Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Morphological Heterogeneity Impact of Film Solid-State Cathode on Utilization and Fracture Dynamics

Structural heterogeneity in solid-state batteries can impact material utilization and fracture mechanisms. Crystallographically oriented lithium cobalt oxide film cathodes serve as a model electrode system for exploring how void distribution contributes to stress relief and build up during cycling. Real- and reciprocal-space operando and ex situ synchrotron based experiments are utilized to understand structural changes across multiple length scales contribute to stress generation and fracture. Nanotomography uncovers a depth-dependent porosity variation in the pristine electrode and highlights preferential fracture in regions of lower porosity during delithiation. Energy-dispersive X-ray diffraction and 3D X-ray absorption near-edge spectroscopy (XANES) reveal the underutilization of cathode material in these regions. 3D XANES also confirms preferential delithiation near the sub-grain boundaries. Chemo-mechanical modeling coupled with site-specific mechanical characterization demonstrate how stress accumulation in dense regions of the electrode leads to fracture and underutilization of active material. In conclusion, our findings reveal the importance of materials design to alleviate stress in small-volume changing cathodes.

36 MATERIALS SCIENCE↗

Composition-tailored synthesis of gradient transition metal precursor particles for lithium-ion battery cathode materials.

We report the tailored synthesis of particles with internal gradients in transition metal composition aided by the use of a general process model. Tailored synthesis of transition metal particles was achieved using a coprecipitation reaction with tunable control over the process conditions. Gradients in the internal composition of the particles was monitored and confirmed experimentally by analysis of particles collected during regularly timed intervals. Particles collected from the reactor at the end of the process were used as the precursor material for the solid-state synthesis of Li{sub 1.2}(Mn{sub 0.62}Ni{sub 0.38}){sub 0.8}O{sub 2}, which was electrochemically evaluated as the active cathode material in a lithium battery. The Li{sub 1.2}(Mn{sub 0.62}Ni{sub 0.38}){sub 0.8}O{sub 2} material was the first example of a structurally integrated multiphase material with a tailored internal gradient in relative transition metal composition as the active cathode material in a lithium-ion battery. We believe our general synthesis strategy may be applied to produce a variety of new cathode materials with tunable interior, surface, and overall relative transition metal compositions.

25 ENERGY STORAGE↗

Li{sub 2}O removal from Li{sub 5}FeO{sub 4} - a cathode precursor for lithium-ion batteries.

Lithium has been extracted both electrochemically and chemically from the defect antifluorite-type structure, Li{sub 5}FeO{sub 4} (5Li{sub 2}O {center_dot} Fe{sub 2}O{sub 3}). The electrochemical data show that four lithium ions can be removed from Li{sub 5}FeO{sub 4} between 3.5 and 4.5 V. vs Li{sup 0}. X-ray absorption spectroscopy (XAS) data of electrochemically delithiated samples show evidence of some Fe{sup 3+} to Fe{sup 4+} oxidation during the initial charge. On the other hand, XAS data of chemically delithiated samples show no evidence of Fe{sup 3+} to Fe{sup 4+} oxidation, but rather a change in coordination of the Fe{sup 3+} ions from tetrahedral to octahedral coordination, suggesting that lithium extraction from Li{sub 5}FeO{sub 4} is accompanied predominantly by the release of oxygen, the net loss being lithia (Li{sub 2}O); the residual lithium-iron-oxide product has a Fe{sub 2}O{sub 3}-rich composition. The high lithium content in Li{sub 5}FeO{sub 4} renders it an attractive cathode precursor for loading the graphite (C{sub 6}) anode of lithium-ion electrochemical cells with sufficient lithium to enable the discharge of a charged component in the parent cathode, Li{sub 1.2}V{sub 3}O{sub 8}, as well as the residual Fe{sub 2}O{sub 3}-rich component. The electrochemical behavior of C{sub 6}/Li{sub 5}FeO{sub 4}?Li{sub 1/2}V{sub 3}O{sub 8} lithium-ion cells is compared to C{sub 6}/Li{sub 2}MnO{sub 3}?Li{sub 1.2}V{sub 3}O{sub 8} cells containing a layered Li{sub 2}MnO{sub 3} (Li{sub 2}O {center_dot} MnO{sub 2}) cathode precursor with a lower Li{sub 2}O content, from which lithia can be extracted at higher potentials, typically >4 V vs metallic lithium. The ability to remove Li{sub 2}O electrochemically from metal oxide host structures with a high lithium content, such as Li{sub 5}FeO{sub 4}, has implications for Li-air cells.

