Search NASA⌕ Search

SEARCH · Search NASA

Results for “Matrix Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Less space for a new family of fermions

We investigate the experimentally allowed parameter space of an extension of the standard model (SM3) by one additional family of fermions. Therefore we extend our previous study of the Cabibbo-Kobayashi-Maskawa (CKM)-like mixing constraints of a fourth generation of quarks. In addition to the bounds from tree-level determinations of the 3x3 CKM elements and flavor-changing neutral currents processes (K, D, B{sub d}, B{sub s} mixing and the decay b{yields}s{gamma}) we also investigate the electroweak S, T, U parameters, the angle {gamma} of the unitarity triangle, and the rare decay B{sub s}{yields}{mu}{sup +}{mu}{sup -}. Moreover we improve our treatment of the QCD corrections compared to our previous analysis. We also take leptonic contributions into account, but we neglect the mixing among leptons. As a result we find that typically small mixing with the fourth family is favored, but still some sizeable deviations from the SM3 results are not yet excluded. The minimal possible value of V{sub tb} is 0.93. Also very large CP-violating effects in B{sub s} mixing seem to be impossible within an extension of the SM3 that consists of an additional fermion family alone. We find a delicate interplay of electroweak and flavor observables, which strongly suggests that a separate treatment of the two sectors is not feasible. In particular we show that the inclusion of the full CKM dependence of the S and T parameters in principle allows the existence of a degenerate fourth generation of quarks.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multiscale Progressive Failure Analysis of 3D Woven Composites

Application of three-dimensional (3D) woven composites is growing as an alternative to the use of ply-based composite materials. However, the design, analysis, modeling, and optimization of these materials is more challenging due to their complex and inherently multiscale geometries. Herein, a multiscale modeling procedure, based on efficient, semi-analytical micromechanical theories rather than the traditional finite element approach, is presented and applied to a 3D woven carbon–epoxy composite. A crack-band progressive damage model was employed for the matrix constituent to capture the globally observed nonlinear response. Realistic microstructural dimensions and tow-fiber volume fractions were determined from detailed X-ray computed tomography (CT) and scanning electron microscopy data. Pre-existing binder-tow disbonds and weft-tow waviness, observed in X-ray CT scans of the composite, were also included in the model. The results were compared with experimental data for the in-plane tensile and shear behavior of the composite. The tensile predictions exhibited good correlations with the test data. While the model was able to capture the less brittle nature of the in-plane shear response, quantitative measures were underpredicted to some degree.

3D woven composites↗

Scattering neutrinos, spin models, and permutations

We consider a class of Heisenberg all-to-all coupled spin models inspired by neutrino interactions in a supernova with N degrees of freedom. These models are characterized by a coupling matrix that is relatively simple in the sense that there are only a few, relative to N , nontrivial eigenvalues, in distinction to the classic Heisenberg spin-glass models, leading to distinct behavior in both the high-temperature and low-temperature regimes. When the momenta of the neutrinos are uniform and random in directions, we can calculate the large- N partition function for the quantum Heisenberg model. In particular, the high-temperature partition function predicts a non-Gaussian density of states, providing interesting counterexamples showing the limits of general theorems on the density of states for quantum spin models. We can repeat the same argument for classical Heisenberg models, also known as rotor models, and we find the high-temperature expansion is completely controlled by the eigenvalues of the coupling matrix, and again predicts non-Gaussian behavior for the density of states as long as the number of eigenvalues does not scale linearly with N . Indeed, we derive the amusing fact that these partition functions are essentially the generating function for counting permutations in the high-temperature regime. Finally, for the case relevant to neutrinos in a supernova, we identify the low-temperature phase as a unique state with the direction of the momenta of the neutrino dictating its coherent state in flavor-space, a state we dub the “flavor-momentum-locked” state. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multiscale Simulation of Thermo-Mechanical Processes in Irradiated Fission-Reactor Materials

