Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

The effect of temperature and microstructure on dynamic deformation of iron, tantalum, and titanium

Laser-driven shock loading was performed on thin samples of iron, tantalum, and titanium at strain-rates up to 10 7 s –1 , and over a range of temperatures extending from 120 through 800 K, to investigate the influence of temperature on the early stages of yielding and plastic flow in materials of distinct crystal structure and initial defect density. The onset of yielding was identified using time-resolved velocimetry of the target rear surface to reveal the peak elastic state in the precursor wave front. Measurements on as-received iron reveal a trend of decreasing peak elastic stress (σE) with increasing temperature and electron microscopy of the recovered material revealed evidence of mobile dislocations coalescing into subgrains. This is in contrast to the results for the annealed iron where theσEremains constant with increasing temperature and recovered samples showed indications of deformation twinning. For tantalum, the yield strength remains constant for the most part, but has a jump in yield strength at 815 K, indicative of a possible twinning to slip transition with increasing temperature. For titanium, the yield strength was generally constant with temperature. Here, these results provide insight into studying deformation mechanisms, such as slip and twinning, in high rate loading of materials.

36 MATERIALS SCIENCE↗

Closely spaced SiGe barns as stressor structures for strain-enhancement in silicon

We present tensile and compressive strains realized within the same Si capping layer on an array of SiGe islands grown on pit-patterned (001) Si substrates. The strain distributions are obtained from synchrotron X-ray diffraction studies in combination with three-dimensional finite element calculations and simulations of the diffracted intensities. For barn-shaped islands grown at 720 Degree-Sign C with average Ge contents of 30%, the Si cap layer is misfit- and threading-dislocation free and exhibits compressive strains as high as 0.8% in positions between the islands and tensile strains of up to 1% on top of the islands.

36 MATERIALS SCIENCE↗

Transitions in the morphology and critical stresses of gliding dislocations in multiprincipal element alloys

Refractory multiprincipal element alloys (MPEAs) are promising material candidates for high-temperature, high-strength applications. However, their deformation mechanisms, particularly at the dislocation scale, are unusual compared to those of conventional alloys, making it challenging to understand the origin of their high strength. Here, using an atomistically informed phase-field dislocation dynamics model, we study transitions in the morphology and critical stresses of long gliding screw dislocations over extended distances in a refractory MPEA. The model MPEA crystal accounts for the atomic-scale fluctuations in chemical composition across the glide planes via spatially correlated lattice energies and for the differences in glide resistances between screw and edge dislocations of unit length. Here, we show that the dislocation moves in a stop-start motion, alternating between wavy morphology in free flight and nearly recovered straight screw orientation in full arrest. The periods of wavy glide are due to variable kink-pair formation and migration rates along the length, where portions with higher rates glide more quickly. The critical stress to initiate motion corresponds to the stress required to form and migrate a kink pair at the weakest region along the length of the dislocation. Heterogeneity in lattice energy leads to variability in the local stress-strain response and to a strain hardening-like response, in which the critical stress to reactivate glide increases with glide distance. Statistical assessment of hundreds of realizations of dislocations indicates that the amount of hardening directly scales with the dispersion in underlying lattice energy.

3-dimensional systems↗

Radiation Enhanced Absorption of Frank Loops by Nanovoids in Cu

Neutron and heavy ion irradiation generally induces voids in metallic materials, and continuous radiations typically result in void swelling and mechanical failure of the irradiated materials. Recent experiments showed that nanovoids in nanotwinned copper could act as sinks for radiation-induced Frank loops, significantly mitigating radiation damage [Y. Chen et al., Nat. Commun. 6:7036 (2015)]. In this paper, we report on structural evolution of Frank loops under cascades and address the role of nanovoids in absorbing Frank loops in detail by using molecular dynamics simulations. Results show that a stand-alone Frank loop is stable under cascades. When Frank loops are adjacent to nanovoids, the diffusion of a group of atoms from the loop into nanovoids is accomplished via the formation and propagation of dislocation loops. The loop-nanovoid interactions result in the shrinkage of the nanovoids and the Frank loops.

36 MATERIALS SCIENCE↗

Defect and structural evolution under high-energy ion irradiation informs battery materials design for extreme environments

Understanding defect evolution and structural transformations constitutes a prominent research frontier for ultimately controlling the electrochemical properties of advanced battery materials. Herein, for the first time, we utilize in situ high-energy Kr ion irradiation with transmission electron microscopy to monitor how defects and microstructures evolve in Na- and Li-layered cathodes with 3d transition metals. Our experimental and theoretical analyses reveal that Li-layered cathodes are more resistant to radiation-induced structural transformations, such as amorphization than Na-layered cathodes. The underlying mechanism is the facile formation of Li-transition metal antisite defects in Li-layered cathodes. The quantitative mathematical analysis of the dynamic bright-field imaging shows that defect clusters preferentially align along the Na/Li ion diffusion channels ( a-b planes), which is likely governed by the formation of dislocation loops. Our study provides critical insights into designing battery materials for extreme irradiation environments and understanding fundamental defect dynamics in layered oxides.

