Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC INSULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Detection of impurity diamagnetic susceptibility and its behavior in n-Ge:As in the region of the insulator–metal phase transition

The method of superconducting quantum interference device (SQUID) magnetometry is used to measure and study low-temperature (T ≤ 100K) susceptibility in a series of samples of heavily doped Ge:As samples on the insulator side of the insulator–metal phase transition. Subtracting the known values of the magnetic susceptibility of the lattice from the measurement results, the values of the impurity magnetic susceptibility of the system are obtained. Using the method of electron spin resonance, the paramagnetic component of the impurity susceptibility is determined. Subtraction of the paramagnetic component from the total impurity susceptibility is used to obtain, for the first time, the values of the impurity diamagnetic susceptibility (∼5 × 10{sup –8} cm{sup 3}/g). The obtained result is consistent with estimates obtained for the localization radius of an electron at an As donor. Lowering the temperature to T ≤ 4 K leads to an increase in the diamagnetic susceptibility, which is consistent with the observed increase in the paramagnetic susceptibility. The observed effect is accounted for by the transition of impurity electrons from the singlet state to the triplet one.

36 MATERIALS SCIENCE↗

High pO2 Flux Growth and Characterization of NdNiO3 Crystals

Single crystals of the perovskite nickelate NdNiO3 with dimensions of up to 50 μm on edge have been successfully grown using the flux method at a temperature of 400 °C and oxygen pressure of 200 bar. The crystals were investigated by a combination of techniques, including high-resolution synchrotron X-ray single-crystal and powder diffraction and physical property measurements such as magnetic susceptibility and resistivity. Resistivity measurements revealed a metal-insulator transition (MIT) at TMIT~180 K with apparent thermal hysteresis; however, no superlattice peaks or peak splitting below TMIT, which corresponds to a structural transition from Pbnm to P21/n, was observed. The successful growth of NdNiO3 crystals at relatively low temperatures and oxygen pressure provides an alternative approach for preparing single crystals of interesting perovskites such as RNiO3 (R = Sm-Lu) and parent phases of superconducting square planar nickelates.

Wang, Xiaoli↗

Terahertz Landau level spectroscopy of Dirac fermions in millimeter-scale twisted bilayer graphene

Exotic electronic physics including correlated insulating states and fractional Chern insulators have been observed in twisted bilayer graphene in a magnetic field when the Fermi velocity vanishes, however a question remains as to the stability of these states which is controlled by the gap to the first excited state. Free-space terahertz magneto-optics can directly probe the gap to charge excitations which bounds the stability of electronic states, but this measurement has thus-far been inaccessible due to the micron size of twisted bilayer graphene samples, while the wavelength of terahertz light is up to a millimeter. Here we leverage advances in fabrication to create twisted bilayer graphene samples over 5 mm x 5 mm in size with a uniform twist angle and study the magnetic field dependence of the cyclotron resonance by a complex Faraday rotation experiment in p-doped large angle twisted bilayer graphene. These measurements directly probe charge excitations in inter-Landau level transitions and determine the Fermi velocity as a function of twist angle.

36 MATERIALS SCIENCE↗

Theory of the spin-Seebeck effect at a topological-insulator/ferromagnetic-insulator interface

The spin-Seebeck effect refers to voltage signals induced in metals by thermally driven spin currents in adjacent magnetic systems. We present a theory of the spin-Seebeck signal in the case where the conductor that supports the voltage signal is the topologically protected two-dimensional surface-state system at the interface between a ferromagnetic insulator (FI) and a topological insulator (TI). Our theory uses a Dirac model for the TI surface states and assumes Heisenberg exchange coupling between the TI quasiparticles and the FI magnetization. The spin-Seebeck voltage is induced by the TI surface states scattering off the nonequilibrium magnon population at the surface of the semi-infinite thermally driven FI. Our theory is readily generalized to spin-Seebeck voltages in any two-dimensional conductor that is exchange-coupled to the surface of a FI. Surface-state carrier-density-dependent signal strengths calculated using Bi 2 Te 3 and yttrium iron garnet material parameters are consistent with recent experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic, transport and magnetoresistance behavior of Ni doped La{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} (0.00≤x≤0.09) system