74 ATOMIC AND MOLECULAR PHYSICS↗

Tuning Li 2 O 2 Formation Routes by Facet Engineering of MnO 2 Cathode Catalysts

In lithium-oxygen batteries, the solubility of LiO 2 intermediates in the electrolyte regulates the formation routes of the Li 2 O 2 discharge product. High-donor-number electrolytes with a high solubility of LiO 2 tend to promote the formation of Li 2 O 2 large particles following the solution route, which eventually benefits the cell capacity and cycle life. Here, we propose that facet engineering of cathode catalysts could be another direction in tuning the formation routes of Li 2 O 2 . In this work, fi-MnO 2 crystals with high occupancies of {111} or {100} facets were adopted as cathode catalysts in Li-O 2 batteries with a tetra(ethylene)glycol dimethyl ether electrolyte. The {111}-dominated beta-MnO 2 catalyzed the formation of the Li 2 O 2 discharge product into large toroids following the solution routes, while {100}-dominated beta-MnO 2 facilitated the formation of Li 2 O 2 thin films through the surface routes. Further computational studies indicate that the different formation routes of Li 2 O 2 could be related to different adsorption energies of LiO 2 on the two facets of beta-MnO 2 . Our results demonstrate that facet engineering of cathode catalysts could be a new way to tune the formation route of Li 2 O 2 in a low-donor-number electrolyte. Here, we anticipate that this new finding would offer more choices for the design of lithium-oxygen batteries with high capacities and ultimately a long cycle life.

25 ENERGY STORAGE↗

Prediction of O2 Dissociation Kinetics on LaMnO3-Based Cathode Materials for Solid Oxide Fuel Cells

First-principles and statistical-theory calculations were applied to examine the interactions between oxygen molecules and the (100) surfaces of LaMnO3 and La0.5Sr0.5MnO2.75, one of the most-used cathode materials in solid oxide fuel cells (SOFCs). To predict the rate constants for the interactions between O2 and LaMnO3 or La0.5Sr0.5MnO2.75, potential energy profiles were constructed using the nudged elastic band (NEB) method. Predicted rate constants for the dissociation of adsorbed oxygen species on LaMnO3 (lm) and La0.5Sr0.5MnO2.75 (lsm) can be expressed as kdiss,lm ) 2.35 × 1012 exp(-0.50 eV/RT) s-1 and kdiss,lsm ) 2.15 × 1012 exp(-0.23 eV/RT) s-1, respectively, in the temperature range of 873-1273 K at 1 atm. Because the activation energy for oxygen dissociation on La0.5Sr0.5MnO2.75 (0.23 eV) is much smaller than that on LaMnO3 (0.50 eV), oxygen vacancies greatly enhance O2 dissociation kinetics. The kinetic and mechanistic studies for the interactions at the molecular level are imperative to gaining a fundamental understanding of oxygen reduction kinetics on cathode materials and to providing important insight into the rational design of more catalytically active cathode materials for SOFCs.

30 DIRECT ENERGY CONVERSION↗

Corrosion/Fragmentation of Layered Composite Cathode and Related Capacity/Voltage Fading during Cycling Process

Pristine and cycled layered structure cathode of Li[Li0.2Ni0.2M0.6]O2 samples are characterized by aberration-corrected scanning transmission electron microscopy and electron energy loss spectroscopy. These analyses provide new insights on capacity/voltage fading mechanism of Li[Li0.2Ni0.2M0.6]O2. Sponge-like structure and fragment pieces were found on the surface of cathode after cycling. Mn2+ species and reduced Li content in the fragments caused significant capacity loss. These results also reveal the functional mechanism of surface coatings, e.g. AlF3, which can protect the electrode from etching by acidic species in the electrolyte, suppress cathode degradation and improve long-term cycling stability.

