Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Straintronics with single-layer MoS 2 : A quantum Monte Carlo study

Using state-of-the-art quantum Monte Carlo (QMC) methods, we study straintronic properties of a single MoS 2 monolayer. 2D MoS 2 is a quintessential straintronic material for which many experiments have been performed. First, we determine the equilibrium atomic structure which is not known experimentally and is strictly needed to correctly determine the straintronic properties. That enables us to precisely analyze the quasiparticle band gaps for any applied biaxial strain, which we describe by a bivariate paraboloid function of lattice constant and internal structural parameter. Using the fixed-node QMC calculations fitted by analytical formulas, we localize the following excited state crossings between the direct, K → K , and indirect Γ → X and K → K /2 excitations. Based on this highly accurate many-body treatment, we predict a gauge factor of 136 meV/% for the K → K transition and a fairly narrow window of ≈ 2.8 % from compressive to mildly tensile strains, accounting for only ≈ 0.3 eV band gap change maintaining the direct character of the gap. Consequently, we suggest that, compared to other 2D materials, such as phosphorene, there is only a limited straintronic tuneability in this material often studied for its straintronic properties. QMC results are compared to results of standard DFT modeling, which reveal insights into the corresponding inaccuracies and therefore open a window for educated use of rapid DFT approaches. Published by the American Physical Society 2024

Huang, Y.↗

Flash Lamp Integrating Sphere Technique for Measuring the Dynamic Reflectance of Shocked Materials

Accurate reflectance (R) measurements of metals undergoing shock wave compression can benefit high pressure research in several ways. For example, pressure dependent reflectance measurements can be used to deduce electronic band structure, and discrete changes with pressure or temperature may indicate the occurrence of a phase boundary. Additionally, knowledge of the wavelength dependent emissivity (1 -R, for opaque samples) of the metal surface is essential for accurate pyrometric temperature measurement because the radiance is a function of both the temperature and emissivity. We have developed a method for measuring dynamic reflectance in the visible and near IR spectral regions with nanosecond response time and less than 1.5% uncertainty. The method utilizes an integrating sphere fitted with a xenon flash-lamp illumination source. Because of the integrating sphere, the measurements are insensitive to changes in surface curvature or tilt. The in-situ high brightness of the flash-lamp exceeds the sample’s thermal radiance and also enables the use of solid state detectors for recording the reflectance signals with minimal noise. Using the method, we have examined the dynamic reflectance of gallium and tin subjected to shock compression from high explosives. The results suggest significant reflectance changes across phase boundaries for both metals. We have also used the method to determine the spectral emissivity of shock compressed tin at the interface between tin and a LiF window. The results were used to perform emissivity corrections to previous pyrometry data and obtain shock temperatures of the tin/LiF interface with uncertainties of less than 2%.

Stevens, Gerald↗

Search for New Half-Metallic Ferromagnets in Quaternary Diamond-Like Compounds I–II{sub 2}–III–VI{sub 4} and I{sub 2}–II–IV–VI{sub 4} (I = Cu; II = Mn, Fe, Co; III = In; IV = Ge, Sn; VI = S, Se, Te)

The structural, electronic, and magnetic properties I–II{sub 2}–III–VI{sub 4} and I{sub 2}–II–IV–VI{sub 4} are investigated firstly by using the first-principles calculations. The investigation was done using the ab initio full-potential linearized augmented plane wave (FPLAPW) method where the exchange–correlation potential was calculated with the frame of GGA and GGA+U. The theoretically predicted lattice parameters for I–II{sub 2}–III–VI{sub 4} and I{sub 2}–II–IV–VI{sub 4} alloys are in good agreement with existing experimental measurements. The possibility of half-metallic ferromagnetism in I–II{sub 2}–III–VI{sub 4} and I{sub 2}–II–IV–VI{sub 4} (I = Cu; II = Mn, Fe, Co; III = In; IV = Ge, Sn; VI = S, Se, Te) was analyzed by electronic band structure and density of states calculations. We found that Cu{sub 2}CoGeS{sub 4}, Cu{sub 2}FeGeS{sub 4}, Cu{sub 2}FeSnS{sub 4}, and CuMn{sub 2}InSe{sub 4} compounds exhibit a complete half-metallic characteristic with a total spin moment of 3.00, 4.00, 4.00, and 10.00 μ{sub B} and direct band gap of (Eg ↑ = 0.63 eV), (Eg ↑ = 0.90 eV), (Eg ↑ = 0.31 eV), and (Eg ↓ = 1.10 eV), respectively. These results may be of interest for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revisiting the K-edge X-ray absorption fine structure of Si, Ge–Si alloys, and the isoelectronic series: CuBr, ZnSe, GaAs, and Ge

