Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

A forward bias method for lag correction of an a-Si flat panel detector

Purpose: Digital a-Si flat panel (FP) x-ray detectors can exhibit detector lag, or residual signal, of several percent that can cause ghosting in projection images or severe shading artifacts, known as the radar artifact, in cone-beam computed tomography (CBCT) reconstructions. A major contributor to detector lag is believed to be defect states, or traps, in the a-Si layer of the FP. Software methods to characterize and correct for the detector lag exist, but they may make assumptions such as system linearity and time invariance, which may not be true. The purpose of this work is to investigate a new hardware based method to reduce lag in an a-Si FP and to evaluate its effectiveness at removing shading artifacts in CBCT reconstructions. The feasibility of a novel, partially hardware based solution is also examined. Methods: The proposed hardware solution for lag reduction requires only a minor change to the FP. For pulsed irradiation, the proposed method inserts a new operation step between the readout and data collection stages. During this new stage the photodiode is operated in a forward bias mode, which fills the defect states with charge. A Varian 4030CB panel was modified to allow for operation in the forward bias mode. The contrast of residual lag ghosts was measured for lag frames 2 and 100 after irradiation ceased for standard and forward bias modes. Detector step response, lag, SNR, modulation transfer function (MTF), and detective quantum efficiency (DQE) measurements were made with standard and forward bias firmware. CBCT data of pelvic and head phantoms were also collected. Results: Overall, the 2nd and 100th detector lag frame residual signals were reduced 70%-88% using the new method. SNR, MTF, and DQE measurements show a small decrease in collected signal and a small increase in noise. The forward bias hardware successfully reduced the radar artifact in the CBCT reconstruction of the pelvic and head phantoms by 48%-81%. Conclusions: Overall, the forward bias method has been found to greatly reduce detector lag ghosts in projection data and the radar artifact in CBCT reconstructions. The method is limited to improvements of the a-Si photodiode response only. A future hybrid mode may overcome any limitations of this method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Defect‐Free Nanowelding of Bilayer SnSe Nanoplates

Nanowelding is a bottom‐up technique to create custom‐designed nanostructures and devices beyond the precision of lithographic methods. Here, a new technique is reported based on anisotropic lubricity at the van der Waals interface between monolayer and bilayer SnSe nanoplates and a graphene substrate to achieve precise control of the crystal orientation and the interface during the welding process. As‐grown SnSe monolayer and bilayer nanoplates are commensurate with graphene's armchair direction but lack commensuration along graphene's zigzag direction, resulting in a reduced friction along that direction and a rail‐like, 1D movement that permits joining nanoplates with high precision. This way, molecular beam epitaxially grown SnSe nanoplates of lateral sizes 30–100 nm are manipulated by the tip of a scanning tunneling microscope at room temperature. In situ annealing is applied afterward to weld contacting nanoplates without atomic defects at the interface. This technique can be generalized to any van der Waals interfaces with anisotropic lubricity and is highly promising for the construction of complex quantum devices, such as field effect transistors, quantum interference devices, lateral tunneling junctions, and solid‐state qubits.

2D ferroelectrics↗

Antiferromagnetic defect structure in LaNi O 3 – δ single crystals

Here, the origins of the metal-insulator and magnetic transitions exhibited by perovskite rare-earth nickelates, R NiO 3 (where R is a rare-earth element), remain open issues, with charge disproportionation, magnetic interactions, and lattice response across multiple length scales being among the many possible origins. Recently, growth of single crystals of LaNiO 3 , which is the only member of these compounds that remains metallic in its ground state, has been reported, opening a new chapter in the investigation of the perovskite nickelates. Here, using a combination of magnetometry, heat capacity, and neutron scattering on as-grown and purposely reduced LaNiO 3–δ crystals, we show that both antiferromagnetic and ferromagnetic phases with a Néel temperature of ~152 K and a Curie temperature of ~225 K can be induced by reduction of the oxygen content. Transmission electron microscopy shows that these phases are characterized by ordered oxygen vacancy defect structures that exist as dilute secondary phases in as-grown crystals despite growth in partial oxygen pressures up to at least 130 bar. The demonstration of antiferromagnetism resulting from oxygen vacancy ordered structures implies that stoichiometry must be explicitly considered when interpreting the bulk properties of LaNiO 3–δ single crystals; accordingly, the implications of our results for putative oxygen-stoichiometric LaNiO 3 are discussed.

