Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computational Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

A 1D analysis of two high order MOC methods

The work presented here provides two different methods for evaluating angular fluxes along long characteristics. One is based off a projection of the 1D transport equation onto a complete set of Legendre polynomials, while the other uses the 1D integral transport equation to evaluate the angular flux values at specific points along each track passing through a cell. The Moment Long Characteristic (M-LC) method is shown to provide 2(P+1) spatial convergence and significant gains in accuracy with the addition of only a few spatial degrees of freedom. The M-LC method, though, is shown to be ill-conditioned at very high order and for optically thin geometries. The Point Long Characteristic (P-LC) method, while less accurate, significantly improves stability to problems with optically thin cells. The P-LC method is also more flexible, allowing for extra angular flux evaluations along a given track to give a more accurate representation of the shape along each track. This is at the expense of increasing the degrees of freedom of the system, though, and requires an increase in memory storage. This work concludes that both may be used simultaneously within the same geometry to provide the best mix of accuracy and stability possible. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Navier-Stokes Solutions about the F/A-18 Forebody-LEX Configuration

Three-dimensional viscous flow computations are presented for the F/A-18 forebody-LEX geometry. Solutions are obtained from an algorithm for the compressible Navier-Stokes equations which incorporates an upwind-biased, flux-difference-splitting approach along with longitudinally-patched grids. Results are presented for both laminar and fully turbulent flow assumptions and include correlations with wind tunnel as well as flight-test results. A good quantitative agreement for the forebody surface pressure distribution is achieved between the turbulent computations and wind tunnel measurements at Mach number of 0.6. The computed turbulent surface flow patterns on the forebody qualitatively agree well with in-flight surface flow patterns obtained on an F/A-fS aircraft at Mach number of 0.34.

Transitional flow↗

Pore-Scale and Multiscale Numerical Simulation of Flow and Transport in a Laboratory-Scale Column

Pore-scale models are useful for studying relationships between fundamental processes and phenomena at larger (i.e., Darcy) scales. However, the size of domains that can be simulated with explicit pore-scale resolution is limited by computational and observational constraints. Direct numerical simulation of pore-scale flow and transport is typically performed on millimeter-scale volumes at which X-ray computed tomography (XCT), often used to characterize pore geometry, can achieve micrometer resolution. In contrast, the scale at which a continuum approximation of a porous medium is valid is usually larger, on the order of centimeters to decimeters. Furthermore, laboratory experiments that measure continuum properties are typically performed on decimeter-scale columns. At this scale, XCT resolution is coarse (tens to hundreds of micrometers) and prohibits characterization of small pores and grains. We performed simulations of pore-scale processes over a decimeter-scale volume of natural porous media with a wide range of grain sizes, and compared to results of column experiments using the same sample. Simulations were conducted using high-performance codes executed on a supercomputer. Two approaches to XCT image segmentation were evaluated, a binary (pores and solids) segmentation and a ternary segmentation that resolved a third category (porous solids with pores smaller than the imaged resolution). We used a mixed Stokes-Darcy simulation method to simulate the combination of Stokes flow in large open pores and Darcy-like flow in porous solid regions. Simulations based on the ternary segmentation provided results that were consistent with experimental observations, demonstrating our ability to successfully model pore-scale flow over a column-scale domain.

CFD↗

Strongly Correlated Aromatic Molecular Conductor

Strongly correlated electronic molecules open the way for strong coupling between charge, spin, and lattice degrees of freedom to enable interdisciplinary fields, such as molecular electronic switches and plasmonics, spintronics, information storage, and superconducting circuits. However, despite exciting computational predictions and promising advantages to prepare flexible geometries, the electron correlation effect in molecules has been elusive. In this paper, the electron correlation effects of molecular plasmonic films are reported to uncover their coupling of charge, spin, lattice, and orbital for the switchable metal-to-insulator transition under external stimuli, at which the simultaneous transition occurs from the paramagnetic, electrical, and thermal conducting state to the diamagnetic, electrical, and thermal insulating state. In addition, density functional theory calculation and spectroscopic studies are combined to provide the mechanistic understanding of electronic transitions and molecular plasmon resonance observed in molecular conducting films. The self-assembled molecular correlated conductor paves the way for the next generation integrated micro/nanosystems.

