Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERCONDUCTING MAGNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Quench protection study of the updated MQXF for the LHC luminosity upgrade (HiLumi LHC)

In 2023, the LHC luminosity will be increased, aiming at reaching 3000 fb-1 integrated over ten years. To obtain this target, new Nb 3 Sn low-β quadrupoles (MQXF) have been designed for the interaction regions. These magnets present a very large aperture (150 mm, to be compared with the 70 mm of the present NbTi quadrupoles) and a very large stored energy density (120 MJ/m 3 ). For these reasons, quench protection is one of the most challenging aspects of the design of these magnets. In fact, protection studies of a previous design showed that the simulated hot spot temperature was very close to the maximum allowed limit of 350 K; this challenge motivated improvements in the current discharge modeling, taking into account the so-called dynamic effects on the apparent magnet inductance. Moreover, quench heaters design has been studied to be going into more details. In this study, a protection study of the updated MQXF is presented, benefiting from the experience gained by studying the previous design. As a result, a study of the voltages between turns in the magnet is also presented during both normal operation and most important failure scenarios.

43 PARTICLE ACCELERATORS↗

Insert Coil Test for HEP High Field Magnets Using YBCO Coated Conductor Tapes

The final beam cooling stages of a Muon Collider may require DC solenoid magnets with magnetic fields of 30-50 T. In this paper we present progress in insert coil development using commercially available YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} Coated Conductor. Technological aspects covered in the development, including coil geometry, insulation, manufacturing process and testing are summarized and discussed. Test results of double pancake coils operated in liquid nitrogen and liquid helium are presented and compared with the performance of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} tape short samples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic gates and guides for superconducting vortices

Here, we image the motion of superconducting vortices in niobium film covered with a regular array of thin permalloy stripes. By altering the magnetization orientation in the stripes using a small in-plane magnetic field, we can tune the strength of interactions between vortices and the stripe edges, enabling acceleration or retardation of the superconducting vortices in the sample and consequently introducing strong tunable anisotropy into the vortex dynamics. We discuss our observations in terms of the attraction/repulsion between point magnetic charges carried by vortices and lines of magnetic charges at the stripe edges, and derive analytical formulas for the vortex-magnetic stripes coupling. Our approach demonstrates the analogy between the vortex motion regulated by the magnetic stripe array and electric carrier flow in gated semiconducting devices. Scaling down the geometrical features of the proposed design may enable controlled manipulation of single vortices, paving the way for Abrikosov vortex microcircuits and memories.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-temperature phase diagram of the EuRbFe 4 As 4 superconductor

The pressure dependencies of the magnetic and superconducting transitions, as well as that of the superconducting upper critical eld are reported for single crystalline EuRbFe 4 As 4 . Resistance measurements were performed under hydrostatic pressures up to 6.21 GPa and in magnetic elds up to 9 T. Zero- eld-cool magnetization measurements were performed under hydrostatic pressures up to 1.24 GPa under 20 mT applied eld. Superconducting transition temperature, T c , up to 6.21 GPa and magnetic transition temperature, T M , up to 1.24 GPa were obtained and a pressure-temperature phase diagram was constructed. Our results show that Tc is monotonically suppressed upon increasing pressure. T M is linearly increased up to 1.24 GPa. For the studied pressure range, no signs of the crossing of T M and T c lines are observed. The normalized slope of the superconducting upper critical eld is gradually suppressed with increasing pressure, which may be due to the continuous change of Fermi-velocity v F with pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-healing patterns in ferromagnetic-superconducting hybrids

We study magnetic flux dynamic effects in a superconducting bridge with thin soft magnetic stripes placed either on top or under the bridge. Voltage-current (VI) measurements reveal that the edges of magnetic stripes oriented transvers or along the bridge introduce channels or barriers for vortex motion, resulting in the decrease or increase of the critical current, respectively. We demonstrate a remarkable self-healing effect whereby the magnetic pinning strength for the longitudinal stripes increases with current. The self-field of the current polarizes the magnetic stripes along their width, which enhances the stray fields at their edges and creates a dynamic vortex pinning landscape to impede vortex flow. Our results highlight new strategies to engineer adaptive pinning topologies in superconducting-ferromagnetic hybrids.