36 MATERIALS SCIENCE↗

Characterization of a beta-catenin nuclear localization defect in MCF-7 breast cancer cells

Beta-catenin plays a key role in transducing Wnt signals from the plasma membrane to the nucleus. Here we characterize an unusual subcellular distribution of beta-catenin in MCF-7 breast cancer cells, wherein beta-catenin localizes to the cytoplasm and membrane but atypically did not relocate to the nucleus after Wnt treatment. The inability of Wnt or the Wnt agonist LiCl to induce nuclear localization of beta-catenin was not due to defective nuclear transport, as the transport machinery was intact and ectopic GFP-beta-catenin displayed rapid nuclear entry in living cells. The mislocalization is explained by a shift in the retention of beta-catenin from nucleus to cytoplasm. The reduced nuclear retention is caused by unusually low expression of lymphoid enhancer factor/T-cell factor (LEF/TCF) transcription factors. The reconstitution of LEF-1 or TCF4 expression rescued nuclear localization of beta-catenin in Wnt treated cells. In the cytoplasm, beta-catenin accumulated in recycling endosomes, golgi and beta-COP-positive coatomer complexes. The peripheral association with endosomes diminished after Wnt treatment, potentially releasing β-catenin into the cytoplasm for nuclear entry. We propose that in MCF-7 and perhaps other breast cancer cells, beta-catenin may contribute to cytoplasmic functions such as ER-golgi transport, in addition to its transactivation role in the nucleus. - Highlights: • MCF-7 breast cancer cells are defective for beta-catenin nuclear accumulation. • Beta-catenin nuclear retention is lost in MCF-7 cells due to poor LEF1/TCF expression. • Beta-catenin accumulates in the cytoplasm at endosomes and golgi in MCF-7 cells. • Wnt signaling can stimulate release of beta-catenin from endosomes.

60 APPLIED LIFE SCIENCES↗

Bismuth chalcohalides and oxyhalides as optoelectronic materials

Several Tl and Pb based halides and chalcohalides have recently been discovered as promising optoelectronic materials [i.e., photovoltaic (PV) and gamma-ray detection materials]. Efficient carrier transport in these materials is attributed partly to the special chemistry of ns 2 ions (e.g., Tl + , Pb 2+ , and Bi 3+ ). However, the toxicity of Tl and Pb is challenging to the development and the wide use of Tl and Pb based materials. In this paper, we investigate materials that contain Bi 3+ , which is also an ns 2 ion. By combining Bi halides with Bi chalcogenides or oxides, the resulting ternary compounds exhibit a wide range of band gaps, offering opportunities in various optoelectronic applications. Density functional calculations of electronic structure, dielectric properties, optical properties, and defect properties are performed on selected Bi 3+ based chalcohalides and oxyhalides, i.e., BiSeBr, BiSI, BiSeI, and BiOBr. We propose different applications for these Bi compounds based on calculated properties, i.e., n-BiSeBr, p-BiSI, and p-BiSeI as PV materials, BiSeBr and BiSI as room-temperature radiation detection materials, and BiOBr as a p-type transparent conducting material. BiSeBr, BiSI, and BiSeBr have chain structures while BiOBr has a layered structure. However, in BiSI, BiSeI, and BiOBr, significant valence-band dispersion is found in the directions perpendicular to the atomic chain or layer because the valence-band edge states are dominated by the halogen states that have strong interchain or interlayer coupling. We find significantly enhanced Born effective charges and anomalously large static dielectric constants of the Bi compounds, which should reduce carrier scattering and trapping and promote efficient carrier transport in these materials. The strong screening and the small anion coordination numbers in Bi chalcohalides should lead to weak potentials for electron localization at anion vacancies. As a result, defect calculations indeed show that the anion vacancies (Se and Br vacancies) in BiSeBr are shallow, which is beneficial to efficient electron transport.

