Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Mapping Turbulent Flow around a Rod Bundle Induced by a 5 x 5 PWR Mixing Vane Grid using Particle Tracking Velocimetry

This study presents an experimental visualization technique developed for the measurement of the lateral liquid velocity components within a vertical up-flow 5 x 5 rod bundle. The experimental technique uses refractive index matching (RIM) and time resolved particle tracking velocimetry (PTV) to obtain full field measurements at different axial locations. Relevant features of the technique are first, the multi-scale capability, which allows measurements either on a single subchannel or measurements to include the full bundle accounting for the 25 rods and corresponding liquid subchannels. Secondly, the use of FEP tubes to match the refractive index of water allows a uniform illumination which in turn reduces the velocity measurements uncertainty, and third, the use of a high energy continuous laser allows for the temporal evaluation of fluctuating structures within the bundle. This study was conducted with the aim to quantify the effect of the mixing vanes on the development of the liquid turbulence and to test the motivation feasibility of the technique to serve as a benchmark for advanced CFD simulations. In this context, there have been multiple experimental studies with the objective to improve the database for CFD benchmarking purposes. Several experimental techniques have been used to this end; for instance, laser doppler velocimetry (LDV) is a preferred tool to measure the axial and lateral velocity components through bundles due to its accuracy. Although LDV is a mature technique, it only provides point measurements which do not allow for the instantaneous investigation of the momentum exchange among neighboring subchannels; moreover, the small spaces between the rods and within the subchannels makes LDV measurements difficult. In the other hand, flow visualization techniques can provide a 2D map of the instantaneous and average structure of the liquid velocity. Among the used visualization techniques, PIV has gained a lot of attention due to its high accuracy, relative simple application, and non-intrusiveness. Several studies had applied PIV to study the flow structures within bundles sub-channels with some success; however, in these studies there exist an increased uncertainty due to reflections and shadows from the rods. Shadows and undesired reflections appear when the light passes through materials with different refractive indexes. This issue was addressed in other studies on which the refractive index of the rod bundle (or sections of it) was matched with that of water. These studies used particle tracking velocimetry (PTV) and obtained comparable results with LDV measurements. This success indicated that RIM-PTV experiments can be successfully implemented to gather information for simulation benchmarking. The present work is an extension of previous efforts on which measurements were performed only on vertical planes but lacked of the important flow structures that can only be observed through a horizontal cross section of the bundle at different axial height. The focus of the present study was to fill this information gap by measuring the lateral velocity in horizontal planes at different heights. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Adaptively remeshed multiphysical modeling of resistance forge welding with experimental validation of residual stress fields and measurement processes

Welding processes used in the production of pressure vessels impart residual stresses in the manufactured component. Computational modeling is critical to predicting these residual stress fields and understanding how they interact with notches and flaws to impact pressure vessel durability. Here, in this work, we present a finite element model for a resistance forge weld and validate it using laboratory measurements. Extensive microstructural changes, near-melt temperatures, and large localized deformations along the weld interface pose significant challenges to Lagrangian finite element modeling. The proposed modeling approach overcomes these roadblocks in order to provide a high-fidelity simulation that can predict the residual stress state in the manufactured pressure vessel; a rich microstructural constitutive model accounts for material recrystallization dynamics, a frictional-to-tied contact model is coordinated with the constitutive model to represent interfacial bonding, and adaptive remeshing is employed to alleviate severe mesh distortion. An interrupted-weld approach is applied to the simulation to facilitate comparison to displacement measures. Several techniques are employed for residual stress measurement in order to validate the finite element model: neutron diffraction, the contour method, and the slitting method. Model-measurement comparisons are supplemented with detailed simulations that reflect the configurations of the residual-stress measurement processes themselves. The model results show general agreement with experimental measurements, and we observe some similarities in the features around the weld region. Factors that contribute to model-measurement differences are identified. Finally, we conclude with some discussion of the model development and residual stress measurement strategies, including how to best leverage the efforts put forth here for other weld problems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thin‐Film Ferroelectrics

