Search NASA⌕ Search

SEARCH · Search NASA

Results for “Identification problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Crop identification and acreage measurement utilizing ERTS imagery

The author has identified the following significant results. Results of temporal overlays, equal and unequal prior probabilities, and independent test data are discussed. The amount of improvement that each technique contributed are summarized: (1) Results in Missouri where temporal overlays were made, show that temporal information improved the overall classification by 10%. (2) The dates were not optimum that were overlaid. (3) Data analysis in both Missouri and Idaho indicates that the use of prior probabilities improves the overall classification rates by at least 10% overusing the assumption that the crops are all equally likely. (4) Using both procedures together indicates that overall performance can be improved by 20% over one data and equal prior probabilities. (5) Idaho data has banding problems that may have caused serious problems in the crop classification. (6) The twelve crop types in Idaho seem to be quite similar spectrally, and hence, classification is quite difficult. (7) ERTS may not contain enough information to have perfect classification, but the data may still be useful for making crop acreage estimates. (8) Remotely sensed data could be used with a regression estimator if there is a correlation between ground data and classification results. (9) Remotely sensed data could be used with a double sample model.

Vonsteen, D. H.↗

Calculations of energies, transition rates, and lifetimes for the fluorine-like isoelectronic sequence with Z=31−35

Employing two state-of-the-art methods, multiconfiguration Dirac–Hartree–Fock and second-order many-body perturbation theory, highly accurate calculations are performed for the lowest 200 fine-structure levels arising from the 2l{sup 7},2l{sup 6}3l{sup ′} and 2l{sup 6}4l{sup ′} configurations of the fluorine-like isoelectronic sequence with Z=31−35. Complete and consistent atomic data, including excitation energies, lifetimes, wavelengths, and E1, E2, M1, M2 line strengths, oscillator strengths, and transition rates among these 200 levels are provided. Comparisons are made between the present two data sets, as well as with other available experimental and theoretical values. The present data are accurate enough for identification and deblending of emission lines involving the n=3,4 levels, and are also useful for modeling and diagnosing fusion plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗

Cas9 Protein Post-translational Modifications (PTMs): A Potential Biomarker of Gene-editing

The clustered regularly interspaced short palindromic repeats (CRISPR) arrays and the CRISPR associated (Cas) proteins comprise a prevalent prokaryotic and archaeal adaptive immune system. The CRISPR/Cas9 system has been coopted for and become the ubiquitous gene-editing system due to the simplicity of requiring minimally the CRISPR RNA components and Cas9 protein for specific DNA sequence alteration. CRISPR/Cas9 has been extensively used for gene-editing a wide range of species with human patient trails currently underway. However, unsanctioned genome editing is a national security and public health threat that can cause serious permanent illness and death as well as having the potential for very long-lasting effects over generations due to genetic inheritance of the gene-edit. While the Cas9 protein would appear as a highly specific indicator of exposure to gene-editing reagents, the bacterial origins of CRISPR/Cas9 creates a daunting problem for detection. Bacterial Cas9 would then generate false-positives for detecting gene-editing by conventional molecular biology techniques. Antibody-based assays for Cas9 would be unable to distinguish between Cas9 expressed in human cells for gene-editing and highly common unrelated Cas9 from bacterial infections. Posttranslational modifications of proteins are highly cell specific and hold the potential for discerning the cellular origins of a Cas9 protein and the differentiating between bacterial and gene-editing CRISPR/Cas9. The work described herein is in progress towards the identification of Cas9 post-translational modifications from bacterial and human cell expressed Cas9.