36 MATERIALS SCIENCE↗

The exo-β- N -acetylmuramidase NamZ from Bacillus subtilis is the founding member of a family of exo-lytic peptidoglycan hexosaminidases

Endo-β-N-acetylmuramidases, commonly known as lysozymes, are well-characterized antimicrobial enzymes that catalyze an endo-lytic cleavage of peptidoglycan; i.e., they hydrolyze the β-1,4-glycosidic bonds connecting N-acetylmuramic acid (MurNAc) and N-acetylglucosamine (GlcNAc). In contrast, little is known about exo-β-N-acetylmuramidases, which catalyze an exo-lytic cleavage of β-1,4-MurNAc entities from the non-reducing ends of peptidoglycan chains. Such an enzyme was identified earlier in the bacterium Bacillus subtilis, but the corresponding gene has remained unknown so far. We now report that ybbC of B. subtilis, renamed namZ, encodes the reported exo-β-N-acetylmuramidase. A ΔnamZ mutant accumulated specific cell wall fragments and showed growth defects under starvation conditions, indicating a role of NamZ in cell wall turnover and recycling. Recombinant NamZ protein specifically hydrolyzed the artificial substrate para-nitrophenyl β-MurNAc and the peptidoglycan-derived disaccharide MurNAc-β-1,4-GlcNAc. Together with the exo-β-N-acetylglucosaminidase NagZ and the exo-muramoyl-L-alanine amidase AmiE, NamZ degraded intact peptidoglycan by sequential hydrolysis from the non-reducing ends. A structure model of NamZ, built on the basis of two crystal structures of putative orthologs from Bacteroides fragilis, revealed a two-domain structure including a Rossmann-fold-like domain that constitutes a unique glycosidase fold. Thus, NamZ, a member of the DUF1343 protein family of unknown function, is now classified as the founding member of a new family of glycosidases (CAZy GH171). NamZ-like peptidoglycan hexosaminidases are mainly present in the phylum Bacteroidetes and less frequently found in individual genomes within Firmicutes (Bacilli, Clostridia), Actinobacteria, and γ-proteobacteria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel low energy electron microscope for DNA sequencing and surface analysis

Monochromatic, aberration-corrected, dual-beam low energy electron microscopy (MAD-LEEM) is a novel technique that is directed towards imaging nanostructures and surfaces with sub-nanometer resolution. The technique combines a monochromator, a mirror aberration corrector, an energy filter, and dual beam illumination in a single instrument. The monochromator reduces the energy spread of the illuminating electron beam, which significantly improves spectroscopic and spatial resolution. Simulation results predict that the novel aberration corrector design will eliminate the second rank chromatic and third and fifth order spherical aberrations, thereby improving the resolution into the sub-nanometer regime at landing energies as low as one hundred electron-Volts. The energy filter produces a beam that can extract detailed information about the chemical composition and local electronic states of non-periodic objects such as nanoparticles, interfaces, defects, and macromolecules. The dual flood illumination eliminates charging effects that are generated when a conventional LEEM is used to image insulating specimens. A potential application for MAD-LEEM is in DNA sequencing, which requires high resolution to distinguish the individual bases and high speed to reduce the cost. The MAD-LEEM approach images the DNA with low electron impact energies, which provides nucleobase contrast mechanisms without organometallic labels. Furthermore, the micron-size field of view when combined with imaging on the fly provides long read lengths, thereby reducing the demand on assembling the sequence. Finally, experimental results from bulk specimens with immobilized single-base oligonucleotides demonstrate that base specific contrast is available with reflected, photo-emitted, and Auger electrons. Image contrast simulations of model rectangular features mimicking the individual nucleotides in a DNA strand have been developed to translate measurements of contrast on bulk DNA to the detectability of individual DNA bases in a sequence.

