Search NASA⌕ Search

SEARCH · Search NASA

Results for “accelerator performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

NEXT Propellant Management System Integration With Multiple Ion Thrusters

As a critical part of the NEXT test validation process, a multiple-string integration test was performed on the NEXT propellant management system and ion thrusters. The objectives of this test were to verify that the PMS is capable of providing stable flow control to multiple thrusters operating over the NEXT system throttling range and to demonstrate to potential users that the NEXT PMS is ready for transition to flight. A test plan was developed for the sub-system integration test for verification of PMS and thruster system performance and functionality requirements. Propellant management system calibrations were checked during the single and multi-thruster testing. The low pressure assembly total flow rates to the thruster(s) were within 1.4 percent of the calibrated support equipment flow rates. The inlet pressures to the main, cathode, and neutralizer ports of Thruster PM1R were measured as the PMS operated in 1-thruster, 2-thruster, and 3-thruster configurations. It was found that the inlet pressures to Thruster PM1R for 2-thruster and 3-thruster operation as well as single thruster operation with the PMS compare very favorably indicating that flow rates to Thruster PM1R were similar in all cases. Characterizations of discharge losses, accelerator grid current, and neutralizer performance were performed as more operating thrusters were added to the PMS. There were no variations in these parameters as thrusters were throttled and single and multiple thruster operations were conducted. The propellant management system power consumption was at a fixed voltage to the DCIU and a fixed thermal throttle temperature of 75 C. The total power consumed by the PMS was 10.0, 17.9, and 25.2 W, respectively, for single, 2-thruster, and 3-thruster operation with the PMS. These sub-system integration tests of the PMS, the DCIU Simulator, and multiple thrusters addressed, in part, the NEXT PMS and propulsion system performance and functionality requirements.

Sovey, James S.↗

Electron Cloud in Steel Beam Pipe vs Titanium Nitride Coated and Amorphous Carbon Coated Beam Pipes in Fermilab's Main Injector

This paper documents the use of four retarding field analyzers (RFAs) to measure electron cloud signals created in Fermilab’s Main Injector during 120 GeV operations. The first data set was taken from September 11, 2009 to July 4, 2010. This data set is used to compare two different types of beam pipe that were installed in the accelerator. Two RFAs were installed in a normal steel beam pipe like the rest of the Main Injector while another two were installed in a one meter section of beam pipe that was coated on the inside with titanium nitride (TiN). A second data run started on August 23, 2010 and ended on January 10, 2011 when Main Injector beam intensities were reduced thus eliminating the electron cloud. This second run uses the same RFA setup but the TiN coated beam pipe was replaced by a one meter section coated with amorphous carbon (aC). This section of beam pipe was provided by CERN in an effort to better understand how an aC coating will perform over time in an accelerator. The research consists of three basic parts: (a) continuously monitoring the conditioning of the three different types of beam pipe over both time and absorbed electrons (b) measurement of the characteristics of the surrounding magnetic fields in the Main Injector in order to better relate actual data observed in the Main Injector with that of simulations (c) measurement of the energy spectrum of the electron cloud signals using retarding field analyzers in all three types of beam pipe.

Backfish, Michael↗

SYCL for Performance Portability: Application Experience with Coupled Cluster Formalism in Quantum Chemistry on Exascale Systems

The exascale computing has brought unprecedented heterogeneity in node architectures, with systems such as Frontier and Aurora featuring diverse GPU accelerators, network connectivity among others. Ensuring performance portability across these platforms is a key challenge. To address this, we employ the SYCL programming model to develop portable, high-performance quantum chemistry workloads. As a representative application, we focus on the non-iterative Triples component of the coupled-cluster CCSD(T) method, a key driver in quantum chemistry. In this work, we report on our experience deploying SYCL-based implementations using both DPC++ and AdaptiveCPP across two flagship exascale platforms: OLCF Frontier with AMD MI250X GPUs and ALCF Aurora with Intel GPUs. Our results demonstrate that SYCL enables efficient, single-source implementations that scale to thousands of nodes, delivering performance on par with vendor-optimized HIP solutions. We highlight key insights into runtime behavior, kernel portability, and scaling characteristics, showing that SYCL offers a viable path for performance-portable computing.