Vlasko-Vlasov, V. K.↗

Spin-glass state in nickelate superconductors

Magneto-optical measurements in La 0.8 Sr 0.2 NiO 2 and Nd 0.825 Sr 0.175 NiO 2 reveal an intriguing new facet of infinite-layer nickelate superconductors: the onset of spin-glass behavior at a temperature far exceeding the superconducting critical temperature T c . This discovery sharply contrasts with copper oxide superconductors, where magnetism and superconductivity remain largely exclusive. Moreover, the magnitude and onset temperature of the polar Kerr effect in Nd 0.825 Sr 0.175 NiO 2 fabricated on SrTiO 3 and (LaAlO 3 ) 0.3 (Sr 2 TaAlO 6 ) 0.7 substrates differ dramatically, while T c does not.

FOS: Physical sciences↗

Design and Fabrication of the Mu2e Cryogenic Distribution System

The muon-to-electron conversion (Mu2e) experiment at Fermilab will be used to search for the charged lepton flavor-violating conversion of muons to electrons in the field of an atomic nucleus. The Mu2e experiment is currently in the design and construction stage and is expected to begin operations in 2022. The Mu2e experiment uses four large superconducting solenoid magnets including a Production Solenoid (PS), an Upstream and Downstream Transport Solenoid (TSu and TSd) and a Detector Solenoid (DS). This paper will focus on the cryogenic distribution system for these four solenoid magnets. Liquid helium will be supplied from two re-purposed Tevatron satellite refrigerators. A large cryogenic distribution box (DB) is located in the Mu2e building to distribute the required cryogens to each of the four solenoid magnets. Each solenoid magnet will have a dedicated transfer line and cryogenic feed box (FB). The solenoid magnets each require two liquid helium circuits and two liquid nitrogen circuits. The most unique feature about this cryogenic system is that the assemblies for the start of the superconducting portion of the power leads are mounted in feed boxes that are in the range of 23 m to 31 m away from the solenoid magnets. The cryogenic feed boxes are located remotely to provide protection from radiation damage and high magnetic fields. The power leads are NbTi superconducting cable stabilized with high conductivity aluminum. The 6061-T6 aluminum grade was selected for the transfer line piping so that the piping would thermally contract at the same rate as the power lead. A major concern for this transfer line is that a small helium leak could create an electric discharge arc due to the Paschen effect. This paper includes a description of the design features and testing done to ensure that the power leads are protected from the Paschen effect while still being adequately cooled to liquid helium temperatures.

43 PARTICLE ACCELERATORS↗

Irreversibility in Rolled Tantalum

We investigated the magnetic and thermodynamic properties of rolled tantalum in superconducting state. The magnetization shows a crossover from type I to type II superconductivity as the magnetic field increases beyond the thermodynamic critical field. In both regimes, the sample shows a substantial irreversibility of the magnetization which we attribute to the pinning of the entities that characterize the intermediate and mixed states. Magnetic relaxation data taken in the intermediate state shows an important contribution of the quantum tunnelling below 3.7 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excess-iron driven spin glass phase in Fe 1 + y Te 1 – x Se x

The iron-chalcogenide superconductor FeTe 1– x Se x displays a variety of exotic features distinct from iron pnictides. Although much effort has been devoted to understanding the interplay between magnetism and superconductivity near x = 0.5, the existence of a spin glass phase with short-range magnetic order in the doping range ( x ~ 0.1–0.3) has rarely been studied. Here, we use DC/AC magnetization and (quasi) elastic neutron scattering to confirm the spin-glass nature of the short-range magnetic order in a Fe 1.07 Te 0.8 Se 0.2 sample. The AC-frequency dependent spin-freezing temperature T f generates a frequency sensitivity Δ T f ( ω )/[ T f ( ω )Δlog 10 ω ] ≈ 0.028 and the description of the critical slowing down with τ = τ 0 ( T f / T SG – 1) - z v gives T SG ≈ 22 K and zv ≈ 10, comparable to that of a classical spin-glass system. We have also extended the frequency-dependent T f to the smaller time scale using energy-resolution-dependent neutron diffraction measurements, in which the T N of the short-range magnetic order increases systematically with increasing energy resolution. We find that by removing the excess iron through annealing in oxygen, the spin-freezing behavior disappears, and bulk superconductivity is realized. Thus, the excess Fe is the driving force for the formation of the spin-glass phase detrimental to bulk superconductivity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum oscillations in strong magnetic fields, berry phase, and superconductivity in three-dimensional topological Bi{sub 2–x}Cu{sub x}Se{sub 3} insulators