59 BASIC BIOLOGICAL SCIENCES↗

NASA Tech Briefs, June 2007

Topics covered include: High-Accuracy, High-Dynamic-Range Phase-Measurement System; Simple, Compact, Safe Impact Tester; Multi-Antenna Radar Systems for Doppler Rain Measurements; 600-GHz Electronically Tunable Vector Measurement System; Modular Architecture for the Measurement of Space Radiation; VLSI Design of a Turbo Decoder; Architecture of an Autonomous Radio Receiver; Improved On-Chip Measurement of Delay in an FPGA or ASIC; Resource Selection and Ranking; Accident/Mishap Investigation System; Simplified Identification of mRNA or DNA in Whole Cells; Printed Multi-Turn Loop Antennas for RF Biotelemetry; Making Ternary Quantum Dots From Single-Source Precursors; Improved Single-Source Precursors for Solar-Cell Absorbers; Spray CVD for Making Solar-Cell Absorber Layers; Glass/BNNT Composite for Sealing Solid Oxide Fuel Cells; A Method of Assembling Compact Coherent Fiber-Optic Bundles; Manufacturing Diamond Under Very High Pressure; Ring-Resonator/Sol-Gel Interferometric Immunosensor; Compact Fuel-Cell System Would Consume Neat Methanol; Algorithm Would Enable Robots to Solve Problems Creatively; Hypothetical Scenario Generator for Fault-Tolerant Diagnosis; Smart Data Node in the Sky; Pseudo-Waypoint Guidance for Proximity Spacecraft Maneuvers; Update on Controlling Herds of Cooperative Robots; and Simulation and Testing of Maneuvering of a Planetary Rover.

Source record↗

Challenges in Vehicle Safety and Occupant Protection for Autonomous Electric Vertical Take-Off and Landing (eVTOL) Vehicles

The burgeoning electric Vertical Take-off and Landing (eVTOL) vehicle industry has generated a significant level of enthusiasm amongst aviation designers, manufacturers and researchers. This industry is determined to change the urban transportation paradigm from traditional ground-based vehicles (cars, taxis, buses) to air-based eVTOL vehicles which can be summoned, much like how conventional taxi services work currently. These new eVTOL vehicles are designed to be small and lightweight and operate autonomously without user intervention. There are many unknowns as to how the industry will mature. The logistics of creating a completely new category of vehicle along with its own set of rules are complex, and there are many known - and unknown - barriers to overcome. Some (of many) known barriers include airspace management, ground logistics, physical space, and, the vehicle design itself. There are many eVTOL vehicle manufacturers and organizations working these problems presently. This report will focus on one major barrier: the level of safety as it pertains to the framework of eVTOL vehicles. A high level of safety is necessary for the vehicles to gain acceptance as the public adapts to these autonomous ride-sharing services. An overview of current levels of transportation safety and some extrapolation into how eVTOL vehicles might compare is first presented. Next, a discussion categorizing the major differences between Crash Prevention and Crash Mitigation as it pertains to eVTOL vehicle safety is included with identification of current deficiencies. The report then expands into a framework for specific ideas that could use Crash Mitigation to improve vehicle safety through a crashworthy systems level approach with several designs highlighted. Finally, a brief discussion into the regulatory approach and potential guidelines as they pertain to new eVTOL vehicles is presented. Accordingly, much of the supplemental data will be taken from sources pertaining to either General Aviation (GA) aircraft, rotorcraft, or transport category aircraft, due to the lack of overarching data from eVTOL vehicles. As of this writing, the European Aviation Safety Agency has released a draft version of a VTOL Special Condition, with a comment period closing in late 2018. It is assumed that eventual expected operations and anticipated future regulations for VTOL vehicles will consist of some combination of these (and other) sources.

Littell, Justin D.↗

Improving the Discovery Power of the Dark Energy Survey Gravitational Wave Program in Its Fourth Observing Campaign

The universe is growing at an accelerated rate, yet the several experiments and science cases used to measure this property yield conflicting results for the rate. Known colloquially as the Hubble tension problem, this discrepancy calls for a novel measurement of the Hubble Constant, H0, in order to be resolved. The Dark Energy Survey Gravitational Wave group (DESGW) aims to relieve this tension by performing a standard sirens measurement of H0 independent of traditional methods. To do so in the current era of data abundance and limited telescope time demands a robust, optimized, and complete science software pipeline to carefully balance the transition from gravitational wave data to state-of-the-art images, images to photometric data, and photometric data to identification and analysis of electromagnetic counterparts to gravitational wave signals. This thesis details the contributions of the author to the DESGW Search & Discovery Pipeline for the fourth observing run of the LIGO/Virgo/KAGRA gravitational wave detector network, as well as the science applications that have been pursued.

