Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nested”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Residual Stresses and Other Properties of Teardrops

The Department of Energy’s 3013 Standard for packaging plutonium-bearing materials for storage up to fifty years specifies a minimum of two individually welded, nested containers herein referred to as the 3013 outer and the 3013 inner.1 Stress corrosion cracking (SCC) is a potential failure mechanism for 3013 inner containers.2,3 The bagless transfer container (BTC), a 3013 inner container used by Hanford and Savanna River Site (SRS) made from 304L stainless steel (SS), poses the greatest concern for SCC.4,5 The Surveillance and Monitoring Program (SMP) use stressed metal samples known as teardrops as screening tools in SCC studies to evaluate factors that could result in cracks in the 3013 containers.6,7 This report provides background information on the teardrops used in the Los Alamos National Laboratory (LANL) SMP studies including method of construction, composition and variability. In addition, the report discusses measurements of residual stresses in teardrops and compares the results with residual stresses in BTCs reported previously.4 Factors affecting residual stresses, including teardrop dimensions and surface finish, are also discussed.

36 MATERIALS SCIENCE↗

Extreme-Scale Algorithms & Software Resilience (EASIR) Architecture-Aware Algorithms for Scalable Performance and Resilience on Heterogeneous Architectures

This project addresses both communication-avoiding algorithms, and reproducible floating-point computation. Communication, i.e. moving data, either between levels of memory or processors over a network, is much more expensive per operation than arithmetic (measured in time or energy), so we seek algorithms that greatly reduce communication. We developed many new algorithms for both dense and sparse, and both direct and iterative linear algebra, attaining new communication lower bounds, and getting large speedups in many cases. We also extended this work in several ways: (1) We minimize writes separately from reads, since writes may be much more expensive than reads on emerging memory technologies, like Flash, sometimes doing asymptotically fewer writes than reads. (2) We extend the lower bounds and optimal algorithms to arbitrary algorithms that may be expressed as perfectly nested loops accessing arrays, where the array subscripts may be arbitrary affine functions of the loop indices (eg A(i), B(i,j+k, k+3*m-7, …) etc.). (3) We extend our communication-avoiding approach to some machine learning algorithms, such as support vector machines. This work has won a number of awards. We also address reproducible floating-point computation. We define reproducibility to mean getting bitwise identical results from multiple runs of the same program, perhaps with different hardware resources or other changes that should ideally not change the answer. Many users depend on reproducibility for debugging or correctness. However, dynamic scheduling of parallel computing resources, combined with nonassociativity of floating point addition, makes attaining reproducibility a challenge even for simple operations like summing a vector of numbers, or more complicated operations like the Basic Linear Algebra Subprograms (BLAS). We describe an algorithm that computes a reproducible sum of floating point numbers, independent of the order of summation. The algorithm depends only on a subset of the IEEE Floating Point Standard 754-2008, uses just 6 words to represent a “reproducible accumulator,” and requires just one read-only pass over the data, or one reduction in parallel. New instructions based on this work are being considered for inclusion in the future IEEE 754-2018 floating-point standard, and new reproducible BLAS are being considered for the next version of the BLAS standard.

97 MATHEMATICS AND COMPUTING↗

DOE's 449 MHz Wind Profiling Radars on the U.S. West Coast: Annual Report for Fiscal Year 2016

The three coastal wind profilers and associated meteorological instruments located in Forks, WA, Astoria, OR, and North Bend, OR, provide important observations at high temporal and vertical spatial resolution to characterize the meteorological inflow to the western region of the United States. These instruments have been operating for a year or more, and furnish boundary conditions for the modeling efforts of the WFIP2 project. The data have been delivered to archives at both NOAA and the DOE A2e DAP at a data recovery rate in excess of 98%. Site maintenance activities have been relatively minor, with a few component replacements and repairs to RASS foam. Bird mortality surveys have found no bird nests or carcasses, and the U.S. Fish and Wildlife Service has regularly been provided survey reports. This project represents a successful collaboration between PNNL and NOAA to procure, test, deploy, maintain, and operate three 449 MHz radar wind profilers.