47 OTHER INSTRUMENTATION↗

Effects of Te inclusions on the performance of CdZnTe radiation detectors

Te inclusions existing at high concentrations in CdZnTe (CZT) material can degrade the performance of CZT detectors. These microscopic defects trap the free electrons generated by incident radiation, so entailing significant fluctuations in the total collected charge and thereby strongly affecting the energy resolution of thick (long-drift) detectors. Such effects were demonstrated in thin planar detectors, and, in many cases, they proved to be the dominant cause of the low performance of thick detectors, wherein the fluctuations in the charge losses accumulate along the charge's drift path. We continued studying this effect using different tools and techniques. We employed a dedicated beamline recently established at BNL's National Synchrotron Light Source for characterizing semiconductor radiation detectors, along with an IR transmission microscope system, the combination of which allowed us to correlate the concentration of defects with the devices performances. We present here our new results from testing over 50 CZT samples grown by different techniques. Our goals are to establish tolerable limits on the size and concentrations of these detrimental Te inclusions in CZT material, and to provide feedback to crystal growers to reduce their numbers in the material.

43 PARTICLE ACCELERATORS↗

Low energy Xe milling for the quantitative profiling of active dopants by off-axis electron holography

Off-axis electron holography is a powerful technique that can be used to measure the active dopants in semiconductors. The preparation of thin transmission electron microscopy specimens containing nm-scale regions of interest is extremely challenging and as a consequence ion milling is an essential tool. The exposure of doped specimens to energetic ions creates defects deep in the specimens that trap the active dopants, being the principle cause of what is known as the inactive region. The inactive thickness leads to an underestimation of the dopant potential in the specimens. Here we show that this artifact can be significantly reduced from 140 nm for specimens prepared using only Ga ions at 30 kV to only 10 nm by preparing specimens using 1.5 keV Xe ions for specimens containing p-n junctions with dopant concentrations of 2 x 10{sup 18} cm{sup -3}.

36 MATERIALS SCIENCE↗

Performance of Compact Pulsed Thermal Imaging System for In-Service Applications. Pulsed thermal tomography nondestructive examination of additively manufactured reactor materials and components

Additive manufacturing (AM) is an emerging method for cost-efficient fabrication of complex topology nuclear reactor parts from high-strength corrosion resistance alloys, such as stainless steel and Inconel. AM of metallic structures for nuclear energy applications is currently based on laser powder bed fusion (LPBF) process, which has the capability of melting metallic powder and net shaping the structures with relatively high precision. Some of the challenges with using LPBF method for nuclear manufacturing include the possibility of introducing pores into metallic structures. Integrity of AM structures needs to be evaluated nondestructively because material flaws could lead to premature failures due to creep in high temperature nuclear reactor environment. Currently, there exist limited capabilities to evaluate actual AM structures nondestructively. Pulsed Thermography (PT) imaging provides a capability for non-destructive evaluation (NDE) of sub-surface defects in arbitrary size structures. The PT method is based on recording material surface temperature transients with infrared (IR) camera following thermal pulse delivered on material surface with flash light. The PT method has advantages for NDE of actual AM structures because the method involves one-sided non-contact measurements and fast processing of large sample areas captured in one image. The data cube of PT measurements consists of surface temperature taken at sequential time intervals T(x,y,t). Material defects can be detected either by analyzing the thermograms T(x,y,t) data cube, or by using thermal tomography (TT) algorithm to obtain 3D spatial reconstruction of thermal effusivity e(x,y,z). To reduce the cost and enable in-service NDE in spatially constrained environment, it is highly desirable to develop PT with compact and inexpensive IR camera. Following initial qualification of an AM component for deployment in a nuclear reactor, a compact PT system can also be used for in-service nondestructive evaluation (NDE) applications. However, data cube obtained with PT based on compact IR camera suffers from strong thermal noises and loss of features due to relatively low sampling rate. In this report we describe two unsupervised machine learning (ML) algorithms for enhancement of PT images obtained with compact IR camera. In one approach, we introduce Sparse Coding Discrete Cosine Transform (SC/DCT) algorithm to remove additive white Gaussian noise (AWGN) from spatial thermal effusivity reconstructions. In another approach we introduce a Spatial Temporal Denoised Thermal Source Separation (STDTSS) ML algorithm to process thermograms. The STDTSS algorithm consists of spatial and temporal denoising using Gaussian and Savitzky–Golay filtering, followed by the matrix decomposition using Principal Component Analysis (PCA), and Independent Component Analysis (ICA) to automatically detect flaws. In the work described in this report, we constructed a compact PT system using a relatively small and low-cost FLIR A65 camera, consisting on uncooled microbolometer detector. Performance of SC/DCT algorithm was demonstrated on enhancing TT images of Inconel 718 AM plate. Performance of the STDTSS methods was investigated using thermography data obtained from imaging stainless steel 316L specimens produced with LPBF method with imprinted calibrated porosity defects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Defect-engineered monolayer MoS 2 with enhanced memristive and synaptic functionality for neuromorphic computing