Two-dimensional (2D) Shubnikov–de Haas oscillations and 2D Hall oscillations are observed in 3D copper-doped Bi{sub 2}Se{sub 3} single crystals in magnetic fields up to 19.5 T at temperatures down to 0.3 K. Three samples with a high bulk carrier concentration (n ≈ 10{sup 19}–10{sup 20} cm{sup –3}) are studied. The rotation of the samples in a magnetic field shows that these oscillations are related to numerous parallel 2D conducting channels 1–5 nm thick. Their basic kinetic parameters are found. Quantized Hall resistance R{sub xy} is detected in 1-nm-thick 2D conducting channels at high fields. The distance Δ(1/R{sub xy}) between the steps in the field dependence of 1/R{sub xy} is found to be constant for different Landau levels, 1.3e{sup 2}/h per 1-nm-thick layer. The constructed fan diagrams of 2D Landau levels for various angles of sample inclination with respect to the magnetic field direction allowed us to conclude that the Berry phase in the 2D conducting channels is γ ≈ π and independent of the magnetic field direction. When studying the angular dependence of upper resistive critical magnetic field H{sub c2} in one of the superconducting samples, we showed that it can be considered as a bulk superconductor consisting of superconducting layers with an effective thickness of about 50 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interlayer pairing in bilayer nickelates

The discovery of T c ~ 80 K superconductivity in pressurized La 3 Ni 2 O 7 has launched a new platform to study high-temperature superconductivity. Using non-perturbative dynamic cluster approximation quantum Monte Carlo calculations, we characterize the magnetic and superconducting pairing behavior of a realistic bilayer two-orbital Hubbard-Hund model of this system that describes the relevant Ni e g states with physically relevant interaction strengths. We find a leading s ± superconducting instability in this model at a temperature T ~ 100 K close to the experimentally observed T c . Analyzing the orbital and spatial structure of the effective pairing interaction giving rise to this state reveals that the interaction predominantly acts between local interlayer pairs of the $d_{3z^2-r^2}$ orbital. By correlating the strength of the interaction with that of the magnetic spin fluctuations we show that it is driven by strong interlayer spin-fluctuations arising from the $d_{3z^2-r^2}$ orbital. These results provide first-time non-perturbative evidence supporting the picture that a simple single-orbital bilayer Hubbard model for the Ni $d_{3z^2-r^2}$ orbital provides an excellent low-energy effective description of the superconducting behavior of La 3 Ni 2 O 7 .

Maier, Thomas A. [Oak Ridge National Laboratory (O↗

Tuning the Pairing Interaction in a d -Wave Superconductor by Paramagnons Injected through Interfaces

Unconventional superconductivity and magnetism are intertwined on a microscopic level in a wide class of materials. A new approach to this most fundamental and hotly debated issue focuses on the role of interactions between superconducting electrons and bosonic fluctuations at the interface between adjacent layers in heterostructures. In this paper, we fabricate hybrid superlattices consisting of alternating atomic layers of the heavy-fermion superconductor ${\mathrm{CeCoIn}}_{5}$ and antiferromagnetic (AFM) metal ${\mathrm{CeRhIn}}_{5}$, in which the AFM order can be suppressed by applying pressure. We find that the superconducting and AFM states coexist in spatially separated layers, but their mutual coupling via the interface significantly modifies the superconducting properties. An analysis of upper critical fields reveals that, upon suppressing the AFM order by applied pressure, the force binding superconducting electron pairs acquires an extreme strong-coupling nature. Finally, this demonstrates that superconducting pairing can be tuned nontrivially by magnetic fluctuations (paramagnons) injected through the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local Atomic Configuration Control of Superconductivity in the Undoped Pnictide Parent Compound BaFe 2 As 2