Abstract Over the last 30 years, the study of ferroelectric oxides has been revolutionized by the implementation of epitaxial‐thin‐film‐based studies, which have driven many advances in the understanding of ferroelectric physics and the realization of novel polar structures and functionalities. New questions have motivated the development of advanced synthesis, characterization, and simulations of epitaxial thin films and, in turn, have provided new insights and applications across the micro‐, meso‐, and macroscopic length scales. This review traces the evolution of ferroelectric thin‐film research through the early days developing understanding of the roles of size and strain on ferroelectrics to the present day, where such understanding is used to create complex hierarchical domain structures, novel polar topologies, and controlled chemical and defect profiles. The extension of epitaxial techniques, coupled with advances in high‐throughput simulations, now stands to accelerate the discovery and study of new ferroelectric materials. Coming hand‐in‐hand with these new materials is new understanding and control of ferroelectric functionalities. Today, researchers are actively working to apply these lessons in a number of applications, including novel memory and logic architectures, as well as a host of energy conversion devices.

Fernandez, Abel↗
DOE OSTI2025

Identification of tau leptons using a convolutional neural network with domain adaptation

A tau lepton identification algorithm,DeepTau, based on convolutional neural network techniques, has been developed in the CMS experiment to discriminate reconstructed hadronic decays of tau leptons (τ h ) from quark or gluon jets and electrons and muons that are misreconstructed as τ h candidates. The latest version of this algorithm, v2.5, includes domain adaptation by backpropagation, a technique that reduces discrepancies between collision data and simulation in the region with the highest purity of genuine τh candidates. Additionally, a refined training workflow improves classification performance with respect to the previous version of the algorithm, with a reduction of 30–50% in the probability for quark and gluon jets to be misidentified as τ h candidates for given reconstruction and identification efficiencies. This paper presents the novel improvements introduced in theDeepTau algorithm and evaluates its performance in LHC proton-proton collision data at √(s) = 13 and 13.6 TeV collected in 2018 and 2022 with integrated luminosities of 60 and 35 fb -1 , respectively. Techniques to calibrate the performance of the τ h identification algorithm in simulation with respect to its measured performance in real data are presented, together with a subset of results among those measured for use in CMS physics analyses.

Large detector-systems performance↗
DOE OSTI2023

Special Topic on High Performance Computing in Chemical Physics

Computational modeling and simulation have become indispensable scientific tools in virtually all areas of chemical, biomolecular, and materials systems research. Computation can provide unique and detailed atomic level information that is difficult or impossible to obtain through analytical theories and experimental investigations. In addition, recent advances in micro-electronics have resulted in computer architectures with unprecedented computational capabilities, from the largest supercomputers to common desktop computers. In conclusion, combined with the development of new computational domain science methodologies and novel programming models and techniques, this has resulted in modeling and simulation resources capable of providing results at or better than experimental chemical accuracy and for systems in increasingly realistic chemical environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Sensitivity of a Subject-specific Ankle Sprain Simulation to Extrinsic Versus Intrinsic Biomechanical Factors

Ankle sprains are the most common musculoskeletal injury in sport and military activity, despite existing prophylactic strategies. The purpose of this report was to develop a probabilistic simulation of lateral ankle sprains during single-limb drop landing, towards accelerating innovation in ankle sprain prevention. A deterministic, subject-specific musculoskeletal model was extended with automation and probabilistic distributions on sprain-related biomechanical factors. Probabilistic simulations were generated using traditional Monte Carlo techniques and the advanced mean value method, a more computationally-efficient approach. Predicted distributions of peak ankle joint rotations, velocities, and moments borne by supporting passive structures agreed favorably with the deterministic model and with reports of real sprain biomechanics. Parameter sensitivities identified that predictions were most strongly influenced by drop height, subtalar joint posture at contact, invertor/evertor co-activation, and passive ankle stiffness. The advanced mean value method predicted confidence bounds comparable to a 1000-trial Monte Carlo simulation, and required only 14 model evaluations and 4-min processing time. The extended probabilistic simulation may be useful to virtually test new prophylactic strategies for ankle sprains, and is made available for open-source use (https://simtk.org/projects/sprain-sim).

