Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Structural Health Monitoring of Composite Wound Pressure Vessels

The increasing use of advanced composite materials in the wide range of applications including Space Structures is a great impetus to the development of smart materials. Incorporating these FBG sensors for monitoring the integrity of structures during their life cycle will provide valuable information about viability of the usage of such material. The use of these sensors by surface bonding or embedding in this composite will measure internal strain and temperature, and hence the integrity of the assembled engineering structures. This paper focuses on such a structure, called a composite wound pressure vessel. This vessel was fabricated from the composite material: TRH50 (a Mitsubishi carbon fiber with a 710-ksi tensile strength and a 37 Msi modulus) impregnated with an epoxy resin from NEWPORT composites (WDE-3D-1). This epoxy resin in water dispersed system without any solvents and it cures in the 240-310 degrees F range. This is a toughened resin system specifically designed for pressure applications. These materials are a natural fit for fiber sensors since the polyimide outer buffer coating of fiber can be integrated into the polymer matrix of the composite material with negligible residual stress. The tank was wound with two helical patterns and 4 hoop wraps. The order of winding is: two hoops, two helical and two hoops. The wall thickness of the composite should be about 80 mil or less. The tank should burst near 3,000 psi or less. We can measure the actual wall thickness by ultrasonic or we can burst the tank and measure the pieces. Figure 1 shows a cylinder fabricated out of carbon-epoxy composite material. The strain in different directions is measured with a surface bonded fiber Bragg gratings and with embedded fiber Bragg gratings as the cylinder is pressurized to burst pressures. Figure 2 shows the strain as a function of pressure of carbon-epoxy cylinder as it is pressurized with water. Strain is measured in different directions by multiple gratings oriented in both axial and hoops directions.

Joseph Grant↗

Laser-Induced Fluorescence Photogrammetry for Dynamic Characterization of Transparent and Aluminized Membrane Structures

Photogrammetry has proven to be a valuable tool for static and dynamic profiling of membrane based inflatable and ultra-lightweight space structures. However, the traditional photogrammetric targeting techniques used for solid structures, such as attached retro-reflective targets and white-light dot projection, have some disadvantages and are not ideally suited for measuring highly transparent or reflective membrane structures. In this paper, we describe a new laser-induced fluorescence based target generation technique that is more suitable for these types of structures. We also present several examples of non-contact non-invasive photogrammetric measurements of laser-dye doped polymers, including the dynamic measurement and modal analysis of a 1m-by-1m aluminized solar sail style membrane.

Dorrington, Adrian A.↗

Probabilistic structural analysis of space propulsion system LOX post

The probabilistic structural analysis program NESSUS (Numerical Evaluation of Stochastic Structures Under Stress; Cruse et al., 1988) is applied to characterize the dynamic loading and response of the Space Shuttle main engine (SSME) LOX post. The design and operation of the SSME are reviewed; the LOX post structure is described; and particular attention is given to the generation of composite load spectra, the finite-element model of the LOX post, and the steps in the NESSUS structural analysis. The results are presented in extensive tables and graphs, and it is shown that NESSUS correctly predicts the structural effects of changes in the temperature loading. The probabilistic approach also facilitates (1) damage assessments for a given failure model (based on gas temperature, heat-shield gap, and material properties) and (2) correlation of the gas temperature with operational parameters such as engine thrust.

