Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material Point Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Mitigating oxygen loss to improve the cycling performance of high capacity cation-disordered cathode materials

Recent progress in the understanding of percolation theory points to cation-disordered lithium-excess transition metal oxides as high-capacity lithium-ion cathode materials. Nevertheless, the oxygen redox processes required for these materials to deliver high capacity can trigger oxygen loss, which leads to the formation of resistive surface layers on the cathode particles. Here, we demonstrate here that, somewhat surprisingly, fluorine can be incorporated into the bulk of disordered lithium nickel titanium molybdenum oxides using a standard solid-state method to increase the nickel content, and that this compositional modification is very effective in reducing oxygen loss, improving energy density, average voltage, and rate performance. We argue that the valence reduction on the anion site, offered by fluorine incorporation, opens up significant opportunities for the design of high-capacity cation-disordered cathode materials.

25 ENERGY STORAGE↗

High field magnetotransport and point contact Andreev reflection measurements on CuCr{sub 2}Se{sub 4} and CuCr{sub 2}Se{sub 3}Br—Degenerate magnetic semiconductor single crystals

Single crystals of the metallically degenerate fully magnetic semiconductors CuCr{sub 2}Se{sub 4} and CuCr{sub 2}Se{sub 3}Br have been prepared by the Chemical Vapour Transport method, using either Se or Br as transport agents. The high-quality, millimetre-sized, octahedrally faceted, needle- and platelet-shaped crystals are characterised by means of high field magnetotransport (μ{sub 0}H≤ 14 T) and Point Contact Andreev Reflection. The relatively high spin polarisation observed |P|>0.56, together with the relatively low minority carrier effective mass of 0.25 m{sub e}, and long scattering time 10{sup −13} s, could poise these materials for integration in low- and close-to-room temperature minority injection bipolar heterojunction transistor demonstrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Joint used for coupling long heaters

Systems for coupling ends of elongated heaters and methods of using such systems to treat a subsurface formation are described herein. A system may include two elongated heaters with an end portion of one heater abutted or near to an end portion of the other heater and a core coupling material. The core coupling material may extend between the two elongated heaters. The elongated heaters may include cores and at least one conductor substantially concentrically surrounds the cores. The cores may have a lower melting point than the conductors. At least one end portion of the conductor may have a beveled edge. The gap formed by the beveled edge may be filled with a coupling material for coupling the one or more conductors. One end portion of at least one core may have a recessed opening and the core coupling material may be partially inside the recessed opening.

47 OTHER INSTRUMENTATION↗

Method of fabricating free-form, high-aspect ratio components for high-current, high-speed microelectrics

Microelectronic structures and devices, and method of fabricating a three-dimensional microelectronic structure is provided, comprising passing a first precursor material for a selected three-dimensional microelectronic structure into a reaction chamber at temperatures sufficient to maintain said precursor material in a predominantly gaseous state; maintaining said reaction chamber under sufficient pressures to enhance formation of a first portion of said three-dimensional microelectronic structure; applying an electric field between an electrode and said microelectronic structure at a desired point under conditions whereat said first portion of a selected three-dimensional microelectronic structure is formed from said first precursor material; positionally adjusting either said formed three-dimensional microelectronic structure or said electrode whereby further controlled growth of said three-dimensional microelectronic structure occurs; passing a second precursor material for a selected three-dimensional microelectronic structure into a reaction chamber at temperatures sufficient to maintain said precursor material in a predominantly gaseous state; maintaining said reaction chamber under sufficient pressures whereby a second portion of said three-dimensional microelectronic structure formation is enhanced; applying an electric field between an electrode and said microelectronic structure at a desired point under conditions whereat said second portion of a selected three-dimensional microelectronic structure is formed from said second precursor material; and, positionally adjusting either said formed three-dimensional microelectronic structure or said electrode whereby further controlled growth of said three-dimensional microelectronic structure occurs.