This research characterized, by atomic level molecular dynamics (MD) simulations, the early stage aggregation of the fission product xenon in a model uranium oxide nuclear fuel matrix that contributes to the long term bubble formation mechanisms that compromise the efficiency and lifetime of nuclear fuels. These atomic level computer simulations disclosed a previously unknown pre-coarsening phenomenon in which the clustering of xenon is driven by vacancy diffusion. These key findings are to be included in higher level simulations of nuclear fuel thermo-mechanical processes that model irradiation effects within nuclear fuels. Previous multiscale models did not include these early time pre-coarsened clusters that occur in the nanosecond regime and therefore will lead to a better understanding of bubble formation in nuclear fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of transonic codes to aeroelastic modeling of airfoils including active controls

A study is performed using aeroelastic modeling to investigate the stability behavior of airfoils in small-disturbance transonic flow. Two conventional airfoils, NACA 64.A006 and NACA 64A010, and a supercritical airfoil, MBB A-3, are considered. Three sets of unsteady aerodynamic data are computed using three different transonic codes (LTRAN2-NLR, LTRAN2-HI, and USTS) for comparison purposes. Stability results obtained using a constant matrix, state-space, aeroelastic model are presented in a root-locus format. Use of the state-space model is demonstrated through application to flutter suppression using active controls. Aeroelastic effects due to simple, constant gain, partial feedback, control laws that utilize displacement, velocity, and acceleration sensing are studied using a variety of control gains. Calculations are also performed using linear subsonic aerodynamic theory to reveal the differences between including and not including transonic effects in the aeroelastic model. Aeroelastic stability behavior of these airfoils is physically interpreted and discussed in detail.

Batina, J. T.↗

Electroweak box diagrams on the lattice for pion and neutron decay

CKM matrix is unitary by construction in the standard model(SM). The recent analyses on the first row of CKM matrix show ≈3σ tension with unitarity. Nonperturbative calculations of the radiative corrections can reduce the theory uncertainty in CKM matrix elements. Here we compute the electroweak box contribution to the pion and kaon β decays using seven Nf = 2 + 1 + 1 HISQ-Clover lattice with various pion mass and lattice spacing. The continuum and chiral limit is taken using the leading dependence on M π and a, where M π extrapolation is taken to the physical pion mass and SU(3) symmetric mass for pion and kaon box contribution, respectively. Our results are $\square^{VA}_{γW}|_{π}$ = 2.820(28) × 10 –3 and $\square^{VA}_{γW}|_{K}$ = 2.384(17) × 10 –3 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probabilistic micromechanics for metal matrix composites

A probabilistic micromechanics-based nonlinear analysis procedure is developed to predict and quantify the variability in the properties of high temperature metal matrix composites. Monte Carlo simulation is used to model the probabilistic distributions of the constituent level properties including fiber, matrix, and interphase properties, volume and void ratios, strengths, fiber misalignment, and nonlinear empirical parameters. The procedure predicts the resultant ply properties and quantifies their statistical scatter. Graphite copper and Silicon Carbide Titanlum Aluminide (SCS-6 TI15) unidirectional plies are considered to demonstrate the predictive capabilities. The procedure is believed to have a high potential for use in material characterization and selection to precede and assist in experimental studies of new high temperature metal matrix composites.

Engelstad, S. P.↗

Revisiting stochastic variability of AGNs with structure functions

Discrepancies between reported structure function (SF) slopes and their overall flatness as compared to the expectations from the damped random walk (DRW) model, which generally well describes the variability of active galactic nuclei (AGNs), have triggered us to study this problem in detail. We review common AGN variability observables and identify their most common problems. Equipped with this knowledge, we study ∼9000 r-band AGN light curves from Stripe 82 of the Sloan Digital Sky Survey, using SFs described by stochastic processes with the power exponential covariance matrix of the signal. We model the “subensemble” SFs in the redshift–absolute magnitude bins with the full SF equation (including the turnover and the noise part) and a single power law (SPL; in the “red noise regime” after subtracting the noise term). The distribution of full-equation SF (SPL) slopes peaks at γ=0.55±0.08 (0.52 ± 0.06) and is consistent with the DRW model. There is a hint of a weak correlation of γ with the luminosity and a lack of correlation with the black hole mass. The typical decorrelation timescale in the optical is τ=0.97±0.46 year. The SF amplitude at one year obtained from the SPL fitting is SF{sub 0}=0.22±0.06 mag and is overestimated because the SF is already at the turnover part, so the true value is SF{sub 0}=0.20±0.06 mag. The asymptotic variability is SF{sub ∞}=0.25±0.06 mag. It is strongly anticorrelated with both the luminosity and the Eddington ratio and is correlated with the black hole mass. The reliability of these results is fortified with Monte Carlo simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Statistical Hauser-Feshbach theory with width-fluctuation correction including direct reaction channels for neutron-induced reactions at low energies