79 ASTRONOMY AND ASTROPHYSICS↗

Geometric deep learning of RNA structure

RNA molecules adopt three-dimensional structures that are critical to their function and of interest in drug discovery. Few RNA structures are known, however, and predicting them computationally has proven challenging. We introduce a machine learning approach that enables identification of accurate structural models without assumptions about their defining characteristics, despite being trained with only 18 known RNA structures. The resulting scoring function, the Atomic Rotationally Equivariant Scorer (ARES), substantially outperforms previous methods and consistently produces the best results in community-wide blind RNA structure prediction challenges. By learning effectively even from a small amount of data, our approach overcomes a major limitation of standard deep neural networks. Because it uses only atomic coordinates as inputs and incorporates no RNA-specific information, this approach is applicable to diverse problems in structural biology, chemistry, materials science, and beyond.

Townshend, Raphael J. L.↗

Video Compression Routines Final Report CRADA No. TSB-1183-95

The purpose of this CRADA was to establish a framework for LLNL and NOVA Management, Inc. to Cooperatively develop video compression routines to be used to condense maintenance documentation provided on computers issued to Army mechanics to help them diagnose and repair equipment faults. In the past, paper technical manuals were the only means of communicating fault isolation, diagnostics and repair action information to maintenance personnel. The need for this information was at the weapon system itself as well as at the maintenance depot. This project addressed the need for means of efficient storage and retrieval of video (bandwidth issue) by maintenance personnel as they moved through the diagnostic procedures. Several research and development projects have employed interactive stored video as a means of providing maintenance information to the soldier. The problem with this approach was the massive data storage requirement. The overall objective of the project was to develop fast decompression and playback routines for full motion, coIor video. A survey was done of existing standards and potential new routines and techniques for video compression and playback to determine which were suitable for use on the CTS. Playback speeds were preferred to beat 30 frames per second on the target architecture. Compression ratios were expected to store several minutes of synchronized video in 1 MB. Playback routines were Windows 3.1 compatible. Identification of any hardware upgrades associated with playback were made when necessary. A demonstration of existing LLNL algorithms for still frame decompression which represented a current benchmark of data compression performance was completed. NOVA Management and LLNL used some of the compression technologies developed or currently being developed at LLNL to address the requirements of this SBIR. LLNL started by evaluating current compression technologies or combinations thereof to estimate the best compression ratio LLNL could achieve at this stage. LLNL ported some of our software from the SUN workstation environment to the PC or equivalent environment (e.g., MAC) so as to closely match the computer environment suggested by the Army. Finally, LLNL designed and outlined new algorithms to meet the desired video compression of CTS.

97 MATHEMATICS AND COMPUTING↗

Active Blade Vibration Control Being Developed and Tested

Gas turbine engines are currently being designed to have increased performance, lower weight and manufacturing costs, and higher reliability. Consequently, turbomachinery components, such as turbine and compressor blades, have designs that are susceptible to new vibration problems and eventual in-service failure due to high-cycle fatigue. To address this problem, researchers at the NASA Glenn Research Center are developing and testing innovative active blade vibration control concepts. Preliminary results of using an active blade vibration control system, involving a rotor supported by an active magnetic bearing in Glenn's Dynamic Spin Rig, indicate promising results (see the photograph). Active blade vibration control was achieved using feedback of blade strain gauge signals within the magnetic bearing control loop. The vibration amplitude was reduced substantially (see the graphs). Also, vibration amplitude amplification was demonstrated; this could be used to enhance structural mode identification, if desired. These results were for a nonrotating two-bladed disk. Tests for rotating blades are planned. Current and future active blade vibration control research is planned to use a fully magnetically suspended rotor and smart materials. For the fully magnetically suspended rotor work, three magnetic bearings (two radial and one axial) will be used as actuators instead of one magnetic bearing. This will allow additional degrees of freedom to be used for control. For the smart materials work, control effectors located on and off the blade will be considered. Piezoelectric materials will be considered for on-the-blade actuation, and actuator placement on a stator vane, or other nearby structure, will be investigated for off-the-blade actuation. Initial work will focus on determining the feasibility of these methods by performing basic analysis and simple experiments involving feedback control.

