Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gaussian Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Diffusion and photon-stimulated desorption of CO on TiO2(110)

Thermal diffusion of CO adsorbed on rutile TiO2(110) was studied in the 20 - 110 K range using photon-stimulated desorption (PSD), temperature programmed desorption (TPD) and scanning tunneling microscopy. During UV irradiation, CO desorbs from certain photoactive sites (e.g. oxygen vacancies). This phenomenon was exploited to study CO thermal diffusion in three steps: first empty these sites during a first irradiation cycle, then replenish them with CO during annealing, and finally probe the active site occupancy in the second PSD cycle. The PSD and TPD experiments show that the CO diffusion rate correlates with the CO adsorption energy – stronger binding corresponds to slower diffusion. Increasing the CO coverage or hydroxylation of the surface decreases the CO binding and increases the CO diffusion rate. Relative to the reduced surface, the CO adsorption energy increases and the diffusion decreases on the oxidized surface. The CO diffusion kinetics can be modeled satisfactorily as an Arrhenius process with a “normal” prefactor (i.e. = 1012 s 1) and a Gaussian distribution of activation energies where the peak of the distribution is ~0.28 eV and the full width at half maximum (FWHM) is 0.1 eV at the lowest coverages. The observations are consistent with a significant electrostatic component of the CO binding energy on the TiO2(110) surface which is affected by changes in the surface dipole and dipole-dipole interactions.

Petrik, Nikolay G.↗

Stochastic tunneling for strongly non-Gaussian inflationary theories

We reconsider the dynamics of stochastic or thermal tunneling in theories like Dirac-Born-Infeld inflation that have non-minimal kinetic terms and, as a result, strongly non-Gaussian perturbations. We first describe a local description of the tunneling process which gives results consistent with the standard Hawking-Moss tunneling. This result is under perturbative control as long as the fluctuation determinant is well approximated by a one-loop integral. We then move to a global description, using the methodology of stochastic inflation and the in-in path integral formalism. This approach shows clearly that the tunneling process becomes strongly coupled whenever the sound speed of the tunneling trajectory departs sufficiently from unity. We argue that these two very different perspectives are nevertheless consistent, and may imply the existence of a simple resummation of the strongly coupled interactions of the field.

79 ASTRONOMY AND ASTROPHYSICS↗

Extraction of Qualitative Features from Sensor Data Using Windowed Fourier Transform

In this paper, we use Matlab to model the health monitoring of a system through the information gathered from sensors. This implies assessment of the condition of the system components. Once a normal mode of operation is established any deviation from the normal behavior indicates a change. This change may be due to a malfunction of an element, a qualitative change, or a change due to a problem with another element in the network. For example, if one sensor indicates that the temperature in the tank has experienced a step change then a pressure sensor associated with the process in the tank should also experience a step change. The step up and step down as well as sensor disturbances are assumed to be exponential. An RC network is used to model the main process, which is step-up (charging), drift, and step-down (discharging). The sensor disturbances and spike are added while the system is in drift. The system is allowed to run for a period equal to three time constant of the main process before changes occur. Then each point of the signal is selected with a trailing data collected previously. Two trailing lengths of data are selected, one equal to two time constants of the main process and the other equal to two time constants of the sensor disturbance. Next, the DC is removed from each set of data and then the data are passed through a window followed by calculation of spectra for each set. In order to extract features the signal power, peak, and spectrum are plotted vs time. The results indicate distinct shapes corresponding to each process. The study is also carried out for a number of Gaussian distributed noisy cases.

Amini, Abolfazl M.↗

SU-E-J-243: Possibility of Exposure Dose Reduction of Cone-Beam Computed Tomography in An Image Guided Patient Positioning System by Using Various Noise Suppression Filters