Here, a model to calculate particle-induced reaction cross sections with statistical Hauser-Feshbach theory including direct reactions is given. The energy average of the scattering matrix from the coupled-channels optical model is diagonalized by the transformation proposed by Engelbrecht and Weidenmüller [C. A. Engelbrecht and H. A. Weidenmüller, Phys. Rev. C 8, 859 (1973)]. The ensemble average of S -matrix elements in the diagonalized channel space is approximated by a model of Moldauer [P. A. Moldauer, Phys. Rev. C 12, 744 (1975)] using the newly parametrized channel degree-of-freedom ν a to better describe the Gaussian orthogonal ensemble (GOE) reference calculations. The Moldauer approximation is confirmed by a Monte Carlo study using a randomly generated S matrix, as well as the GOE threefold integration formula. Lastly, the method proposed is applied to the 238U(n,n') cross-section calculation in the fast-energy range, showing an enhancement in the inelastic scattering cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The {sup 12}C({alpha}, {gamma}){sup 16}O E2 cross section at stellar energies

The E2 component of the {sup 12}C({alpha}, {gamma}){sup 16}O cross section is investigated by a microscopic cluster model, and by R-matrix fits. The first approach provides S{sub E2}(300 keV){approx_equal}50 keV-b for ground-state transitions. In the R-matrix theory, we show that the background term plays a crucial role, and cannot be determined without ambiguity. Only an upper limit on the extrapolated S factor can be obtained [S{sub E2}(300 keV)<190 keV-b]. To constrain the R-matrix analysis, we use the GCM Asymptotic Normalization Constant (ANC) of the 2{sub 1}{sup +} level. This procedure strongly reduces the uncertainties on the R-matrix fit, and we end up with a recommended value of S{sub E2}(300 keV) =42{+-}2 keV-b. As ANC values derived from indirect methods are not consistent with the {sup 12}C({alpha}, {gamma}){sup 16}O cascade transitions to the 2{sub 1}{sup +} state, we suggest a remeasurement of this cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Use of Mesoscopic Host Matrix to Induce Ferrimagnetism in Antiferromagnetic Spinel Oxide [Use of Mesoscopic Host Matrix for Ferrimagnetism in Antiferromagnetic Spinel Oxide]

Despite the advances in the methods for fabricating nanoscale materials, critical issues remain, such as the difficulties encountered in anchoring, and the deterioration in their stability after integration with other components. These issues need to be addressed to further increase the scope of their applicability. In this study, using epitaxial mesoscopic host matrices, materials are spatially confined at the nanoscale, and are supported, anchored, and stabilized. They also exhibit properties distinct from the bulk counterparts proving their high quality nanoscale nature. ZnFe 2 O 4 and SrTiO 3 are used as the model confined material and host matrix, respectively. The ZnFe 2 O 4 phases are spatially confined by the SrTiO 3 mesoscopic matrix and have strongly enhanced ferrimagnetic properties as compared to bulk and plain thin films of ZnFe 2 O 4 , with a Curie temperature of ≈500 K. The results of a series of control experiments and characterization measurements indicate that cationic inversion, which originates from the high interface–to–volume ratio of the ZnFe 2 O 4 phase in the ZnFe 2 O 4 –SrTiO 3 nanocomposite film, is responsible for the magnetization enhancement. An exchange bias is observed, owing to the coexistence of ferrimagnetic and antiferromagnetic regions in the confined ZnFe 2 O 4 phase. In conclusion, the magnetic properties are dependent on the ZnFe 2 O 4 crystallite size, which can be controlled by the growth conditions.

