Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROFILED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

A regression technique for determining temperature profiles in the upper stratosphere from satellite-measured radiances.

A technique is described whose application makes it possible to almost double the altitude range over which useful temperature profiles may be obtained. For a wide range of atmospheric temperature profiles, the temperature structure between 30 and 55 km may be derived with an expected error of less than 3 C at 30 km to less than 10 C at 55 km, given the temperature structure in the lower 30 km of the profile, and given a consistent and accurate set of radiance observations. For strongly anomalous conditions in the stratosphere, the accuracy of retrievals at tropospheric levels may also be substantially improved.

Gelman, M. E.↗

The lunar conductivity profile and the nonuniqueness of electromagnetic data inversion.

A review of the theory for the electromagnetic functional used to date to determine the lunar conductivity profile from spectral analyses of lunar magnetometer data. The 'hard' boundary condition used by Sonett et al. (1971) and others appears to be a good approximation for the sunlit lunar hemisphere. The use of the spectral data in conjunction with the functional to find a least squares conductivity profile is examined from the point of view of the nonuniqueness of nonlinear estimation. An unsuccessful search was carried out to find models that were both geophysically reasonable and consistent with the data. It is asserted that the failure to find these models is due to the inadequacy of the functional. Of the models generated, those that best fit the data all have a conductivity peak at a depth of 240 km similar to that of the model discussed by Sonett et al. However, all of these models are quite distinct elsewhere in the profile. It is shown how such models are dependent on both the nature of the functional as well as the initial guess in the least squares procedure. A correlation analysis shows that the only resolvable features from this type of model are a low conductivity crust, a high conductivity peak of limited radial extent, and a low conductivity zone beneath the peak.

Phillips, R. J.↗

Monthly and annual percentage levels of wind speed differences computed by using FPS-16 radar/Jimsphere wind profile data from Cape Kennedy, Florida

The percentage levels of wind speed differences are presented computed from sequential FPS-16 radar/Jimsphere wind profiles. The results are based on monthly profiles obtained from December 1964 to July 1970 at Cape Kennedy, Florida. The profile sequences contain a series of three to ten Jimspheres released at approximately 1.5-hour intervals. The results given are the persistence analysis of wind speed difference at 1.5-hour intervals to a maximum time interval of 12 hours. The monthly percentage of wind speed differences and the annual percentage of wind speed differences are tabulated. The percentage levels are based on the scalar wind speed changes calculated over an altitude interval of approximately 50 meters and printed out every 25 meters as a function of initial wind speed within each five-kilometer layer from near sea level to 20 km. In addition, analyses were made of the wind speed difference for the 0.2 to 1 km layer as an aid for studies associated with take-off and landing of the space shuttle.

Susko, M.↗

Development of termination and utilization concepts for flat conductor cables. Volume 1: Development of low profile flat conductor cable connecting device and permanent splice

The development of low-profile flat conductor cable (FCC) connecting device and FCC permanent splice methods are discussed. The design goal for the low-profile connecting device was to mate and unmate FCC harness to a typical spacecraft component with a maximum height of 3/8 in. The results indicate that the design, fabrication, and processing of the low-profile connecting device are feasible and practical. Some redesign will be required to achieve the goal of 3/8 in. Also, failures were experienced subsequent to salt spray and humidity exposure. Five different FCC permanent splice methods were considered. Subsequent to evaluation of these five methods, two design concepts were chosen for development tests.

Source record↗

A modified wall wake velocity profile for turbulent compressible boundary layers.

The law of the wake and the law of the wall in incompressible turbulent boundary layers formulated by Coles (1956) and their use by Mathews et al. (1970) in the development of a wall-wake representation of the velocity profile in a form applicable for isoenergetic compressible boundary layers are extended to a modified wall-wake velocity profile for turbulent compressible boundary layers. The modified wall-wake profile is shown to provide good representations of experimental velocity distributions.

Sun, C.-C.↗

Effect of radiometric errors on accuracy of temperature-profile measurement by the spectral-scanning method.

