Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Production of Long-Lived H{sub 2}{sup -}, HD{sup -}, and D{sub 2}{sup -} during Grazing Scattering Collisions of H{sub 2}{sup +}, H{sub 3}{sup +}, D{sub 2}{sup +}, D{sub 3}{sup +} and D{sub 2}H{sup +} Ions with KBr, KCl, and LiF Surfaces

We have investigated atomic and molecular anion production from singly charged atomic and molecular hydrogen, deuterium, and mixed isotope beams during grazing interactions with large area KBr, KCl, and LiF single crystal targets in the incident energy range 4-22.5 keV. Electron capture and, in the case of incident molecular ions, dissociation occur during the grazing interactions without appreciable angular straggling or change in velocity. As a result, atomic and molecular cation and anion interaction products are strongly peaked in the specular reflection direction, and, in case of dissociation products, at the fractional kinetic energies determined by the product fragment mass to incident mass ratios. A large-acceptance electrostatic analysis and detection system is used to collect the charged scattering products with high efficiency. Of particular interest is the production of metastable molecular ions H{sub 2}{sup -}, HD{sup -}, and D{sub 2}{sup -}. By comparing molecular anion yields obtained from incident hydrogen, deuterium and mixed isotope molecular ions, effects arising from isobaric contamination are seen for some incident molecular species.

74 ATOMIC AND MOLECULAR PHYSICS↗

Radiation Resistance of Fluorite-Structured Nuclear Oxides

Fluorite-structure oxides are radiation-resistant materials making them ideal candidates for uses as nuclear fuels or as inert matrices for actinide transmutation. The radiation tolerance of urania and cubic zirconia single crystals was investigated by external ion irradiation in predominating domains of electronic and nuclear stopping of bombarding particles. Damage kinetics show that the behavior of the two investigated fluorite-type oxides is almost the same: (i) at low-energy a two-stage disordering process is exhibited--first a ballistic step due to the formation of radiation-induced defects and second a crystal fragmentation induced by the formation of gas bubbles at large concentration-; (ii) at high energy a one-stage damage kinetics associated with the formation of ion tracks whose overlapping at high fluence results in the formation of nanometer-sized domains with a small disorientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Patterned Exfoliation of GaAs Based on Masked Helium Implantation and Subsequent Rapid Thermal Annealing

A method of patterning single crystal GaAs based on ion implantation induced selective area exfoliation is suggested. Samples were implanted with 200-500 keV helium ions to a fluence range of 2-4x10{sup 16} He{sup +}/cm{sup 2} at room temperature through masks of Ni mesh (40 {mu}m opening) or stainless steel wire (50 {mu}m in diameter), and subsequent rapid thermal annealing at 350-500{open_square} resulted in expulsion of ion beam exposed material. The influences of ion energy, ion fluence, implantation temperature, subsequent annealing conditions (temperature and ramp rate), and mask pattern and its orientation with GaAs lattice on the patterned exfoliation were examined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation of X-Rays Using Uniaxially Polarized LiNbO{sub 3} Single Crystal

X-rays are radiated due to the bremsstrahlung caused by the collision of electrons with a metal target placed opposite the negative electric surface of a crystal by changing the temperature of a LiNbO{sub 3} single crystal uniaxially polarized in the c-axis direction. It is suggested that both electric field intensity and electron density determine the intensity of X-ray radiation. Electrons are supplied by the ionization of residual gas in space, field emission from a case inside which a crystal is located, considered to be due to the high electric-field intensity formed by the surface charges on the crystal, and an external electron source, such as a thermionic source. In a high vacuum, it was found that the electrons supplied by electric-field emission mainly contribute to the radiation of X-rays. It was found that the integrated intensity of X-rays can be maximized by supplying electrons both external and by electric-field emission. Furthermore, the integrated intensity of the X-rays is stable for many repeated temperature changes.