Purpose: To investigate the possibility of exposure dose reduction of the cone-beam computed tomography (CBCT) in an image guided patient positioning system by using 6 noise suppression filters. Methods: First, a reference dose (RD) and low-dose (LD)-CBCT (X-ray volume imaging system, Elekta Co.) images were acquired with a reference dose of 86.2 mGy (weighted CT dose index: CTDIw) and various low doses of 1.4 to 43.1 mGy, respectively. Second, an automated rigid registration for three axes was performed for estimating setup errors between a planning CT image and the LD-CBCT images, which were processed by 6 noise suppression filters, i.e., averaging filter (AF), median filter (MF), Gaussian filter (GF), bilateral filter (BF), edge preserving smoothing filter (EPF) and adaptive partial median filter (AMF). Third, residual errors representing the patient positioning accuracy were calculated as an Euclidean distance between the setup error vectors estimated using the LD-CBCT image and RD-CBCT image. Finally, the relationships between the residual error and CTDIw were obtained for 6 noise suppression filters, and then the CTDIw for LD-CBCT images processed by the noise suppression filters were measured at the same residual error, which was obtained with the RD-CBCT. This approach was applied to an anthropomorphic pelvic phantom and two cancer patients. Results: For the phantom, the exposure dose could be reduced from 61% (GF) to 78% (AMF) by applying the noise suppression filters to the CBCT images. The exposure dose in a prostate cancer case could be reduced from 8% (AF) to 61% (AMF), and the exposure dose in a lung cancer case could be reduced from 9% (AF) to 37% (AMF). Conclusion: Using noise suppression filters, particularly an adaptive partial median filter, could be feasible to decrease the additional exposure dose to patients in image guided patient positioning systems.

60 APPLIED LIFE SCIENCES↗

Uncertainty analysis technique for OMEGA Dante measurements

The Dante is an 18 channel x-ray filtered diode array which records the spectrally and temporally resolved radiation flux from various targets (e.g., hohlraums, etc.) at x-ray energies between 50 eV and 10 keV. It is a main diagnostic installed on the OMEGA laser facility at the Laboratory for Laser Energetics, University of Rochester. The absolute flux is determined from the photometric calibration of the x-ray diodes, filters and mirrors, and an unfold algorithm. Understanding the errors on this absolute measurement is critical for understanding hohlraum energetic physics. We present a new method for quantifying the uncertainties on the determined flux using a Monte Carlo parameter variation technique. This technique combines the uncertainties in both the unfold algorithm and the error from the absolute calibration of each channel into a one sigma Gaussian error function. One thousand test voltage sets are created using these error functions and processed by the unfold algorithm to produce individual spectra and fluxes. Statistical methods are applied to the resultant set of fluxes to estimate error bars on the measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improved Data Interpretation through Identification of Time Series Periodicity Changes

Analysis and interpretation of time series data is easiest when the data values occur at uniform intervals in time, but actual data may have differing data sampling frequencies, such as monthly and daily readings. Applying data analysis techniques, such as smoothing, to such a data set may not give a representative result between time segments. The ability to automatically distinguish time segments of differing data frequency would provide a means for applying data analysis independently to each segment, though a suitable blending at segment boundaries would be required. A method for detecting frequency changes was developed and applied to Gaussian and median smoothing of hydraulic head data from groundwater wells at the U.S. Department of Energy Hanford Site in southeastern Washington state. The process identifies time segments of high-frequency (daily) or low-frequency (greater than daily) data using adjusted-bandwidth Gaussian kernel density estimation and a threshold value, which are further refined to address small blocks of low-frequency data within larger blocks of high-frequency data. User-selectable levels of smoothing are then applied independently to the time segments prior to combining the segment results for a single smoothed data set. This time segment identification approach provides effective low- and high-frequency data separation, which provides a method to apply data analysis independently to each time segment.

97 MATHEMATICS AND COMPUTING↗

Hybrid Basis and Multi-Center Grid Method for Strong-Field Processes

We present a time-dependent framework that combines a hybrid basis, consisting of Gaussian-type orbitals (GTOs) and finite-element discrete-variable representation (FEDVR) functions, with a multicenter grid to simulate strong-field and attosecond dynamics in atoms and molecules. The method incorporates the construction of the orthonormal hybrid basis, the evaluation of electronic integrals, a unitary time-propagation scheme, and the extraction of optical and photoelectron observables. Its accuracy and robustness are benchmarked on one-electron systems such as atomic hydrogen and the dihydrogen cation (H$^+_2$) through comparisons with essentially-exact reference results for bound-state energies, high-harmonic generation spectra, photoionization cross sections, and photoelectron momentum distributions. This work establishes the groundwork for its integration with quantum-chemistry methods, which is already operational but will be detailed in future work, thereby enabling ab initio simulations of correlated polyatomic systems in intense ultrafast laser fields.