Bagusetty, Abhishek [Argonne National Laboratory (↗

Modeling Materials: Design for Planetary Entry, Electric Aircraft, and Beyond

NASA missions push the limits of what is possible. The development of high-performance materials must keep pace with the agency's demanding, cutting-edge applications. Researchers at NASA's Ames Research Center are performing multiscale computational modeling to accelerate development times and further the design of next-generation aerospace materials. Multiscale modeling combines several computationally intensive techniques ranging from the atomic level to the macroscale, passing output from one level as input to the next level. These methods are applicable to a wide variety of materials systems. For example: (a) Ultra-high-temperature ceramics for hypersonic aircraft-we utilized the full range of multiscale modeling to characterize thermal protection materials for faster, safer air- and spacecraft, (b) Planetary entry heat shields for space vehicles-we computed thermal and mechanical properties of ablative composites by combining several methods, from atomistic simulations to macroscale computations, (c) Advanced batteries for electric aircraft-we performed large-scale molecular dynamics simulations of advanced electrolytes for ultra-high-energy capacity batteries to enable long-distance electric aircraft service; and (d) Shape-memory alloys for high-efficiency aircraft-we used high-fidelity electronic structure calculations to determine phase diagrams in shape-memory transformations. Advances in high-performance computing have been critical to the development of multiscale materials modeling. We used nearly one million processor hours on NASA's Pleiades supercomputer to characterize electrolytes with a fidelity that would be otherwise impossible. For this and other projects, Pleiades enables us to push the physics and accuracy of our calculations to new levels.

Supercomputing↗

Record acceleration of the two-dimensional Ising model using a high-performance wafer-scale engine

The versatility and wide-ranging applicability of the Ising model, originally introduced to study phase transitions in magnetic materials, have made it a cornerstone in statistical physics and a valuable tool for evaluating the performance of emerging computer hardware. Here, we present a novel implementation of the two-dimensional Ising model on Cerebras Wafer-Scale Engine (WSE) – a revolutionary processor that is opening new frontiers in computing. In our deployment of the checkerboard algorithm, we optimized the Ising model to take advantage of the unique WSE architecture. Specifically, we employed a compressed bit representation storing 16 spins on each int16 word, and efficiently distributed the spins over the processing units enabling seamless weak scaling and limiting communications to only immediate neighboring units. Our implementation can handle up to 754 simulations in parallel, achieving an aggregate of over 61.8 trillion flip attempts per second for Ising models with up to 200 million spins. This represents a gain of up to 148 times over previously reported single-devices with a highly optimized implementation on NVIDIA V100 and up to 88 times in productivity compared to NVIDIA H100. Our findings highlight the significant potential of the WSE in scientific computing, particularly in the field of materials modeling.

Ising model↗

A critical review of irradiation-induced changes in reactor pressure vessel steels

A large body of work has been conducted to investigate the embrittlement and degradation of reactor pressure vessel (RPV) steels. This includes experiments on alloys with different compositions, performed in research and test reactors and ion accelerators that span various temperatures, fluxes, and fluences. In this paper, we perform a critical review of the published experimental data and compile experimentally reported values for dislocation loop size/density, precipitate size/density and yield stress into an easily downloadable format that can be used by both experimentalists and modelers. This thorough experimental review is complemented by a brief review of simulation efforts at atomistic and mesoscopic length scales. Finally, this paper highlights key aspects of the behavior of RPV steels under irradiation, identifies gaps or discrepancies in current understanding, and identifies priority future research directions.

36 MATERIALS SCIENCE↗

Superbeams and neutrino factories — Two paths to intense accelerator-based neutrino beams

High-energy and high-beam power accelerators are extensively used for the neutrino physics research. At present, the leading operational facilities are the J-PARC facility in Japan, which recently approached 0.5 MW of the 30 GeV proton beam power, and the Fermilab Main Injector complex that delivers over 0.75 MW of 120 GeV protons on the neutrino target. Besides such type of neutrino superbeams, the concept of neutrino factories offers great promise for particle physics research. In this brief review we present the status and planned upgrades of the J-PARC and Fermilab accelerators and leading proposals for the next generation accelerator-based facilities of both types, their challenges and required and ongoing accelerator R&D programs aimed to address corresponding performance and cost risks.

43 PARTICLE ACCELERATORS↗

Nek5000/RS Performance on Advanced GPU Architectures

We demonstrate NekRS performance results on various advanced GPU architectures. NekRS is a GPU-accelerated version of Nek5000 that is targeting high performance on forthcoming exascale platforms. It is being developed in DOE’s Center of Efficient Exascale Discretizations (CEED), which is one of the co-design centers under the Exascale Computing Project (ECP). In this report, we consider Frontier, Crusher, Spock, Polaris, Perlmutter, ThetaGPU and Summit. Simulations are performed using ExaSMR’s 17x17 rod-bundle geometries with different problem sizes. The report focuses on strong scaling performance and analysis. Many of the results shown in this report are the outcome from participation in the ALCF GPU Hackathon on Polaris, which was held on 7/19/22, and 7/26–7/28/22. Members of the Nek5000/RS team included Misun Min, Yu-Hsiang Lan, Paul Fischer and Thilina Rathnayake. Mentors were Kris Rowe (ALCF) and Peng Wang (NVIDIA). Also presented in this report are results on Frontier, which were obtained in collaboration with John Holmen at OLCF.