36 MATERIALS SCIENCE↗

Nature of Defects Induced by Au Implantation in Hexagonal Silicon Carbide Single Crystals

Pulsed-slow-positron-beam-based positron lifetime spectroscopy was used to investigate the nature of vacancy defects induced by 20 MeV Au implantation in single crystals 6H-SiC. Preliminary analysis of the data shows that at lower fluence, below 10{sup 14} cm{sup -2}, a positron lifetime of 220 ps has been obtained: it could be associated with the divacancy V{sub Si}-V{sub C} in comparison with the literature. At higher fluence, above 10{sup 15} cm{sup -2}, a positron lifetime of 260-270 ps, increasing with the incident positron energy, has been observed after decomposition of the lifetime spectra. By comparison with lifetime calculations, open-volumes such as quadrivacancy (V{sub Si}-V{sub C}){sub 2} clusters could be associated with this value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studies of Oxidation of the Cu(100) Surface Using Low Energy Positrons

Changes in the surface of an oxidized Cu(100) single crystal resulting from vacuum annealing have been investigated using positron annihilation induced Auger electron spectroscopy (PAES). PAES measurements show a large increase in the intensity of the positron annihilation induced Cu M{sub 2,3}VV Auger peak as the sample is subjected to a series of isochronal anneals in vacuum up to annealing temperature 300 deg. C. The intensity then decreases monotonically as the annealing temperature is increased to {approx}600 deg. C. Experimental PAES results are analyzed by performing calculations of positron surface states and annihilation probabilities of surface-trapped positrons with relevant core electrons taking into account the charge redistribution at the surface, surface reconstructions, and electron-positron correlations effects. Possible explanation for the observed behavior of the intensity of positron annihilation induced Cu M{sub 2,3}VV Auger peak with changes of the annealing temperature is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular Dynamics Simulations of Displacement Cascades in Single and Polycrystalline Zirconia

Displacement cascades in zirconia have been studied using classical molecular dynamics simulations. Polycrystalline zirconia with nano-meter grains were created using Voronoi polyhedra construction and studied in comparison with single crystalline zirconia. The results show that displacement cascades with similar kinetic energy generated larger number of displaced atoms in polycrystalline than in the single crystal structure. The fraction of atoms with coordination number change was also higher in polycrystalline zirconia that was explained to be due to the diffusion of oxygen and relaxation at grain boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation Effects in Binary and Multicomponent Solids

The report deals with damage kinetics, defect evolution and radiation response of binary and multicomponent solids irradiated with MeV electrons. Studies were made into such systems as metallic alloys, semiconductors, high-T{sub c} superconductors and bulk metallic glasses. The common features of the studies involve the efficient use of MeV dc electron beams as generators of point-like defects in solids, precise low-temperature (5-80 K) irradiation conditions, and, as a rule, in situ measurements of irradiated material parameters. To exemplify, successful investigations on the following topics are reported here: (1) Annealing of radiation defects in binary zirconium-base alloys. (2) Impact of defect density on electronic properties of nanocrystalline hydrogenated silicon. (3) Pinning process in high-T{sub c} YBa{sub 2}Cu{sub 3}O{sub 7-x} single crystals irradiated with MeV electrons. (4) Accumulation and recovery kinetics of radiation defects in bulk metallic glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular-dynamics simulations of stacking-fault-induced dislocation annihilation in prestrained ultrathin single-crystalline copper films

We report results of large-scale molecular-dynamics simulations of dynamic deformation under biaxial tensile strain of prestrained single-crystalline nanometer-scale-thick face-centered cubic (fcc) copper films. Our results show that stacking faults, which are abundantly present in fcc metals, may play a significant role in the dissociation, cross slip, and eventual annihilation of dislocations in small-volume structures of fcc metals. The underlying mechanisms are mediated by interactions within and between extended dislocations that lead to annihilation of Shockley partial dislocations or formation of perfect dislocations. Our findings demonstrate dislocation starvation in small-volume structures with ultrathin film geometry, governed by a mechanism other than dislocation escape to free surfaces, and underline the significant role of geometry in determining the mechanical response of metallic small-volume structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Plastic deformation of solid hydrogen in fusion targets

Current baseline designs of ignitable inertial confinement fusion targets require smooth layers of solid hydrogen held at a few degrees below the melting temperature on the inner surface of thin-walled spherical capsules. The initially smooth solid/vapor interface of a presumably single crystalline (hexagonal closed packed) hydrogen layer grown from melt develops undesirable roughness on cooling. We attribute such roughness to plastic deformation relieving thermal-contraction-induced elastic stresses. In particular, we identify two major contributors to roughness: surface bands of the basal slip systems and thermal grooves formed on deformation-produced low-angle grain boundaries. These findings have important implications for designing strategies aimed at controlling uniformity of the hydrogen fuel layer in fusion targets.