42 ENGINEERING↗

Holographic open quantum systems: toy models and analytic properties of thermal correlators

We present a unified picture of open quantum systems, the theory of a system probing a noisy thermal environment, distilling lessons learnt from previous holographic analyses. Our treatment is applicable both when the system is coupled to short-lived (Markovian), and long-lived (non-Markovian) environmental degrees of freedom. The thermal environment is modeled using an asymptotically AdS black hole, and the systems of interest are simple probe field theories. The effective stochastic dynamics of the system is governed by real-time thermal correlators, which we compute using the gravitational Schwinger-Keldysh (grSK) geometry. We describe the structure of arbitrary tree-level contact and exchange Witten diagrams in the grSK geometry. In particular, we argue, that all such diagrams reduce to integrals supported on a single copy of the exterior of the black hole. The integrand is obtained as a multiple discontinuity of a function comprising ingoing boundary-bulk propagators, monodromy functions which appear as radial Boltzmann weights, and vertex factors. These results allow us to deduce the analytic structure of real-time thermal n-point functions in holographic CFTs. We illustrate the general statements by a two-dimensional toy model, dual to fields in the BTZ background, which we argue captures many of the essential features of generic open holographic QFTs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Polynomial reduction and evaluation of tree- and loop-level CHY amplitudes

We develop a polynomial reduction procedure that transforms any gauge fixed CHY amplitude integrand for n scattering particles into a σ-moduli multivariate polynomial of what we call the standard form . We show that a standard form polynomial must have a specific ladder type monomial structure, which has finite size at any n, with highest multivariate degree given by (n – 3)(n – 4)/2. This set of monomials spans a complete basis for polynomials with rational coefficients in kinematic data on the support of scattering equations. Subsequently, at tree and one-loop level, we employ the global residue theorem to derive a prescription that evaluates any CHY amplitude by means of collecting simple residues at infinity only. Furthermore, the prescription is then applied explicitly to some tree and one-loop amplitude examples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Learning non-Higgsable gauge groups in 4D F-theory

We apply machine learning techniques to solve a specific classification problem in 4D F-theory. For a divisor D on a given complex threefold base, we want to read out the non-Higgsable gauge group on it using local geometric information near D. The input features are the triple intersection numbers among divisors near D and the output label is the non-Higgsable gauge group. We use decision tree to solve this problem and achieved 85%-98% out-of-sample accuracies for different classes of divisors, where the data sets are generated from toric threefold bases without (4,6) curves. We have explicitly generated a large number of analytic rules directly from the decision tree and proved a small number of them. As a crosscheck, we applied these decision trees on bases with (4,6) curves as well and achieved high accuracies. Additionally, we have trained a decision tree to distinguish toric (4,6) curves as well. Finally, we present an application of these analytic rules to construct local base configurations with interesting gauge groups such as SU(3).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Higher-derivative corrections to entropy and the weak gravity conjecture in Anti-de Sitter space

We compute the four-derivative corrections to the geometry, extremality bound, and thermodynamic quantities of AdS-Reissner-Nordström black holes for general dimensions and horizon geometries. We confirm the universal relationship between the extremality shift at fixed charge and the shift of the microcanonical entropy, and discuss the consequences of this relation for the Weak Gravity Conjecture in AdS. The thermodynamic corrections are calculated using two different methods: first by explicitly solving the higher-derivative equations of motion and second, by evaluating the higher-derivative Euclidean on-shell action on the leading-order solution. In both cases we find agreement, up to the addition of a Casimir energy in odd dimensions. We derive the bounds on the four-derivative Wilson coefficients implied by the conjectured positivity of the leading corrections to the microcanonical entropy of thermodynamically stable black holes. These include the requirement that the coefficient of Riemann-squared is positive, meaning that the positivity of the entropy shift is related to the condition that c – a is positive in the dual CFT. We discuss implications for the deviation of η/s from its universal value and a potential lower bound.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Exotic matter on singular divisors in F-theory

We analyze exotic matter representations that arise on singular seven-brane configurations in F-theory. We develop a general framework for analyzing such representations, and work out explicit descriptions for models with matter in the 2-index and 3-index symmetric representations of SU(N) and SU(2) respectively, associated with double and triple point singularities in the seven-brane locus. These matter representations are associated with Weierstrass models whose discriminants vanish to high order thanks to nontrivial cancellations possible only in the presence of a non-UFD algebraic structure. This structure can be described using the normalization of the ring of intrinsic local functions on a singular divisor. We consider the connection between geometric constraints on singular curves and corresponding constraints on the low-energy spectrum of 6D theories, identifying some new examples of apparent “swampland” theories that cannot be realized in F-theory but have no apparent low-energy inconsistency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical Schemes for Rough Parabolic Equations

This paper is devoted to the study of numerical approximation schemes for a class of parabolic equations on (0,1) perturbed by a non-linear rough signal. It is the continuation of Deya (Electron. J. Probab. 16:1489-1518, 2011) and Deya et al. (Probab. Theory Relat. Fields, to appear), where the existence and uniqueness of a solution has been established. The approach combines rough paths methods with standard considerations on discretizing stochastic PDEs. The results apply to a geometric 2-rough path, which covers the case of the multidimensional fractional Brownian motion with Hurst index H>1/3.