Two-dimensional transition metal dichalcogenides (TMDs)-based memristors are promising candidates for realizing artificial synapses in next-generation computing. However, practical implementation faces several challenges, such as high non-linearity and asymmetry in synaptic weight updates, limited dynamic range, and cycle-to-cycle variability. Here, utilizing optimal-power argon plasma treatment, we significantly enhance the performance matrix of memristors fabricated from monolayer MoS 2 . Our approach not only improves linearity and symmetry in synaptic weight updates but also increases the number of available synaptic weight updates and enhances Spike-Time Dependent Plasticity. Notably, it broadens the switching ratio by two orders, minimizes cycle-to-cycle variability, reduces non-linear factors, and achieves an energy consumption of ~30 fJ per synaptic event. Implementation of these enhancements is demonstrated through Artificial Neural Network simulations, yielding a learning accuracy of ~97% on the MNIST hand-written digits dataset. Our findings underscore the significance of defect engineering as a powerful tool in advancing the synaptic functionality of memristors.

97 MATHEMATICS AND COMPUTING↗

mTOR is necessary for proper satellite cell activity and skeletal muscle regeneration

The serine/threonine kinase mammalian target of rapamycin (mTOR) is a key regulator of protein synthesis, cell proliferation and energy metabolism. As constitutive deletion of Mtor gene results in embryonic lethality, the function of mTOR in muscle stem cells (satellite cells) and skeletal muscle regeneration remains to be determined. In this study, we established a satellite cell specific Mtor conditional knockout (cKO) mouse model by crossing Pax7{sup CreER} and Mtor{sup flox/flox} mice. Skeletal muscle regeneration after injury was severely compromised in the absence of Mtor, indicated by increased number of necrotic myofibers infiltrated by Evans blue dye, and reduced number and size of regenerated myofibers in the Mtor cKO mice compared to wild type (WT) littermates. To dissect the cellular mechanism, we analyzed satellite cell-derived primary myoblasts grown on single myofibers or adhered to culture plates. The Mtor cKO myoblasts exhibited defective proliferation and differentiation kinetics when compared to myoblasts derived from WT littermates. At the mRNA and protein levels, the Mtor cKO myoblasts expressed lower levels of key myogenic determinant genes Pax7, Myf5, Myod, Myog than did the WT myoblasts. These results suggest that mTOR is essential for satellite cell function and skeletal muscle regeneration through controlling the expression of myogenic genes. - Highlights: • Pax7{sup CreER} was used to delete Mtor gene in satellite cells. • Satellite cell specific deletion of Mtor impairs muscle regeneration. • mTOR is necessary for satellite cell proliferation and differentiation. • Deletion of Mtor leads to reduced expression of key myogenic genes.

60 APPLIED LIFE SCIENCES↗

Enhancement of band-to-band tunneling in mono-layer transition metal dichalcogenides two-dimensional materials by vacancy defects

The band-to-band tunneling of monolayer transition metal dichalcogenides nano-junction is investigated using atomistic ab initio quantum transport simulations. From the simulation, it is found that the transition metal vacancy defect in the two-dimensional MX{sub 2} (M = Mo,W; X = S,Se) band-to-band tunneling diode can dramatically boost the on-state current up to 10 times while maintaining the device sub-threshold swing. The performance enhancement mechanism is discussed in detail by examining partial density of states of the system. It is found that the transition metal vacancy induces band-gap states, which reduce the effective length of the tunneling transition region.