25 ENERGY STORAGE↗

Dislocation mediated alignment during metal nanoparticle coalescence

Dislocation mediated alignment processes during gold nanoparticle coalescence were studied at low and high temperatures using molecular dynamics simulations and transmission electron microscopy. Particles underwent rigid body rotations immediately following attachment in both low temperature (500 K) simulated coalescence events and low temperature (~315 K) transmission electron microscopy beam heating experiments. In many low temperature simulations, some degree of misorientation between particles remained after rigid body rotations, which was accommodated by grain boundary dislocation nodes. These dislocations were either sessile and remained at the interface for the duration of the simulation or dissociated and cross-slipped through the adjacent particles, leading to improved co-alignment. Minimal rigid body rotations were observed during or immediately following attachment in high temperature (1100 K) simulations, which is attributed to enhanced diffusion at the particles' interface. However, rotation was eventually induced by {111} slip on planes parallel to the neck groove. These deformation modes led to the formation of single and multi-fold twins whose structures depended on the initial orientation of the particles. The driving force for {111} slip is attributed to high surface stresses near the intersection of low energy {111} facets in the neck region. The details of this twinning process were examined in detail using simulated trajectories, and the results reveal possible mechanisms for the nucleation and propagation of Shockley partials on consecutive planes. Deformation twinning was also observed in-situ using transmission electron microscopy, which resulted in the co-alignment of a set of the particles' {111} planes across their grain boundary and an increase in their dihedral angle. As a result, this constitutes the first detailed experimental observation of deformation twinning during nanoparticle coalescence, validating simulation results presented here and elsewhere.

36 MATERIALS SCIENCE↗

Modeling Mesoscale Processes of Scalable Synthesis Final Scientific/Technical Report

This is the final scientific and technical report for this award. Molecular dynamics (MD) is a powerful tool to study biomolecules at the nanoscale. One of its main limitations however is that such simulations typically require a timestep of 1 femtosecond while reactions and conformational changes typically happen on the time scale of 1 microsecond or more. This discrepancy severely restricts the impact of this method. We have developed a series of algorithms to mitigate this problem and allow predicting long-time scale events using much shorter simulations. The method is based on the concurrent adaptive sampling method. It consists in using probabilistic weights for trajectories and biasing the sampling such that rare but important trajectories, e.g., those that go over energy barriers and lead to relevant conformational changes in the molecule, are observed with much higher frequency that in a standard MD simulation. We will demonstrate below that this approach has been very successful. In collaboration with Jay Grate at PNNL we have applied this novel method to the study the triazine polymers, which can be con gured using different types of side chains in order to adopt different 3-dimensional structures. We have found novel stable con- formations and have analyzed the impact of side chain modifcations on the native folded shape of the polymer. Direct MD simulations would have been untractable for this problem. The method of replica exchange was also used successfully to calculate free energy profiles, in particular for cis-trans torsional angle changes with high energy barriers. Studying molecules at the atomistic scale is essential to design new molecules in chemical engineering, such as the triazine polymers developed by Grate, in material science to study the strength of metals for examples (e.g., dislocation dynamics), or in biochemistry to understand how proteins fold and how they interact with ligands (a key step in designing drugs). Although new hardware makes these simulations increasingly faster (e.g., GPU, Anton from DE Shaw Research), new algorithms are key to making these methods more tractable and increase their impact. At this point, because of limitations in modeling, one of the main techniques for advancing science remains to a large extent numerous and costly experiments. For exam- ple, when designing drug, where multiple variants must be screened, the ability to run tests on a computer rather than experimentally testing with high throughput methods thousands of compounds would represent a signi cant advance with broad benefits for the public at large.

36 MATERIALS SCIENCE↗

Exploring the origins of the indentation size effect at submicron scales

Significance Downscaling material structure into ever-decreasing levels for modern technological advancements demands small-scale mechanical characterizations of materials, such as nanoindentation. Thus, a comprehensive understanding of indentation size effect (ISE) has a far-reaching impact, but such understanding remains incomplete at the submicron scale despite a decades-long quest since the 1980s. Here, we explored the origins of this effect experimentally by linking dislocation behavior evolution with nanoindentation mechanical data at various depths. Importantly, the dislocation behavior is found to be strongly depth dependent and gives rise to subgrain formation progressively. Aided by subgrain boundaries, the ISE mechanism transitions from dislocation source starvation to dislocation interaction as indentation depth increases. The critical mechanism transition elucidates the distinctive ISE behavior at the submicron scale.