97 MATHEMATICS AND COMPUTING↗

Energy of Motion of Internal and Surface Waves in a Two-Layer Hydrodynamic System

We study the energy of wave motion in a two-layer “layer with solid bottom–layer with free surface” hydrodynamic system. The dependences of the energies of motion of internal and surface waves on the geometric and physical parameters of the system are analyzed. The contribution of the second approximation to the total energy of the system is estimated. The reliability of the obtained results is verified. The results are graphically illustrated.

42 ENGINEERING↗

Continuity conditions for tensor product Q-Bézier surfaces of degree (m, n)

Based on a kind of Q-Bézier surfaces with shape parameters, the basic properties of the surfaces and the geometric significance of the shape parameters are analyzed. To resolve the problem of shape control and adjustment of composite surfaces, the continuity conditions for Q-Bézier surfaces of degree (m, n) are investigated. Taking advantage of the terminal properties of generalized Bernstein basis functions, we derive the conditions of G{sup 1} and G{sup 2} continuity between two adjacent Q-Bézier surfaces. In addition, the specific steps of smooth continuity between Q-Bézier surfaces and the shape adjustment function of shape parameters for composite surfaces are discussed. The modeling examples show that the proposed smooth continuity conditions are not only intuitive and easy to implement, but also greatly enhance the shape adjustability, which provide a useful method for constructing complex surfaces in engineering design.

97 MATHEMATICS AND COMPUTING↗

A spectral, quasi-cylindrical and dispersion-free Particle-In-Cell algorithm

We propose a spectral Particle-In-Cell (PIC) algorithm that is based on the combination of a Hankel transform and a Fourier transform. For physical problems that have close-to-cylindrical symmetry, this algorithm can be much faster than full 3D PIC algorithms. In addition, unlike standard finite-difference PIC codes, the proposed algorithm is free of spurious numerical dispersion, in vacuum. This algorithm is benchmarked in several situations that are of interest for laser-plasma interactions. These benchmarks show that it avoids a number of numerical artifacts, that would otherwise affect the physics in a standard PIC algorithm - including the zero-order numerical Cherenkov effect.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The dark side of photovoltaic — 3D simulation of glare assessing risk and discomfort

Photovoltaic (PV) systems form an important force in the implementation of renewable energies, but as we all know, the force has always its dark side. Besides efficiency considerations and discussions about architectures of power distribution networks, the increasing numbers of installations of PV systems for implementing renewable energies have secondary effects. PV systems can generate glare due to optical reflections and hence might be a serious concern. On the one hand, glare could affect safety, e.g. regarding traffic. On the other hand, glare is a constant source of discomfort in vicinities of PV systems. Hence, assessment of glare is decisive for the success of renewable energies near municipalities and traffic zones for the success of solar power. Several courts decided on the change of PV systems and even on their de-installation because of glare effects. Thus, location-based assessments are required to limit potential reflections and to avoid risks for public infrastructure or discomfort of residents. The question arises on how to calculate reflections accurately according to the environment's topography. Our approach is founded in a 3D-based simulation methodology to calculate and visualize reflections based on the geometry of the environment of PV systems. This computational model is implemented by an interactive tool for simulation and visualization. Hence, project planners receive flexible assistance for adjusting the parameters of solar panels amid the planning process and in particular before the installation of a PV system. - Highlights: • Solar panels cause glare that impacts neighborhoods and traffic infrastructures. • Glare might cause disability and discomfort. • 3D environment for the calculation of glare • Interactive tool to simulate and visualize reflections • Impact assessment of solar power plant farms.

54 ENVIRONMENTAL SCIENCES↗

A linked-scale coupled model of mass erosion and redistribution in plasma-exposed micro-foam surfaces