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Simulations of the Ion Current to a Probe in Plasma with Allowance for Ionization and Ion–Neutral Collisions: II. Cylindrical Probe

The ion current to a cylindrical probe is considered with allowance for volume ionization, ion–neutral collisions, and the ion orbital moment. A model based on the molecular dynamics method and applicable in a wide range of plasma parameters (r{sub p}/λ{sub D}= 0.01–100, r{sub i}/λ{sub D}= 0.002–200, ν{sub i}/ω{sub 0i}= 0.01–0.05, and T{sub i}/T{sub e} = 0−0.01) is proposed A convenient representation of the dependence of the relative ion current density on the Langmuir coefficient β{sup 2} and a technique for determining the plasma density from simulation results are offered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Progress on Understanding Rayleigh–Taylor Flow and Mixing Using Synergy Between Simulation, Modeling, and Experiment

Simultaneous advances in numerical methods and computing, theoretical techniques, and experimental diagnostics have all led independently to better understanding of Rayleigh–Taylor (RT) instability, turbulence, and mixing. In particular, experiments have provided significant motivation for many simulation and modeling studies, as well as validation data. Numerical simulations have also provided data that is not currently measurable or very difficult to measure accurately in RT unstable flows. Thus, simulations have also motivated new measurements in this class of buoyancy-driven flows. This overview discusses simulation and modeling studies synergistic with experiments and examples of how experiments have motivated simulations and models of RT instability, flow, and mixing. First, a brief summary of measured experimental and calculated simulation quantities, of experimental approaches, and of issues and challenges in the simulation and modeling of RT experiments is presented. Implicit large-eddy, direct numerical, and large-eddy simulations validated using RT experimental data are then discussed. This is followed by a discussion of modeling using analytical, modal, buoyancy–drag, and turbulent transport models of RT mixing experiments. The discussion will focus on three-dimensional RT mixing arising from multimode perturbations. Finally, this focused review concludes with a perspective on future simulation, modeling, and experimental directions for further research. Research in simulation and modeling of RT unstable flows, coupled with experiments, has made significant progress over the past several decades. This overview serves as an opportunity to both discuss progress and to stimulate future research on simulation and modeling of this unique class of hydrodynamically unstable turbulent flows.

42 ENGINEERING↗
DOE OSTI2020

Tailored Graphene Micropatterns by Wafer-Scale Direct Transfer for Flexible Chemical Sensor Platform

2D materials, such as graphene, exhibit great potential as functional materials for numerous novel applications due to their excellent properties. The grafting of conventional micropatterning techniques on new types of electronic devices is required to fully utilize the unique nature of graphene. However, the conventional lithography and polymer-supported transfer methods often induce the contamination and damage of the graphene surface due to polymer residues and harsh wet-transfer conditions. In this work, a novel strategy to obtain micropatterned graphene on polymer substrates using a direct curing process is demonstrated. Employing this method, entirely flexible, transparent, well-defined self-activated graphene sensor arrays, capable of gas discrimination without external heating, are fabricated on 4 in. wafer-scale substrates. Finite element method simulations show the potential of this patterning technique to maximize the performance of the sensor devices when the active channels of the 2D material are suspended and nanoscaled. This study contributes considerably to the development of flexible functional electronic devices based on 2D materials.