Extended X-ray absorption fine structure (EXAFS) has evolved into an unprecedented local-structure technique that is routinely used to study materials’ problems in the biological, chemical, and physical sciences. Like many other experimental techniques, EXAFS also requires that several key atomic parameters must be known a priori before structural information can be quantitatively determined. Utilizing current analytical methods, we revisit the isoelectronic series CuBr, ZnSe, GaAs, and Ge originally studied by Stern et al. during the early development of EXAFS. We demonstrate that the ab initio EXAFS code FEFF accurately predicts the atomic phase shifts and backscattering amplitudes that are primarily functions of the sum of atomic numbers Z along an EXAFS scattering path. We also investigate quantitative fitting and first- and second-shell phase transferability together with problems that arise if a backscattering atom is identified incorrectly in an EXAFS fitting model. Features in the near-edge region, on the other hand, are shown to require a comprehensive treatment of the band structure and density-of-states, including effects of the screened Coulomb interaction between the photoelectron and core hole. Here, we demonstrate that the Bethe–Salpeter equation (BSE) accurately captures the NEXAFS (or XANES) portion of the spectrum for the isoelectronic series in addition to Si and Ge–Si alloys, including within a few eV of the absorption edge, where band structure and excitonic effects are most important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and optical properties of the LiCdX (X = N, P, As and Sb) filled-tetrahedral compounds with the Tran–Blaha modified Becke–Johnson density functional

Highlights: • Electronic and optical properties of the LiCdX compounds have been predicted. • Tran–Blaha-modified Becke–Johnson functional significantly improves the band gap. • We predict a direct band gap in all of the considered LiCdX compounds. • Origin of the peaks in the optical spectra is determined. - Abstract: The structural, electronic and optical properties of the LiCdN, LiCdP, LiCdAs and LiCdSb filled-tetrahedral compounds have been explored from first-principles. The calculated structural parameters are consistent with the available experimental results. Since DFT with the common LDA and GGA underestimates the band gap, we use a new developed functional able to accurately describe the electronic structure of semiconductors, namely the Tran–Blaha-modified Becke–Johnson potential. The four investigated compounds demonstrate semiconducting behavior with direct band gap ranging from about 0.32 to 1.65 eV. The charge-carrier effective masses are evaluated at the topmost valence band and at the bottommost conduction band. The evolution of the value and nature of the energy band gap under pressure effect is also investigated. The frequency-dependent complex dielectric function and some macroscopic optical constants are estimated. The microscopic origins of the structures in the optical spectra are determined in terms of the calculated energy band structures.

36 MATERIALS SCIENCE↗

Facile synthesis of self-assembled SnO nano-square sheets and hydrogen absorption characteristics