36 MATERIALS SCIENCE↗

Photoinduced conductivity in tin dioxide thin films

The effects of ultraviolet light irradiation on the conducting properties of SnO{sub 2-x} thin films grown epitaxially on TiO{sub 2} or Al{sub 2}O{sub 3} single-crystal substrates are studied at room temperature. A large increase in conductivity by two to four orders of magnitude is observed with light irradiation in an inert atmosphere and remains after the light is removed. The high-conducting state reverts to the original low-conducting state by exposing it to oxygen gas. These reversible phenomena are ascribed to the desorption and adsorption of negatively charged oxygen species at the grain boundaries, which critically change the mobility of electron carriers already present inside grains by changing the potential barrier height at the grain boundary. The UV light irradiation provides us with an easy and useful route to achieve a high-conducting state even at low carrier density in transparent conducting oxides and also to draw an invisible conducting wire or a specific pattern on an insulating film.

36 MATERIALS SCIENCE↗

Structural and cathodoluminescence properties of ZnO nanorods after Ga-implantation and annealing

Single-crystalline ZnO nanorods were implanted with 30 keV Ga{sup +} ions and fluences between 5x10{sup 12} and 1.5x10{sup 16} cm{sup -2}. Annealing treatments at temperatures up to 700 deg. C for 1 h were carried out to reduce implantation-induced structural defects. The structural and optical properties of the nanorods were studied by transmission electron microscopy (TEM) and cathodoluminescence (CL) spectroscopy. TEM shows that extended implantation defects vanish completely in nanorods implanted with doses up to 5x10{sup 13} cm{sup -2} after annealing at 700 deg. C. Dislocation loops remain after implantation with higher fluences. The CL intensity of as-grown nanorods and implanted ZnO nanorods is low. Annealing at 700 deg. C leads to a significant increase in the CL intensity for as-grown nanorods and implanted with a dose of up to 5x10{sup 13} cm{sup -2}. The strong CL intensity in implanted and annealed nanorods correlates with the complete disappearance of extended structural defects.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Charge redistribution in core-shell nanoparticles to promote oxygen reduction

Bimetallic core-shell nanoparticles are a class of near-surface alloy catalyst for which there is a high degree of control over size and composition. A challenge for theory is to understand the relationship between their structure and catalytic function and provide guidelines to design new catalysts that take advantage of material properties arising at the nanoscale. In this work, we use density functional theory to calculate the energetics of oxygen dissociative adsorption on 1 nm Pd-shell nanoparticles with a series of core metals. The barrier for this reaction and the binding energy of atomic oxygen is found to correlate well with the d-band level of the surface electrons. Noble metal cores lower the barrier and increase the binding, reducing the activity of the Pd-shell as compared to Pt. Reactive core metals such as Co and Mo, on the other hand, lower the d-band of the shell with respect to the Fermi level, giving the Pd-shelled particles oxygen reduction kinetics similar to that of Pt. While both ligand and strain effects determine the d-band center of the Pd shell, a greater surface relaxation reduces the strain in nanoparticles as compared to single-crystal near-surface alloys. Charge redistribution between core and shell then becomes an important factor for lowering the d-band center of Pd-shelled particles and increasing their activity for the oxygen reduction reaction.

36 MATERIALS SCIENCE↗

Crystal Structure Determination and Biological Activity of C{sub 20}H{sub 20}O{sub 6} and C{sub 19}H{sub 16}O{sub 6}Br{sub 2}

Crystal structures for methyl 2-(3-(3,4-dimethoxyphenyl)-1-1oxopropan-2-yl) benzoate (C{sub 20}H{sub 20}O{sub 6}) and methyl 4-bromo-3-(2-bromo-4,5-dimethoxyphenyl)-1-oxoisochroman-4-carboxylate (C{sub 19}H{sub 16}O{sub 6}Br{sub 2}) were prepared and characterized by single-crystal x-ray diffraction technique to establish their three-dimensional structures. Both were crystallized from acetone by a slow evaporation method. The results showed that the first crystal (C{sub 20}H{sub 20}O{sub 6}) is monoclinic with space group P2{sub 1}, lattice parameters a = 7.8839(4)A, b = 8.1087(4)A, c = 14.4840(10)A, {beta} = 97.447(2) deg., V = 918.13 (9)A{sup 3}, Z = 2, and D{sub x} = 1.289 g/m{sup 3}. The final discrepancy factor is R = 0.034 for 2,917 significant reflections. The second crystal (C{sub 19}H{sub 16}O{sub 6}Br{sub 2}) is monoclinic with space group P2{sub 1}/c, lattice parameters 20.1043 (7)A, b = 8.7046(2)A, c 11.0497(3)A, {beta} = 97.0923(11) deg., V = 1918.90 (10)A{sup 3}, Z = 4, and D{sub x} = 1.690 g/m{sup 3}. The final discrepancy factor is R = 0.064 for 9,619 significant reflections. Projection of structure, connectivity of the molecule in the unit cell, coordinates of each atom in the structure, biological activity, and discussion are presented in our paper.