74 ATOMIC AND MOLECULAR PHYSICS↗

WE-G-204-01: BEST IN PHYSICS (IMAGING): Effect of Image Processing Parameters On Nodule Detectability in Chest Radiography

Purpose: To investigate the effect of varying system image processing parameters on lung nodule detectability in digital radiography. Methods: An anthropomorphic chest phantom was imaged in the posterior-anterior position using a GE Discovery XR656 digital radiography system. To simulate lung nodules, a polystyrene board with 6.35mm diameter PMMA spheres was placed adjacent to the phantom (into the x-ray path). Due to magnification, the projected simulated nodules had a diameter in the radiographs of approximately 7.5 mm. The images were processed using one of GE’s default chest settings (Factory3) and reprocessed by varying the “Edge” and “Tissue Contrast” processing parameters, which were the two user-configurable parameters for a single edge and contrast enhancement algorithm. For each parameter setting, the nodule signals were calculated by subtracting the chest-only image from the image with simulated nodules. Twenty nodule signals were averaged, Gaussian filtered, and radially averaged in order to generate an approximately noiseless signal. For each processing parameter setting, this noise-free signal and 180 background samples from across the lung were used to estimate ideal observer performance in a signal-known-exactly detection task. Performance was estimated using a channelized Hotelling observer with 10 Laguerre-Gauss channel functions. Results: The “Edge” and “Tissue Contrast” parameters each had an effect on the detectability as calculated by the model observer. The CHO-estimated signal detectability ranged from 2.36 to 2.93 and was highest for “Edge” = 4 and “Tissue Contrast” = −0.15. In general, detectability tended to decrease as “Edge” was increased and as “Tissue Contrast” was increased. A human observer study should be performed to validate the relation to human detection performance. Conclusion: Image processing parameters can affect lung nodule detection performance in radiography. While validation with a human observer study is needed, model observer detectability for common tasks could provide a means for optimizing image processing parameters.

60 APPLIED LIFE SCIENCES↗

3-center and 4-center 2-particle Gaussian AO integrals on modern accelerated processors

We report an implementation of the McMurchie–Davidson (MD) algorithm for 3-center and 4-center 2-particle integrals over Gaussian atomic orbitals (AOs) with low and high angular momenta l and varying degrees of contraction for graphical processing units (GPUs). This work builds upon our recent implementation of a matrix form of the MD algorithm that is efficient for GPU evaluation of 4-center 2-particle integrals over Gaussian AOs of high angular momenta (l ≥ 4) [A. Asadchev and E. F. Valeev, J. Phys. Chem. A 127, 10889–10895 (2023)]. The use of unconventional data layouts and three variants of the MD algorithm allow for the evaluation of integrals with double precision and sustained performance between 25% and 70% of the theoretical hardware peak. Performance assessment includes integrals over AOs with l ≤ 6 (a higher l is supported). Preliminary implementation of the Hartree–Fock exchange operator is presented and assessed for computations with up to a quadruple-zeta basis and more than 20 000 AOs. The corresponding C++ code is part of the experimental open-source LibintX library available at https://github.com/ValeevGroup/libintx.

Chemistry↗

Electronically nonadiabatic wave packet propagation using frozen Gaussian scattering

We present an approach, which allows to employ the adiabatic wave packet propagation technique and semiclassical theory to treat the nonadiabatic processes by using trajectory hopping. The approach developed generates a bunch of hopping trajectories and gives all additional information to incorporate the effect of nonadiabatic coupling into the wave packet dynamics. This provides an interface between a general adiabatic frozen Gaussian wave packet propagation method and the trajectory surface hopping technique. The basic idea suggested in [A. D. Kondorskiy and H. Nakamura, J. Chem. Phys. 120, 8937 (2004)] is revisited and complemented in the present work by the elaboration of efficient numerical algorithms. We combine our approach with the adiabatic Herman-Kluk frozen Gaussian approximation. The efficiency and accuracy of the resulting method is demonstrated by applying it to popular benchmark model systems including three Tully’s models and 24D model of pyrazine. It is shown that photoabsorption spectrum is successfully reproduced by using a few hundreds of trajectories. We employ the compact finite difference Hessian update scheme to consider feasibility of the ab initio “on-the-fly” simulations. It is found that this technique allows us to obtain the reliable final results using several Hessian matrix calculations per trajectory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Image-gathering system design for information and fidelity