42 ENGINEERING↗

A new measurement method of tritiated water with no radioactive waste- for monitoring post - 15050

A new measurement method has been developed by using a conventional liquid scintillation counter (LSC) with plastic scintillator pellets (PS-pellets) which is used as an alternative material of liquid scintillator. The measurement efficiency (%=cpm/dpm x 100) of PS-pellets with a conventional LSC is as high as using a liquid scintillator. Measurement efficiency of tritiated water was more than 50% by using PS-pellets for LSC without liquid scintillator. Qualitative and quantitative analysis were possible by using PS-pellets for LSC, because the PS-pellets method showed good linearity between the activity and count rate. Also, an end point of a spectrum showed a maximum energy of a radionuclide when one channel estimated 0.5 keV. The PS-pellets were reusable by dipping them in 5% soapsuds of hot water for more than overnight except for a case of measuring for a long elapsed time. So, no radioactive waste of liquid scintillator and PS-pellets is produced with this method.We designed a new field monitor and a monitoring post. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A computational framework for automation of point defect calculations

We have developed a complete and rigorously validated open-source Python framework to automate point defect calculations using density functional theory. Furthermore, the framework provides an effective and efficient method for defect structure generation, and creation of simple yet customizable workflows to analyze defect calculations. This package provides the capability to compute widely-accepted correction schemes to overcome finite-size effects, including (1) potential alignment, (2) image-charge correction, and (3) band filling correction to shallow defects. Using Si, ZnO and In2O3 as test examples, we demonstrate the package capabilities and validate the methodology.

97 MATHEMATICS AND COMPUTING↗

Temperature and concentration dependent magnetic properties of epitaxial Fe{sub 1−x}Cr{sub x}-alloy films in the high Cr-concentration regime

Soft magnetic materials with a Curie temperature (T{sub c}) close to room temperature are suitable candidates for device applications and for more fundamental aspects of magnetism. Promising candidates are Fe{sub 1−x}Cr{sub x}-alloys with a Fe concentration of about 25%–35%. We have grown by molecular beam epitaxy methods a number of epitaxial Fe{sub 1−x}Cr{sub x} alloys on MgO[100] and MgO[110] substrates, and we report on their structural and magnetic properties in this concentration range, including the dependence of the Curie temperature (T{sub c}) on the concentration, the magnetocrystalline anisotropy, and the development of the magnetic moment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure, spectroscopy, and thermal expansion of compounds in M{sup I}{sub 2}O-Al{sub 2}O{sub 3}-TiO{sub 2} system

Compounds that crystallize in four structure types in M{sub 2}O-Al{sub 2}O{sub 3}-TiO{sub 2} systems have been prepared by solid-phase reactions. LiAlTiO{sub 4}, K{sub 2}Al{sub 2}Ti{sub 6}O{sub 16}, Rb{sub 2}Al{sub 2}Ti{sub 6}O{sub 16} and Cs{sub 2}Al{sub 2}Ti{sub 6}O{sub 16} were synthesized for the first time. Their crystal structures were refined using the Rietveld method. Crystal-chemical systematics was performed for all compounds in M{sub 2}O-Al{sub 2}O{sub 3}-TiO{sub 2} system. Raman and IR investigation have been also made. Thermal expansion coefficients of compounds with the compositions M{sup I}AlTiO{sub 4} (M{sup I}-Li, Cs) and M{sup I}{sub 2}Al{sub 2}Ti{sub 6}O{sub 16} (M{sup I}-Na, K, Rb, Cs) were determined with the use of high-temperature X-ray diffraction analysis. - Graphical abstract: Crystal-chemical systematics of compounds with composition M{sup I}{sub 2}Fe{sub 2}Ti{sub 6}O{sub 16} and M{sup I}FeTiO{sub 4}. Highlights: Black-Right-Pointing-Pointer Compounds in M{sub 2}O-Al{sub 2}O{sub 3}-TiO{sub 2} systems have been prepared by solid-phase reactions. Black-Right-Pointing-Pointer Crystal structures of four compounds were refined using the Rietveld method. Black-Right-Pointing-Pointer Crystal-chemical systematics of compounds in M{sub 2}O-Al{sub 2}O{sub 3}-TiO{sub 2} system was performed. Black-Right-Pointing-Pointer Raman and IR investigation have been made. Black-Right-Pointing-Pointer Thermal expansion coefficients of all compounds were determined.

