationships on model WO3 and MoO3 catalysts ranging from unsupported (WO3)3 and (MoO3)3 clusters embedded in alcohol matrices, to (WO3)3 clusters supported on surfaces of other oxides, and epitaxial and nanoporous WO3 films. Detailed theoretical calculations reveal the underlying reaction mechanisms and provide insight into the origin of the differences in the WO3 and MoO3 reactivity. For the range of interrogated (WO3)3 they further shed light into the role structure and binding of (WO3)3 clusters with the support play in determining their catalytic activity.

Environmental Molecular Sciences Laboratory↗

Determination of Interlaminar Toughness of IM7/977-2 Composites at Temperature Extremes and Different Thicknesses

Composite materials are being used in the aerospace industry as a means of reducing vehicle weight. In particular, polymer matrix composites (PMC) are good candidates due to their high strength-to-weight and high stiffness-to-weight ratios. Future reusable space launch vehicles and space exploration structures will need advanced light weight composites in order to minimize vehicle weight while demonstrating robustness and durability, guaranteeing high factors of safety. In particular, the implementation of composite cryogenic propellant fuel tanks (cryotanks) for future reusable launch vehicles (RLVs) could greatly reduce the vehicle's weight versus identically sized cryotanks constructed of metallic materials. One candidate composite material for future cryotank designs is IM7/977-2, which is a graphite/epoxy system. A successful candidate must demonstrate reasonable structural properties over a wide range of temperatures. Since the matrix material is normally the weak link in the composite, tests that emphasize matrix-dominated behavior need to be conducted. Therefore, the objective of this work is to determine the mode I interlaminar fracture toughness of "unidirectional" 8-ply and 16-ply IM7/977-2 through experimental testing. Tests were performed at -196 degrees Celsius (-320 degrees Fahrenheit), 22 degrees Celsius (72 degrees Fahrenheit), 93 degrees Celsius (200 degrees Fahrenheit) and 160 degrees C (320 degrees Fahrenheit). Low temperature testing was completed while the specimen was submerged in a liquid nitrogen bath. High temperature testing was completed in a temperature-controlled oven.

Johnson, W. S.↗

Photocatalytic H{sub 2} production from spinels ZnGa{sub 2−x}Cr{sub x}O{sub 4} (0≤x≤2) solid solutions

Solid solutions of ZnGa{sub 2−x}Cr{sub x}O{sub 4} (0≤x≤2) were successfully prepared by solid state reactions. Introducing Cr into ZnGa{sub 2}O{sub 4} crystal structure significantly improves its light absorption and greatly enhances its photocatalytic activity. An optimized Cr content (x=1.5 for ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4}) was found for the solid solutions with the highest photocatalytic hydrogen production rate (~775 μmol/h). Compositional analysis suggests there is a strong enrichment of Cr at the surface of sample ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4} compared with other samples. Theoretical calculations suggest their electronic structures involve spin-polarized conduction band (CB) and valence band (VB) that are mainly composed of Cr 3d orbitals. The highest photocatalytic activity observed in ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4} is probably due to the higher Cr content at the surface that favors the Cr 3d orbital overlapping. - Graphical abstract: Electronic structure and density of states of ZnGa{sub 2}O{sub 4} after partially substituting Ga with Cr. - Highlights: • Complete solid solution can be formed between ZnGa{sub 2}O{sub 4} and ZnCr{sub 2}O{sub 4}. • Optical properties and catalytic activity are improved by adding Cr into ZnGa{sub 2}O{sub 4}. • An optimized Cr content exists for the highest activity. • Enrichment of Cr in the surface is beneficial for a better performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-scale 3D imaging of individual dopant atoms in an oxide semiconductor

The physical properties of semiconductors are controlled by chemical doping. In oxide semiconductors, small variations in the density of dopant atoms can completely change the local electric and magnetic responses caused by their strongly correlated electrons. In lightly doped systems, however, such variations are difficult to determine as quantitative 3D imaging of individual dopant atoms is a major challenge. We apply atom probe tomography to resolve the atomic sites that donors occupy in the small band gap semiconductor Er(Mn,Ti)O 3 with a nominal Ti concentration of 0.04 at. %, map their 3D lattice positions, and quantify spatial variations. Our work enables atomic-level 3D studies of structure-property relations in lightly doped complex oxides, which is crucial to understand and control emergent dopant-driven quantum phenomena.