The magnetic, electrical and magnetoresistance behavior of Ni doped La{sub 2/3}Sr{sub 1/3}Mn{sub 1−x}Ni{sub x}O{sub 3} (0.00≤x≤0.09) samples have been studied systematically. Rietveld analysis of XRD shows the formation of pure crystalline phase with rhombohedral symmetry. It has been found that with increasing Ni concentration, magnetization, resistivity, magnetoresistance (MR), Curie temperature (T{sub c}) and metal–insulator transition temperature of the samples changes drastically. Doping of Ni at Mn site shows an inverse behavior of %MR at 300 K and 77 K. Further study revealed that all samples show a low field magnetoresistance at low temperature (77 K) which found to increase with the increase of Ni doping. Further, X-ray photoelectron spectrum (XPS) confirms the ionic state of Ni to be Ni{sup 2+}. In the light of this study, we can say that Ni doped La{sub 0.67}Sr{sub 0.33}MnO{sub 3} can be synthesized with fine tuning of the dopant ion to bring down T{sub c} further for its application in Magnetic Hyperthermia. - Graphical abstract: The magnetic, electrical and magnetoresistance behavior of Nickel doped La{sub 2/3}Sr{sub 1/3}Mn{sub 1−x}Ni{sub x}O{sub 3} (0.00≤x≤0.09) samples have been studied systematically. Highlights: • Ni doped La{sub 2/3}Sr{sub 1/3}Mn{sub 1−x}Ni{sub x}O{sub 3} samples synthesized by solid state reaction route. • Studied the magnetic, electrical and magnetoresistance behavior of the samples. • T{sub c} of the samples decreases whereas resistivity increases with Ni doping. • Samples show excellent properties for magnetic Hyperthermia application.

36 MATERIALS SCIENCE↗

The first-order structural transition in NiO at high pressure

Insulator-metal transition in NiO and concomitant collapse of spin and magnetism in the material are important subjects in studies of strong electronic correlations and as such they generate multiple theoretical and experimental efforts aimed at understanding the complicated physics of strongly correlated electronic systems. We report here the iso-structural transition in NiO accompanying the previously observed by us transition to the metallic state. These findings resolve some experimental controversies regarding the transition. We also discuss the latest theoretical results in detail and show that our data confirm some recent theoretical models. Given the simplicity of the material and its fundamental importance to the understanding of strongly correlated electronic systems, our findings should stimulate further experimental and theoretical efforts to understand this prototype Mott insulator.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spinons and damped phonons in the spin- 1 2 quantum liquid Ba 4 Ir 3 O 10 observed by Raman scattering

In spin-1/2 Mott insulators, nonmagnetic quantum liquid phases are often argued to arise when the system shows no magnetic ordering, but identifying positive signatures of these phases or related spinon quasiparticles can be elusive. Here, we use Raman scattering to provide three signatures for spinons in a possible spin-orbit quantum liquid material Ba 4 Ir 3 O 10 : (1) a broad hump, which we show can arise from Luttinger liquid spinons in Raman with parallel photon polarizations normal to one-dimensional chains; (2) strong phonon damping from phonon-spin coupling via the spin-orbit interaction; and (3) the absence of (1) and (2) in the magnetically ordered phase that is produced when 2% of Ba is substituted by Sr [(Ba 0.98 Sr 0.02 ) 4 Ir 3 O 10 ]. Furthermore, the phonon damping via itinerant spinons seen in this quantum liquid insulator suggests a mechanism for enhancing thermoelectricity in strongly correlated conductors, through a neutral quantum liquid that need not affect electronic transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High pO(2) Floating Zone Crystal Growth of the Perovskite Nickelate PrNiO3

Single crystals of PrNiO3 were grown under an oxygen pressure of 295 bar using a unique high-pressure optical-image floating zone furnace. The crystals, with volume in excess of 1 mm(3), were characterized structurally using single crystal and powder X-ray di ff raction. Resistivity, specific heat, and magnetic susceptibility were measured, all of which evidenced an abrupt, first order metal-insulator transition (MIT) at similar to 130 K, in agreement with previous literature reports on polycrystalline specimens. Temperature-dependent single crystal di ff raction was performed to investigate changes through the MIT. Our study demonstrates the opportunity space for high fugacity, reactive environments for single crystal growth specifically of perovskite nickelates but more generally to correlated electron oxides.