Voltage fading, fragmentation, etched surface, Mn2↗

Evolution Of Lattice Structure And Chemical Composition Of The Surface Reconstruction Layer In Li1.2Ni0.2Mn0.6O2 Cathode Material For Lithium Ion Batteries

Voltage and capacity fading of layer structured lithium and manganese rich (LMR) transition metal oxide is directly related to the structural and composition evolution of the material during the cycling of the battery. However, understanding such evolution at atomic level remains elusive. Based on atomic level structural imaging, elemental mapping of the pristine and cycled samples and density functional theory calculations, it is found that accompanying the hoping of Li ions is the simultaneous migration of Ni ions towards the surface from the bulk lattice, leading to the gradual depletion of Ni in the bulk lattice and thickening of a Ni enriched surface reconstruction layer (SRL). Furthermore, Ni and Mn also exhibit concentration partitions within the thin layer of SRL in the cycled samples where Ni is almost depleted at the very surface of the SRL, indicating the preferential dissolution of Ni ions in the electrolyte. Accompanying the elemental composition evolution, significant structural evolution is also observed and identified as a sequential phase transition of C2/m →I41→Spinel. For the first time, it is found that the surface facet terminated with pure cation is more stable than that with a mixture of cation and anion. These findings firmly established how the elemental species in the lattice of LMR cathode transfer from the bulk lattice to surface layer and further into the electrolyte, clarifying the long standing confusion and debate on the structure and chemistry of the surface layer and their correlation with the voltage fading and capacity decaying of LMR cathode. Therefore, this work provides critical insights for designing of cathode materials with both high capacity and voltage stability during cycling.

Environmental Molecular Sciences Laboratory↗

Chemical factors controlling the behaviour of oxide cathodes in batteries

Oxide cathodes enable high-energy lithium-ion and sodium-ion batteries, with their performances fundamentally governed by three interrelated chemical factors: electronic configuration, chemical bonding, and chemical reactivity. Here, we illustrate how these factors dictate the redox energy, structural stability, ionic and electronic transport, and interfacial behavior in both layered oxide and polyanion oxide cathodes. We discuss how crystal-field effects and octahedral-site stabilization energies influence cation migration, and how inductive effects tune bond covalency and operating voltages. We also explain how chemical bonding governs thermal stability, gas evolution, and first-cycle capacity loss, and how alignment of transition-metal redox band with the oxygen 2p band determines electrolyte reactivity. Comparison between lithium and sodium layered oxides further reveals how differences in Li-O and Na-O bond ionicity affect chemical reactivity. Finally, we outline strategies including compositional tuning, surface doping, and electrolyte optimization, and emphasize how high-throughput, data-driven approaches in guiding the design of next-generation oxide cathodes.

25 ENERGY STORAGE↗

Hybrid polymer network cathode-enabled soluble-polysulfide-free lithium–sulfur batteries

Among the emerging 'beyond lithium-ion' technologies for maximized sustainability, lithium-sulfur (Li-S) is a favoured chemistry because of its exceptional energy density from the conversion of sulfur, an element in abundant supply. However, the dissolution of several intermediate polysulfides formed during conversion leads to rapid performance degradation over cycling. Here, in this study, we address this issue by sulfurizing a hybrid polymer network with polyphosphazene and carbon as a cathode for Li-S batteries. With rich sites to re-bond and adsorb dissociative sulfur species, this hybrid polymer network circumvents the formation of soluble polysulfides and enables a unique, reversible inserting conversion reaction. Thus, our cathode delivers both high capacity (~900 mAh g -1 cathode ) and excellent cycling stability in Li-S coin cells, with a pouch cell demonstration of projected energy density of ~300 Wh kg -1 and 84.9% capacity retention after 150 cycles. The strategy can be extended to other cost-effective, recyclable polymers, advancing sulfur-based batteries towards practical energy storage application.