2D materials, Graphene, Microscale patterning, Che↗
DOE OSTI2016

Mirrored continuum and molecular scale simulations of the ignition of high-pressure phases of RDX

We present a mirrored atomistic and continuum framework that is used to describe the ignition of energetic materials, and a high-pressure phase of RDX in particular. The continuum formulation uses meaningful averages of thermodynamic properties obtained from the atomistic simulation and a simplification of enormously complex reaction kinetics. In particular, components are identified based on molecular weight bin averages and our methodology assumes that both the averaged atomistic and continuum simulations are represented on the same time and length scales. The atomistic simulations of thermally initiated ignition of RDX are performed using reactive molecular dynamics (RMD). The continuum model is based on multi-component thermodynamics and uses a kinetics scheme that describes observed chemical changes of the averaged atomistic simulations. Thus the mirrored continuum simulations mimic the rapid change in pressure, temperature, and average molecular weight of species in the reactive mixture. This mirroring enables a new technique to simplify the chemistry obtained from reactive MD simulations while retaining the observed features and spatial and temporal scales from both the RMD and continuum model. The primary benefit of this approach is a potentially powerful, but familiar way to interpret the atomistic simulations and understand the chemical events and reaction rates. The approach is quite general and thus can provide a way to model chemistry based on atomistic simulations and extend the reach of those simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Domain Adaptive Graph Neural Networks for Constraining Cosmological Parameters Across Multiple Data Sets

State of the art astronomical simulations have provided datasets which enabled the training of novel deep learning techniques for constraining cosmological parameters. However, differences in subgrid physics implementation and numerical approximations among simulation suites lead to differences in simulated datasets, which pose a hard challenge when trying to generalize across diverse data domains and ultimately when applying models to observational data. Recent work reveals deep learning algorithms are able to extract more information from complex cosmological simulations than summary statistics like power spectra. We introduce Domain Adaptive Graph Neural Networks (DA-GNNs), trained on CAMELS data, inspired by CosmoGraphNet (Villanueva-Domingo et al 2023). By utilizing GNNs, we can capitalize on their capacity to capture both astrophysical and topological features of galaxy distributions. Mixing these capabilities with domain adaptation techniques such as Maximum Mean Discrepancy (MMD), which enable extraction of domain-invariant features, our framework demonstrates enhanced accuracy and robustness. We present experimental results, including the alignment of distributions across domains through data visualization. These findings suggest that DA-GNNs are an efficient way of extracting domain independent cosmological information, a vital step toward robust deep learning for real cosmic survey data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

SU-E-J-186: Acquiring and Assessing Upright CBCT Images for Future Treatment Planning

Purpose: To acquire upright CBCT images using the onboard imager of a Varian TrueBeam. An easy to implement upright imaging protocol could allow for widespread upright radiation therapy which would greatly benefit certain patients. These include thoracic cancer patients (because lung volume increases in a seated position) and patients who experience substantial discomfort during supine treatment. Methods: To acquire upright CBCT images, the gantry head remained stationary at 0 degrees with the KV imager arms extended to their lateral positions. Phantoms were placed upright at the end of the treatment couch. During a scan, the couch rotated from 270 to 90 degrees while continuous fluoroscopic projections were taken by the onboard imager. To extend the field-of-view, this sequence was performed twice: once with the KV detector longitudinally offset +14.5cm and once with it longitudinally offset −14.5cm. The resulting two image sets were stitched together before reconstruction. The imaging beam parameters were chosen to deliver a dose similar to that given during a simulation CT. Image quality was evaluated for spatial linearity, high and low contrast resolution, and HU linearity using CatPhan and anthropomorphic phantoms. A deformable registration technique was used to evaluate HU mapping from a simulation CT. Results: Spatial linearity and high contrast resolution were maintained in upright CBCT when compared to simulation CT. However, low contrast resolution and HU linearity degraded. Streak artifacts were caused by the limited 180 degree arc of the couch, and the stitching process created a sharp artifact at the center of the reconstruction. The deformable registration was robust in the HU mapping even with these artifacts and the loss of HU linearity. Conclusions: The image quality obtained from upright CBCT was sufficient for treatment planning. The success of this novel technique is an important step towards a future clinical protocol. This project was funded in part by Varian Medical Systems, Inc.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Simulations of multi-contrast x-ray imaging using near-field speckles