Newell, J. F.↗

Synthesis and characterization of the K{sub 2}NiF{sub 4} phases La{sub 1+x}Sr{sub 1-x}Co{sub 0.5}Fe{sub 0.5}O{sub 4-{delta}} (x=0, 0.2)

The K{sub 2}NiF{sub 4} phases LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 4} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 4}, and their reduced forms LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 3.75} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 3.85}, have been successfully prepared by solid-state reactions, followed by reduction in 10% H{sub 2}/N{sub 2} in order to produce oxygen-deficient materials. All materials crystallize in a tetragonal K{sub 2}NiF{sub 4} structure (space group I4/mmm) with Co and Fe randomly distributed over the B-sites of the structure. Moessbauer spectra have confirmed the trivalent state of Fe in these materials. In the reduced materials, oxide ion vacancies are confined to the equatorial planes of the K{sub 2}NiF{sub 4} structure and the Co is present almost entirely as Co{sup 2+} ions; low-temperature neutron powder diffraction data reveal that these reduced phases are antiferromagnetically ordered with a tetragonal noncollinear arrangement of the moments. The Co{sup 3+} ions, present in stoichiometric LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 4} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 4}, inhibit magnetic order and are assumed to be in the low-spin state. - Graphical abstract: The reduced K{sub 2}NiF{sub 4} phases LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 3.75} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 3.85} accommodate disordered oxide ion vacancies confined to equatorial planes of the structure. Magnetic exchange results in AFM order at low temperature, which can be represented by a tetragonal noncollinear model for the moments. Co{sup 3+} ions, present in stoichiometric LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 4} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 4}, inhibit magnetic order and are assumed to be in the low-spin state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inflatable/Deployable Airlock Structure

As part of NASA’s XHAB initiative, the University of Vermont (UVM) student design team is contributing to this program with a novel approach concept that combines Space Race era concepts – inflatable space structures – with 21st century materials and technology: braided reinforce inflatable “air beams” and carbon composite structures. NASA’s challenge for a team of senior engineering design students was to develop an “inflatable, habitable & deployable space airlock”.

Joseph Maser↗

Technology - The basis for the past, the key to the future

The relationship between new technology and space missions, and the objectives of the Civil Space Technology Initiative (CSTI) are studied. The CSTI is concerned with technologies for safe and efficient access to space, earth-orbiting operations, and future science missions. The initiative focuses on research in the areas of propulsion, vehicles, information systems, large space structures and their control, power, and automation and robotics. Consideration is given to the development of high-performance engines for next-generation vehicles, booster technology for hybrid and pressure-fed propulsion systems, and a space OTV based on the aerobrake concept. Research involved with the application of automation and robotics to earth-orbiting operations are discussed. The control of flexible structure flight experiment, the use of nuclear systems for space propulsion, and the development of sensor devices and high-rate, high-capacity data systems are examined.

Harris, Leonard A.↗

Making on-orbit structural repairs to Space Station

One of the key factors dictating the safety and durability of the proposed U.S. Space Station is the ability to repair structural damage while remaining in orbit. Consequently, studies are conducted to identify the engineering problems associated with accomplishing structural repairs on orbit, due to zero gravity environment and exposure to extreme temperature variations. There are predominant forms of structural failure, depending on the metallic or composite material involved. Aluminum is the primary metallic material used in space vehicle applications. Welding processes on aluminum alloy structures were tested, resulting in final selection of electron beam welding as the primary technique for metallic material repair in Space. Several composite structure repair processes were bench-tested to define their applicability to on-orbit EVA requirements: induction heating prevailed. One of the unique problems identified as inherent in the on-orbit repair process is that of debris containment. The Maintenance Work Station concept provides means to prevent module contamination from repair debris and ensure the creation of a facility for crew members to work easily in a microgravity environment. Different technologies were also examined for application to EVA repair activities, and the concept selected was a spring-loaded, collapsible, box-like Debris Containement and Collection Device with incorporated fold-down tool boards and handholes in the front panel.