Graphical abstract: Display Omitted Highlights: ► Self-assembled stannous oxide (SnO) 2D nano-square sheets have been synthesized. ► The average size of the nano-square sheets is about 200–400 nm. ► Direct optical band gap of 3.16 eV was acquired by using Davis–Mott model. ► The hydrogen absorption capacity of as-synthesized material was 1.194 wt.% comparatively good. -- Abstract: Stannous oxide is an important functional material which contributes to a wide range of applications in energy storage and optoelectronic devices. In the present study, the single crystalline self-assembled stannous oxide (SnO) 2D nano-square sheets have been synthesized with template-free hydrothermal growth method. The morphology, composition and structure were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) with selected area electron diffraction (SAED), energy dispersive X-ray (EDX), X-ray diffraction (XRD) and Raman spectroscopy, respectively. FESEM results have illustrated that the size of self-assembled 3D hierarchical polygon-shape structure of SnO is in the range of 8–12 μm and the average size of the nano-square sheets is about 100 nm. X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns have revealed that the prepared SnO nano-square sheets exist in single-crystalline nature. Two Raman modes A{sub 1g} = 211 cm{sup −1} and B{sub 1g} = 113 cm{sup −1} were observed by Raman spectroscopy, which is consistent with nano tetragonal phase SnO. Furthermore, the chemical valence of Sn and relative atomic composition of as-prepared SnO have been confirmed by X-ray photoelectron spectroscopy (XPS). Ultraviolet–visible–near infrared spectrophotometry was used to study the transmittance behavior of SnO nano-structures and direct optical band gap of 3.16 eV was acquired by using Davis–Mott model. The first ever study on hydrogen absorption characteristics of SnO nano-square sheets performed at 373 K shows good absorption capacity of 1.194 wt.%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetics of intrinsic defects and their complexes in ZnO investigated by density functional calculations

Formation energies of various intrinsic defects and defect complexes in ZnO have been calculated using a density-functional-theory-based pseudopotential all-electron method. The various defects considered are oxygen vacancy (V{sub O}), zinc vacancy (V{sub Zn}), oxygen at an interstitial site (O{sub i}), Zn at an interstitial site (Zn{sub i}), Zn at V{sub O} (Zn{sub O}), O at V{sub Zn}(O{sub Zn}), and an antisite pair (combination of the preceding two defects). In addition, defect complexes like (V{sub O}+Zn{sub i}) and Zn-vacancy clusters are studied. The Schokkty pair (V{sub O}+V{sub Zn}) and Frenkel pairs [(V{sub O}+O{sub i}) and (V{sub Zn}+Zn{sub i})] are considered theoretically for the first time. Upon comparing the formation energies of these defects, we find that V{sub O} would be the dominant intrinsic defect under both Zn-rich and O-rich conditions and it is a deep double donor. Both Zn{sub O} and Zn{sub i} are found to be shallow donors. The low formation energy of donor-type intrinsic defects could lead to difficulty in achieving p-type conductivity in ZnO. Defect complexes have charge transitions deep inside the band gap. The red, yellow, and green photoluminescence peaks of undoped samples can be assigned to some of the defect complexes considered. It is believed that the red luminescence originates from an electronic transition in V{sub O}, but we find that it can originate from the antisite Zn{sub O} defect. Charge density and electron-localization function analyses have been used to understand the effect of these defects on the ZnO lattice. The electronic structure of ZnO with intrinsic defects has been studied using density-of-states and electronic band structure plots. The acceptor levels introduced by V{sub Zn} are relatively localized, making it difficult to achieve p-type conductivity with sufficient hole mobility.

36 MATERIALS SCIENCE↗

Interfacial electronic structure at the CH{sub 3}NH{sub 3}PbI{sub 3}/MoO{sub x} interface

Interfacial electronic properties of the CH{sub 3}NH{sub 3}PbI{sub 3} (MAPbI{sub 3})/MoO{sub x} interface are investigated using ultraviolet photoemission spectroscopy and X-ray photoemission spectroscopy. It is found that the pristine MAPbI{sub 3} film coated onto the substrate of poly (3,4-ethylenedioxythiophene) poly(styrenesulfonate)/indium tin oxide by two-step method behaves as an n-type semiconductor, with a band gap of ∼1.7 eV and a valence band edge of 1.40 eV below the Fermi energy (E{sub F}). With the MoO{sub x} deposition of 64 Å upon MAPbI{sub 3}, the energy levels of MAPbI{sub 3} shift toward higher binding energy by 0.25 eV due to electron transfer from MAPbI{sub 3} to MoO{sub x}. Its conduction band edge is observed to almost pin to the E{sub F}, indicating a significant enhancement of conductivity. Meanwhile, the energy levels of MoO{sub x} shift toward lower binding energy by ∼0.30 eV, and an interface dipole of 2.13 eV is observed at the interface of MAPbI{sub 3}/MoO{sub x}. Most importantly, the chemical reaction taking place at this interface results in unfavorable interface energy level alignment for hole extraction. A potential barrier of ∼1.36 eV observed for hole transport will impede the hole extraction from MAPbI{sub 3} to MoO{sub x}. On the other hand, a potential barrier of ∼0.14 eV for electron extraction is too small to efficiently suppress electrons extracted from MAPbI{sub 3} to MoO{sub x}. Therefore, such an interface is not an ideal choice for hole extraction in organic photovoltaic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study on the bulk and (1 1 1) surface half-metallicity of KS and RbS in CsCl structure