36 MATERIALS SCIENCE↗

The 3C-6H polytypic transition in SiC as revealed by diffuse x-ray scattering

The 3C-6H polytypic transition in SiC single crystals is studied by means of diffuse x-ray scattering. Based on numerical simulations of the diffuse scattering intensity distribution we unambiguously prove that the 3C-6H transition in SiC occurs through the glide of partial dislocations and not by the ''layer displacement'' mechanism (i.e., local diffusional rearrangement of the Si and C atoms). The technique is extremely sensitive and can be used as a nondestructive mean to obtain statistically relevant values of the transition level down to {approx}0.05%.

36 MATERIALS SCIENCE↗

Characterization of diamond ultraviolet detectors fabricated with high-quality single-crystalline chemical vapor deposition films

We have fabricated high-performance ultraviolet (UV) detectors with high-quality undoped and B-doped homoepitaxial diamond layers which were sequentially grown on a high-pressure/high-temperature-synthesized (HPHT) type-Ib (100) substrate by means of a high-power microwave-plasma chemical vapor deposition method. The detector performance measured had large quantum efficiencies due to an effective built-in current amplification function, fast temporal responses, and high UV/visible sensing ratios although the HPHT substrate used had considerable amounts of various defects inducing visible light absorptions and slow detector responses. The usefulness of the bilayer detector structure employed is discussed.

36 MATERIALS SCIENCE↗

The metal-insulator transition in vanadium dioxide: A view at bulk and surface contributions for thin films and the effect of annealing

Vanadium dioxide is investigated as potential oxide barrier in spin switches, and in order to incorporate VO{sub 2} layers in complex multilayer devices, it is necessary to understand the relation between bulk and surface/interface properties. Highly oriented VO{sub 2} thin films were grown on (0001) sapphire single crystal substrates with reactive bias target ion beam deposition. In the analysis of the VO{sub 2} films, bulk-sensitive methods [x-ray diffraction (XRD) and transport measurements] and surface sensitive techniques [photoelectron spectroscopy (PES) and scanning tunneling microscopy and spectroscopy] were employed. The samples were subjected to heating cycles with annealing temperatures of up to 425 and 525 K. Prior to annealing the VO{sub 2} films exhibit the transition from the monoclinic to the tetragonal phase with the concurrent change in conductivity by more than a factor of 10{sup 3} and their phase purity is confirmed by XRD. Annealing to 425 K and thus cycling across the metal-insulator transition (MIT) temperature has no impact on the bulk properties of the VO{sub 2} film but the surface undergoes irreversible electronic changes. The observation of the valence band with PES during the annealing illustrates that the surface adopts a partially metallic character, which is retained after cooling. Annealing to a higher temperature (525 K) triggers a modification of the bulk, which is evidenced by a considerable reduction in the MIT characteristics, and a degradation in crystallite morphology. The local measurement of the conductivity with scanning tunneling spectroscopy shows the transition of the surface from predominantly semiconducting surface prior to annealing to a surface with an overwhelming contribution from metallic sections afterward. The spatial distribution of metallic regions cannot be linked in a unique manner to the crystallite size or location within the crystallites. The onset of oxygen depletion at the surface is held responsible for this behavior. The onset of bulk modification at higher temperatures is most likely linked to oxygen loss and effusion along the grain boundaries and concurrent onset of sintering. Our study focuses on the comparison of the MIT in the bulk and at the surface of thin VO{sub 2} layers and establishes an irreversible modification of the crystallite structure and surface for temperatures exceeding the MIT. The surface modification impacts on the strategies which will be employed to build the metallic contacts to VO{sub 2} layers.

36 MATERIALS SCIENCE↗

Amorphous clusters in Co implanted ZnO induced by boron pre-implantation

We demonstrate the formation of superparamagnetic/ferromagnetic regions within ZnO(0001) single crystals sequently implanted with B and Co. While the pre-implantation with B plays a minor role for the electrical transport properties, its presence leads to the formation of amorphous phases. Moreover, B acts strongly reducing on the implanted Co. Thus, the origin of the ferromagnetic ordering in local clusters with large Co concentration is itinerant d-electrons as in the case of metallic Co. The metallic amorphous phases are non-detectable by common X-ray diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