36 MATERIALS SCIENCE↗

Dependence of Heat Removal Rate of Pebble-Based Rods on Inter-Pebble Matrix Fill Fraction

Carbon pebble rods are a promising candidate for use in high heat flux regions of magnetic fusion energy reactor walls. Under high (10 – 50 MW/m 2 ) heat loads, carbon pebble rods release hot pebbles from the exposed surface, carrying away heat as the pebble rod surface recedes. In this work, we show that the surface recession rate during heating can be adjusted by changing the mechanical strength of the extruded rods, modifying the heat removal rate; this is accomplished here by varying the fill fraction of the inter-pebble matrix. A three-dimensional finite element model is presented that captures many experimental observations, including the sphere temperature and the surface recession rate. The model predicts that pebble release is caused by thermally driven crack propagation through the matrix and that the matrix strength against breaking is the single most important material parameter setting the pebble release rate; this prediction is supported by experimental results.

36 MATERIALS SCIENCE↗

Dynamical Sketching for Enhanced Communication Efficiency in Federated Learning

Federated learning (FL) has revolutionized distributed machine learning by enabling collaborative model training without sharing local data. However, communication efficiency and privacy guarantees remain significant challenges. This paper introduces a dynamic sketching mechanism in FL, optimizing the trade-off between communication efficiency and model accuracy. By dynamically selecting the sketch matrix size, our approach adapts to the evolving characteristics of the data and the model, ensuring optimal performance across diverse scenarios. We leverage Bayesian optimization to systematically tune the sketch parameters, achieving an effective balance between resource efficiency and model performance. Experimental results on the MNIST dataset using a convolutional neural network (CNN) architecture validate the proposed method's efficiency and scalability. Our dynamic sketching approach significantly outperforms fixed-size sketching techniques, achieving higher compression ratios (up to 62x) and providing better privacy guarantees while maintaining high model accuracy. These findings highlight the robustness and versatility of our approach and make it a valuable solution for privacy-preserving, communication-efficient federated learning.

Afrose, Sharmin [ORNL]↗

Novel Entries in a Fungal Biofilm Matrix Encyclopedia

Virulence of Candida is linked with its ability to form biofilms. Once established, biofilm infections are nearly impossible to eradicate. Biofilm cells live immersed in a self-produced matrix, a blend of extracellular biopolymers, many of which are uncharacterized. In this study, we provide a comprehensive analysis of the matrix manufactured by Candida albicans both in vitro and in a clinical niche animal model. We further explore the function of matrix components, including the impact on drug resistance. We uncovered components from each of the macromolecular classes (55% protein, 25% carbohydrate, 15% lipid, and 5% nucleic acid) in the C. albicans biofilm matrix. Three individual polysaccharides were identified and were suggested to interact physically. Surprisingly, a previously identified polysaccharide of functional importance, β-1,3-glucan, comprised only a small portion of the total matrix carbohydrate. Newly described, more abundant polysaccharides included β-1,2 branched β-1,6-mannans (87%) associated with unbranched β-1,6-glucans (13%) in an apparent mannan-glucan complex (MGCx). Functional matrix proteomic analysis revealed 458 distinct activities. The matrix lipids consisted of neutral glycerolipids (89.1%), polar glycerolipids (10.4%), and sphingolipids (0.5%). Examination of matrix nucleic acid identified DNA, primarily noncoding sequences. Several of the in vitro matrix components, including proteins and each of the polysaccharides, were also present in the matrix of a clinically relevant in vivo biofilm. Nuclear magnetic resonance (NMR) analysis demonstrated interaction of aggregate matrix with the antifungal fluconazole, consistent with a role in drug impedance and contribution of multiple matrix components.

59 BASIC BIOLOGICAL SCIENCES↗

A seal test facility for the measurement of isotropic and anisotropic linear rotordynamic characteristics

A new seal test facility for measuring high-pressure seal rotor-dynamic characteristics has recently been made operational at Case Western Reserve University (CWRU). This work is being sponsored by the Electric Power Research Institute (EPRI). The fundamental concept embodied in this test apparatus is a double-spool-shaft spindle which permits independent control over the spin speed and the frequency of an adjustable circular vibration orbit for both forward and backward whirl. Also, the static eccentricity between the rotating and non-rotating test seal parts is easily adjustable to desired values. By accurately measuring both dynamic radial displacement and dynamic radial force signals, over a wide range of circular orbit frequency, one is able to solve for the full linear-anisotropic model's 12 coefficients rather than the 6 coefficients of the more restrictive isotropic linear model. Of course, one may also impose the isotropic assumption in reducing test data, thereby providing a valid qualification of which seal configurations are well represented by the isotropic model and which are not. In fact, as argued in reference (1), the requirement for maintaining a symmetric total system mass matrix means that the resulting isotropic model needs 5 coefficients and the anisotropic model needs 11 coefficients.