Emergent superconductivity is strongly correlated with the symmetry of local atomic configuration in the parent compounds of iron-based superconductors. While chemical doping or hydrostatic pressure can change the local geometry, conventional approaches do not provide a clear pathway in predictably tuning the detailed atomic arrangement due to the parent compound’s complicated structural deformation in the presence of the tetragonal-to-orthorhombic phase transition. Here, we demonstrate a systematic approach to manipulate local structural configurations in BaFe 2 As 2 epitaxial thin films by controlling two independent structural factors, orthorhombicity (in-plane anisotropy) and tetragonality (out-of-plane/in-plane balance), from lattice parameters. We tune superconductivity without doping utilizing both structural factors separately and controlling local tetrahedral coordination in the designed thin film heterostructures with substrate clamping and biaxial strain. We further show this allows quantitative control of the structural phase transition, the associated magnetism, and superconductivity in parent material BaFe 2 As 2 . Furthermore, this approach will advance the development of tunable thin film superconductors in a reduced dimension.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The 11 T dipole for HL-LHC: Status and plan

The upgrade of the Large Hadron Collider (LHC) collimation system includes additional collimators in the LHC lattice. The longitudinal space for these collimators will be created by replacing some of the LHC main dipoles with shorter but stronger dipoles compatible with the LHC lattice and main systems. The project plan comprises the construction of two cryoassemblies containing each of the two 11-T dipoles of 5.5-m length for possible installation on either side of interaction point 2 of LHC in the years 2018-2019 for ion operation, and the installation of two cryoassemblies on either side of interaction point 7 of LHC in the years 2023-2024 for proton operation. The development program conducted in conjunction between the Fermilab and CERN magnet groups is progressing well. The development activities carried out on the side of Fermilab were concluded in the middle of 2015 with the fabrication and test of a 1-m-long two-in-one model and those on the CERN side are ramping up with the construction of 2-m-long models and the preparation of the tooling for the fabrication of the first full-length prototype. The engineering design of the cryomagnet is well advanced, including the definition of the various interfaces, e.g., with the collimator, powering, protection, and vacuum systems. Several practice coils of 5.5-m length have been already fabricated. This paper describes the overall progress of the project, the final design of the cryomagnet, and the performance of the most recent models. Furthermore, the overall plan toward the fabrication of the series magnets for the two phases of the upgrade of the LHC collimation system is also presented.

43 PARTICLE ACCELERATORS↗

WE-G-17A-08: Electron Gun Operation for in Line MRI-Linac Configurations: An Assessment of Beam Fidelity and Recovery Techniques for Different SIDs and Magnetic Field Strengths

Purpose: To test the functionality of medical electron guns within the fringe field of a purpose built superconducting MRI magnet, and to test different recovery techniques for a variety of imaging field strengths and SIDs. Methods: Three different electron guns were simulated using Finite Element Modelling; a standard diode gun, a standard triode gun, and a novel diode gun designed to operate within parallel magnetic fields. The approximate working regime of each gun was established by assessing exit current in constant magnetic fields of varying strength and defining ‘working’ as less than 10% change in injection current. Next, the 1.0T MRI magnet was simulated within Comsol Multiphysics. The coil currents in this model were also scaled to produce field strengths of .5, 1, 1.5 and 3T. Various magnetic shield configurations were simulated, varying the SID from 800 to 1300mm. The average magnetic field within the gun region was assessed together with the distortion in the imaging volume - greater than 150uT distortion was considered unacceptable. Results: The conventional guns functioned in fields of less than 7.5mT. Conversely, the redesigned diode required fields greater than .1T to function correctly. Magnetic shielding was feasible for SIDS of greater than 1000mm for field strengths of .5T and 1T, and 1100mm for 1.5 and 3.0T. Beyond these limits shielding resulted in unacceptable MRI distortion. In contrast, the redesigned diode could perform acceptably for SIDs of less than 812, 896, 931, and 974mm for imaging strengths of 0.5, 1.0, 1.5, 3.0T. Conclusions: For in-line MRIlinac configurations where the electron gun is operating in low field regions, shielding is a straight forward option. However, as magnetic field strength increases and the SID is reduced, shielding results in too great a distortion in the MRI and redesigning the electron optics is the preferable solution. The authors would like to acknowledge funding from the National Health and Research Council (AUS), National Institute of Health (NIH), and Cancer Institute NSW.

43 PARTICLE ACCELERATORS↗