Graphical abstract: Spin-polarized total and atomic DOS at S-(1 1 1) terminated slab and bulk in CsCl-type RbS. - Highlights: • The half metallic properties of CsCl-type RbS and KS have been studied. • The RbS's and KS's (1 1 1) slabs have been investigated. • Surface energy of RbS's and KS's (1 1 1) slabs are calculated. - Abstract: The electronic and magnetic properties of RbS and KS in CsCl structure have been investigated by using the full-potential local-orbital minimum-basis method. Calculating the relation between the total energies and lattice parameters for RbS and KS, we find out that the equilibrium lattice parameters are 4.02 Å and 3.84 Å for RbS and KS, respectively. According to our calculations in generalized gradient approximation approximation, both RbS and KS are half-metallic ferromagnets with the magnetic moments of 1 μ{sub B} per formula unit, and band gap of 4.287 eV for RbS and 4.395 eV for KS. We also have studied the electronic and magnetic properties of (1 1 1) surfaces of RbS and KS, and have found out that the half-metallicity of their bulk is preserved in all of those surfaces. Finally, through the calculations of formation energy of RbS and KS, it is found that their thin films are stable in the equilibrium conditions, and the Rb-terminated (1 1 1) slab of RbS and the K-terminated (1 1 1) slab of KS are more stable than their S-terminated (1 1 1) slabs. All of the above properties lead the compounds of RbS and KS in CsCl structure to be promising candidates for spintronic applications.

36 MATERIALS SCIENCE↗

Band offset between cubic GaN and AlN from intra- and interband spectroscopy of superlattices

By the analysis of intra- and intersubband transitions in GaN/AlN superlattices the band offset is determined experimentally. Superlattice structures with different period lengths were fabricated by plasma-assisted molecular beam epitaxy 3C-SiC substrates. The structural properties were studied by high resolution X-ray diffraction, revealing a high structural perfection of the superlattice region with several peaks in the X-ray spectra. Infrared absorbance spectroscopy revealed clear intrasubband transitions in the spectral region of 1.55 {mu}m measured at room temperature. Clear intersubband transitions were observed by photoluminescence at room temperature. These transition energies were compared to calculated energies using a 1D Poisson Schroedinger solver. For the calculations standard parameters for cubic GaN and AlN were used, while the band offset between GaN and AlN was varied. Optimal agreement between experimental and theoretical data was obtained for a band offset {Delta}E{sub C}:{Delta} E{sub V} of 55:45.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Covalently-Bonded Laminar Assembly of Van der Waals Semiconductors with Polymers: Toward High-Performance Flexible Devices

Van der Waals semiconductors (vdWS) offer superior mechanical and electrical properties and are promising for flexible microelectronics when combined with polymer substrates. However, the self-passivated vdWS surfaces and their weak adhesion to polymers tend to cause interfacial sliding and wrinkling, and thus, are still challenging the reliability of vdWS-based flexible devices. Here, in this study, an effective covalent vdWS–polymer lamination method with high stretch tolerance and excellent electronic performance is reported. Using molybdenum disulfide (MoS 2 ) and polydimethylsiloxane (PDMS) as a case study, gold–chalcogen bonding and mercapto silane bridges are leveraged. The resulting composite structures exhibit more uniform and stronger interfacial adhesion. This enhanced coupling also enables the observation of a theoretically predicted tension-induced band structure transition in MoS 2 . Moreover, no obvious degradation in the devices’ structural and electrical properties is identified after numerous mechanical cycle tests. This high-quality lamination enhances the reliability of vdWS-based flexible microelectronics, accelerating their practical applications in biomedical research and consumer electronics.