36 MATERIALS SCIENCE↗

Dynamical Scaling Reveals Topological Defects and Anomalous Evolution of a Photoinduced Phase Transition

Nonequilibrium states of quantum materials can exhibit exotic properties and enable unprecedented functionality and applications. These transient states are inherently inhomogeneous, characterized by the formation of topologically protected structures, requiring nanometer spatial resolution on femtosecond timescales to resolve their evolution. Using ultrafast total x-ray scattering at a free electron laser and a sophisticated scaling analysis, we gain unique access to the dynamics on the relevant mesoscopic lengthscales. Our results provide direct evidence that ultrafast excitation of LaTe$_3$ leads to formation of topological vortex strings of the charge density wave. These dislocations of the charge density wave exhibit anomalous, subdiffusive dynamics, slowing the equilibration process, providing rare insight into the nonequilibrium mesoscopic response in a quantum material. Our findings establish a general framework to investigate properties of topological defects, which are expected to be ubiquitous in nonequilibrium phase transitions and may arrest equilibration and enhance competing orders.

FOS: Physical sciences↗

Mobility and coalescence of stacking fault tetrahedra in Cu

Stacking fault tetrahedra (SFTs) are ubiquitous defects in face-centered cubic metals. They are produced during cold work plastic deformation, quenching experiments or under irradiation. From a dislocation point of view, the SFTs are comprised of a set of stair-rod dislocations at the (110) edges of a tetrahedron bounding triangular stacking faults. These defects are extremely stable, increasing their energetic stability as they grow in size. At the sizes visible within transmission electron microscope they appear nearly immobile. Contrary to common belief, we show in this report, using a combination of molecular dynamics and temperature accelerated dynamics, how small SFTs can diffuse by temporarily disrupting their structure through activated thermal events. More over, we demonstrate that the diffusivity of defective SFTs is several orders of magnitude higher than perfect SFTs, and can be even higher than isolated vacancies. Finally, we show how SFTs can coalesce, forming a larger defect in what is a new mechanism for the growth of these omnipresent defects.

36 MATERIALS SCIENCE↗

Recovery and facets for deformation twins in minerals and metals

Type II and IV twins with irrational twin boundaries are studied by high-resolution transmission electron microscopy in two plagioclase crystals. The twin boundaries in these and in NiTi are found to relax to form rational facets separated by disconnections. The topological model (TM), amending the classical model, is required for a precise theoretical prediction of the orientation of the Type II/IV twin plane. Theoretical predictions also are presented for types I, III, V, and VI twins. The relaxation process that forms a faceted structure entails a separate prediction from the TM. Hence, faceting provides a difficult test for the TM. Analysis of the faceting by the TM is in excellent agreement with the observations.

36 MATERIALS SCIENCE↗

Dynamical Scaling Reveals Topological Defects and Anomalous Evolution of a Photoinduced Phase Transition

Nonequilibrium states of quantum materials can exhibit exotic properties and enable unprecedented functionality and applications. These transient states are inherently inhomogeneous, characterized by the formation of topologically protected structures, requiring nanometer spatial resolution on femtosecond timescales to resolve their evolution. Using ultrafast total x-ray scattering at a free electron laser and a sophisticated scaling analysis, we gain unique access to the dynamics on the relevant mesoscopic length scales. Our results provide direct evidence that ultrafast excitation of LaTe 3 leads to formation of topological vortex strings of the charge density wave. These dislocations of the charge density wave exhibit anomalous, subdiffusive dynamics, slowing the equilibration process, providing rare insight into the nonequilibrium mesoscopic response in a quantum material. Our findings establish a general framework to investigate properties of topological defects, which are expected to be ubiquitous in nonequilibrium phase transitions and may arrest equilibration and enhance competing orders.