floating zone method↗

Transition-metal phthalocyanine monolayers as new Chern insulators

To explore new materials for the realization of the quantum anomalous Hall effect (QAHE), we studied the electronic, magnetic and topological properties of transition-metal phthalocyanine (TMPc) monolayers in a square lattice. Many of them have large topologically nontrivial band gaps and integer Chern numbers. In particular, the Fermi level of MoPc lies right in the band gap (E g = 8.1 meV) and has large magnetic anisotropy energy (MAE = 2.0 meV per Mo atom) and a Curie temperature of 16 K, showing its usefulness for applications. The presence of the topologically protected edge state in a MoPc nanoribbon further confirms it as a new two-dimensional topological insulator. This much widens the search for QAHE materials for the design of quantum devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ambipolar and non-ambipolar diffusion in an rf plasma source containing a magnetic filter

By placing a magnetic filter across a rectangular plasma source (closed at one end with a ceramic plate and an rf antenna, and terminated at the opposite end by a grounded grid), we experimentally investigate the effect of conducting and insulating source walls on the nature of the plasma diffusion phenomena. The use of a magnetic filter creates a unique plasma, characterized by a high upstream electron temperature (T{sub e{sub u}}∼5 eV) near the rf antenna and a low downstream electron temperature (T{sub e{sub d}}∼1 eV) near the grid, which more clearly demonstrates the role of the source wall materials. For conducting walls a net ion current to ground is measured on the grid, and the plasma potential is determined by a mean electron temperature within the source. For insulating walls the plasma potential is determined by the downstream electron temperature (i.e., V{sub p}∼5.2T{sub e{sub d}} in argon), and the net current to the grid is exactly zero. Furthermore, by inserting a small additional upstream conductor (that can be made floating or grounded through an external circuit switch), we demonstrate that the plasma potential can be controlled and set to a low (V{sub p}∼5.2T{sub e{sub d}}), or high (V{sub p}∼5.2T{sub e{sub u}}) value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystals, magnetic and electronic properties of a new ThCr{sub 2}Si{sub 2}-type BaMn{sub 2}Bi{sub 2} and K-doped compositions

This is a report on the new 122 ternary transition-metal pnictide of BaMn{sub 2}Bi{sub 2}, which is crystallized from bismuth flux. BaMn{sub 2}Bi{sub 2} adopts ThCr{sub 2}Si{sub 2}-type structure (I4/mmm) with a=4.4902(3) Å and c=14.687(1) Å; it is antiferromagnetic with anisotropic magnetic susceptibility and semiconducting with a band gap of E{sub g}=6 meV. Heat capacity result confirms the insulating ground state in BaMn{sub 2}Bi{sub 2} with the electronic residual Sommerfeld coefficient of γ=0. The high temperature magnetization results show that magnetic ordering temperature is T{sub N} ∼400 K. Hole-doping in BaMn{sub 2}Bi{sub 2} via potassium in Ba{sub 1−x}K{sub x}Mn{sub 2}Bi{sub 2} results in metallic behavior for x=0.10(1), 0.32(1) and 0.36(1). With K-doping, more magnetically anisotropic behavior is observed. Although there is a downturn in electrical resistivity and low-field magnetization data below 4 K in>30%-doped crystals, there is no sign of zero resistance or diamagnetism. - Graphical abstract: Local moment antiferromagnet BaMn{sub 2}Bi{sub 2}, the first bismuthide with ThCr{sub 2}Si{sub 2} structure, turns metallic upon K-doping. Highlights: • BaMn{sub 2}Bi{sub 2} and Ba{sub 1−x}K{sub x}Mn{sub 2}Bi{sub 2} (0≤x<0.4) measuring up to 1 cm in length have been synthesized from Bi flux reactions. • BaMn{sub 2}Bi{sub 2} is the first bismuthide with ThCr{sub 2}Si{sub 2}-type structure. • BaMn{sub 2}Bi{sub 2} is a small gap semiconductor but, upon hole-doping, turns metallic with a downturn in resistivity below 4 K. • BaMn{sub 2}Bi{sub 2} is a local moment antiferromagnet with T{sub N} ∼400 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thin films of topological Kondo insulator candidate SmB 6 : Strong spin-orbit torque without exclusive surface conduction