The spectral-scanning method may be used to determine the temperature profile of a jet- or rocket-engine exhaust stream by measurements of gas radiation and transmittance at two or more wavelengths. A single, fixed line of sight is used, using immobile radiators and radiometers outside of the gas stream, and there is no interference with the flow. A given radiometric error causes an error in computed temperatures. The ratio between temperature error and radiometric error depends on profile shape, path length, temperature level, the strength of line absorption, and the absorption coefficient and its temperature coefficient. These influence the choice of wavelengths for any given gas. Conditions for minimum temperature error are derived. Numerical results are presented for a two wavelength measurement on a family of profiles that may be expected in a practical case of H2 - O2 combustion. Under favorable conditions, the fractional error in temperature approximates the fractional error in radiant-flux measurement.

Buchele, D. R.↗

Spectral structure of tropospheric vertical temperature profiles over Cape Kennedy, Florida.

Recent Jimsphere/Jimsonde measurements of tropospheric temperature profile spectra in the wavelength band from 50 to 2000 meters above the atmospheric boundary layer, taken over Cape Kennedy, Florida, are summarized. The results suggest that the spectra can be represented in the nondimensional form (omega sub g/sigma sub w)phi(k)/sigma sub T squared = S(K), where phi(k) is the temperature profile spectrum at wave number k, omega sub g is the Brunt-Vasala frequency, sigma sub w and sigma sub T denote the standard deviations of the vertical velocity and temperature profiles, and S is a universal function of nondimensional wave number K = k sigma sub w/omega sub g.

Fichtl, G. H.↗

Airborne profiling of ice thickness using a short pulse radar

The acquisition and interpretation of ice thickness data from a mobile platform has for some time been a goal of the remote sensing community. Such data, once obtainable, is of value in monitoring the changes in ice thickness over large areas, and in mapping the potential hazards to traffic in shipping lanes. Measurements made from a helicopter-borne ice thickness profiler of ice in Lake Superior, Lake St. Clair and the St. Clair river as part of NASA's program to develop an ice information system are described. The profiler described is a high resolution, non-imaging, short pulse radar, operating at a carrier frequency of 2.7 GHz. The system can resolve reflective surfaces separated by as little as 10 cm. and permits measurement of the distance between resolvable surfaces with an accuracy of about 1 cm. Data samples are given for measurements both in a static (helicopter hovering), and a traverse mode. Ground truth measurements taken by an ice auger team traveling with the helicopter are compared with the remotely sensed data and the accuracy of the profiler is discussed based on these measurements.

Vickers, R. S.↗

High resolution system for upper air (troposphere) wind and temperature profile measurements

The Jimsphere/Jimsonde system is described and some possible applications of the system for air-sea interface measurements are presented. As space vehicles became larger and more sophisticated, an improved method for obtaining wind profile data had to be found. To satisfy this need the FPS-16 radar/Jimsphere system was developed. The Jimsphere is an aluminized mylar spherical balloon, two meters in diameter. The balloon is under superpressure, and is tracked with a high precision radar system. The development of this detailed wind profile system was started in 1963, and the present design was established in 1964. To improve the system, a program was initiated in 1965 to obtain high resolution temperature data simultaneously with the wind profile data.

Camp, D. W.↗

Line profiles and turbulence generated by acoustic waves in the solar chromosphere. II - Contours of the Ca II and Mg II K lines

Making use of the time-averaged absorption profiles derived by Oster and Ulmschneider, non-LTE line formation in the context of a two-level atom is investigated for an isothermal atmosphere and for the Ca II and Mg II K lines in the solar chromosphere as represented by the Harvard-Smithsonian Reference Atmosphere. Source functions and emergent line profiles are computed for a variety of assumptions concerning the acoustically broadened profiles and the solar velocity fields.

Shine, R. A.↗

A new measurement of the Hercules X-1 X-ray pulse profile

Report on measurements of a triple-peaked 1.24-sec pulse profile in a 1-minute rocket-borne exposure to Her X-1, in contrast to the double-peaked profiles expected from models which maximize the X-ray emission at the magnetic equator of an accreting neutron star. The profile exhibits statistically significant energy dependence, with the emission greater than about 12 keV having narrower peaks which appear to lag (by approximately 5% of the pulse period) the corresponding peaks at lower energies. Approximately one-third of the total emission from the source is nonpulsed.