X-ray dark-field and phase-contrast imaging using near-field speckles is a novel technique that overcomes limitations inherent in conventional absorption x-ray imaging, i.e. poor contrast for features with similar density. Speckle-based imaging yields a wealth of information with a simple setup tolerant to polychromatic and divergent beams, and simple data acquisition and analysis procedures. Here, we present a simulation software used to model the image formation with the speckle-based technique, and we compare simulated results on a phantom sample with experimental synchrotron data. Thorough simulation of a speckle-based imaging experiment will help for better understanding and optimising the technique itself.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Effect of Sulfonation Level on the Percolated Morphology and Proton Conductivity of Hydrated Fluorine-Free Copolymers: Experiments and Simulations

Using all-atom molecular dynamics simulations and a variety of experimental methods, we previously reported on a linear polyethylene with pendant phenyl sulfonated groups precisely on every fifth carbon along the backbone. With increasing relative humidity this fluorine-free polymer self-assembled to form nanoscale water channels and exhibited exceptional proton conductivity. Expanding upon those findings, here we explore partially sulfonated random copolymers, referred to as p 5PhSH-Y. Using either acetyl sulfate or sulfuric acid, a wide range of sulfonation levels were prepared ( Y = 34−98%) corresponding to ion-exchange capacities (IEC) of 2.0−4.4 mmol/g. Combining experimental techniques and all-atom molecular dynamics simulations, we study the effect of Y on water uptake, nanoscale morphology, and the proton/water transport properties of p5PhSH- Y . The proton conductivity of p 5PhSH- Y increases with relative humidity and with Y and achieves values in excess of 0.1 S/cm. These high conductivities are attributed to high IEC and welldeveloped nanoscale percolated hydrophilic domains made possible by the flexible backbone. We quantitatively describe the nature of the water channels using the characteristic distance, channel width distribution, the area per sulfonate group at the hydrophilic/ hydrophobic interface, and the fractal dimension. Notably, the channel widths and the areas per sulfonate group are nominally independent of the level of sulfonation, while depending significantly on the level of hydration. The fractal dimension of the water channels correlates strongly with the water diffusion coefficients calculated from the molecular dynamics (MD) simulations. These findings demonstrate that the p 5PhSH- Y hydrocarbon copolymers can be modified to tune properties, particularly proton conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A matrix-free hyperviscosity formulation for high-order ALE hydrodynamics

The numerical approximation of compressible hydrodynamics is at the core of high-energy density (HED) multiphysics simulations as shocks are the driving force in experiments like inertial confinement fusion (ICF). In this work, we describe our extension of the hyperviscosity technique, originally developed for shock treatment in finite difference simulations, for use in arbitrarily high-order finite element methods for Lagrangian hydrodynamics. Hyperviscosity enables shock capturing while preserving the high-order properties of the underlying discretization away from the shock region. Specifically, we compute a high-order term based on a product of the mesh length scale to a high power scaled by a hyper-Laplacian operator applied to a scalar field. We then form the total artificial viscosity by taking a non-linear blend of this term and a traditional artificial viscosity term. We also present a matrix-free formulation for computing the finite element based hyper-Laplacian operator. Such matrix-free methods have superior performance characteristics compared to traditional full matrix assembly approaches and offer advantages for GPU based HPC hardware. We demonstrate the numerical convergence of our method and its application to complex, multi-material ALE simulations on high-order (curved) meshes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Space-filling designs for computer experiments: A review

Improving the quality of a product/process using a computer simulator is a much less expensive option than the real physical testing. However, simulation using computationally intensive computer models can be time consuming and therefore, directly doing the optimization on the computer simulator can be infeasible. Experimental design and statistical modeling techniques can be used for overcoming this problem. This article reviews experimental designs known as space-filling designs that are suitable for computer simulations. In the review, a special emphasis is given for a recently developed space-filling design called maximum projection design. Furthermore, its advantages are illustrated using a simulation conducted for optimizing a milling process.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