36 MATERIALS SCIENCE↗

Spectroelectrochemical properties of the single walled carbon nanotubes functionalized with polydiphenylamine doped with heteropolyanions

A combined chemical-electrochemical method was used for covalent functionalization of single-walled carbon nanotube (SWNT) with polydiphenylamine (PDPA) doped with heteropolyanions of H{sub 3}PMo{sub 12}O{sub 40}{center_dot}xH{sub 2}O. The functionalization process induces in Raman spectra of SWNTs the following changes: (i) an increase in relative intensity of the D band, accompanied a gradual up-shift of the G band in the case of the semiconducting tubes and a decrease in the relative intensity of band peaked at 1540 cm{sup -1} is remarked in the case of the metallic tubes; (ii) in the anti-Stokes Raman spectrum an increase in the relative intensity of Raman line of metallic tubes peaked at -1560 cm{sup -1} is remarked when the cycles number increases. The additional down-shift of the FTIR bands belonging to H{sub 3}PMo{sub 12}O{sub 40} heteropolyanions (at 881, 943 and 1055 cm{sup -1}) and PDPA (at 688, 736 and 1016 cm{sup -1}) originates in hindrance steric effects induced the covalent functionalization of SWNTs with polymer molecules. Using Raman scattering and FTIR spectroscopy we demonstrate that chemical polymerization of diphenylamine in the presence of H{sub 3}PMo{sub 12}O{sub 40}{center_dot}xH{sub 2}O and SWNTs results in a composite of the type blend based on PDPA in un-doped state and SWNTs doped with H{sub 3}PMo{sub 12}O{sub 40} heteropolyanions. - Graphical abstract: Stokes and anti-Stokes Raman spectra of the SWNTs before (a) and after electrochemical functionalization with PDPA doped with heteropolyanions by 5 (b) and 25 (c) voltammeter cycles. Highlights: Black-Right-Pointing-Pointer A chemical-electrochemical method is used to functionalization of SWNTs. Black-Right-Pointing-Pointer Functionalization of wall-side of tube is evidenced by anti-Stokes Raman studies. Black-Right-Pointing-Pointer FTIR spectra proves insertion of heteropolyanions in polydiphenylamine matrix. Black-Right-Pointing-Pointer FTIR spectra of polymer functionalized SWNTs reveal hindrance steric effects.

36 MATERIALS SCIENCE↗

Synthesis of metastable rare-earth-iron mixed oxide with the hexagonal crystal structure

Rare-earth-iron mixed oxides with the rare earth/iron ratio=1 have either orthorhombic (o-REFeO{sub 3}) or hexagonal (h-REFeO{sub 3}) structure. h-REFeO{sub 3} is a metastable phase and the synthesis of h-REFeO{sub 3} is usually difficult. In this work, the crystallization process of the precursors obtained by co-precipitation and Pechini methods was investigated in detail to synthesize h-REFeO{sub 3}. It was found that the crystallization from amorphous to hexagonal phase and the phase transition from hexagonal to orthorhombic phase occurred at a similar temperature range for rare earth elements with small ionic radii (Er-Lu, Y). For both co-precipitation and Pechini methods, single-phase h-REFeO{sub 3} was obtained by shortening the heating time during calcination process. The hexagonal-to-orthorhombic phase transition took place by a nucleation growth mechanism and vermicular morphology of the thus-formed orthorhombic phase was observed. The hexagonal YbFeO{sub 3} had higher catalytic activity for C{sub 3}H{sub 8} combustion than orthorhombic YbFeO{sub 3}. - Graphical abstract: Although the synthesis of metastable hexagonal REFeO{sub 3} by the conventional method is difficult, we found that this phase is obtained by shortening the heating time of the precursor prepared by co-precipitation method. Highlights: Black-Right-Pointing-Pointer Synthesis of metastable REFeO{sub 3} with hexagonal structure by the co-precipitation method. Black-Right-Pointing-Pointer Hexagonal REFeO{sub 3} is obtained for the rare earth elements with small ionic radii. Black-Right-Pointing-Pointer Hexagonal-to-orthorhombic transformation of REFeO{sub 3}. Black-Right-Pointing-Pointer Catalytic activity of hexagonal REFeO{sub 3} for C{sub 3}H{sub 8} combustion.

