Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Building an AI-enhanced modeling framework to address multiscale predictability challenges

Focal Area(s): Build an AI-enhanced modeling framework that integrates the three focus areas in the solicitation. Science Challenge: The 4M-2N complexities (Multiscale, Multiphysics, Multibody, Multidimension, Non-linearity, and Non-Gaussianality) of atmospheric aerosol-cloud-precipitation-turbulence-radiation system poses physical and computational challenges to further advance predictive models; We plan to address the challenges by developing an AI-enhanced modeling framework that facilitates automated calibration and improvement of subgrid parameterizations, enhance data assimilation of measurements to improve initial and boundary conditions used to drive the physical model, and optimally blends data-driven and physics-based forecasting models.

54 ENVIRONMENTAL SCIENCES↗

A new convective adjustment scheme

A marked divergence in philosophy is presented. The primary objective of the proposed parameterization scheme is to ensure that the local vertical temperature and moisture structures, which in nature are strongly constrained by convection, be realistic in the large scale model. The concept of a quasi-equilibrium between the cloud field and the large-scale forcing has been well established. This means that convective regions have characteristic temperature and moisture structures that can be documented observationally and used as the basis of a convective adjustment procedure. In the scheme proposed here, the temperature and moisture structures will be adjusted simultaneously toward observed quasi-equilibrium structures. This ensures that on the grid scale a global model always maintains a realistic vertical temperature and moisture structure in the presence of convection. The saturation point formulation of moist thermodynamics will be used to introduce the observational and theoretical basis of the proposed convective adjustment. The scheme is then applied to a series of data sets from GATE, BOMEX, ATEX and an Arctic air-mass transformation to show the sensitivity of the scheme to different parameters and develop a parameter set suitable for both shallow and deep convection in a global model.

Betts, A. K.↗

GMLS-Nets: A Framework for Learning from Unstructured Data

Data fields sampled on irregularly spaced points arise in many applications in the sciences and engineering. For regular grids, Convolutional Neural Networks (CNNs) have been successfully used to gaining benefits from weight sharing and invariances. We generalize CNNs by introducing methods for data on unstructured point clouds based on Generalized Moving Least Squares (GMLS). GMLS is a non-parametric technique for estimating linear bounded functionals from scattered data, and has recently been used in the literature for solving partial differential equations. By parameterizing the GMLS estimator, we obtain learning methods for operators with unstructured stencils. In GMLS-Nets the necessary calculations are local, readily parallelizable, and the estimator is supported by a rigorous approximation theory. We show how the framework may be used for unstructured physical data sets to perform functional regression to identify associated differential operators and to regress quantities of interest. The results suggest the architectures to be an attractive foundation for data-driven model development in scientific machine learning applications

97 MATHEMATICS AND COMPUTING↗

Improving Convection Parameterization Using ARM Observations and NCAR Community Atmosphere Model

We made significant contribution to the ASR program in this funding cycle by better representing convective processes in GCMs based on knowledge gained from analysis of ARM/ASR observations. In addition, our work led to a much improved understanding of the interaction among aerosol, convection, clouds and climate in GCMs. Below is a highlight of our achievements.

15 GEOTHERMAL ENERGY↗

Quantifying the Relationship between Organic Aerosol Composition and Hygroscopicity/CCN Activity

The overall objective for this project was to provide the data and underlying process level understanding necessary to facilitate the dynamic treatment of organic aerosol CCN activity in future climate models. The specific objectives were as follows: (1) employ novel approaches to link organic aerosol composition and CCN activity, (2) evaluate the effects of temperature and relative humidity on organic aerosol CCN activity, and (3) develop parameterizations to link organic aerosol composition and CCN activity.

54 ENVIRONMENTAL SCIENCES↗

Description of the Three-Dimensional Large-Scale Forcing Data from the 3D Constrained Variational Analysis (VARANAL3D)

This technical report introduces a Three-Dimensional Constrained Variational Analysis (3DCVA) (Tang and Zhang 2015) and its product of three-dimensional large-scale forcing data to drive single-column models (SCM), cloud-resolving models (CRM), and large-eddy simulation (LES) models, and to evaluate model results. The 3DCVA algorithm is an extension of the original 1D constrained variational analysis (1DCVA) (Zhang and Lin 1997, Zhang et al. 2001). The three-dimensional structure of the forcing data allows studies of spatial variation of the large-scale forcing fields and tests of physical parameterizations across scales. In the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility, the 3D forcing data are assigned the datastream name varanal3d. In this technical report, 3DCVA will be used to refer to the algorithm, while VARANAL3D will be used to refer to the data product.