36 MATERIALS SCIENCE↗

Detection of scintillation light in noble gases with wavelength-shifting optical fibers

Wavelength-shifting (WLS) techniques enable particle detectors based on noble gases, whose scintillation light is predominantly emitted in the vacuum-ultraviolet. We investigate WLS fibers coated with tetraphenyl butadiene (TPB) for scintillation light detection in gaseous xenon and argon at pressures up to 8.5 bar, motivated by future high-pressure xenon time-projection chambers of the NEXT program. Two detector configurations are studied: an elongated high-pressure vessel with four PTFE panels equipped with WLS fibers read by temperature-stabilized SiPMs, and a compact box-shaped detector operated at 1 bar Xe with WLS fibers read out by PMTs. Both operate with continuous gas purification. The detector response is characterized using cosmic muons and alpha particles from a $^{241}$Am source. With the SiPM setup, we measure a light collection efficiency (LCE) of ${1.18 \pm 0.01~\mathrm{(sta.)}~^{+0.07}_{-0.09}~\mathrm{(sys.)}~\%}$ for xenon and ${1.07 \pm 0.01~\mathrm{(sta.)}~^{+0.06}_{-0.08}~\mathrm{(sys.)}~\%}$ for argon. With PMT readout, we measure a LCE of ${0.45 \pm 0.01~\mathrm{(sta.)} \pm 0.05~\mathrm{(sys.)}~\%}$ in xenon, in agreement with the SiPM result once photon detection efficiency is accounted for. Average scintillation waveforms in xenon and argon are studied to assess the time structure of the emitted light. Cosmic-muon measurements yield a mean energy required to produce a scintillation photon $45\pm7~\mathrm{(sta.)}~^{+4}_{-5}~\mathrm{(sys.)}~\mathrm{eV}$ at 1.5 bar, in agreement with the literature. The results demonstrate that TPB-coated WLS fiber systems can reliably detect scintillation light in high-pressure gaseous noble detectors, with a LCE representing an upper limit for realistic large-scale TPCs, where additional photon losses from materials and fiber attenuation are expected.

Soleti, S. R. [Donostia Intl. Phys. Ctr., San Seba↗

The X-ray variability of AGN and the anomalous behavior of NGC 6814

The power spectra of the X-ray variable AGN are typically scale invariant with no characteristic timescale. The one strong exception to this is NGC 6814, where the EXOSAT data showed evidence for a periodic component at 12200 +/- 100 seconds. The power spectra of a GINGA lightcurve from this source, found using simulation techniques to account for the uneven sampling, also cannot be well fit by a single power law. A folded light curve analysis of GINGA data shows strong evidence for this periodic component. A second GINGA observation of this source taken one year later is consistent with the phenomena being completely periodic and phase coherent for 7 periods in the range of 12,110-12,145 seconds. Including the (optimistic) limits from the folding selects a period of 12130.39 +/- 0.05 seconds. Phase coherence is not maintained between this and the EXOSAT observations, as the structure of the folded light curves is very different. Thus the periodicity is long lived and stable, but phase coherence is only maintained on timescales of about 1 year.

Done, C.↗

Photon and carrier management design for nonplanar thin-film copper indium gallium selenide photovoltaics

Nonplanar structured photovoltaic absorber design has potential to achieve high solar cell efficiency with significantly reduced material use. We report optoelectronic simulations that highlight photon and generated carrier management opportunities for improvement of thin film Cu(In x Ga 1-x )Se 2 (CIGS) device performance. Structures realized via either self-assembly or patterning via nanoimprint lithography, and also a combination of both are predicted to exhibit significant increases in short circuit current density and open circuit voltage simultaneously. The structures investigated include: 1) self-assembled nonplanar structures that strongly scatter incident light and enhance carrier generation near regions of high electric potential, 2) lithographicallypatterned embedded periodic dielectric structures, 3) planar dielectric layers that separate the CIGS absorber from the molybdenum back-contact via reduced-area contacts that minimize optical and electronic losses, 4) a combination of these for combined effects. We find that the self-assembled nonplanar CIGS cells with 700 nm planar equivalent thickness, combined with dielectric separation layers yield increases in short circuit current density and open circuit voltage up to 3.4 mA cm -2 and 29 mV, respectively. The absolute efficiency increases from 15.4% to 18.1%, compared to the predicted efficiency for planar CIGS thin film cells of equivalent thickness. The addition of a single layer MgF 2 anti-reflection coating brings the maximum predicted efficiency up to 19.7% for randomly textured devices.

14 SOLAR ENERGY↗

Luminescence Imager for Exploration

The Luminescence Imager for Exploration (LIfE) is an automated bright-field and epifluorescence microscope designed identify and characterize morphological and textural indicators of life and to identify, resolve, and characterize microscale structural features indicative of cells and cell fragments. To achieve these objectives, LIfE uses visible light to image organic and inorganic structures with submicron resolution, combined with, deep ultraviolet (DUV), ultraviolet (UV), and visible-light excitation for autofluorescence characterization of sample organic and mineral content. LIfE also autonomously manipulates samples to stain key molecular and structural indicators of microbial life (e.g., proteins, lipids, and nucleic acids) for fluorescence microscopic detection.