Johnson, Dexter↗

Measure problem in cosmology

The Hamiltonian structure of general relativity provides a natural canonical measure on the space of all classical universes, i.e., the multiverse. We review this construction and show how one can visualize the measure in terms of a 'magnetic flux' of solutions through phase space. Previous studies identified a divergence in the measure, which we observe to be due to the dilatation invariance of flat Friedmann-Lemaitre-Robertson-Walker universes. We show that the divergence is removed if we identify universes which are so flat they cannot be observationally distinguished. The resulting measure is independent of time and of the choice of coordinates on the space of fields. We further show that, for some quantities of interest, the measure is very insensitive to the details of how the identification is made. One such quantity is the probability of inflation in simple scalar field models. We find that, according to our implementation of the canonical measure, the probability for N e-folds of inflation in single-field, slow-roll models is suppressed by of order exp(-3N) and we discuss the implications of this result.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Discovery of optimal zeolites for challenging separations and chemical transformations using predictive materials modeling

Zeolites play numerous important roles in modern petroleum refineries and have the potential to advance the production of fuels and chemical feedstocks from renewable resources. The performance of a zeolite as separation medium and catalyst depends on its framework structure. To date, 213 framework types have been synthesized and >330000 thermodynamically accessible zeolite structures have been predicted. Hence, identification of optimal zeolites for a given application from the large pool of candidate structures is attractive for accelerating the pace of materials discovery. Here we identify, through a large-scale, multi-step computational screening process, promising zeolite structures for two energy-related applications: the purification of ethanol from fermentation broths and the hydroisomerization of alkanes with 18-30 carbon atoms encountered in petroleum refining. Finally, these results demonstrate that predictive modeling and data-driven science can now be applied to solve some of the most challenging separation problems involving highly non-ideal mixtures and highly articulated compounds.

36 MATERIALS SCIENCE↗

Earth's magnetosphere - Global problems in magnetospheric plasma physics

Magnetospheric physics is presently in a transition from the exploratory stage to one in which satellite missions and ground-based observations are planned with the specific object of achieving a global understanding and self-consistent quantitative description of the cause-and-effect relationship among the principal dynamic processes involved. Measurements turn to lower and lower energies and to higher ion mass species, in order to encompass the entire particle population, and to a broader range of the frequency spectrum of magnetic and electric field variations. In the present paper, the current status of our knowledge on magnetospheric plasma physics is reviewed, with particular reference of such fundamental advances as the discovery of layers of streaming plasma in the magnetosphere beneath its boundary surface, the identification of the terrestrial magnetosphere as a celestial source of kilometric radiation and relativistic particles, the identification of parallel electric field regions within the magnetosphere and their role in auroral particle acceleration, and the discovery of large fluxes of energetic heavy ions trapped in the magnetosphere.

Roederer, J. G.↗

Neural Network Identification For a C5 Parallel Robot

This paper presents the design and analysis of a neural network-based identification of the inverse dynamic model of a C5 parallel robot. The identification structure is designed using the black box form (the dynamic model is completely unknown). This identification uses real data acquired on the C5 parallel robot by applying a nominal control scheme (PD). The desired trajectories of this scheme are based on Fourier series and the coefficients are chosen in a heuristic way. We have used this type of desired trajectories to obtain exciting trajectories for identification procedure. Three identification schemes are tested and compared. The comparison is performed based on the number of parameters used in each architecture and the quality of the generalization error. The used neural network is of MLP type and composed of one hidden layer.

42 ENGINEERING↗

The present status of remote sensing in the United Nations, 8 April 1977

Problems arising from remote sensing of the earth by satellites have been the subject of indepth research and analysis by the United Nations. Every aspect of this multidisciplinary subject has been explored in more than 100 reports and papers published as UN documents dealing with all the implications of remote sensing: scientific, technological, institutional, political, economic, cultural, and legal. National, regional and international situations have been analyzed, and the General Assembly has passed resolutions requesting that the Committee on the Peaceful Uses of Outer Space give a high priority to remote sensing. The identification and analysis of issues has been going on for several years, the objective being international agreement on general principles to guide nations in the conduct of their remote sensing activities.