36 MATERIALS SCIENCE↗

Structural, Optical, Magnetic, and Dielectric Properties of Cr{sup 3+} Substituted Cobalt Aluminate Nanoparticles

The present study investigates the influence of Cr{sup 3+} substitution on structural, optical, dielectric, and magnetic properties of cobalt aluminates in the aluminates series CoAl{sub 2-x}Cr{sub x}O{sub 4}, 0.00 ≤ x ≤ 0.20. These series of nanoparticles are effectively synthesized using the co-precipitation method. The cubic spinel aluminate structure is confirmed by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopic measurements. Transmission electron microscopy (TEM) analysis shows the formation of spherical nanoparticles, which are homogeneous in shape and size. The optical properties of the prepared samples have been investigated by means of optical absorbance spectra. The optical band gap E{sub opt}{sup i} and Urbach energy E{sub u} are estimated. At room temperature, the magnetization of undoped CoAl{sub 2}O{sub 4} reveals a weak ferromagnetic behavior. This ferromagnetism is increased for the sample with x = 0.05, and the samples with higher Cr{sup 3+} content have a tendency to be superparamagnetic on account of the formation of single-domain particles as a consequence of small particle size. Real part of dielectric constant (ε{sup ′}), dielectric loss (tanδ), ac conductivity (σ{sub ac}), real part of impedance (Z{sup ′}), and imaginary part of impedance (Z{sup ″}) are analyzed as a function of frequency and Cr{sup 3+} content. The results show that the dielectric loss (tanδ), dielectric permittivity (ε{sup ′}), and ac conductivity (σ{sub ac}) decrease with the increase in Cr{sup 3+} content, x = 0.05, and then increase with a further increase in Cr{sup 3+} content. The increase in these parameters has been explained on the basis of the hopping mechanism. From the Cole–Cole diagram, the value of the relaxation time τ can be calculated and it has been found to increase with increasing the Cr{sup 3+} content. Actually, a high dielectric constant makes these materials good for energy storage at high frequencies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, thermodynamic and optical properties of MgF{sub 2} studied from first-principles theory

A detailed theoretical study of structural, electronic, elastic, thermodynamic and optical properties of rutile type MgF{sub 2} has been carried out by means of first-principles Density Functional Theory (DFT) calculations using plane wave pseudo-potentials within the local density approximation and generalized-gradient approximation for the exchange and correlation functionals. The calculated ground state properties and elastic constants agree quite well with experimental values. From the calculated elastic constants we conclude that MgF{sub 2} is relatively hard when compared to other alkaline-earth fluorides and ductile in nature. The thermodynamic properties such as heat capacity, entropy, free energy, phonon density of states and Debye temperatures are calculated at various temperatures from the lattice dynamical data obtained through the quasi-harmonic Debye model. From free energy and entropy it is found that the system is thermodynamically stable up to 1200 K. The imaginary part of the calculated dielectric function {epsilon}{sub 2}({omega}) could reproduce the six prominent peaks which are observed in experiment. From the calculated {epsilon}({omega}), other optical properties such as refractive index, reflectivity and electron energy-loss spectrum are obtained up to the photon energy range of 30 eV. -- Graphical abstract: The calculated imaginary part {epsilon}{sub 2}({omega}) of the complex dielectric function {epsilon}({omega}) of MgF{sub 2} as a function of photon energy is shown. The calculated {epsilon}{sub 2}({omega}) could reproduce the major peaks observed in experiment. All the peaks observed are corresponds to interband transitions from 'p' states of Fluorine in valence band to the 's' states of Mg in conduction band. Display Omitted Research highlights: > Structural and bonding properties. > Optical properties. > Single and polycrystalline elastic properties. > Thermodynamic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reconciling Work Functions and Adsorption Enthalpies for Implicit Solvent Models: A Pt (111)/Water Interface Case Study