R C Quinn↗

Doping evolution of the electronic structure in the single-layer cuprates Bi2Sr2&#8722xLaxCuO6 delta: Comparison with other single-layer cuprates

We have performed angle-resolved photoemission and core-level x-ray photoemission studies of the single-layer cuprate Bi{sub 2}Sr{sub 2-x}La{sub x}CuO{sub 6+{delta}} (Bi2201) and revealed the doping evolution of the electronic structure from the lightly-doped to optimally-doped regions. We have observed the formation of the dispersive quasi-particle band, evolution of the Fermi 'arc' into the Fermi surface and the shift of the chemical potential with hole doping as in other cuprates. The doping evolution in Bi2201 is similar to that in Ca{sub 2-x}Na{sub x}CuO{sub 2}Cl{sub 2} (Na-CCOC), where a rapid chemical potential shift toward the lower Hubbard band of the parent insulator has been observed, but is quite different from that in La{sub 2-x}Sr{sub x}CuO{sub 4} (LSCO), where the chemical potential does not shift, yet the dispersive band and the Fermi arc/surface are formed around the Fermi level already in the lightly-doped region. The (underlying) Fermi surface shape and band dispersions are quantitatively analyzed using tightbinding fit, and the deduced next-nearest-neighbor hopping integral t also confirm the similarity to Na-CCOC and the difference from LSCO.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hybrid epoxy–acrylate resins for wavelength-selective multimaterial 3D printing

Structures in nature have evolved to combine hard and soft materials in precise 3D arrangements, which imbues bulk properties and functionality that remain elusive to mimic synthetically. However, the potential for biomimetic analogs to seamlessly interface hard materials with soft surfaces for applications ranging from robotics and sealants to medical devices (e.g., prosthetics and wearable health monitors) has driven the demand for innovative chemistries and manufacturing approaches. Herein, we unveil a liquid resin for rapid, high resolution digital light processing (DLP) 3D printing of multimaterial objects with an unprecedented combination of strength, elasticity, and resistance to aging. Two enabling discoveries are the use of a covalently bound (hybrid) epoxy-acrylate monomer that precludes plasticization of soft domains and a wavelength-selective photosensitizer that accelerates cationic curing for hard domains. Using dual projection for multicolor DLP 3D printing (UV and violet light), several bioinspired metamaterial structures are fabricated, including one with hard springs embedded in a soft cylinder to adjust compressive behavior and a detailed knee joint featuring “bones” and “ligaments” for smooth motion. Lastly, the application of this system to facilitate selective stretching for electronic devices is demonstrated with a proof-of-concept device.

36 MATERIALS SCIENCE↗

Electronic structure in the transition metal block and its implications for light harvesting

Transition metal–based chromophores play a central role in a variety of light-enabled chemical processes ranging from artificial solar energy conversion to photoredox catalysis. The most commonly used compounds include elements from the second and third transition series (e.g., ruthenium and iridium), but their Earth-abundant first-row analogs fail to engage in photoinduced electron transfer chemistry despite having virtually identical absorptive properties. This disparate behavior stems from fundamental differences in the nature of 3d versus 4d and 5d orbitals, resulting in an inversion in the compounds’ excited-state electronic structure and undermining the ability of compounds with first-row elements to engage in photoinduced electron transfer. This Review will survey the key experimental observations establishing this difference in behavior, discuss the underlying reasons for this phenomenon, and briefly summarize efforts that are currently under way to alter this paradigm and open the door to new opportunities for using Earth-abundant materials for photoinduced electron transfer chemistries.

Science & Technology - Other Topics↗

Apparatus, system, and method for providing fabric-elastomer composites as pneumatic actuators

Soft pneumatic actuators based on composites consisting of elastomers with embedded sheet or fiber structures (e.g., paper or fabric) that are flexible but not extensible are described. On pneumatic inflation, these actuators move anisotropically, based on the motions accessible by their composite structures. They are inexpensive, simple to fabricate, light in weight, and easy to actuate. This class of structure is versatile: the same principles of design lead to actuators that respond to pressurization with a wide range of motions (bending, extension, contraction, twisting, and others). Paper, when used to introduce anisotropy into elastomers, can be readily folded into three-dimensional structures following the principles of origami; these folded structures increase the stiffness and anisotropy of the elastomeric actuators, while keeping them light in weight.

