Search NASA⌕ Search

SEARCH · Search NASA

Results for “Neutron Diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Tracking the Progression of Anion Reorientational Behavior between α-Phase and β-Phase Alkali-Metal Silanides, MSiH 3 , by Quasielastic Neutron Scattering

Quasielastic neutron scattering (QENS) measurements over a wide range of energy resolutions were used to probe the reorientational behavior of the pyramidal SiH 3 - anions in the monoalkali silanides (MSiH 3 , where M = K, Rb, and Cs) within the low-temperature ordered β-phases, and for CsSiH 3 , the high-temperature disordered α-phase and intervening hysteretic transition region. Maximum jump frequencies of the β-phase anions near the β-α transitions range from around 10 9 s -1 for β-KSiH 3 to 10 10 s -1 and higher for β-RbSiH 3 and β-CsSiH 3 . The β-phase anions undergo uniaxial 3-fold rotational jumps around the anion quasi-C 3 symmetry axis. CsSiH 3 was the focus of further studies to map out the evolving anion dynamical behavior at temperatures above the β-phase region. As in α-KSiH 3 and α-RbSiH 3 , the highly mobile anions (with reorientational jump frequencies approaching and exceeding 10 12 s -1 ) in the disordered α-CsSiH 3 are all adequately modeled by H jumps between 24 different locations distributed radially around the anion center of gravity, although even higher anion reorientational disorder cannot be ruled out. QENS data for CsSiH 3 in the transition region between the α- and β-phases corroborated the presence of dynamically distinct intermediate ( i -) phase. The SiH 3 - anions within i -phase appear to undergo uniaxial small-angular-jump reorientations that are more akin to the lower-dimensional β-phase anion motions rather than to the multidimensional α-phase anion motions. Moreover, they possess orientational mobilities that are an order-of-magnitude lower than those for α-phase anions but also an order-of-magnitude higher than those for β-phase anions. Combined QENS and neutron powder diffraction results strongly suggest that this i -phase is associated chiefly with the more short-range-ordered, nanocrystalline portions (invisible to diffraction) that appear to dominate the CsSiH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Inversion of Many-Beam Bragg Intensities for Phasing by Iterated Projections: Removal of Multiple Scattering Artifacts from Diffraction Data

An iterated projection algorithm (N-Phaser) is developed that reconstructs a scattering potential from N-beam multiple Bragg scattered intensities. The method may be used to eliminate multiple scattering artifacts from electron diffraction data, solving the phase problem and increasing the thicknesses of samples used in materials science, solid-state chemistry, and small molecule crystallography. For high-energy transmission electron diffraction, we show that the algorithm recovers accurate complex structure factors from a wide range of thicknesses, orientations, and relativistic beam energies, and does not require known thickness or atomic-resolution data if sufficient multiple scattering occurs. Furthermore, extensions to Cryo-electron microscopy and Micro-electron diffraction are suggested.

36 MATERIALS SCIENCE↗
DOE OSTI2016

An Investigation of MCNP6.1 Beryllium Oxide S(α,β) Cross Sections

In MCNP6.1, materials are constructed by identifying the constituent isotopes (or elements in a few cases) individually. This list selects the corresponding microscopic cross sections calculated from the free-gas model to create the material macroscopic cross sections. The free-gas model and the corresponding material macroscopic cross sections assume that the interactions of atoms do not affect the nuclear cross sections. With certain compounds, the free-gas model cross sections are not sufficient because molecular effects or crystalline structure effects do affect the neutron scattering cross sections at low energies. These effects are included in the MCNP6.1 thermal scattering kernels, or S(α,β) thermal neutron scattering data. To treat a particular isotope (or isotopes) as a molecular compound in the thermal regime, one or more of the available S(α,β) data sets is selected (with the MT card). As MCNP6.1 transports particles, the free-gas model cross sections are used down to the energy where S(α,β) data are available. At that point, the S(α,β) cross sections automatically overrides the free-gas cross sections. Most of the S(α,β) files have a maximum energy of 10 eV. In MCNP6.1, a binary compound may have one or two S(α,β) libraries. Beryllium oxide (BeO) is one of the materials that has two S(α,β) libraries one for the beryllium S(α,β) cross sections (be-o) and one for the oxygen S(α,β) cross sections (o-be). From its moderating properties, it is apparent that the S(α,β) library for the beryllium must be included to accurately model beryllium oxide. The necessity of the S(α,β) library for oxygen is less clear because oxygen is a relatively poor moderator. This paper investigates the effect of using only the be-o S(α,β) library or using both be-o and o-be S(α,β) libraries. The objective is to provide guidance on the use of the beryllium oxide S(α,β) libraries in criticality safety analyses. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