Surface evolution due to exposure to harsh environments is of importance in many scientific and technological applications. In plasma-exposed materials, the surface receives charged particles from the plasma, leading to a series of processes that drive the system far from equilibrium and may lead to the severe deterioration of the surface properties. Although surface morphological changes are driven by atomic collisions taking place over picoseconds and nanometers, these processes result in mass loss and redistribution of matter over much larger length and time scales. This necessitates a multi-scale approach capable of capturing the range of processes linking primary atomic collision events with engineering-level surface geometry changes. In this paper, we develop a computational model to simulate the morphological evolution and effective erosion rate of micro-architected tungsten foams during low-energy plasma ion bombardment. Furthermore, the model acts on several length scales, with the energy and angular dependence of the sputtering yield of flat tungsten surfaces determined using the SRIM code based on the binary collision approximation. This information is introduced into a low-fluence, short-term Monte Carlo raytracing model, and further into a high-fluence, long-term particle transport model. In the latter, material particles representing billions of atoms are described in a digitized 3-D representation of the foam structure from X-ray tomography data, and are sputtered off and redeposited using the atomistic information. We show that the redeposition of sputtered atoms leads to partial self-healing in the bottom layers with a sharp reduction in the sputtering coefficient of low density foams, roughly 25% of the solid W value. This is in qualitative agreement with recent experiments on low porosity W structures. At high fluence, the foam structure degrades considerably as there are fewer ligaments available to recapture sputtered atoms and, consequently, the sputtering rate increases again.

36 MATERIALS SCIENCE↗

Building a Consistent and Reproducible Database for Adsorption Evaluation in Covalent–Organic Frameworks

We present a workflow that traces the path from the bulk structure of a crystalline material to assessing its performance in carbon capture from coal's postcombustion flue gases. This workflow is applied to a database of 324 covalent-organic frameworks (COFs) reported in the literature, to characterize their CO 2 adsorption properties using the following steps: (1) optimization of the crystal structure (atomic positions and unit cell) using density functional theory, (2) fitting atomic point charges based on the electron density, (3) characterizing the pore geometry of the structures before and after optimization, (4) computing carbon dioxide and nitrogen isotherms using grand canonical Monte Carlo simulations with an empirical interaction potential, and finally, (5) assessing the CO 2 parasitic energy via process modeling. The full workflow has been encoded in the Automated Interactive Infrastructure and Database for Computational Science (AiiDA). Both the workflow and the automatically generated provenance graph of our calculations are made available on the Materials Cloud, allowing peers to inspect every input parameter and result along the workflow, download structures and files at intermediate stages, and start their research right from where this work has left off. In particular, our set of CURATED (Clean, Uniform, and Refined with Automatic Tracking from Experimental Database) COFs, having optimized geometry and high-quality DFT-derived point charges, are available for further investigations of gas adsorption properties. We plan to update the database as new COFs are being reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying mechanistic differences between co-fed CO 2 hydrogenation and reactive CO 2 capture using Ru and Pd dual function materials

Dual function materials (DFMs) enable reactive carbon capture (RCkeC), an intensified approach to carbon dioxide capture and utilization for cost and energy input reductions. Yet, there is a fundamental lack of understanding of mechanisms around CO 2 adsorption and subsequent conversion on these materials, hindering further development. Herein, we investigated several supported alkaline metal oxides for their CO 2 adsorption characteristics to find that Na/Al 2 O 3 had the highest CO 2 adsorption capacity, accompanied by a variety of CO 2 adsorption geometries as identified by in situ DRIFTS and computational modeling. The addition of catalytic metals (Ru, Pd) increased the adsorption capacity of Na/Al 2 O 3 without altering binding modes. In the subsequent reactive desorption step, acetate and formate intermediates were observed. Notably, this mechanistic investigation identified that the formation of acetate species was unique to RCC on a DFM, as these species were not observed in co-fed hydrogenation over the DFM or RCC over a Na-free catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automatic Lane-Level Road Network Extraction from Aerial Imagery for Transportation Digital Twins

Accurate road networks are essential for credible traffic microsimulation and transportation digital twins, yet high-definition maps are often difficult to obtain due to limited availability, high cost, or proprietary restrictions. Some build networks from crowdsourced data, such as OpenStreetMap, but these sources often contain geometric and semantic inconsistencies. Others create networks manually, a process that is labor-intensive and difficult to scale. To address these limitations, this work presents an end-to-end pipeline that automatically extracts georeferenced, lane-level road networks from publicly available high-resolution satellite imagery and converts them into simulation-ready assets. The developed end-to-end pipeline has three primary modules: (1) A computer-vision-based module first detects directed lane geometries and intersection layouts. (2) A heuristic-based topology construction module then identifies approach and exit legs and establishes conflict-free lane-to-lane connections. (3) Finally, an automatic simulation-building module converts the extracted network into standard formats, e.g., OpenDRIVE, and generates routable SUMO networks. The framework supports both complete network construction from scratch and local-scale refinement of existing networks through lane-count correction, transition recovery, and geometric regularization. The proposed pipeline provides a practical pathway to generate traffic simulation networks from satellite imagery, significantly reducing manual reconstruction effort and enabling scalable, continuously updated transportation digital twins.

Guo, Hetian [University of Georgia, Athens] (ORCID↗