Haber, Harry S.↗

Downscaling-Based Segmentation for Unresolved Images of Highly Heterogeneous Granular Porous Samples

Numerical simulations of pore-scale flow and transport in natural sediments require the knowledge of pore-space topology. Limited resolution of X-ray tomography is often insufficient to fully characterize pore-space structure within fine-grained regions. Single and multilevel threshold-based segmentation approaches are customarily employed to identify solid, pore and porous-solid regions by means of grey intensity thresholds. While the choice of cutoff thresholds is often arbitrary, it dramatically affects the effective properties and the dynamical response of the reconstructed porous structure. As such, we propose an algorithm of downscaling, i.e., the process of increasing image resolution, followed by segmentation, i.e., the identification of different phases, to reconstruct the unresolved pore-space from XCT images of natural geological porous media. The method, applicable to moderately unresolved, chemically homogeneous granular media, is based on a map between local pixel porosity and pore size that does not rely on the definition of arbitrary thresholds and it allows to generate a high-resolution binary image of the porous medium from poorly resolved grey-scale images. First, we validate the method on synthetic unresolved images and compare their known pore-space distribution with the extracted one. Then, we consider a synthetic porous medium and compare the pore size distribution, conductivity, and tortuosity between the original and the reconstructed structures. Finally, we apply the method to extract the pore-space distribution from unresolved XCT images of two natural sediment columns and use it (i) to parametrize a capillary-bundle model and (ii) to estimate the hydraulic conductivity by matching breakthrough behavior of passive solute transport.

58 GEOSCIENCES↗

Fuel-cladding chemical interaction of a prototype annular U-10Zr fuel with Fe-12Cr ferritic/martensitic HT-9 cladding

As an alternative fuel form, the annular metallic fuel design eliminates the liquid sodium bond between the fuel and the cladding, providing back-end fuel cycle and other benefits. The fuel-cladding chemical interaction (FCCI) of annular fuel also presents new features. In this work, state-of-the-art electron microscopy and spectroscopy techniques were used to study the FCCI of a prototype annular U-10wt%Zr (U-10Zr) fuel with ferritic/martensitic HT-9 cladding irradiated to 3.3% fission per initial heavy atom. Compared with sodium-bonded solid fuels, negligible amounts of lanthanides were found in the FCCI layer in the investigated helium-bonded annular fuel. Instead, most lanthanides were retained in the newly formed UZr 2 phase in the fuel center region. The interdiffusion of iron and uranium resulted in tetragonal ( U ,Zr) 6 Fe phase (space group I4/mcm) and cubic ( U ,Zr)( Fe ,Cr) 2 phase (space group Fd 3 ¯ m). The ( U ,Zr)( Fe ,Cr) 2 phase contains a high density of voids and intergranular uranium monocarbides of NaCl-type crystal structure (space group Fm 3 ¯ m). At the interdiffusion zone and inner cladding interface, a porous lamellar structure composed of alternating Cr-rich layers and U-rich layers was observed. Next to the lamellar region, the unexpected phase transformation from body-centered cubic ferrite (α-Fe) to tetragonal binary Fe-Cr σ phase (space group P4 2 /mnm) occurred, and tetragonal Fe-Cr-U-Si phase (space group I4/mmm) was identified. Due to the diffusion of carbon into the interdiffusion zone, carbon depletion inside the HT-9 led to the disappearance of the martensite lath structure, and intergranular U-rich carbides formed as a result of the diffusion of uranium into the cladding. These detailed new findings reveal the unique features of the FCCI behavior of annular U-Zr fuels, which could be a promising alternative fuel form for high burnup fast reactor applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

New dimensions for man

The functions of man in space have been in a state of constant change since the first manned orbital flight. Initially, the onboard crewmen performed those tasks essential to piloting and navigating the spacecraft. The time devoted to these tasks has steadily decreased and the crewman's time is being allotted to functions other than orbital operations. The evolving functions include added orbital operational capabilities, experimentation, spacecraft maintenance, and fabrication of useful end items. The new functions will include routine utilization of the crewman to extend mission life, satellite retrieval and servicing, remote manipulator systems operations, and piloting of free-flying teleoperator systems. The most demanding tasks are anticipated to be associated with construction of large space structures. The projected changes will introduce innovative designs and revitalize the concepts for utilizing man in space.