On the Structural Transformation of Ni/BaH 2 During a N 2 -H 2 Chemical Looping Process for Ammonia Synthesis: A Joint In Situ Inelastic Neutron Scattering and First-Principles Simulation Study

The demand for decarbonizing the ammonia industry by using renewable energy has invoked increasing research interests into catalyst development for effective N 2 reduction under mild conditions. Hydride-based materials are among some of the emerging catalysts for ammonia synthesis at ambient pressure and low temperatures (< 673 K). A recent chemical looping process based on Ni/BaH 2 showed the most promise as it can realize ammonia production at a temperature as low as 373 K and under ambient pressure. However, the chemical transformation of the hydride catalyst at the molecular level remains unclear in this process. Here, we report detailed in situ neutron spectroscopy and diffraction investigations along with first-principles simulations on the structural transformation of Ni/BaH 2 during the nitridation and hydrogenation steps in the chemical looping process for ammonia synthesis. It was shown that a ball-milling process of the starting Ni/BaH 2 could significantly decrease the size of BaH 2 and increase the density of defects, thus potentially enhancing the reactivity of the hydride. The evolution from BaH 2 to barium imide (BaNH) was evidenced in the inelastic neutron scattering (INS) and neutron diffraction results during the N 2 reaction step. During the hydrogenation study, in addition to the recovery of BaH 2 , a possible intermediate species, N-deficient barium imide, was also detected. In comparing the N 2 and H 2 reaction steps, the neutron results indicate that the hydrogenation step appears more difficult than the nitridation step, confirming the facile N 2 fixation property of Ni/BaH 2 catalyst in ammonia synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Bibliometric review and recent advances in total scattering pair distribution function analysis: 21 years in retrospect

Global research activities have been driven by the quest to develop and characterize novel materials for technological advancements. The total scattering pair distribution function (TSPDF) is a powerful and versatile characterization technique for examining the structural details of diverse complex materials including liquid, amorphous, disordered crystalline, and nanostructured materials. Thus, it is critical to keep track of research progress, identify research gaps, and future research directions of the application of the TSPDF technique in materials development and discovery. In this work, a bibliometric analysis of literature regarding the TSPDF technique between 2000 and 2021 was conducted using datasets retrieved from the Web of Science database. The research trends based on publication outputs, research subject distribution, co-authorships among institutions, countries/regions, co-citation of referenced sources, and keyword co-occurrence are evaluated and discussed herein. The impact of the TSPDF technique is projected to increase due to its importance in probing emerging functional materials, and the advances in specialized facilities and instrumentation among the scientific communities engaged with it. Finally, current and emerging research hotspots related to TSPDF technique such as catalysis, computer modeling and simulation, pharmaceutics, machine learning, hydrogen storage, battery materials, and layered structured materials are also identified and discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

YbCuBi ARCS + POWGEN data

This dataset contains temperature-dependent powder diffraction patterns collected at POWGEN, SNS (10K - 520K), and inelastic neutron scattering data collected at ARCS, SNS at corresponding temperatures on YbCuBi powder samples.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Development of a thermal neutron scattering law for polyethylene using molecular dynamics simulations