36 MATERIALS SCIENCE↗

Efficacy of Lower-Body Shielding in Computed Tomography Fluoroscopy-Guided Interventions

Purpose: Computed tomography (CT) fluoroscopy-guided interventions pose relevant radiation exposure to the interventionalist. The goal of this study was to analyze the efficacy of lower-body shielding as a simple structural method for decreasing radiation dose to the interventionalist without limiting access to the patient. Material and Methods: All examinations were performed with a 128-slice dual source CT scanner (12 Multiplication-Sign 1.2-mm collimation; 120 kV; and 20, 40, 60, and 80 mAs) and an Alderson-Rando phantom. Scatter radiation was measured with an ionization chamber and a digital dosimeter at standardized positions and heights with and without a lower-body lead shield (0.5-mm lead equivalent; Kenex, Harlow, UK). Dose decreases were computed for the different points of measurement. Results: On average, lower-body shielding decreased scatter radiation by 38.2% within a 150-cm radius around the shielding. This decrease is most significant close to the gantry opening and at low heights of 50 and 100 cm above the floor with a maximum decrease of scatter radiation of 95.9% close to the scanner's isocentre. With increasing distance to the gantry opening, the effect decreased. There is almost no dose decrease effect at {>=}150 above the floor. Scatter radiation and its decrease were linearly correlated with the tube current-time product (r{sup 2} = 0.99), whereas percent scatter radiation decrease was independent of the tube current-time product. Conclusion: Lower-body shielding is an effective way to decrease radiation exposure to the interventionalist and should routinely be used in CT fluoroscopy-guided interventions.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Magnetic Resonance Imaging-Based Target Volume Delineation in Radiation Therapy Treatment Planning for Brain Tumors Using Localized Region-Based Active Contour

Purpose: To evaluate the clinical application of a robust semiautomatic image segmentation method to determine the brain target volumes in radiation therapy treatment planning. Methods and Materials: A local robust region-based algorithm was used on MRI brain images to study the clinical target volume (CTV) of several patients. First, 3 oncologists delineated CTVs of 10 patients manually, and the process time for each patient was calculated. The averages of the oncologists’ contours were evaluated and considered as reference contours. Then, to determine the CTV through the semiautomatic method, a fourth oncologist who was blind to all manual contours selected 4-8 points around the edema and defined the initial contour. The time to obtain the final contour was calculated again for each patient. Manual and semiautomatic segmentation were compared using 3 different metric criteria: Dice coefficient, Hausdorff distance, and mean absolute distance. A comparison also was performed between volumes obtained from semiautomatic and manual methods. Results: Manual delineation processing time of tumors for each patient was dependent on its size and complexity and had a mean (±SD) of 12.33 ± 2.47 minutes, whereas it was 3.254 ± 1.7507 minutes for the semiautomatic method. Means of Dice coefficient, Hausdorff distance, and mean absolute distance between manual contours were 0.84 ± 0.02, 2.05 ± 0.66 cm, and 0.78 ± 0.15 cm, and they were 0.82 ± 0.03, 1.91 ± 0.65 cm, and 0.7 ± 0.22 cm between manual and semiautomatic contours, respectively. Moreover, the mean volume ratio (=semiautomatic/manual) calculated for all samples was 0.87. Conclusions: Given the deformability of this method, the results showed reasonable accuracy and similarity to the results of manual contouring by the oncologists. This study shows that the localized region-based algorithms can have great ability in determining the CTV and can be appropriate alternatives for manual approaches in brain cancer.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Enhanced backscatter and unsaturated blue wavelength shifts in F-doped fused silica optical fibers exposed to extreme neutron radiation damage