54 ENVIRONMENTAL SCIENCES↗

NCSP IER 422 CED-3b Documentation

A Subcritical Copper-Reflected α-phase Plutonium (SCRαP) integral benchmark experiment has been designed and measured. In this experiment, multiplication is approximated using correlated neutron data from a detector system consisting of 3He tubes inside high density polyethylene (HDPE). Measurements were performed on various subcritical experimental configurations consisting of a weapons-grade plutonium sphere surrounded by different Cu thicknesses. In addition to the proposed base experimental configurations with Cu, additional configurations were performed with the plutonium ball nested in various thicknesses of interleaved HDPE spherical shells mixed in with the Cu shells. The HDPE is intended to provide fast neutron moderation and reflection, resulting in additional measurements with differing multiplication, spectra, and nuclear data sensitivity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TMCI with Resonator Wakes

Transverse mode-coupling instability (TMCI) with a high-frequency resonator wake is examined by the Nested Head-Tail Vlasov solver (NHT), where a Gaussian bunch in a parabolic potential (GP model) is represented by concentric rings in the longitudinal phase space. It is shown that multiple mode couplings and decouplings make impossible an unambiguous definition of the threshold, unless Landau damping is taken into account. To address this problem, instead of a single instability threshold, an interval of thresholds is suggested, bounded by the low and high intensity ones. For the broadband impedance model, the high intensity threshold is shown to follow Zotter's scaling, but smaller by about a factor of two. The same scaling, this time smaller than Zotter's by a factor of four, is found for the ABS model (Air Bag Square well).

43 PARTICLE ACCELERATORS↗

A User’s Guide to the PLTEMP/ANL Code

PLTEMP/ANL V4.3 is a program that obtains a steady-state flow and temperature solution for a nuclear reactor core, or for a single fuel assembly. It is based on an evolutionary sequence of codes originally used for plate temperatures, hence “PLTEMP”, developed at Argonne National Laboratory over several decades. Fueled and non-fueled regions are modeled. Each fuel assembly consists of one or more plates or tubes separated by coolant channels. The fuel plates may have one to five layers of different materials, each with heat generation. The width of a fuel plate may be divided into multiple longitudinal stripes, each with its own axial power shape. Depending upon the heat transfer method selected, the temperature solution is effectively 2-dimensional or 3-dimensional (Appendix XV). It begins with a solution across all coolant channels and fuel plates or tubes within a given fuel assembly, at the entrance to the assembly. The temperature solution is repeated for each axial node along the length of the fuel assembly. The geometry may be either slab or radial, corresponding to fuel assemblies made of a series of flat (or slightly curved) plates, or of nested tubes. A variety of thermal-hydraulic correlations are available to determine safety margins such as onset-of-nucleate boiling ratio(ONBR), departure from nucleate boiling ratio (DNBR), and onset of flow instability ratio (OFIR). Coolant properties for either light or heavy water are obtained from FORTRAN functions rather than from tables. The code is intended for thermal-hydraulic analysis of research reactor performance in the sub-cooled boiling regime. Both turbulent and laminar flow regimes can be modeled. Options to calculate both forced flow and natural circulation are available. A general search capability is available (Appendix XII) to greatly reduce the reactor analyst’s time.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Implicit, manifold-preserving numerical representations and solvers for multiscale kinetic simulations of plasmas

Presentation Conclusions: We have derived manifold-preserving algorithms for kinetic plasma simulation; Collisionless (PIC): we have solved the 40-year-old algorithmic challenge of developing accurate implicit PIC algorithms; Collisional (VFP): we have demonstrated a truly multiscale algorithm that has enabled routine simulation of ICF spherical capsule implosions with a few hundred cores for a couple of days.; In both cases: Strict conservation properties have been shown to be critical for long-term accuracy.; Significant algorithmic acceleration has been achieved by using nested asymptotic models.; We have seen similar benefits in other applications

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Problem Description

Gobstopper.inp is a test problem that is designed to be a nice middle-of-the-road problem that balances work done in tracking and collisions. It is domain decomposed to stress particle communication between domains while in the tracking phase. This is an eigenvalue problem that is forced to run for 25 cycles with 10,000 particles per cycle. The final eigenvalue (keff) should be around 0.998 with some uncertainty reported. The cross sections are stored in a 230 energy multigroup fashion, but the collisions use continuous energy physics. The geometry is 1,000 nested spheres made of random materials from the list of materials found in a reactor. The shells are uniformly spaced up to 10 centimeters. However, 80% of the shells are made of highly enriched uranium found in the Godiva criticality experiment. This was to push the criticality eigenvalue (keff) closer to 1.0. The material compositions may be found in the material section. The densities are all the same for each material and can be found in the cell description. The geometry is further decomposed into 64 (4 X 4 X 4) cube domains. The problem is initially sourced in the first cycle with particles uniformly over a 10 cm sphere. Their energy spectrum is represented by the outgoing fission spectrum from U-235 nucleus hit by a 1.5 MeV neutron. The tallies are mostly turned off except for the balance, eigenvalue and spectrum tallies. The spectrum and eigenvalue tallies are written out to the .plt file. The balance and eigenvalue tallies are written to the .out file.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A GENERIC MICROGRID CONTROLLER