Implicit solvent models are a computationally efficient method of representing solid/liquid interfaces prevalent in electrocatalysis, energy storage, and materials science. However, electronic structure changes induced at the metallic surface by the dielectric continuum are not fully understood. To address this, we perform DFT calculations for the Pt(111)/water interface, in order to compare Poisson–Boltzmann continuum solvation methods with ab initio molecular dynamics (AIMD) simulations of explicit solvent. We show that the implicit solvent cavity can be parametrized in terms of the electric dipole moment change at the equilibrated explicit Pt/water interface to obtain the potential of zero charge (PZC). We also compare the accuracy of aqueous enthalpies of adsorption of phenol on Pt(111) using geometry and charge density based dielectric cavitation methods. The ability to parametrize the cavity according to individual atoms, as afforded in the geometry based approach, is key to obtaining accurate enthalpy changes of adsorption under aqueous conditions. Additionally, we show that the electronic structure changes induced by explicit solvent and our proposed implicit solvent parametrization scheme yield comparable density difference profiles and d-band projected density of states. We therefore demonstrate the capability of implicit solvent approaches to capture both the energetics of adsorption processes and the main electronic effects of aqueous solvent on the metallic surface. Therefore, this work provides a scheme for computationally efficient simulations of interfacial processes for applications in areas such as heterogeneous catalysis and electrochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extracting band edge profiles at semiconductor heterostructures from hard-x-ray core-level photoelectron spectra

Hard-x-ray photoelectron spectroscopy (HAXPES) is a valuable source of information on band-edge profiles deep inside semiconductor thin films and heterojunctions. However, extracting this information requires robust and physically meaningful decomposition of spectra into contributions from individual atomic planes. We present an approach that utilizes the physical requirements of a monotonic dependence of the built-in electrostatic potential on depth and continuity of the potential function and its derivatives. These constraints enable efficient extraction of band-edge profiles and allow one to capture details of the electronic structure, including determination of the signs and magnitudes of the band bending as well as the valence band offsets. The utility of this approach to generate quantitative insight into the electronic structure of complex materials is illustrated for epitaxial SrTiO 3 on intrinsic Si(001).

97 MATHEMATICS AND COMPUTING↗

Investigation of electronic properties of the thienoacenes using first principles methods

In the present work, an examination of the electronic properties of pentacene, dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) and dianthra[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DATT) using ab initio methodology is reported. According to the results, the herringbone packing and π-stack orientation play an important role in the hole mobilities for DNTT and DATT. Band structure of pentacene crystals is more anisotropic than DNTT and DATT and the highest values for the dispersion are found in the herrigbone plane. For the band transport regime, it is demonstrated that the DATT must have carrier mobilities larger than pentacene and smaller than that found in DNTT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic constants and Fermi surface topology change in Calaverite AuTe{sub 2}: A density functional study

Structural, elastic, electronic and Fermi surface studies of AuTe{sub 2} have been carried out by means of first principles calculations based on density functional theory. The calculated ground state properties agree well with the experiment. Fermi surface and elastic constants are predicted for the first time and from the calculated elastic constants we find the compound to be mechanically stable satisfying the stability criteria of monoclinic structure. In addition, we also find the c-axis to be more compressible than the other two which is also speculated from the present work. The metallic behaviour of this compound is confirmed from the electronic band structure calculation as we find the bands to cross the Fermi level (E{sub F}). In addition, we also observe a FS topology change under pressure which is also explained in the present work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon doping induced peculiar transport properties of boron nitride nanoribbons p-n junctions

By applying nonequilibrium Green's function combined with density functional theory, we investigate the electronic transport properties of carbon-doped p-n nanojunction based on hexagonal boron nitride armchair nanoribbons. The calculated I-V curves show that both the center and edge doping systems present obvious negative differential resistance (NDR) behavior and excellent rectifying effect. At low positive bias, the edge doping systems possess better NDR performance with larger peak-to-valley ratio (∼10{sup 5}), while at negative bias, the obtained peak-to-valley ratio for both of the edge and center doping systems can reach the order of 10{sup 7}. Meanwhile, center doping systems present better rectifying performance than the edge doping ones, and giant rectification ratio up to 10{sup 6} can be obtained in a wide bias range. These outstanding transport properties are explained by the evolution of the transmission spectra and band structures with applied bias, together with molecular projected self-consistent Hamiltonian eigenvalues and eigenstates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