Louviere, A. J.↗

Comparison of Dynamic Characteristics for an Inflatable Solar Concentrator in Atmospheric and Thermal Vacuum Conditions

Dynamic testing of an inflatable solar concentrator structure in a thermal vacuum chamber as well as in ambient laboratory conditions is described in detail. Unique aspects of modal testing for the extremely lightweight inflatable are identified, including the use of a noncontacting laser vibrometer measurement system. For the thermal vacuum environment, mode shapes and frequency response functions are compared for three different test article inflation pressures at room temperature. Modes that persist through all the inflation pressure regimes are identified, as well as modes that are unique for each pressure. In atmospheric pressure and room temperature conditions, dynamic measurements were obtained for the expected operational inflation pressure of 0.5 psig. Experimental mode shapes and frequency response functions for ambient conditions are described and compared to the 0.5 psig results from the thermal vacuum tests. Only a few mode shapes were identified that occurred in both vacuum and atmospheric environments. This somewhat surprising result is discussed in detail, and attributed at least partly to 1.) large differences in modal damping, and 2.) significant differences in the mass of air contained by the structure, in the two environments. Results of this investigation point out the necessity of testing inflatable space structures in vacuum conditions before they can be launched. Ground testing in atmospheric pressure is not sufficient for predicting on-orbit dynamics of non-rigidized inflatable systems.

Slade, Kara N.↗

The automated strength-aeroelastic design of aerospace structures program

An ongoing program whose goal is to develop an automated procedure that can assist in the preliminary design of aircraft and space structures is described. The approach and capabilities that are to be included in the final procedures are descussed. By using proven engineering software as a basis for the project, a reliable and interdisciplinary procedure is developed. The use of a control language for module sequencing and execution permits efficient development of the procedure and gives the user significant flexibility in altering or enhancing the procedure. The data base system provides reliable and efficient access to the large amounts of interrelated data required in an enterprise of this sort. In addition, the data base allows interfacing with existing pre- and post-processors in an almost trivial manner. Altogether, the procedure promises to be of considerable utility to preliminary structural design teams.

Johnson, E. H.↗

Structural load control during construction

The topics are presented in viewgraph form and include the following: examples of high transient loadings on large space structures; energy absorbing/load limiting strut research objectives; scope of research on energy absorbing struts to date; energy characteristics of cantilevered trusses with a tip load; ten bay long resilient truss example; stored energy characteristics of one meter deep truss; energy absorbing potential for 10-bay 5-meter deep truss; schematic of energy absorbing strut; linear load and motion control actuator; rigid body response of a solar array to the shuttle thruster pressure impingement; solar array piecewise linear response; solar array characteristics; solar array tip deflection and required actuator stroke; solar array response from finite element analysis; 12 bay energy absorbing test bed dynamics; and new AERO-Lab with 12-bay test beam.

Mikulas, Martin↗

Input-output oriented computation algorithms for the control of large flexible structures

An overview is given of work in progress aimed at developing computational algorithms addressing two important aspects in the control of large flexible space structures; namely, the selection and placement of sensors and actuators, and the resulting multivariable control law design problem. The issue of sensor/actuator set selection is particularly crucial to obtaining a satisfactory control design, as clearly a poor choice will inherently limit the degree to which good control can be achieved. With regard to control law design, the researchers are driven by concerns stemming from the practical issues associated with eventual implementation of multivariable control laws, such as reliability, limit protection, multimode operation, sampling rate selection, processor throughput, etc. Naturally, the burden imposed by dealing with these aspects of the problem can be reduced by ensuring that the complexity of the compensator is minimized. Our approach to these problems is based on extensions to input/output oriented techniques that have proven useful in the design of multivariable control systems for aircraft engines. In particular, researchers are exploring the use of relative gain analysis and the condition number as a means of quantifying the process of sensor/actuator selection and placement for shape control of a large space platform.