Adams, M. L.↗

Modeling, simulation, and analysis of optical remote sensing systems

Remote Sensing of the Earth's resources from space-based sensors has evolved in the past 20 years from a scientific experiment to a commonly used technological tool. The scientific applications and engineering aspects of remote sensing systems have been studied extensively. However, most of these studies have been aimed at understanding individual aspects of the remote sensing process while relatively few have studied their interrelations. A motivation for studying these interrelationships has arisen with the advent of highly sophisticated configurable sensors as part of the Earth Observing System (EOS) proposed by NASA for the 1990's. Two approaches to investigating remote sensing systems are developed. In one approach, detailed models of the scene, the sensor, and the processing aspects of the system are implemented in a discrete simulation. This approach is useful in creating simulated images with desired characteristics for use in sensor or processing algorithm development. A less complete, but computationally simpler method based on a parametric model of the system is also developed. In this analytical model the various informational classes are parameterized by their spectral mean vector and covariance matrix. These class statistics are modified by models for the atmosphere, the sensor, and processing algorithms and an estimate made of the resulting classification accuracy among the informational classes. Application of these models is made to the study of the proposed High Resolution Imaging Spectrometer (HRIS). The interrelationships among observational conditions, sensor effects, and processing choices are investigated with several interesting results.

Kerekes, John Paul↗

Three Dimensional CFD Analysis of the GTX Combustor

The annular combustor geometry of a combined-cycle engine has been analyzed with three-dimensional computational fluid dynamics. Both subsonic combustion and supersonic combustion flowfields have been simulated. The subsonic combustion analysis was executed in conjunction with a direct-connect test rig. Two cold-flow and one hot-flow results are presented. The simulations compare favorably with the test data for the two cold flow calculations; the hot-flow data was not yet available. The hot-flow simulation indicates that the conventional ejector-ramjet cycle would not provide adequate mixing at the conditions tested. The supersonic combustion ramjet flowfield was simulated with frozen chemistry model. A five-parameter test matrix was specified, according to statistical design-of-experiments theory. Twenty-seven separate simulations were used to assemble surrogate models for combustor mixing efficiency and total pressure recovery. ScramJet injector design parameters (injector angle, location, and fuel split) as well as mission variables (total fuel massflow and freestream Mach number) were included in the analysis. A promising injector design has been identified that provides good mixing characteristics with low total pressure losses. The surrogate models can be used to develop performance maps of different injector designs. Several complex three-way variable interactions appear within the dataset that are not adequately resolved with the current statistical analysis.

Steffen, C. J., Jr.↗

Three Dimensional CFD Analysis of the GTX Combustor

The annular combustor geometry of a combined-cycle engine has been analyzed with three-dimensional computational fluid dynamics. Both subsonic combustion and supersonic combustion flowfields have been simulated. The subsonic combustion analysis was executed in conjunction with a direct-connect test rig. Two cold-flow and one hot-flow results are presented. The simulations compare favorably with the test data for the two cold flow calculations; the hot-flow data was not yet available. The hot-flow simulation Indicates that the conventional ejector-ramjet cycle would not provide adequate mixing at the conditions tested. The supersonic combustion ramjet flowfield was simulated with frozen chemistry model. A five-parameter test matrix was specified, according to statistical design-of-experiments theory. Twenty-seven separate simulations were used to assemble surrogate models for combustor mixing efficiency and total pressure recovery. Scramjet injector design parameters (injector angle, location, and fuel split) as well as mission variables (total fuel mass flow and freestream Mach number) were included in the analysis. A promising injector design has been identified that provides good mixing characteristics with low total pressure losses. The surrogate models can be used to develop performance maps of different injector designs. Several complex three-way variable interactions appear within the dataset that are not adequately resolved with the current statistical analysis.

Steffen, C. J., Jr.↗