Image gathering and processing are assessed in terms of information and fidelity, and the relationship between these two figures of merit is examined. It is assumed that the system is linear and isoplanatic and that the signal and noise amplitudes are Gaussian, wide-sense stationary, and statistically independent. Within these constraints, it is found that the combined process of image gathering and reconstruction (which is intended to reproduce the output of the image-gathering system) behaves as optical, or photographic, image formation in that the informationally optimized design of the image-gathering system ordinarily does not maximize the fidelity of the reconstructed image. The combined process of image gathering and restoration (which is intended to reproduce the input of the image-gathering system) behaves more as a communication channel in that the informationally optimized design of the image-gathering system tends to maximize the fidelity of optimally restored representations of the input.

Huck, Friedrich O.↗

Deciphering the Spectra of Flowers to Map Landscape-scale Blooming Dynamics

Like leaves, floral coloration is driven by inherent optical properties, which are determined by pigments, scattering structure, and thickness. However, establishing the relative contribution of these factors to canopy spectral signals is usually limited to in-situ observations. Modeling flowering dynamics (e.g., blooming duration, spatial distribution) at the landscape scale may reveal insights into ecological processes and phenological adaptations to environmental changes. Multitemporal visible to shortwave infrared (VSWIR) imaging spectroscopy observations are especially suited for such efforts. Reflectance in this spectral range is sensitive to major flower pigments, flowering phenology traces, and biophysical differences between flowers and other plant parts. We explored how flowers contribute to spectral signals using a time series of imagery from the Airborne Visible InfraRed Imaging Spectrometer - Next Generation (AVIRIS-NG) collected as part of the SBG High-Frequency Time Series (SHIFT) campaign as a case study. Airborne data were collected weekly during the spring of 2022 across two natural reserves in California. Field spectra were gathered from blooming plots at leaf, flower, and canopy levels at two time points during the campaign. The processed data was used to investigate flowering species' spectro-temporal variation and spatial distribution using Spectral Mixture Residual, Gaussian clustering techniques, and a proposed narrow-band flowering index. Linear spectral unmixing allowed the computation of the weighted contribution of four major high-variance endmembers (leaves, flowers, soil, dark) and low-variance residual signal that comprises subtle spectral features used to track biophysical processes. The reflectance residual was projected on a low principal component basis to characterize flowering clusters' variation and spatial distribution based on the Gaussian mixture model, providing an uncertainty metric to assess the results. Mapping flowering events from modeling spectro-temporal dynamics throughout the season, from pre-blooming to post-flowering stages, allowed us to identify gradient variations in spectral features within the VSWIR spectral range linked to flowering pigments. Time series of the Mixture Residual Blooming Index and the Red-Edge Normalized Difference Vegetation Index revealed specific flowering and greenness phenophases across the two main species (Coreopsis gigantea, Artemisia californica) in the flowering areas. Overall, our approach opens opportunities for future satellite monitoring of floral cycles at broader scales.

Yoseline Angel↗

On Digital Simulation of Multicorrelated Random Processes and Its Applications

Two methods are described to simulate, on a digital computer, a set of correlated, stationary, and Gaussian time series with zero mean from the given matrix of power spectral densities and cross spectral densities. The first method is based upon trigonometric series with random amplitudes and deterministic phase angles. The random amplitudes are generated by using a standard random number generator subroutine. An example is given which corresponds to three components of wind velocities at two different spatial locations for a total of six correlated time series. In the second method, the whole process is carried out using the Fast Fourier Transform approach. This method gives more accurate results and works about twenty times faster for a set of six correlated time series.