25 ENERGY STORAGE↗

Generating multi-scale Li-ion battery cathode particles with radial grain architectures using stereological generative adversarial networks

Abstract Understanding structure-property relationships of Li-ion battery cathodes is crucial for optimizing rate-performance and cycle-life resilience. However, correlating the morphology of cathode particles, such as in LiNi0.8Mn0.1Co0.1O2 (NMC811), and their inner grain architecture with electrode performance is challenging, particularly, due to the significant length-scale difference between grain and particle sizes. Experimentally, it is not feasible to image such a high number of particles with full granular detail. A second challenge is that sufficiently high-resolution 3D imaging techniques remain expensive and are sparsely available at research institutions. Here, we present a stereological generative adversarial network-based model fitting approach to tackle this, that generates representative 3D information from 2D data, enabling characterization of materials in 3D using cost-effective 2D data. Once calibrated, this multi-scale model can rapidly generate virtual cathode particles that are statistically similar to experimental data, and thus is suitable for virtual characterization and materials testing through numerical simulations. A large dataset of simulated particles with inner grain architecture has been made publicly available.

25 ENERGY STORAGE↗

Ab initio study of lithium transition metal fluorophosphate cathodes for rechargeable batteries

Density functional theory (DFT) calculations using plane-wave methods were performed for Li2TMPO4F, LiTMPO4F, and TMPO4F (TM=V, Mn, Fe, Co, Ni) to address their feasibility as high-voltage cathode materials for Li ion batteries. We computed their structures, average open circuit voltages, and thermal stabilities for step-wise lithiation/delithation (discharge/charge) reactions. The calculations suggest that associated unit cell volume changes are sufficiently small on average that they should not be a significant detriment to the mechanical stability of the cathode. In the nickel case, the calculated volume change deviates from the series by increasing during the first delithiation step. Furthermore, the volume increases for all these materials during the second delithiation step. It appears that the relative volume expansion in the series during delithiation is directly correlated to the degree of d-p rehybridization. Predicted average open circuit voltages indicate that these Li-based transition metal fluorophosphates, most of which have yet to be successfully synthesized, are worthy of experimental pursuit as high-voltage cathodes (>3.5 V relative to Li metal), except for the lower predicted voltage for the reaction Li2VPO4F to LiVPO4F. However, examination of the relative thermal stability of possible undesirable decomposition products such as LiF suggests that in these materials Li extraction efficiency and the reversibility may be low in all but the vanadium phases.

25 ENERGY STORAGE↗

Factors Affecting the Battery Performance of Anthraquinone-based Organic Cathode Materials

Two organic cathode materials based on poly(anthraquinonyl sulfide) structure with different substitution positions were synthesized and their electrochemical behavior and battery performances were investigated. The substitution positions on the anthraquinone structure, binders for electrode preparation and electrolyte formulations have been found to have significant effects on the battery performances of such organic cathode materials. The substitution position with less steric stress has higher capacity, longer cycle life and better high-rate capability. Polyvinylidene fluoride binder and ether-based electrolytes are favorable for the high capacity and long cycle life of the quinonyl organic cathodes.

36 MATERIALS SCIENCE↗

Boosting the cycling stability of Ni-rich layered oxide cathode by dry coating of ultrastable Li 3 V 2 (PO 4 ) 3 nanoparticles

Nickel (Ni)-rich layered oxides such as LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) represent one of the most promising candidates for next-generation high-energy lithium-ion batteries (LIBs). However, the pristine Ni-rich cathode materials usually suffer from poor structural stability during cycling. In this work, we demonstrate a simple but effective approach to improve the cycling stability of the NCM622 cathode by dry coating of ultrastable Li 3 V 2 (PO 4 ) 3 -carbon (LVP-C) nanoparticles, which leads to a robust composite cathode (NCM622/LVP-C) without sacrificing the specific energy density compared with pristine NCM622. The optimal NCM622/LVP-C composite presents a high specific capacity of 162 mA h g -1 at 0.5 C and excellent cycling performance with 85.0% capacity retention after 200 cycles at 2 C, higher than that of the pristine NCM622 (67.6%). Systematic characterization confirms that the LVP-C protective layer can effectively reduce the side reactions, restrict the cation mixing of NCM622 and improve its structural stability. Moreover, the NCM622/LVP-C||graphite full cells also show a commercial-level capacity of 3.2 mA h cm -2 and much improved cycling stability compared with NCM622/LVP-C||graphite full cells, indicating the great promise for low-cost, high-capacity and long-life LIBs.