Polyethylene is an organic polymer that has been used as a neutron moderator and reflector material in various assemblies designed to perform critical and subcritical experiments. Neutrons that are produced within an assembly containing polyethylene will interact with its various atomic components (especially hydrogen) to slow down and eventually reach thermal energies. In this work, the thermal neutron scattering cross sections are generated in support of criticality safety analysis of neutronic assemblies that utilize polyethylene. Polyethylene is composed of ethylene (C{sub 2}H{sub 4}) monomers that are attached in long molecular chains producing the polymer structure. The principle neutron scatterer in this material is hydrogen. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Full Law Analysis Scattering System Hub (FLASSH)

In neutronic systems such as thermal reactors, the thermal neutron plays a fundamental role in the system behavior. Therefore, high fidelity thermal neutron scattering cross section evaluations are required in the design of such systems. Because the de Broglie wavelength of thermal neutrons is comparable to the atomic separation distance in matter, the neutron scattering behavior in the energy region of atomic thermal motion is fundamentally different from high energy regions. In recent years, algorithms and theories of thermal neutron scattering have been developed and verified. Based on that effort, a capability for full analysis of the scattering law in an atomistic system (FLASSH) has been developed. FLASSH not only reproduces the evaluations of conventional thermal neutron scattering codes, such as the LEAPR and THERMR modules of the NJOY code, but also improves the accuracy of evaluations by removing or relaxing numerous approximations and by implementing advanced algorithm. In this work, α-SiO{sub 2} and crystalline beryllium metal are taken as examples to demonstrate the evaluation of the inelastic thermal scattering cross section and the coherent elastic scattering cross section using FLASSH.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Pressure-induced phase transition in barium hydride studied with neutron scattering

Barium hydride can undergo a structural phase transition from an orthorhombic phase to a hexagonal phase induced by high temperature or high pressure. This transition causes an immediate increase in the hydrogen diffusion rates by over an order of magnitude, and therefore, understanding the origin and details of such transition is of great interest not only for fundamental reasons but also for improving materials for future applications. In this work, the pressure evolution of the crystal structure was characterized using neutron powder diffraction up to a maximum pressure of 11.3 GPa. The pressure dependence of the unit cell volumes, lattice parameters, atomic sites, and compressibilities were determined for both phases. A structural phase transition occurred over a wide pressure range of P = 1.3 GPa–4.9 GPa. The transition to the higher density hexagonal phase reduced the volume per formula unit of BaD 2 by 13.6%, hence increasing the volumetric storage density. In addition, we investigated the hydrogen diffusion process using high pressure quasi-elastic neutron scattering up to 7.1 GPa. Our results show that the hydrogen mobility increases with pressure in the hexagonal phase. This work sheds light on the structural and dynamical aspects of barium hydride caused by the application of high pressure. Finally, the results may aid in the development of advanced metal hydride systems with increased hydrogen dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2019

On a measurement approach to support evaluation of thermal scattering law data

Inelastic thermal neutron scattering in materials that act as neutron moderators, reflectors, and filters results in shaping the neutron spectrum at low energies. This phenomenon is described using differential scattering cross sections calculated from three components including the bound atom (i.e., nuclear) scattering cross section of the neutron, the ratio of the outgoing and incoming neutron energy, and the thermal scattering law (TSL), i.e., S(α,β), where α and β represent dimensionless momentum and energy exchange variables, respectively. To date, no TSL libraries are generated using measured data. However, valuable information may be derived from measurements and “targeted” experiments that can validate TSL data and the related inelastic scattering cross sections. As a demonstration, a suite of coordinated measurements and experiments is described that was designed and used to support the evaluation of the TSL for “nuclear” graphite. This experimental suite includes neutron powder diffraction (for structure analysis), positron annihilation (for nano porosity assessment), inelastic neutron scattering measurements using a chopper spectrometer, transmission experiments using neutrons with energy below the Bragg cutoff thereby accessing the total (inelastic) cross section, and a slowing-downtime experiment to observe the developing neutron spectrum in the material. We find that this experimental suite was key to understanding the difference in TSL between “nuclear” and “ideal” graphite and for the inclusion of “nuclear” graphite in the ENDF/B-VIII.0 nuclear data library release.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Quantitative Analysis of the Morphology of {101} and {001} Faceted Anatase TiO 2 Nanocrystals and Its Implication on Photocatalytic Activity