Minto, K. D.↗

Cost effective development of a national test bed

For several years, the Marshall Space Flight Center has pursued the coordinated development of a Large Space Structures (LSS) National Test Bed for the investigation of numerous technical issues involved in the use of LSS in space. The origins of this development, the current status of the various test facilities and the plans laid down for the next five years' activities are described. Particular emphasis on the control and structural interaction issues has been paid so far; however, immediately emerging are user applications (such as the proposed pinhole occulter facility). In the immediate future, such emerging technologies as smart robots and multibody interactions will be studied. These areas are covered.

Waites, H. B.↗

The Effects of La Doping on the Crystal Structure, Magnetic, and Microwave Absorption Properties of Nd{sub 2}Fe{sub 14}B Compound

The crystal structure, magnetic, and microwave absorption properties of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B system have been investigated. The La{sub 2}Fe{sub 14}B compound was successfully synthesized and refined, giving a tetragonal structure, space group P4{sub 2}/mnm with the Nd{sub 2}Fe{sub 14}B-type structure. The crystal structure parameters of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B compounds were determined by full-profile Rietveld refinements. The results revealed that all intermediate alloys form a continuous solid solution. The normalized lattice parameters of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B compounds increase linearly with an increase of La concentration. Based on the results of DSC measurements and X-ray powder diffraction examinations, the phase diagram of the Nd{sub 2}Fe{sub 14}B-La{sub 2}Fe{sub 14}B system has been constructed. The remanence (M{sub r}) and coercivity (H{sub c}) of (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B (x = 0.00, 0.10, 0.20, 0.30, and 0.40) gradually decrease. The highest reflection loss is − 29.8, − 27.4, − 24.1, − 18.6, and − 14.2 dB at 9.8, 8.9, 7.5, 6.9, and 6.5 GHz, respectively. The absorption peak shifts toward from higher frequency region to lower frequency region and the absorption bandwidth widens with the increase of the La substitution.

36 MATERIALS SCIENCE↗

Research and development activities in unified control-structure modeling and design

Results of work sponsored by JPL and other organizations to develop a unified control/structures modeling and design capability for large space structures is presented. Recent analytical results are presented to demonstrate the significant interdependence between structural and control properties. A new design methodology is suggested in which the structure, material properties, dynamic model and control design are all optimized simultaneously. The development of a methodology for global design optimization is recommended as a long term goal. It is suggested that this methodology should be incorporated into computer aided engineering programs, which eventually will be supplemented by an expert system to aid design optimization. Recommendations are also presented for near term research activities at JPL. The key recommendation is to continue the development of integrated dynamic modeling/control design techniques, with special attention given to the development of structural models specially tailored to support design.

Nayak, A. P.↗

Active learning for accelerated design of layered materials

Hetero-structures made from vertically stacked monolayers of transition metal dichalcogenides hold great potential for optoelectronic and thermoelectric devices. Discovery of the optimal layered material for specific applications necessitates the estimation of key material properties, such as electronic band structure and thermal transport coefficients. However, screening of material properties via brute force ab initio calculations of the entire material structure space exceeds the limits of current computing resources. Moreover, the functional dependence of material properties on the structures is often complicated, making simplistic statistical procedures for prediction difficult to employ without large amounts of data collection. Here, we present a Gaussian process regression model, which predicts material properties of an input hetero-structure, as well as an active learning model based on Bayesian optimization, which can efficiently discover the optimal hetero-structure using a minimal number of ab initio calculations. The electronic band gap, conduction/valence band dispersions, and thermoelectric performance are used as representative material properties for prediction and optimization. The Materials Project platform is used for electronic structure computation, while the BoltzTraP code is used to compute thermoelectric properties. Bayesian optimization is shown to significantly reduce the computational cost of discovering the optimal structure when compared with finding an optimal structure by building a regression model to predict material properties. The models can be used for predictions with respect to any material property and our software, including data preparation code based on the Python Materials Genomics (PyMatGen) library as well as python-based machine learning code, is available open source.

36 MATERIALS SCIENCE↗