Amorphous fused silica (a-SiO 2 ) optical fibers, with and without inscribed Bragg gratings, were interrogated using infrared (~1550 nm) optical backscatter reflectometry during ~25 days of intense neutron irradiation to a fast (energy > 0.1 MeV) neutron fluence of ~10 21 n/cm 2 , or ~1.5 atomic displacements per atom. The reflected light amplitudes in Ge-doped core telecommunications fiber dropped below detection limits (>15 dB attenuation) within 3 days of irradiation (~10 20 fast n/cm 2 ). Here, amplitudes from a pure silica core, F-doped silica cladding fiber reached equilibrium levels ~1.5–2 dB higher than pre-irradiation values, whereas Bragg gratings inscribed in the same fiber using a femtosecond laser (point-by-point method) suffered > 45 dB attenuation. Blue wavelength shifts were initially consistent with previous radiation-induced compaction models but increased linearly with increasing neutron fluence (no evidence of saturation) beyond 10 20 n/cm 2 and exceeded 0.6%, which corresponds to >1,000 °C drift if used to measure temperature changes.

36 MATERIALS SCIENCE↗

Path integral Monte Carlo simulations of dense carbon-hydrogen plasmas

Carbon-hydrogen plasmas and hydrocarbon materials are of broad interest to laser shock experimentalists, high energy density physicists, and astrophysicists. Accurate equations of state (EOSs) of hydrocarbons are valuable for various studies from inertial confinement fusion to planetary science. By combining path integral Monte Carlo (PIMC) results at high temperatures and density functional theory molecular dynamics results at lower temperatures, we compute the EOSs for hydrocarbons from simulations performed at 1473 separate (ρ, T)-points distributed over a range of compositions. These methods accurately treat electronic excitation effects with neither adjustable parameter nor experimental input. PIMC is also an accurate simulation method that is capable of treating many-body interaction and nuclear quantum effects at finite temperatures. These methods therefore provide a benchmark-quality EOS that surpasses that of semi-empirical and Thomas-Fermi-based methods in the warm dense matter regime. By comparing our first-principles EOS to the LEOS 5112 model for CH, we validate the specific heat assumptions in this model but suggest that the Grüneisen parameter is too large at low temperatures. Based on our first-principles EOSs, we predict the principal Hugoniot curve of polystyrene to be 2%-5% softer at maximum shock compression than that predicted by orbital-free density functional theory and SESAME 7593. By investigating the atomic structure and chemical bonding of hydrocarbons, we show a drastic decrease in the lifetime of chemical bonds in the pressure interval from 0.4 to 4 megabar. We find the assumption of linear mixing to be valid for describing the EOS and the shock Hugoniot curve of hydrocarbons in the regime of partially ionized atomic liquids. We make predictions of the shock compression of glow-discharge polymers and investigate the effects of oxygen content and C:H ratio on its Hugoniot curve. In conclusion, our full suite of first-principles simulation results may be used to benchmark future theoretical investigations pertaining to hydrocarbon EOSs and should be helpful in guiding the design of future experiments on hydrocarbons in the gigabar regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fidelity and entanglement entropy for infinite-order phase transitions

Here, we study the fidelity and the entanglement entropy for the ground states of quantum systems that have infinite-order quantum phase transitions. In particular, we consider the quantum O(2) model with a spin-S truncation, where there is an infinite-order Gaussian (IOG) transition for S = 1 and there are Berezinskii-Kosterlitz-Thouless (BKT) transitions for S ≥ 2. We show that the height of the peak in the fidelity susceptibility (χ F ) converges to a finite thermodynamic value as a power law of 1 / L for the IOG transition and as 1 / ln (L) for BKT transitions. The peak position of χ F resides inside the gapped phase for both the IOG transition and BKT transitions. On the other hand, the derivative of the block entanglement entropy with respect to the coupling constant $S^{'}_{vN}$ has a peak height that diverges as ln 2 (L) for S = 1 and ln 3 (L) for S ≥ 2 and can be used to locate both kinds of transitions accurately. We include higher-order corrections for finite-size scalings and obtain the value of the central charge consistent with c = 1 predicted by conformal field theory. The crossing point of χ F between different system sizes is at the IOG point for S = 1 but is inside the gapped phase for S ≥ 2, while those of $S^{'}_{vN}$ are at the phase-transition points for all S truncations. Our work elaborates on how to use the finite-size scaling of χ F or $S^{'}_{vN}$ to detect infinite-order quantum phase transitions and discusses the efficiency and accuracy of the two methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Macro Supply Chain Lifecycle Decision Analytics