36 MATERIALS SCIENCE↗

Self-Assembled Light-Harvesting System from Chromophores in Lipid Vesicles

Lipid vesicles are used as the organizational structure of self-assembled light-harvesting systems. Following analysis of 17 chromophores, six were selected for inclusion in vesicle-based antennas. The complementary absorption features of the chromophores span the near-ultraviolet, visible, and near-infrared region. Although the overall concentration of the pigments is low (~1 μ M for quantitative spectroscopic studies) in a cuvette, the lipid-vesicle system affords high concentration (≥10 mM) in the bilayer for efficient energy flow from donor to acceptor. Energy transfer was characterized in 13 representative binary mixtures using static techniques (fluorescence–excitation versus absorptance spectra, quenching of donor fluorescence, modeling emission spectra of a mixture versus components) and time-resolved spectroscopy (fluorescence, ultrafast absorption). Binary donor–acceptor systems that employ a boron-dipyrrin donor (S 0 ↔ S 1 absorption/emission in the blue-green) and a chlorin or bacteriochlorin acceptor (S 0 ↔ S 1 absorption/emission in the red or near-infrared) have an average excitation-energy-transfer efficiency (Φ EET ) of ~50%. Binary systems with a chlorin donor and a chlorin or bacteriochlorin acceptor have Φ EET ~ 85%. The differences in Φ EET generally track the donor-fluorescence/acceptor-absorption spectral overlap within a dipole–dipole coupling (Förster) mechanism. Substantial deviation from single-exponential decay of the excited donor (due to the dispersion of donor–acceptor distances) is expected and observed. The time profiles and resulting Φ EET are modeled on the basis of (Förster) energy transfer between chromophores relatively densely packed in a two-dimensional compartment. Initial studies of two ternary and one quaternary combination of chromophores show the enhanced spectral coverage and energy-transfer efficacy expected on the basis of the binary systems. Collectively, this approach may provide one of the simplest designs for self-assembled light-harvesting systems that afford broad solar collection and efficient energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The x ray variability of AGN and the anomalous behavior of NGC6814

The power spectra of the X-ray variable AGN are typically scale invariant with no characteristic timescale. The one strong exception to this is NGC6814, where the EXOSAT data showed evidence for a periodic component at 12200 plus or minus 100 seconds. The power spectra of a GINGA lightcurve from this source, found using simulation techniques to account for the uneven sampling, also cannot be well fit by a single power law. A folded light curve analysis of the GINGA data shows a strong peak in the variance, indicative of a periodic component, at 12130.9 plus or minus 0.6 seconds. A second GINGA observation of this source taken one year later is consistent with the periodicity maintaining phase coherence for 7 periods in the range of 12110-12145 seconds. Including the limits from the folding selects a period of 12130.39 plus or minus 0.05 seconds. Phase coherence is not maintained between this and the EXOSAT observations, as the structure of the folded light curves is very different. Thus the periodicity is long lived and stable, but phase coherence is only maintained on timescales of approximately 1 year.

Done, C.↗

Hepatocyte-derived cultured cells with unusual cytoplasmic keratin-rich spheroid bodies

Cytoplasmic inclusions are found in a variety of diseases that are characteristic morphological features of several hepatic, muscular and neurodegenerative disorders. They display a predominantly filamentous ultrastructure that is also observed in malignant rhabdoid tumor (MRT). A cellular clone containing an intracytoplasmic body was isolated from hepatocyte cell culture, and in the present study we examined whether this body might be related or not to Mallory-Denk body (MDB), a well characterized intracytoplasmic inclusion, or whether this cellular clone was constituted by malignant rhabdoid tumor cells. The intracytoplasmic body was observed in electron microscopy (EM), confocal immunofluorescence microscopy and several proteins involved in the formation of its structure were identified. Using light microscopy, a spheroid body (SB) described as a single regular-shaped cytoplasmic body was observed in cells. During cytokinesis, the SB was disassembled and reassembled in a way to reconstitute a unique SB in each progeny cell. EM examination revealed that the SB was not surrounded by a limiting membrane. However, cytoplasmic filaments were concentrated in a whorled array. These proteins were identified as keratins 8 and 18 (K8/K18), which formed the central core of the SB surrounded by a vimentin cage-like structure. This structure was not related to Mallory-Denk body or aggresome since no aggregated proteins were located in SB. Moreover, the structure of SB was not due to mutations in the primary sequence of K8/K18 and vimentin since no difference was observed in the mRNA sequence of their genes, isolated from Huh-7 and Huh-7w7.3 cells. These data suggested that cellular factor(s) could be responsible for the SB formation process. Aggregates of K18 were relocated in the SB when a mutant of K18 inducing disruption of K8/K18 IF network was expressed in the cellular clone. Furthermore, the INI1 protein, a remodeling-chromatin factor deficient in rhabdoid cells, which contain a spheroid perinuclear inclusion body, was found in our cellular clone. In conclusion, our data suggest that Huh-7w7.3 cells constitute an excellent model for determining the cellular factor(s) involved in the process of spheroid perinuclear body formation.

60 APPLIED LIFE SCIENCES↗