97 MATHEMATICS AND COMPUTING↗

Maximum von Mises Stress in the Loading Environment of Mass Acceleration Curve

Method for calculating stress due to acceleration loading: 1) Part has been designed by FEA and hand calculation in one critical loading direction judged by the analyst; 2) Maximum stress can be due to loading in another direction; 3) Analysis procedure to be presented determines: a) The maximum Mises stress at any point; and b) The direction of maximum loading associated with the "stress". Concept of Mass Acceleration Curves (MAC): 1) Developed by JPL to perform preliminary structural sizing (i.e. Mariners, Voyager, Galileo, Pathfinder, MER,...MSL); 2) Acceleration of physical masses are bounded by a curve; 3) G-levels of vibro-acoustic and transient environments; 4) Convergent process before the couple loads cycle; and 5) Semi-empirical method to effectively bound the loads, not a simulation of the actual response.

von Mises stress↗

Performance Effects of Adding a Parallel Capacitor to a Pulse Inductive Plasma Accelerator Powertrain

Pulsed inductive plasma accelerators are electrodeless space propulsion devices where a capacitor is charged to an initial voltage and then discharged through a coil as a high-current pulse that inductively couples energy into the propellant. The field produced by this pulse ionizes the propellant, producing a plasma near the face of the coil. Once a plasma is formed if can be accelerated and expelled at a high exhaust velocity by the Lorentz force arising from the interaction of an induced plasma current and the magnetic field. While there are many coil geometries that can be employed to inductively accelerate a plasma, in this paper the discussion is limit to planar geometries where the coil take the shape of a flat spiral. A recent review of the developmental history of planar-geometry pulsed inductive thrusters can be found in Ref. [1]. Two concepts that have employed this geometry are the Pulsed Inductive Thruster (PIT) and the Faraday Accelerator with Radio-frequency Assisted Discharge (FARAD).

Polzin, Kurt A.↗

SRF CAVITY PERFORMANCE OVERVIEW FOR THE 12 GeV UPGRADE

The CEBAF accelerator, a recirculating CW electron accelerator that is currently operating at Jefferson Laboratory, is in the process of having 10 new cryomodules installed to allow for the maximum beam energy to be increased from 6 GeV to 12 GeV. This upgrade required the fabrication, processing and RF qualification of 80, seven cell elliptical SRF cavities, a process that was completed in February 2012. The RF performance achieve in the vertical testing dewars has exceeded the design specification by {approx}25% and is a testament to the cavity design and processing cycle that has been implemented. This paper will provide a summary of the cavity RF performance in the vertical tests, as well as review the overall cavity processing cycle and duration for the project.

43 PARTICLE ACCELERATORS↗

Jefferson Lab Virtual Tour

Take a virtual tour of the campus of Thomas Jefferson National Accelerator Facility. You can see inside our two accelerators, three experimental areas, accelerator component fabrication and testing areas, high-performance computing areas and laser labs.

43 PARTICLE ACCELERATORS↗

ISO 50001 and SEP Faster and Cheaper - Exploring the Enterprise-Wide Approach

ISO 50001 and other management systems (e.g., ISO 9001 and ISO 14001) allow for implementation and certification at the enterprise level. The "Central Office" concept, which allows a small group of employees to manage and facilitate the organization’s energy management system (EnMS) at the enterprise level, was introduced within the ISO 50003 standard to provide guidance to ISO 50001 certification bodies. Four industrial companies have partnered with the United States Department of Energy to pilot the enterprise-wide ISO 50001/SEP concept under the Better Buildings Superior Energy Performance (SEP) Enterprise-wide Accelerator. Each organization developed a Central Office to host their EnMS while implementing ISO 50001/SEP at multiple physically separated sites. The four corporate partners tailored their Central Office implementation model to meet their own specific circumstances and needs. This paper reviews the commonalities, differences, and benefits of each of these enterprise-wide implementation models, including organizational structures, Central Office staff responsibilities, and key strategies. The cost savings and benefits of using the enterprise-wide approach were assessed, including the cost per site compared with that of a conventional, single-site ISO 50001/SEP implementation approach. This paper also discusses the drivers for the cost reductions realized through these enterprise-wide approaches. The four partner companies worked with 30 total sites. On average, these 30 sites improved energy performance by 5% annually over their SEP achievement periods, saved more than $600,000 annually in energy costs and reduced implementation cost for ISO 50001 and SEP by $19,000 and 0.8 Full Time Equivalent × years (FTE-yr) of staff time per site. The results can inform other organizations seeking to implement enterprise-wide ISO 50001/SEP, as well as energy efficiency organizations seeking to promote wider adoption of ISO 50001 implementation.