36 MATERIALS SCIENCE↗

Ge{sub 1-y}Sn{sub y} (y = 0.01-0.10) alloys on Ge-buffered Si: Synthesis, microstructure, and optical properties

Novel hydride chemistries are employed to deposit light-emitting Ge{sub 1-y}Sn{sub y} alloys with y ≤ 0.1 by Ultra-High Vacuum Chemical Vapor Deposition (UHV-CVD) on Ge-buffered Si wafers. The properties of the resultant materials are systematically compared with similar alloys grown directly on Si wafers. The fundamental difference between the two systems is a fivefold (and higher) decrease in lattice mismatch between film and virtual substrate, allowing direct integration of bulk-like crystals with planar surfaces and relatively low dislocation densities. For y ≤ 0.06, the CVD precursors used were digermane Ge₂H₆ and deuterated stannane SnD₄. For y ≥ 0.06, the Ge precursor was changed to trigermane Ge₃H₈, whose higher reactivity enabled the fabrication of supersaturated samples with the target film parameters. In all cases, the Ge wafers were produced using tetragermane Ge₄H₁₀ as the Ge source. The photoluminescence intensity from Ge{sub 1–y}Sn{sub y}/Ge films is expected to increase relative to Ge{sub 1–y}Sn{sub y}/Si due to the less defected interface with the virtual substrate. However, while Ge{sub 1–y}Sn{sub y}/Si films are largely relaxed, a significant amount of compressive strain may be present in the Ge{sub 1–y}Sn{sub y}/Ge case. This compressive strain can reduce the emission intensity by increasing the separation between the direct and indirect edges. In this context, it is shown here that the proposed CVD approach to Ge{sub 1–y}Sn{sub y}/Ge makes it possible to approach film thicknesses of about 1 μm, for which the strain is mostly relaxed and the photoluminescence intensity increases by one order of magnitude relative to Ge{sub 1–y}Sn{sub y}/Si films. The observed strain relaxation is shown to be consistent with predictions from strain-relaxation models first developed for the Si{sub 1–x}Ge{sub x}/Si system. The defect structure and atomic distributions in the films are studied in detail using advanced electron-microscopy techniques, including aberration corrected STEM imaging and EELS mapping of the average diamond–cubic lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Fe concentration on the ion-irradiation induced defect evolution and hardening in Ni-Fe solid solution alloys

Understanding alloying effects on the irradiation response of structural materials is pivotal in nuclear engineering. In order to systematically explore the effects of Fe concentration on the irradiation-induced defect evolution and hardening in face-centered cubic Ni-Fe binary solid solution alloys, single crystalline Ni-xFe (x = 0–60 at%) alloys have been grown and irradiated with 1.5 MeV Ni ions. The irradiations have been performed over a wide range of fluences from 3 × 10 13 to 3 × 10 16 cm -2 at room temperature. Ion channeling technique has shown reduced damage accumulation with increasing Fe concentration in the low fluence regime, which is consistent to the results from molecular dynamic simulations. We did not observe any irradiation-induced compositional segregation in atom probe tomography within the detection limit, even in the samples irradiated with high fluence Ni ions. Transmission electron microscopy analyses have further demonstrated that the defect size significantly decreases with increasing Fe concentration, indicating a delay in defect evolution. Furthermore, irradiation induced hardening has been measured by nanoindentation tests. Ni and the Ni-Fe alloys have largely different initial hardness, but they all follow a similar trend for the increase of hardness as a function of irradiation fluence.