Sinha, A. K.↗

Ignition of Cellulosic Paper at Low Radiant Fluxes

The ignition of cellulosic paper by low level thermal radiation is investigated. Past work on radiative ignition of paper is briefly reviewed. No experimental study has been reported for radiative ignition of paper at irradiances below 10 Watts/sq.cm. An experimental study of radiative ignition of paper at these low irradiances is reported. Experimental parameters investigated and discussed include radiant power levels incident on the sample, the method of applying the radiation (focussed vs. diffuse Gaussian source), the presence and relative position of a separate pilot ignition source, and the effects of natural convection (buoyancy) on the ignition process in a normal gravity environment. It is observed that the incident radiative flux (in W/sq.cm) has the greatest influence on ignition time. For a given flux level, a focussed Gaussian source is found to be advantageous to a more diffuse, lower amplitude, thermal source. The precise positioning of a pilot igniter relative to gravity and to the fuel sample affects the ignition process, but the precise effects are not fully understood. Ignition was more readily achieved and sustained with a horizontal fuel sample, indicating the buoyancy plays a role in the ignition process of cellulosic paper. Smoldering combustion of doped paper samples was briefly investigated, and results are discussed.

White, K. Alan↗

Smoother Surfaces Enhance Diffusion of Nanorods in Entangled Polymer Melts

Coarse-grained molecular dynamics simulations are used to study the diffusion of thin nanorods in entangled polymer melts for varying nanorod length and roughness. While prior studies observed a nanorod parallel diffusion constant scaling inversely with rod length D ∥ ~ l –1 , here, we show that this scaling is not universal and depends sensitively on the nanorod surface roughness. We observe D ∥ ~ l –k , where k < 1 and decreases with decreasing surface roughness. The weaker scaling is driven by the non-Gaussian diffusion of nanorods due to the emergence of an intermittent hopping process that becomes more pronounced with decreasing roughness at the monomer scale. Analysis shows that the mean hop size grows for smoother rods but shows little to no variation with rod length. The mean hopping frequency shows no dependence on either rod length or roughness, suggesting it originates from the polymer melt environment. Further, our results show that the small-scale features of the nanorod surface strongly influence the large-scale and long-time transport of nanorods in polymer matrices, creating new material design opportunities for precisely engineered nanocomposites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

SUPERDIFFUSIVE SHOCK ACCELERATION

The theory of diffusive shock acceleration is extended to the case of superdiffusive transport, i.e., when the mean square deviation grows proportionally to t{sup {alpha}}, with {alpha} > 1. Superdiffusion can be described by a statistical process called Levy random walk, in which the propagator is not a Gaussian but it exhibits power-law tails. By using the propagator appropriate for Levy random walk, it is found that the indices of energy spectra of particles are harder than those obtained where a normal diffusion is envisaged, with the spectral index decreasing with the increase of {alpha}. A new scaling for the acceleration time is also found, allowing substantially shorter times than in the case of normal diffusion. Within this framework we can explain a number of observations of flat spectra in various astrophysical and heliospheric contexts, for instance, for the Crab Nebula and the termination shock of the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Primordial non-Gaussianities with weak lensing: information on non-linear scales in the Ulagam full-sky simulations

Abstract Primordial non-Gaussianities (PNGs) are signatures in the density field that encode particle physics processes from the inflationary epoch. Such signatures have been extensively studied using the Cosmic Microwave Background, through constraining their amplitudes,f X NL , with future improvements expected from large-scale structure surveys; specifically, the galaxy correlation functions. We show that weak lensing fields can be used to achieve competitive and complementary constraints. This is shown via theUlagamsuite of N-body simulations, a subset of which evolves primordial fields with four types of PNGs. We create full-sky lensing maps and estimate the Fisher information from three summary statistics measured on the maps: the moments, the cumulative distribution function, and the 3-point correlation function. We find that the year 10 sample from the Rubin Observatory Legacy Survey of Space and Time (LSST) can constrain PNGs toσ(f NL eq ) ≈ 110,σ(f NL or, lss ) ≈ 120,σ(f NL loc ) ≈ 40. For the former two, this is better than or comparable to expected galaxy clustering-based constraints from the Dark Energy Spectroscopic Instrument (DESI). The PNG information in lensing fields is on non-linear scales and at low redshifts (z≲ 1.25), with a clear origin in the evolution history of massive halos. The constraining power degrades by ∼60% under scale cuts of ≳ 20 Mpc, showing there is still significant information on scales mostly insensitive to small-scale systematic effects (e.g., baryons). We publicly release theUlagamsuite to enable more survey-focused analyses.

Astronomy & Astrophysics↗