97 MATHEMATICS AND COMPUTING↗

Co-design of Advanced Architectures for Graph Analytics using Machine Learning

A graph is an excellent way of representing relationships among entities. We can use graph analytics to synthesize and analyze such relational data, and extract relevant features that are useful for various tasks such as machine learning. Considering the crucial role of graph analytics in various domains, it is important and timely to investigate the right hardware configurations that can achieve optimal performance for graph workloads on future high-performance computing systems. Design space exploration studies facilitate the selection of appropriate configurations (e.g. memory) to achieve a desired system performance. Recently, the approach of accelerating graph analytics using persistent non-volatile memory has gained a lot of attention. Traditional system simulators such as Gem5 and NVMain can be used to explore the design space of these advanced memory architectures for graph workloads. However, these simulators are slow in execution thus limiting the efficiency of design space exploration studies. To overcome this challenge, we proposed a machine learning based approach to co-design advanced memory architectures for graph workloads. We tested our approach with DRAM, non-volatile memory, and hybrid memory (DRAM+NVM) using a breadth first search benchmark algorithm. Our results showed the applicability of the proposed machine learning based approach to the co-design of the advanced memory architectures. In this paper, we provide recommendations on selecting advanced memory architectures to achieve desired performance for graph workloads. We also discuss the performances of different machine learning models that were considered in this study.

Kurte, Kuldeep↗

An Innovative Carbonate Fuel Cell Matrix, Abstract #188

The electrolyte matrix in direct carbonate fuel cell (DFC) is a microporous ceramic structure sandwiched between the electrodes to isolate the fuel from the oxidant, store electrolyte and facilitate ionic transport. FCE has advanced DFC electrolyte matrix over the years and demonstrated that the matrix meets the requirements for greater than 5 year life based on accelerated tests and field stack operations. However, development of advanced designs and materials that can further increase the performance and extend cell life will enable accelerated MCFC deployment. This paper will report the progress on the development of an unique and innovative matrix design that offers numerous benefits to the carbonate fuel cell performance and durability. In addition, this paper will also review parameters that affect matrix material stability and approaches to extend cell life.

08 HYDROGEN↗

Artificial intelligence inferred microstructural properties from voltage–capacity curves

Abstract The quantification of microstructural properties to optimize battery design and performance, to maintain product quality, or to track the degradation of LIBs remains expensive and slow when performed through currently used characterization approaches. In this paper, a convolution neural network-based deep learning approach (CNN) is reported to infer electrode microstructural properties from the inexpensive, easy to measure cell voltage versus capacity data. The developed framework combines two CNN models to balance the bias and variance of the overall predictions. As an example application, the method was demonstrated against porous electrode theory-generated voltage versus capacity plots. For the graphite|LiMn $$_2$$ 2 O $$_4$$ 4 chemistry, each voltage curve was parameterized as a function of the cathode microstructure tortuosity and area density, delivering CNN predictions of Bruggeman’s exponent and shape factor with 0.97 $$R^2$$ R 2 score within 2 s each, enabling to distinguish between different types of particle morphologies, anisotropies, and particle alignments. The developed neural network model can readily accelerate the processing-properties-performance and degradation characteristics of the existing and emerging LIB chemistries.

25 ENERGY STORAGE↗

Experimental and theoretical study on effects of magnetic field topology on near wall conductivity in a Hall thruster

An experiment has been made to investigate the effect of curved magnetic field topology on near wall conductivity in the ion acceleration region of Hall thrusters. The experimental results show that the electron current due to near wall conductivity is of the minimum in the case of focused topology and increases in the cases of both less-focus and over-focus topologies. This finding cannot be explained properly by the magnetic mirror effect, which is the one and only reported effect related to the magnetic field curvature so far. Based on the analysis of interaction between the plasma and the wall, a new physical effect is proposed. The difference of magnetic field topology causes different electric potential distribution, leads to different ion flux to the wall, results in the change of sheath property and secondary electron emission, and finally affects the electron current due to near wall conductivity. This effect is further justified by the agreement between the experiment and simulation which is performed with a particle-in-cell model. Therefore, we conclude that the ion flow injection is a significant effect to near wall conductivity in the scope of curved magnetic field topology besides the magnetic mirror effect. Moreover, we find that the focus topology of magnetic field is favorable to obtain a high thruster performance from both the ion acceleration aspect and the electron conduction aspect and so is useful practically for thruster optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