The main objective of this project was to develop and test a Generic Microgrid Controller (GMC) that provides (1) seamless islanding and reconnection of the microgrid, (2) efficient, reliable, and resilient operation of the microgrid with the required power quality, whether islanded or grid-connected, (3) existing and future ancillary services to the larger grid, (4) the capability for the microgrid to serve the resiliency needs of participating communities, (5) communication with the electric grid utility as a single controllable entity, and (6) increased reliability, efficiency and reduced emissions. The GMC developed under this project was designed to facilitate the deployment of microgrids, to be easily adapted to various microgrid configurations, and reduce up-front engineering costs associated with the design and development of microgrid controllers. Specifically, the GMC: 1. Provides a control structure amenable to accommodating an array of microgrid configurations and a portfolio of functional requirements; 2. Possesses a high level architecture that can readily be adopted by commercial suppliers; 3. Supports unlimited nesting of conforming microgrid control schemes; 4. Integrates into a full-featured Energy Management System (EMS) as a module. A select set of microgrids, operating a variety of microgrid configurations, served as “collaborating microgrid partners” in the project and assured thereby that the GMC developed under this program can readily be applied to microgrids of different sizes, and equipped with various resources, attributes, and equipment. Collaborating microgrid partners included the UCI Medical Center), the Port of Los Angeles, Port of Long Beach, and the Irvine Ranch Water District. The objectives of the project were achieved in two phases: (Phase I) Research, Development and Design (“Design”), and (Phase II) Testing, Evaluation, and Verification (“TEV”). In Phase I, specifications were developed for the GMC and a detailed test plan was established to test the functional requirements of the GMC. The GMC addresses two core functions, transition and dispatch, as well as several optional higher level functions such as economic dispatch, and renewable and load forecasting.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Noise Study for the Mexican Spotted Owl Sandia-Mortandad Area of Environmental Interest

One of the primary threats to Mexican Spotted Owls at the Los Alamos National Laboratory (LANL) is noise disturbance during the nesting season from vehicular traffic, construction activities, and explosives testing. The other primary threat is from habitat loss or alteration. Sigma Mesa is located between Sandia Canyon to the north and Mortandad Canyon to the south, and is within Technical Area 60. Since Sigma Mesa is within an Area of Environmental Interest (AEI) for the Mexican Spotted Owl, any increase in operational activities requires evaluation under the LANL Habitat Management Plan. This study was completed to support a biological assessment to analyze the effects of the installation of a new asphalt batch plant and additional vehicular traffic on Sigma Mesa. We conducted noise monitoring using calibrated noise level meters at various locations around the project site. This included daytime, nighttime, and weekend measurements. The noise cycle levels around Sigma Mesa vary throughout the week and by measurement location. In developed areas, current noise levels were significantly higher during the day due to daytime operations. In undeveloped areas, noise levels were significantly higher at night due to natural noise primarily from insects. Weekend noise was significantly lower in developed areas and was not significantly different in undeveloped areas. Weekday operations are reduced during the weekend resulting in less noise. Since most of the operational noise is attenuated during the week, noise levels in undeveloped areas are not significantly different during the weekend. In comparison to a noise study performed in 2005 in the same general area, current noise levels have increased in developed areas around Sigma Mesa, but have not increased in undeveloped areas that are lower in elevation. This is due to natural noise attenuation over distance and elevation gradients.

54 ENVIRONMENTAL SCIENCES↗

Noise Study for the Mexican Spotted Owl Sandia-Mortandad Area of Environmental Interest

One of the primary threats to Mexican Spotted Owls at the Los Alamos National Laboratory (LANL) is noise disturbance during the nesting season from vehicular traffic, construction activities, and explosives testing. The other primary threat is from habitat loss or alteration. Sigma Mesa is located between Sandia Canyon to the north and Mortandad Canyon to the south, and is within Technical Area 60. Since Sigma Mesa is within an Area of Environmental Interest (AEI) for the Mexican Spotted Owl, any increase in operational activities requires evaluation under the LANL Habitat Management Plan. This study was completed to support a biological assessment to analyze the effects of the installation of a new asphalt batch plant and additional vehicular traffic on Sigma Mesa. We conducted noise monitoring using calibrated noise level meters at various locations around the project site. This included daytime, nighttime, and weekend measurements. The noise cycle levels around Sigma Mesa vary throughout the week and by measurement location. In developed areas, current noise levels were significantly higher during the day due to daytime operations. In undeveloped areas, noise levels were significantly higher at night due to natural noise primarily from insects. Weekend noise was significantly lower in developed areas and was not significantly different in undeveloped areas. Weekday operations are reduced during the weekend resulting in less noise. Since most of the operational noise is attenuated during the week, noise levels in undeveloped areas are not significantly different during the weekend. In comparison to a noise study performed in 2005 in the same general area, current noise levels have increased in developed areas around Sigma Mesa, but have not increased in undeveloped areas that are lower in elevation. This is due to natural noise attenuation over distance and elevation gradients.