This report summarizes a two-year LDRD project that investigated the problem of representing complex supply chains, identifying the worst risks and evaluating mitigation options. Our team developed a framework that includes a representation for business processes, risk assessment questions, risk indicators and methods for analyzing and summarizing the data. In our approach, the Process Matrix represents an overall supply chain for an end product in a high-level, tabular form. It connects the various touch-points of a business process including people, external vendors, tools, storage locations and transportation services while capturing the flow of both physical and intellectual artifacts. We believe these direct connections are exactly the things that a process owner can typically control. These material flows (both physical and intellectual) are also represented in a graph. This enables us to use graph-oriented analysis such as fault tree analysis and attack graph generation. Our approach is top-down, which helps users to get a more holistic understanding for a given amount of resources. Understanding the provenance of materials is difficult and it is easy to exhaust the analysts' resources. Rather than a tool to do vendor analysis or product comparison, our framework enables an enterprise-level analysis. The risk assessment questionnaires have a varying levels of detail and cover various aspects of the supply chain such as process steps, artifacts, suppliers, etc. and connections between these aspects such as artifact-storage, artifact-supplier, etc. Each question is further associated with one of seven risk indicators which can be used to summarize the risk. These risk indicators can also be weighted to reflect a user's concerns. We have successfully applied our framework to several use cases in various stages of its development and provided valuable insights to our partners, but it can also be applied to other complex systems outside of the supply chain security problem.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Renormalized Singles Green’s Function for Quasi-Particle Calculations beyond the G 0 W 0 Approximation

Quasi-particle energies and band gaps in particular are critical for investigating novel materials. Commonly used density functional approximations (DFAs) systematically underestimate band gaps, and GW approximation is the established method of choice for good accuracy and reliability. However, G 0 W 0 has some undesired dependence on the DFA, while self-consistent GW (scGW) is expensive and not consistent in accuracy improvement. Here a simple and efficient G RS W 0 approach has been developed: a subspace diagonalization of the Hartree-Fock (HF) Hamiltonian with the DFA density matrix provides the new reference Green's function GRS that incorporates the effect of all single excitation contributions to the self-energy, thereby essentially eliminating the starting-point dependence. Calculations for molecules and large band gap solids demonstrate the significant improvement over G 0 W 0 and greatly reduced dependence on the initial DFA. GRS W0 approach also improve results for other bulks over G 0 W 0 but to a lesser extent, which could be due to the limitations in current implementation for bulks. The results demonstrate that to achieve good accuracy, it is not necessary to use hybrid DFA, which is expensive for bulks. Lastly, this work should be greatly significant in making GW a more robust approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the iron site localization in doped ZnO

Iron doped (5%) ZnO powders were prepared by hydrothermal and combustion methods. Subsequent heating treatments on these samples were performed under air and also under a reductive atmosphere. Powder XRD, Moessbauer spectroscopy and magnetization studies were used to characterize the products and investigate the localization of iron ions in the ZnO lattice. It was shown that a mixture with a ZnFe{sub 2}O{sub 4} type phase was obtained when the sample was prepared by the hydrothermal method, while Fe{sup 3+} occupy tetrahedral sites of the ZnO lattice in the case of the sample obtained by the combustion method. The magnetic measurements show that no ferromagnetism was detected in the iron doped ZnO compound, neither in the as prepared state nor after reduction. - Graphical abstract: Zn{sub 0.95}Fe{sub 0.05}O obtained by a combustion method and after reduction under hydrogen atmosphere. Highlights: Black-Right-Pointing-Pointer Iron doped ZnO was successfully synthesized by a combustion method. Black-Right-Pointing-Pointer The Fe{sup 3+} tetrahedral coordination was deduced from Moessbauer results. Black-Right-Pointing-Pointer The wurtzite structure was maintained after partial reduction of Fe{sup 3+} to Fe{sup 2+}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