36 MATERIALS SCIENCE↗

Near surface defects: Cause of deficit between internal and external open-circuit voltage in solar cells

The presence of interface recombination in a complex multilayered thin-film solar structure causes a disparity between the internal open-circuit voltage (V OC,in ), measured by photoluminescence, and the external open-circuit voltage (V OC,ex ) i.e. an additional V OC deficit. Higher V OC,ex value aim require a comprehensive understanding of connection between V OC deficit and interface recombination. Here, a deep near-surface defect model at the absorber/buffer interface is developed for copper indium di-selenide solar cells grown under Cu excess conditions to explain the disparity between V OC ,in and V OC,ex . The model is based on experimental analysis of admittance spectroscopy and deep-level transient spectroscopy, which show the signature of deep acceptor defect. Further, temperature-dependent current-voltage measurements confirm the presence of near surface defects as the cause of interface recombination. The numerical simulations show strong decrease in the local V OC ,in near the absorber/buffer interface leading to a V OC deficit in the device. This loss mechanism leads to interface recombination without a reduced interface bandgap or Fermi level pinning. Further, these findings demonstrate that the V OC ,in measurements alone can be inconclusive and might conceal the information on interface recombination pathways, establishing the need for complementary techniques like temperature dependent current voltage measurements to identify the cause of interface recombination in the devices.

14 SOLAR ENERGY↗

Irradiation Enhances Strength and Deformability of Nano‐Architected Metallic Glass

The quest for radiation‐damage tolerant materials has found good candidates in nanoporous metals, whose abundance of free surfaces provides ample sinks for radiation‐induced defects, as well as in metallic glasses, whose characteristic failure via shear banding can be alleviated by irradiation. This type of catastrophic failure in metallic glass can also be suppressed by reducing their dimensions to the nanoscale. To combine the beneficial effects of resilience against irradiation in materials containing many free surfaces and nano‐sized metallic glasses, the authors fabricate Zr–Ni–Al metallic glass nano‐architecture and irradiate them with 12 MeV Ni 4+ ions. These 3D nanolattices are composed of hollow beams of sputtered metallic glass with beam wall thicknesses ≈10–100 nm, with a relative density of ≈5%, which renders them to be 20 times lighter than their bulk‐level counterparts. The authors find that the thickest‐walled nanolattices, those with a median wall thickness of ≈88 nm, are able to withstand irradiation without significant contraction; all other substantially shrunk; and collapsed upon irradiation. In situ nanomechanical experiments on the irradiated samples compressed inside a scanning electron microscope (SEM) reveal substantial improvement in mechanical response upon irradiation, with an average increase in yield strength of 35.7% and a significant enhancement in deformability. Enhanced deformability upon irradiation is apparent from the nanolattices' accommodation of larger strains before any kind of failure, as well as the presence of smaller strain bursts and stress drops throughout the stress–strain response. The irradiated nanolattices are largely intact after compression, with in situ SEM videos demonstrating a layer‐by‐layer like collapse in the irradiated nanolattices in contrast to the catastrophic failure with complete destruction of the failed layers observed in equivalent as‐fabricated samples. This work points to nano‐architected metallic glasses being a promising candidate for creating ultra‐lightweight, radiation tolerant materials, and irradiation as a promising technique for improving the mechanical response of metallic glass nanolattices with stiffness on the order of 250 MPa.

Thompson, Rachel L.↗

Emergence of exchange bias and giant coercive field enhancement by internal magnetic frustration in La 0.67 Sr 0.33 MnO 3 thin films

We have studied the influence of controlled defects on the magnetic properties of La 0.67 Sr 0.33 MnO 3 (LSMO) thin films. We used 100 nm thick epitaxial LSMO films, which were grown on SrTiO 3 substrates and introduced stoichiometry changes and defects using oxygen ion irradiation through nanoporous alumina masks. Oxygen irradiation through the mask creates cascades of defects in spatially-modulated regions in the plane of the LSMO film. The magnetic properties of the samples were compared before and after the irradiation. We have found that irradiation reduces the ferromagnetic ordering temperature, decreases the total magnetization, enhances the coercivity, and induces exchange bias below 50 K. The coercivity enhancement is dramatically higher below 50 K and can be associated with exchange bias. These results can be explained by the formation of Mn-rich antiferromagnetic or ferrimagnetic phases within the bombarded regions that are exchange coupled to the non-irradiated - ferromagnetic host.

36 MATERIALS SCIENCE↗