The advent of topological insulators (TIs), a novel class of materials that harbor a metallic spin-chiral surface state coexisting with band-insulating bulk, opens up new possibilities for spintronics. One promising route is current-induced switching of an adjacent magnetic layer via spin-orbit torque (SOT), arising from the large spin-orbit coupling intrinsically possessed by TIs. The Kondo insulator SmB 6 has been recently proposed to be a strongly correlated TI, supported by the observation of a metallic surface state in bulk SmB 6 , as evidenced by the thickness independence of the low-temperature resistance plateau. We report the synthesis of epitaxial (001) SmB 6 /Si thin films and a systematic thickness-dependent electrical transport study. Although the low-temperature resistance plateau is observed for all films from 50 to 500 nm in thickness, the resistance is distinctively thickness-dependent and does not support the notion of surface conduction and interior insulation. On the other hand, we demonstrate that SmB 6 can generate a large SOT to switch an adjacent ferromagnetic layer, even at room temperature. The effective SOT generated from SmB 6 is comparable to that from β-W, one of the strongest SOT materials.

36 MATERIALS SCIENCE↗

Magnetism in Boron Nitride Monolayer Induced by Cobalt or Nickel Doping

We have investigated the electronic structure and magnetic properties of cobalt (Co)- or nickel (Ni)-doped hexagonal boron nitride (h-BN) monolayer using density functional theory calculations. The h-BN monolayer without any doping is a nonmagnetic insulator. Our studies show that isolated Co or Ni atom can both induce the local magnetic state in h-BN monolayer. And the impurity energy levels will be formed in the band gap. Results of our first-principle calculations reveal that isolated Co atom can result in a magnetic moment of 3.57 μ{sub B}, while the Ni atom is 0.87 μ{sub B}. And the magnetic moments mainly come from d orbitals of the doped atoms. The studies of magnetic coupling show that the two Co atoms at different distances in h-BN monolayer do not always couple ferromagnetically. When the distances are 2.504 and 6.625 Å, the spins induced by the two Co atoms will form antiferromagnetic ground states. While the two Ni atoms at different distances in the monolayer always couple ferromagnetically. So our results imply that the Ni-doped h-BN is more suitable for spintronic material than Co doping. These results are useful for spintronic application.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nb$_{3}$Sn Accelerator Magnets. Designs, Technologies and Performance

The goal of this book is to summarize and review the vast experience with Nb 3 Sn accelerator dipole magnets accumulated in the United States, Europe, and Asia since the discovery and production of Nb 3 Sn composite conductors. Interest in Nb 3 Sn accelerator magnets is soaring, and their further development is rapidly gaining momentum worldwide, thanks to the growing maturity of this technology and its great potential for particle accelerators used in high-energy physics. This book is intended to contribute to the transfer of the accumulated experience with the design, technology, and performance of such magnets in view of the challenging requirements set by the needs for ever-higher collision energies in future colliders. Engineers and physicists working in the field of particle accelerators, as well as students studying courses in particle accelerator physics and technologies, may find it an indispensable source of information on Nb 3 Sn accelerator magnets. Readers with a general interest in the history of science and technology may also find useful information that was obtained over a long period of time, from the late 1960s to the present day.

43 PARTICLE ACCELERATORS↗

Two-dimensional particle-in-cell simulations of transport in a magnetized electronegative plasma

Particle transport in a uniformly magnetized electronegative plasma is studied in two-dimensional (2D) geometry with insulating (dielectric) boundaries. A 2D particle-in-cell (PIC) code is employed, with the results compared to analytic one-dimensional models that approximate the end losses as volume losses. A modified oxygen reaction set is used to scale to the low densities used in PIC codes and also to approximately model other gases. The principal study is the limiting of the transverse electron flow due to strong electron magnetization. The plasma in the PIC calculation is maintained by axial currents that vary across the transverse dimension. For a cosine current profile nearly uniform electron temperature is obtained, which at the B-fields studied (600-1200 G) give a small but significant fraction (0.25 or less) of electron to negative ion transverse loss. For a more transverse-confined current, and approximating the higher mass and attachment reaction rate of iodine, the fraction of electron to negative ion transverse loss can be made very small. The models which have been constructed reasonably approximate the PIC results and indicate that the cross-field transport is nearly classical.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Study of Single Nb3Sn Quadrupole Coils Using a Magnetic Mirror Structure