54 ENVIRONMENTAL SCIENCES↗

Sandia Data Archive (SDA) Specifications (Version 1.1)

The Sandia Data Archive (SDA) format is special implementation the HDF5 (Hierarchal Data Format, version 5) standard. Archive files store data in records identified with a unique text label. Primitive records store numeric, logical, and character arrays of arbitrary size and dimensionality. Compound records store composite MAT- LAB variables--cell arrays, structures, and objects--with arbitrary nesting. External records allow text/binary files to be stored alongside archived data or division of a large file into smaller archives for transmission. This report documents version 1.1 of the SDA standard, which adds support for structure and object arrays. The basic principles of SDA remain unchanged from version 1.0, with minor enhancements and bug fixes. The Sandia Mat lab AnalysiS Hierarchy (SMASH) toolbox uses SDA extensively; support utilities from the toolbox are highlighted here. Although the SDA format is designed around MATLAB, its use of HDF5 allows adoption in other computer languages.

97 MATHEMATICS AND COMPUTING↗

Evaluating the performance of the immersed boundary method within the grey zone for improved weather forecasts in the HRRR model

Improved performance of the High Resolution Rapid Refresh (HRRR) weather forecast in regions of complex terrain is a primary goal of the second Wind Forecasting Improvement Project (WFIP2). The HRRR forecast uses the Weather Research and Forecasting (WRF) model at a horizontal resolution of 3 km and includes an experimental nest over the WFIP2 study area with 750 m horizontal resolution. At these resolutions the complex terrain of the WFIP2 study area, the Columbia River Gorge, is well resolved and can include steep terrain slopes. The terrain-following coordinate system used by the WRF model is susceptible to numerical instabilities as model resolution and resolved terrain slopes increase. The immersed boundary method (IBM) has been shown to reduce these instabilities at very high resolutions (roughly 10 m or less), and thus use of IBM is desirable for high resolution simulations over the WFIP2 study area. However, accuracy of the IBM appears to degrade with coarser grid resolution and the sensitivities of IBMs to grid resolution are not well understood. In this report, we work to understand the accuracy and performance of the IBM at coarser resolutions with the goal of developing an IBM for use in the grey zone, or the intermediate scales between mesoscale and large-eddy simulation. Here, several existing immersed boundary algorithms from the literature are implemented into WRF, along with a new implementation developed during this project. The IBM algorithms for the atmospheric boundary layer are evaluated within the WRF model for a range of grid resolutions. While the strong performance of IBMs at high-resolution is confirmed, important model sensitivities are also revealed. Particular focus is placed on IBM performance at intermediate grid resolutions, which to this point has not been studied in the atmospheric modeling literature.

54 ENVIRONMENTAL SCIENCES↗

Installation and Commissioning of the Netzsch Skimmer

The DOE molten salt reactor (MSR) program has been focusing on the thermochemistry and transport properties of fuel, diluent/carrier, coolant, flush, and reprocessing salts proposed for various molten salt reactor technologies. Data from the chemistry project inform models of salt behavior used in dynamic models of nuclear salt reactors, for both high fidelity and systems simulations. Reactor and salt processing systems operate well above salt melting points (>600°C), so salt behavior can be well described by thermodynamics. However, much is not known about salt systems that contain two, three, or even more components. The Netzsch skimmer (commissioned this year) can be used in several configurations to collect data on molten systems. The skimmer uses mass spectrometry coupled with a thermogravimetric analyzer to accurately analyze systems up to 2000°C. Because the mass analyzer is coupled directly to the furnace through two nested orifices, there are no losses due to condensation. As a thermogravimetric analyzer, the skimmer measures weight loss and reaction energies simultaneously with evolved gas analysis. The mass spectrometry identifies gas phase species, and these volatility measurements can be used to derive vapor pressures. The skimmer was purchased in fiscal year 2018, delivered in April, installed in May 2019, and now is fully operational as verified by the analysis of known standards. The skimmer is unique because it will be available for study of salt systems that contain actinides or beryllium, although the additional work control to accommodate these hazards is still under review.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

2018 Site Environmental Report

The bald eagle (Haliaeetus leucocephalus) has been the proud national emblem of the United States of America since 1792. These majestic birds can have a wingspan from six to seven and a half feet and can live up to 20 years. They reach breeding age around four years of age and often mate for life, with nesting occurring in late winter. Eagles eat a variety of foods from fish to carrion. Eagle populations were historically impacted by shooting, the presence of heavy metals in waterways and, most significantly, by pesticides like DDT that caused thinning of egg shells. Here on Long Island, the bald eagle population has made a notable return, after being absent for nearly 100 years in New York State.