36 MATERIALS SCIENCE↗

Improving LiNiO 2 cathode performance through particle design and optimization

We report to enable further development of Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMC, x ≥ 0.9) cathodes for commercial applications, fundamental understanding of the synthesis–property–performance relationships in the LiNiO 2 (LNO) parent phase is essential. In the present study, we report synthesis approaches to produce well-formed, similar-sized single-crystal LiNiO 2 (SC-LNO) with different shapes and dominating surface facets, and reveal the dependence of cathode rate performance and cycling stability on particle morphology and surface. While octahedron-shaped SC-LNO with the (012) surface shows better rate capability and improved ability in utilizing the kinetically slow anodic process in the 3.5 V region, cubic-shaped SC-LNO with the (104) surface delivers superior cycling stability, especially upon cycling at a high upper cutoff voltage of 4.6 V. Improvement in cycling stability is correlated with reduced surface reconstruction and preferential LiF formation through the interaction with the electrolyte on the (104) surface. Our study not only demonstrates the importance of particle morphology and surface design, it also provides key insights into desirable material properties for developing future LNO-based cathode materials with better performance.

25 ENERGY STORAGE↗

Operation and Applications of the Boron Cathodic Arc Ion Source

The boron cathodic arc ion source has been developed with a view to several applications, particularly the problem of shallow junction doping in semiconductors. Research has included not only development and operation of the boron cathode, but other cathode materials as well. Applications have included a large deposition directed toward development of a neutron detector and another deposition for an orthopedic coating, as well as the shallow ion implantation function. Operational experience is described and information pertinent to commercial operation, extracted from these experiments, is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of background gas ionization on oscillations in a virtual cathode with a retarding potential

The effect of mobile ion background on the dynamics of a planar virtual cathode with retarding field is investigated. The ions appear in the diode gap due to ionization of a neutral gas by the electron beam. Detailed examination of the self-consistent processes of the virtual cathode dynamics, gas ionization, and ions motion is performed using the particle-in-cell simulation. It is shown that the presence of ions leads to the virtual cathode neutralization, its displacement, and subsequent anew formation. The microwave generation has the form of a sequence of pulse packets, whose duration depends on the value of the retarding potential and the kind of gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An interchangeable-cathode vacuum arc plasma source

A simplified vacuum arc design [based on metal vapor vacuum arc (MeVVA) concepts] is employed as a plasma source for a study of a {sup 7}Be non-neutral plasma. The design includes a mechanism for interchanging the cathode source. Testing of the plasma source showed that it is capable of producing on the order of 10{sup 12} charges at confinable energies using a boron-carbide disk as the cathode target. The design is simplified from typical designs for lower energy and lower density applications by using only the trigger spark rather than the full vacuum arc in high current ion beam designs. The interchangeability of the cathode design gives the source the ability to replace only the source sample, simplifying use of radioactive materials in the plasma source. The sample can also be replaced with a completely different conductive material. The design can be easily modified for use in other plasma confinement or full MeVVA applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High intensity, plasma-induced electron emission from large area carbon nanotube array cathodes

The plasma-induced electron emission properties of large area carbon nanotube (CNT) array cathodes under different pulse electric fields were investigated. The formation and expansion of cathode plasmas were proved; in addition, the cathodes have higher emission current in the double-pulse mode than that in the single-pulse mode due to the expansion of plasma. Under the double-pulse electric field of 8.16 V/mum, the plasma's expansion velocity is about 12.33 cm/mus and the highest emission current density reached 107.72 A/cm{sup 2}. The Cerenkov radiation was used to diagnose the distribution of electron beams, and the electron beams' generating process was plasma-induced emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