Orenstein, Gal [SLAC National Accelerator Laborato↗

Substructure of Intermetallic Thin-Film Cu{sub 3}Sn

The crystalline structure of intermetallic Cu{sub 3}Sn synthesized by successively condensing thin layers of copper and tin on a substrate at 150°C has been studied. Cu{sub 3}Sn compound exists in a very narrow homogeneity range and has a long-period close-packed ordered D0{sub 19} superstructure. It has been found that the crystal lattice exhibits many slip traces associated with dislocation motion. The dislocation motion is due to the stressed state of the crystal, which can be characterized as uniform extension. Electron micrographs show that slip traces in the Cu{sub 3}Sn crystal are parallel to the ( 1-bar 1-bar 21) and (11 2-bar 1) planes belonging to pyramidal slip system II, which is a main slip system along with pyramidal and basal ones. Slip traces result from the motion of partial dislocations, as indicated by the amount of slip, which is equal to half the interplanar distance. Since the crystal is ordered, slip is accomplished by a pair of superpartial dislocations and a slip trace may be a superstructural or complex stacking fault.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Rate Theory Model of Radiation-Induced Swelling in an Austenitic Stainless Steel

Many rate theory models of cavity (void) swelling have been published over the past 50 years, all having the same, or similar, structures. A rigorous validation of the models has not been possible because of the dearth of information concerning the microstructures that correspond with the swelling data. Whereas the lack of microstructure information is still an issue for historical swelling data, in the past 10–20 years data have been published on the evolution of the microstructure (point defect yields from collision cascades, cavity number densities, and dislocation densities/yield strengths) allowing certain gaps in information to be filled when considering historic swelling data. With reasonable estimates of key microstructure parameters, a standard rate theory model can be applied, and the model parameter space explored, in connection with historical swelling data. By using published data on: (i) yield strength as a function of dose and temperature (to establish an empirical expression for dislocation density evolution); (ii) cavity number densities as a function of temperature; and (iii) freely migrating defect (FMD) production as a function of primary knock-on atom (PKA) spectrum, the necessary parameter and microstructure inputs that were previously unknown can be used in model development. This paper describes a rate-theory model for void swelling of 316 stainless steel irradiated in the EBR-2 reactor as a function of irradiation temperature and neutron dose.

36 MATERIALS SCIENCE↗

Analytical TEM characterization of modified F82H and 14YW under irradiation of simultaneous helium and neutron irradiation compared to only neutron at 500 C

A RAFM steel and an ODS ferritic alloy (F82H.mod3+CW and 14YW, respectively) were irradiated as part of the JP27 irradiation experiment conducted in the High Flux Isotope Reactor to explore He effects in structural alloys. The ISHI technique is used to implant He up to 9 µm below the surface of a NiAl coated sample at He/dpa levels up to ~50. This report summarizes the current status of TEM characterization of two irradiated alloys. The He-implanted side of the RAFM alloy exhibited significant swelling due to bubble and void formation within the matrix, on pre-existing dislocations, and at interfaces within the material. The 14YW alloy exhibited significant swelling even in the absence of implanted He, primarily through large voids that formed on the ODS particles. In addition, significant radiation-induced segregation of the Cr was observed around oxide particles and on lath boundaries, and visible α' particles could be detected via elemental mapping of the matrix of the 14YW alloy.

36 MATERIALS SCIENCE↗

Effect of an in-situ thermal annealing on the structural properties of self-assembled GaSb/GaAs quantum dots

The effect of the application of a thermal annealing on the structural properties of GaSb/GaAs quantum dots (QDs) is analyzed by aberration corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and electron energy loss spectroscopy (EELS). Our results show that the GaSb/GaAs QDs are more elongated after the annealing, and that the interfaces are less abrupt due to the Sb diffusion. We have also found a strong reduction in the misfit dislocation density with the annealing. The analysis by EELS of a threading dislocation has shown that the dislocation core is rich in Sb. In addition, the region of the GaAs substrate delimited by the threading dislocation is shown to be Sb-rich as well. An enhanced diffusion of Sb due to a mechanism assisted by the dislocation movement is discussed.

36 MATERIALS SCIENCE↗

Self-equilibrated backstresses induce compensation between hardening and softening: Micromechanical and microstructural features

For crystal plasticity formulation neglecting the strain gradients at the dislocation scale, backstresses are necessary to satisfy the mesoscopic stress equilibrium and strain compatibility requirements. Backstresses in a material point and those between neighboring points are treated separately. Physically backstresses can dynamically induce either hardening or softening effects to adjust the dislocation hardening of slip systems, whereas the sum of the stresses resulting in backstresses in the representative volume element (RVE) is zero. Backstress hardening suppresses certain slip activities, while backstress softening triggers excess dislocations. A two-phase brass is studied. Backstresses make the hard phase deform smaller and the soft phase deform more than those without employing backstresses in a model. In the former, more homogeneous lattice strain and higher yield stress are obtained. Backstress has limited effects on the evolution of the critical resolved shear stress and crystallographic texture. Furthermore, it is a major cause of the banded structures featuring sharp crystallographic contrasts which are not parallel to the slip planes. Tests indicate that backstress induces a serrated behavior at the early stages of deformation and induces the geometrically necessary bands (GNBs), which are parallel to the macroscopic axes.

36 MATERIALS SCIENCE↗