Monte Carlo simulation of PET and SPECT imaging of {sup 90}Y

Purpose: Yittrium-90 ({sup 90}Y) is traditionally thought of as a pure beta emitter, and is used in targeted radionuclide therapy, with imaging performed using bremsstrahlung single-photon emission computed tomography (SPECT). However, because {sup 90}Y also emits positrons through internal pair production with a very small branching ratio, positron emission tomography (PET) imaging is also available. Because of the insufficient image quality of {sup 90}Y bremsstrahlung SPECT, PET imaging has been suggested as an alternative. In this paper, the authors present the Monte Carlo-based simulation–reconstruction framework for {sup 90}Y to comprehensively analyze the PET and SPECT imaging techniques and to quantitatively consider the disadvantages associated with them. Methods: Our PET and SPECT simulation modules were developed using Monte Carlo simulation of Electrons and Photons (MCEP), developed by Dr. S. Uehara. PET code (MCEP-PET) generates a sinogram, and reconstructs the tomography image using a time-of-flight ordered subset expectation maximization (TOF-OSEM) algorithm with attenuation compensation. To evaluate MCEP-PET, simulated results of {sup 18}F PET imaging were compared with the experimental results. The results confirmed that MCEP-PET can simulate the experimental results very well. The SPECT code (MCEP-SPECT) models the collimator and NaI detector system, and generates the projection images and projection data. To save the computational time, the authors adopt the prerecorded {sup 90}Y bremsstrahlung photon data calculated by MCEP. The projection data are also reconstructed using the OSEM algorithm. The authors simulated PET and SPECT images of a water phantom containing six hot spheres filled with different concentrations of {sup 90}Y without background activity. The amount of activity was 163 MBq, with an acquisition time of 40 min. Results: The simulated {sup 90}Y-PET image accurately simulated the experimental results. PET image is visually superior to SPECT image because of the low background noise. The simulation reveals that the detected photon number in SPECT is comparable to that of PET, but the large fraction (approximately 75%) of scattered and penetration photons contaminates SPECT image. The lower limit of {sup 90}Y detection in SPECT image was approximately 200 kBq/ml, while that in PET image was approximately 100 kBq/ml. Conclusions: By comparing the background noise level and the image concentration profile of both the techniques, PET image quality was determined to be superior to that of bremsstrahlung SPECT. The developed simulation codes will be very useful in the future investigations of PET and bremsstrahlung SPECT imaging of {sup 90}Y.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

3D micromechanical simulation of PBX composites

Previous research studied the constitutive response and interface strength of a bonded bicrystal system containing two HMX explosive grains bound with a HTPB polymer binder by performing FE simulations on real geometry imaged with micro Computed Tomography (µCT). The parameters generated from this past study were successfully applied to 2D mesoscale simulations of µCT imaged HMX-HTPB polycrystal samples. Presently, the mechanical response of PBXs containing a Nitro-Plasticized Estane (NPE) binder with similar microstructural geometry to the HMX-HTPB polycrystal samples were studied. Imaging of a HMX-NPE bicrystal sample allowed for simulation of the new material pairing. However, imaging using µCT techniques on the new polycrystal samples was difficult due to the decrease in contrast between the HMX grains and the NPE binder. Mesoscale polycrystal simulations utilizing a single µCT imaged microstructure were performed on a 3D representative volume element (RVE) comparing the delamination behavior and mechanical response of both HMX-HTPB and HMX-NPE PBXs. Furthermore, this technique shows the ability to virtually explore the mechanical response of a range of hypothetical materials that share common microstructural geometric characteristics in addition to studying numerically altered geometries.

36 MATERIALS SCIENCE↗