Several 90-mm quadrupole coils made of 0.7-mm Nb{sub 3}Sn strand based on the 'Restack Rod Process' (RRP) of 108/127 design, with cored and non-cored cables and different cable insulation, were fabricated and individually tested at Fermilab using a test structure designed to provide a quadrupole magnetic field environment. The coils were instrumented with voltage taps and strain gauges to study quench performance and mechanical properties. The Nb{sub 3}Sn strand and cable parameters, the coil fabrication details, the mirror model assembly procedure and test results at temperatures of 4.5 K and 1.9 K are reported and discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Building Neutron Scattering Infrastructure in Louisiana for Advanced Materials (Final Report)

The main objective of the Louisiana Consortium for Neutron Scattering (LaCNS) is to build a major neutron scattering infrastructure capable of treating both soft and hard materials. The goal is to create a sustainable effort having the quality, breadth, and depth necessary to produce competitive proposals including collaborative and center type proposals. Our scientific aim is to understand the role of coupling in emergent complex materials and its impact on the structure/property relationship and to explore how to tune the key couplings to guide the design of materials with the desired properties. This naturally includes building a base of users of the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) in Louisiana; to train highly talented graduate and post-doctoral students in synthesis, neutron scattering, and simulation and modeling techniques, thereby helping to produce the next generation of scientist who use neutron scattering techniques as a crucial part of their research. The goal of our hard matter program is to understand the interplay between spin, charge, orbital, and lattice degrees of freedom in carefully selected complex materials. We have made considerable progress on number of complex systems including the oxide Sr3(Ru1-xMnx)2O7 where short-range magnetic ordering with anisotropic spin texture is initiated at the metal-insulator transition that clearly indicates a strong spin-charge coupling. Another critical area is in quantum materials. For example, in the topological semimetal BaMnSb2, we found a 3D canted antiferromagnetic Weyl semimetal with a 2D electronic structure and a nontrivial Berry phase. In addition, in the hexagonal chiral Mn1/3NbS2 system, we found soliton/soliton and soliton/antisoliton domain walls where the application of small fields or small currents can be used to control nanoscopic magnetic domains where the control of domain walls is crucially important for information storage. In addition, chemical transformation investigations were performed on the VISION instrument at Spallation Neutron Source (SNS). The soft matter effort was focused on understanding the role of non-covalent interactions on the structure and dynamics of fluid-based soft matter. One key focus was on sequence-defined (SD) amphiphilic peptoid polymers that allow encoding of molecular interactions and thereby systematic investigations of how charge directs the solution self-assembly of amphiphilic polymers in water. Another important area was on the dynamics of lipids self-assembled into membranes for exploring the permeability and mechanical using both neutron spin echo (NSE) spectroscopy and quasielastic neutron scattering (QENS) to distinguished between viscoelasticity and permeability at the molecular scale. Overall, the LaCNS project was quite successful, generating 145 publications and 245 presentations. Our graduate and post-doctoral students were well trained resulting in positions in national laboratories (Oak Ridge National Laboratory (ORNL), Argonne National Laboratory and Los Alamos National Laboratory), major research universities, and industry. We also developed a uniaxial pressure cell along with ORNL for SNS. A critical goal of this project was to establish a foundation for competing nationally in federally funded research programs. To this end, we were quite successful in generating over twenty-two federally and non-federally funded grants including awards from NSF, DOE, and DOD, and two early career awards. Equally important, we were able to secure a key major piece of instrumentation via a large ARO grant for a state-of-the-art electron microscope.

36 MATERIALS SCIENCE↗

Overview of recent studies and modifications being made to RHIC to mitigate the effects of a potential failure to the helium distribution system

In order to cool the superconducting magnets in RHIC, its helium refrigerator distributes 4.5 K helium throughout the tunnel along with helium distribution for the magnet line recoolers, the heat shield, and the associated return lines. The worse case for failure would be a release from the magnet distribution line which operates at 3.5 to 4.5 atmospheres and contains the energized magnet but with a potential energy of 70 MJoules should the insulation system fail or an electrical connection opens. Studies were done to determine release rate of the helium and the resultant reduction in O{sub 2} concentration in the RHIC tunnel and service buildings. Equipment and components were also reviewed for design and reliability and modifications were made to reduce the likelihood of failure and to reduce the volume of helium that could be released.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