The atomistic structure and morphology (shape and size) of nanomaterials have strong influences on their physical and chemical properties. However, many characterization techniques focus exclusively on one length-scale regime or another when developing quantitative morphology/structural models. In this article, we demonstrate that powder X-ray diffraction and neutron pair distribution function (PDF) can be used to obtain accurate average morphology and atomistic structure of {001} and {101} faceted anatase TiO 2 nanocrystals based on differential evolution refinements using Debye scattering equation calculations. It is also demonstrated that the morphology polydispersity of TiO 2 nanocrystals can be effectively obtained from the diffraction data via a numerical refinement routine. The morphology refinement results are in good agreement with those from transmission electron microscopy and the modeling of small angle neutron scattering data. This method is successfully used to quantify the facet-specified photocatalytic hydrogen evolution activity of anatase TiO 2 nanocrystals with different {001} to {101} ratios. It is found that the sample with an intermediate amount of both {001} and {101} facets shows the best photocatalytic hydrogen evolution reaction (HER) activity. It is expected that the simultaneous structure and morphology refinement technique can be generally used to study the relationship between morphology and functionality of nanomaterials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantum information approach to the implementation of a neutron cavity

Abstract Using the quantum information model of dynamical diffraction we consider a neutron cavity composed of two perfect crystal silicon blades capable of containing the neutron wavefunction. We show that the internal confinement of the neutrons through Bragg diffraction can be modelled by a quantum random walk. Furthermore, we introduce a toolbox for modelling crystal imperfections such as surface roughness and defects. Good agreement is found between the simulation and the experimental implementation, where leakage beams are present, modelling of which is impractical with the conventional theory of dynamical diffraction. Analysis of the standing neutron waves is presented in regards to the crystal geometry and parameters; and the conditions required for well-defined bounces are derived. The presented results enable new approaches to studying the setups utilizing neutron confinement, such as the experiments to measure neutron magnetic and electric dipole moments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Low-Frequency Phonon Driven Negative Thermal Expansion in Cubic GaFe(CN) 6 Prussian Blue Analogues

Here, the understanding of the negative thermal expansion (NTE) mechanism is vital not only for the development of new NTE compounds but also for effectively controlling thermal expansion. Here, we report an interesting isotropic NTE property in cubic GaFe(CN) 6 Prussian blue analogues (α l = –3.95 × 10 –6 K –1 , 100–475 K), which is a new example to understand the complex NTE mechanism. A combined study of synchrotron X-ray diffraction, X-ray total scattering, X-ray absorption fine structure, neutron powder diffraction, and density functional theory calculations shows that the NTE of GaFe(CN)6 originates from the low-frequency phonons (< ~100 cm –1 ), which are directly related to the transverse vibrations of the atomic –Ga–N≡C–Fe– chains. Both the Ga–N and Fe–C chemical bonds are much softer to bend than to stretch. The direct evidence that transverse vibrational contribution to the NTE of GaFe(CN) 6 is dominated by N, instead of C atoms, is illustrated. It is interesting to find that the polyhedra of GaFe(CN) 6 are not rigid, which is a starting assumption in some models describing the NTE properties of other systems. The NTE mechanism can be vividly described by the “guitar-string” effect, which would be the common feature for the NTE property of many open-framework functional materials, such as Prussian blue analogues, oxides, cyanides, metal–organic frameworks, and zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Large Positive Zero-Field Splitting in the Cluster Magnet Ba 3 CeRu 2 O 9