54 ENVIRONMENTAL SCIENCES↗

SX Tank Farm Interim Surface Barrier Vadose Zone Monitoring

The Hanford Site, in southeastern Washington State, has 149 underground single-shell tanks to store hazardous radioactive waste. A number of these tanks and their associated infrastructure (e.g., pipelines, diversion boxes) have leaked. While some of the leaked waste has entered the groundwater, the majority still resides in the vadose zone. Corrective measures are being taken to mitigate the groundwater impacts from past leaks and spills from contaminants that still reside within the vadose zone. Washington River Protection Solutions, LLC, constructed two interim surface barriers (identified as south and north ISBs) in 2018 over the southern portion of the 241-SX Tank Farm to minimize the migration of the residual contaminants in the vadose zone. Two monitoring instrument nests were installed in 2018 and the data acquisition system was put into function in September 2019. This document summarizes the monitoring methods, the instrument calibration and installation, and the vadose zone monitoring plan for the interim barriers in the SX tank farm.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hydrogen Transport in a Model 9979 Shipping Package with Inner Convenience Cans

Radiolytic hydrogen production and accumulation inside containment packages is a concern at any facility responsible for their packaging, storage, transportation, and/or disposal. When hydrogen gas accumulates to concentrations above the Lower Flammability Limit (LFL) which is 4% or 40,000 ppm in air, the possibility of a deflagration or explosion increases. This concern persists over the course of the package lifetime which is unlimited when disposed of by burial or in permanent repositories. Here, we report on a numerical model used to predict the concentration of hydrogen within each layer of a Model 9979 package containing a convenience can assembly. Simulations show the hydrogen concentration to always be highest in the inner convenience can containing the radioactive source. When the radioactive source is within the Los Alamos National Laboratory (LANL) Packaging Limits, the hydrogen concentration is shown to remain well below the LFL at all times including packaging, storage, transportation, and disposal. A hydrogen transport model is presented for a Model 9979 package system containing a nested arrangement of convenience cans, which are tin oxide coated steel cans of various sizes with a slip-lid assembly. The inner convenience can contains the radioactive source material along with an unknown quantity of incidental water acquired from humid air or processing. While visible organic materials such as paper and plastics were purposely excluded from the inner can, it is not possible to claim the wastes are entirely organic free. The inner convenience can is tape sealed and placed into a plastic bag which is horsetail closed (i.e., twisted and taped). The bagged can is placed into an outer convenience can that is also tape sealed. The can assembly is then placed into the 30 gallon drum and subsequently placed inside the 55 gallon drum in the 9979 package. Here we assume hydrogen gas is produced in the inner convenience can from alpha radiolysis of water at a rate dependent on the quantity of uranium isotopes and water present. The hydrogen transport model was used to calculate hydrogen accumulations within the package’s five layers at different times and conditions. These simulations serve two purposes; (i) to build confidence in the model by comparing predicted values to measured values, and (ii) to check the steady state hydrogen concentrations that are approached at long times in the package’s lifetime. Model simulations were compared to gas samples taken from the 30 gallon drum after storage at LANL’s Chemistry and Metallurgy Research (CMR) building for around 500 days. Hydrogen concentration calculations over much longer periods (i.e., more than 270 years) included extreme storage durations, transportation at extreme cold temperatures, and disposal of packages assuming different average temperatures.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Weighted greedy-optimal design of computer experiments for kernel-based and Gaussian process model emulation and calibration

This article is concerned with the approximation of high-dimensional functions by kernel-based methods. Motivated by uncertainty quantification, which often necessitates the construction of approximations that are accurate with respect to a probability density function of random variables, we aim at minimizing the approximation error with respect to a weighted $L^p$-norm. We present a greedy procedure for designing computer experiments based upon a weighted modification of the pivoted Cholesky factorization. The method successively generates nested samples with the goal of minimizing error in regions of high probability. Numerical experiments validate that this new importance sampling strategy is superior to other sampling approaches, especially when used with non-product probability density functions. We also show how to use the proposed algorithm to efficiently generate surrogates for inferring unknown model parameters from data.

97 MATHEMATICS AND COMPUTING↗