Holt, S. S.↗

Optimal rocket thrust profile shaping using third degree spline function interpolation

Optimal solid-rocket thrust profiles for the parallel-burn, solid-rocket-assisted space shuttle are investigated. Solid-rocket thrust profiles are simulated by using third-degree spline functions, with the values of the thrust ordinates defined as parameters. The profiles are optimized parametrically, using the Davidon-Fletcher-Powell penalty function method, by minimizing propellant weight subject to state and control inequality constraints and to terminal boundary conditions. This study shows that optimizing a control variable parametrically by using third-degree spline function interpolation allows the control to be shaped so that inequality constraints are strictly adhered to and all corners are eliminated. The absence of corners, which is realistic in nature, makes this method attractive from the viewpoint of solid rocket grain design.

Johnson, I. L.↗

A new measurement of the Her X-1 X-ray pulse profile

A triple peaked 1.24 sec. pulse profile in a 1-minute rocket borne exposure to Her X-1 was measured, in contrast to the doublepeaked profiles expected from models which maximize the X ray emission at the magnetic equator of an accreting neutron star. The profile exhibits statistically significant energy dependence, with the emission approximately greater than 12 keV having narrower peaks which lag (by approximately 5% of the pulse period) the corresponding peaks at lower energies. Approximately one third of the total emission from the source is nonpulsed.

Holt, S. S.↗

Effect of thermal profile on cyclic flaw growth in aluminum

Surface flawed and single edge notch tension specimens of 2219-T851 and -T87 aluminum were tested to determine static fracture characteristics and base line (constant amplitude, constant temperature) cyclic flaw growth behavior. Subsequent testing was then conducted in which flawed specimens were subjected to a thermal profile in which the applied stress was varied simultaneously with the temperature. The profile used represents a simplified space shuttle orbiter load/temperature flight cycle. Test temperatures included the range from 144K (-200 F) up to 450K (350 F). The measured flaw growth rates obtained from the thermal profile tests were then compared with rates predicted by assuming linear cumulative damage of base line rates.

Engstrom, W. L.↗

Elevation profiles of the moon

Five MHz radar data obtained from the Apollo 17 mission are used to determine elevation profiles of the moon. A change in range of one quarter of a wavelength (15 m for the 5 MHz radar) changes the round-trip radar range one half wavelength or 180 deg, thus allowing determination of the relative surface profile or slope with a high degree of precision. The technique of deriving the range or altimetry measurement from the range-Doppler data record on film yields a better understanding of the range accuracy. The presence of fade intervals can be observed directly and their effect on the profile measurement reduced to a minimum. The maria used to generate the center of maria are Western Procellarum, Serenitatis, and Crisium. The location of the center of mare relative to the center of figure and center of mass is identified.

Brown, W. E., Jr.↗

High-resolution system for tropospheric wind and temperature profile measurements

This paper briefly describes the Jimsphere/Jimsonde system and presents some possible applications of the system. As space vehicles became larger and more sophisticated, an improved method for obtaining wind-profile data had to be found. To satisfy this need, the FPS-16 radar/Jimsphere system was developed. The Jimsphere is an aluminized mylar spherical balloon 2 m in diameter. The balloon is under superpressure and is tracked with a high-precision radar system. The development of this detailed wind-profile system was started in 1963, and the present design was established in 1964. To improve the system, a program was initiated in 1965 to obtain high-resolution temperature data simultaneously with the wind-profile data.

Camp, D. W.↗

A wall-wake velocity profile for turbulent compressible boundary layers with heat transfer

A modified form of the wall-wake profile which is applicable to flows with heat transfer is presented. The modified profile takes into account the effect of a turbulent Prandtl number; it was found to provide a good representation of the experimental data from several sources. The C sub f values which are determined by a least squares fit of the profile to the data agree well with values which were measured by the floating element technique.

Sun, C. C.↗

Computer simulation of an aircraft-based differential absorption and scattering system for retrieval of SO2 vertical profiles

The feasibility of using the differential absorption and scattering technique from aircraft altitudes for remotely measuring the vertical distribution of SO2 was studied via a computer simulation. Particular care was taken in this simulation to use system parameters (i.e., laser energy, telescope size, etc.) which can be accommodated on an aircraft and can be realized with commercially available technology. The vertical molecular and aerosol profiles were chosen to simulate the types of profiles which might be experienced over a large city. Results are presented on the retrieval of the assumed SO2 profile which show the effects of systematic errors due to interfering gases and aerosols, as well as random errors due to shot noise in the return signal, detector and background noise, and instrument-generated noise.

Hoell, J. M., Jr.↗