Herein we present the synthesis and magnetic characterization of a polycrystalline sample of the 6H-perovskite Ba 3 CeRu 2 O 9 , which consists of Ru dimers based on face-sharing RuO 6 octahedra. Our low-temperature magnetic susceptibility, magnetization, and neutron powder diffraction results reveal a nonmagnetic singlet ground state for the dimers. Inelastic neutron scattering, infrared spectroscopy, and the magnetic susceptibility over a wide temperature range are best explained by a molecular orbital model with a zero-field splitting parameter D = 85 meV for the S tot = 1 electronic ground-state multiplet. This large value is likely due to strong mixing between this ground-state multiplet and low-lying excited multiplets, arising from a sizable spin molecular orbital coupling combined with an axial distortion of the Ru 2 O 9 units. Although the positive sign for the splitting ensures that Ba 3 CeRu 2 O 9 is not a single molecule magnet, our work suggests that the search for these interesting materials should be extended beyond Ba 3 CeRu 2 O 9 to other molecular magnets based on metal–metal bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Postsynthetic Functionalization of Mg-MOF-74 with Tetraethylenepentamine: Structural Characterization and Enhanced CO 2 Adsorption

Postsynthetic functionalization of magnesium 2,5-dihydroxyterephthalate (Mg-MOF-74) with tetraethylenepentamine (TEPA) resulted in improved CO 2 adsorption performance under dry and humid conditions. XPS, elemental analysis, and neutron powder diffraction studies indicated that TEPA was incorporated throughout the MOF particle, although it coordinated preferentially with the unsaturated metal sites located in the immediate proximity to the surface. Neutron and X-ray powder diffraction analyses showed that the MOF structure was preserved after amine incorporation, with slight changes in the lattice parameters. The adsorption capacity of the functionalized amino-Mg-MOF-74 (TEPA-MOF) for CO 2 was as high as 26.9 wt % versus 23.4 wt % for the original MOF due to the extra binding sites provided by the multiunit amines. Here, the degree of functionalization with the amines was found to be important in enhancing CO 2 adsorption, as the optimal surface coverage improved performance and stability under both pure CO 2 and CO 2 /H 2 O coadsorption, and with partially saturated surface coverage, optimal CO 2 capacity could be achieved under both wet and dry conditions by a synergistic binding of CO 2 to the amines as well as metal centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

High Pressure X-Ray Diffraction Studies of Nanocrystalline Materials

Experimental evidence obtained for a variety of nanocrystalline materials suggest that the crystallographic structure of a very small size particle deviates from that in the bulk crystals. In this paper we show the effect of the surface of nanocrystals on their structure by the analysis of generation and distribution of macro- and micro-strains at high pressures and their dependence on the grain size in nanocrystalline powders of Sic. We studied the structure of Sic nanocrystals by in-situ high-pressure powder diffraction technique using synchrotron and neutron sources and hydrostatic or isostatic pressure conditions. The diffraction measurements were done in HASYLAB at DESY using a Diamond Anvil Cell (DAC) in the energy dispersive geometry in the diffraction vector range up to 3.5 - 4/A and under pressures up to 50 GPa at room temperature. In-situ high pressure neutron diffraction measurements were done at LANSCE in Los Alamos National Laboratory using the HIPD and HIPPO diffractometers with the Paris-Edinburgh and TAP-98 cells, respectively, in the diffraction vector range up to 26 Examination of the response of the material to external stresses requires nonstandard methodology of the materials characterization and description. Although every diffraction pattern contains a complete information on macro- and micro-strains, a high pressure experiment can reveal only those factors which contribute to the characteristic diffraction patterns of the crystalline phases present in the sample. The elastic properties of powders with the grain size from several nm to micrometers were examined using three methodologies: (l), the analysis of positions and widths of individual Bragg reflections (used for calculating macro- and micro-strains generated during densification) [I], (2). the analysis of the dependence of the experimental apparent lattice parameter, alp, on the diffraction vector Q [2], and (3), the atomic Pair Distribution Function (PDF) technique [3]. The results of our studies show, that Sic nanocrystals have the features of two phases, each with its distinct elastic properties. and under pressures up to 8 GPa.

Palosz, B.↗