Galloway, E.↗

Fracture resistance development in ceramic composites with nonlinear fiber pullout relationship

This paper addresses the fracture resistance mechanism in fiber reinforced ceramics, and focuses attention on the specific effects associated with nonlinear nature of the fiber pullout mechanism. The model is based on a consideration of the representative boundary value problem typical for the bridging process. The theoretical solution includes an accurate account of the nonlinear fiber matrix friction. The developed approach allows consideration of several types of nonlinear fiber pullout-force dependence. The distinct features of the nonlinear process demonstrate that, contrary to the linear case, the universal fracture resistance curves cannot be developed in cases with significant nonlinear contribution in the fiber friction law. The resulting resistance curves depend strongly on the absolute values of the matrix fracture toughness. On the other hand, these distinct patterns may be used for identification of the particular friction law and determination of the friction parameters.

Rubinstein, Asher A.↗

Sea ice feature and type identification in merged ERS-1 SAR and LANDSAT Thematic Mapper imagery

LANDSAT Thematic Mapper (TM) and ERS-1 SAR (Synthetic Aperture Radar) C band images were acquired for the same area in the Beaufort Sea, 18 Apr. 1992. The two images were co-located to the same grid (25 m resolution) and supervised classification was performed on the TM channel 3 scene in order to classify open water, nilas, grey ice, first year ice, and multiyear ice. Comparison of the LANDSAT classification and the corresponding dB values from the SAR scene showed that, under the given circumstances (high surface winds), open water/nilas/grey ice as defined by a single ice category by the SAR classifier could not be distinguished from first year ice. Surface roughening due to wind appears to be a major problem for the SAR classifier, as the range of the dB values is large enough to overlap all the other ice categories. Additional information, such as surface wind speed is necessary to overcome part of this problem.

Steffen, K.↗

Systems identification using a modified Newton-Raphson method: A FORTRAN program

A FORTRAN program is offered which computes a maximum likelihood estimate of the parameters of any linear, constant coefficient, state space model. For the case considered, the maximum likelihood estimate can be identical to that which minimizes simultaneously the weighted mean square difference between the computed and measured response of a system and the weighted square of the difference between the estimated and a priori parameter values. A modified Newton-Raphson or quasilinearization method is used to perform the minimization which typically requires several iterations. A starting technique is used which insures convergence for any initial values of the unknown parameters. The program and its operation are described in sufficient detail to enable the user to apply the program to his particular problem with a minimum of difficulty.

Taylor, L. W., Jr.↗

CONSTRAINING THE PROPERTIES OF DELTA SCUTI STARS USING SPECTROSCOPIC ECLIPSING BINARY SYSTEMS

Many stars exhibit stellar pulsations, favoring them for asteroseismic analyses. Interpreting the oscillations requires some knowledge of the oscillation mode geometry (spherical degree, radial, and azimuthal orders). The {delta} Scuti stars (1.5-2.5 M{sub sun}) often show just one or few pulsation frequencies. Although this may promise a successful seismological analysis, we may not know enough about either the mode or the star to use the oscillation frequency to improve the determination of the stellar model or to probe the star's structure. For the observed frequencies to be used successfully as seismic probes of these objects, we need to concentrate on stars for which we can reduce the number of free parameters in the problem, such as binary systems or open clusters. We investigate how much our understanding of a {delta} Scuti star is improved when it is in a detached eclipsing binary system instead of being a single field star. We use singular value decomposition to explore the precision we expect in stellar parameters (mass, age, and chemical composition) for both cases. We examine how the parameter uncertainties propagate to the luminosity-effective temperature diagram and determine when the effort of obtaining a new measurement is justified. We show that for the single star, a correct identification of the oscillation mode is necessary to produce strong constraints on the stellar model properties, while for the binary system the observations without the pulsation mode provide the same or better constraints on the stellar parameters. In the latter case, the strong constraints provided by the binary system not only allow us to detect an incorrectly identified oscillation mode, but we can also constrain the oscillation mode geometry by comparing the distribution of possible solutions with and without including the oscillation frequency as a constraint.

79 ASTRONOMY AND ASTROPHYSICS↗