54 ENVIRONMENTAL SCIENCES↗

Exploring ship track spreading rates with a physics-informed Langevin particle parameterization

Abstract. The rate at which aerosols spread from a point source injection, such as from a ship or other stationary pollution source, is critical for accurately representing subgrid plume spreading in a climate model. Such climate model results will guide future decisions regarding the feasibility and application of large-scale intentional marine cloud brightening (MCB). Prior modeling studies have shown that the rate at which ship plumes spread may be strongly dependent on meteorological conditions, such as precipitating versus non-precipitating boundary layers and shear. In this study, we apply a Lagrangian particle model (PM-ABL v1.0), governed by a Langevin stochastic differential equation, to create a simplified framework for predicting the rate of spreading from a ship-injected aerosol plume in sheared, precipitating, and non-precipitating boundary layers. The velocity and position of each stochastic particle is predicted with the acceleration of each particle being driven by the turbulent kinetic energy, dissipation rate, momentum variance, and mean wind. These inputs to the stochastic particle velocity equation are derived from high-fidelity large-eddy simulations (LES) equipped with a prognostic aerosol–cloud microphysics scheme (UW-SAM) to simulate an aerosol injection from a ship into a cloud-topped marine boundary layer. The resulting spreading rate from the reduced-order stochastic model is then compared to the spreading rate in the LES. The stochastic particle velocity representation is shown to reasonably reproduce spreading rates in sheared, precipitating, and non-precipitating cases using domain-averaged turbulent statistics from the LES.

54 ENVIRONMENTAL SCIENCES↗

Improving the Representation of Snow Crystal Properties with a Single-Moment Mircophysics Scheme

Single-moment microphysics schemes are utilized in an increasing number of applications and are widely available within numerical modeling packages, often executed in near real-time to aid in the issuance of weather forecasts and advisories. In order to simulate cloud microphysical and precipitation processes, a number of assumptions are made within these schemes. Snow crystals are often assumed to be spherical and of uniform density, and their size distribution intercept may be fixed to simplify calculation of the remaining parameters. Recently, the Canadian CloudSat/CALIPSO Validation Project (C3VP) provided aircraft observations of snow crystal size distributions and environmental state variables, sampling widespread snowfall associated with a passing extratropical cyclone on 22 January 2007. Aircraft instrumentation was supplemented by comparable surface estimations and sampling by two radars: the C-band, dual-polarimetric radar in King City, Ontario and the NASA CloudSat 94 GHz Cloud Profiling Radar. As radar systems respond to both hydrometeor mass and size distribution, they provide value when assessing the accuracy of cloud characteristics as simulated by a forecast model. However, simulation of the 94 GHz radar signal requires special attention, as radar backscatter is sensitive to the assumed crystal shape. Observations obtained during the 22 January 2007 event are used to validate assumptions of density and size distribution within the NASA Goddard six-class single-moment microphysics scheme. Two high resolution forecasts are performed on a 9-3-1 km grid, with C3VP-based alternative parameterizations incorporated and examined for improvement. In order to apply the CloudSat 94 GHz radar to model validation, the single scattering characteristics of various crystal types are used and demonstrate that the assumption of Mie spheres is insufficient for representing CloudSat reflectivity derived from winter precipitation. Furthermore, snow density and size distribution characteristics are allowed to vary with height, based upon direct aircraft estimates obtained from C3VP data. These combinations improve the representation of modeled clouds versus their radar-observed counterparts, based on profiles and vertical distributions of reflectivity. These meteorological events are commonplace within the mid-latitude cold season and present a challenge to operational forecasters. This study focuses on one event, likely representative of others during the winter season, and aims to improve the representation of snow for use in future operational forecasts.

Molthan, Andrew L.↗

Mesoscale Convective Systems Simulated by a High–Resolution Global Nonhydrostatic Model Over the United States and China

Mesoscale convective systems (MCSs) contribute a large fraction of warm-season precipitation and generate hazardous weather with substantial socio-economic impacts. Uncertainties in convection parameterizations in climate models limit our understanding of MCS characteristics and reliability of future projection. We examine the MCS simulation from the global 14-km Nonhydrostatic ICosahedral Atmospheric Model (NICAM) without cumulus parameterization against satellite observation from Global Precipitation Measurement (GPM) during 2001-2008. We focus on MCSs over the central U.S. and eastern China where MCSs prevail from March to August. A process-oriented tracking method incorporating both cloud and precipitation criteria is used to identify and track MCSs. About 140/100 MCSs initiate in the central U.S./eastern China per warm season and most of them initiate east of high mountains and in coastal regions. The frequency distribution of MCS lifetime is well captured in NICAM. But the simulated MCSs have stronger precipitation, smaller precipitation area, and larger cold cloud system than observed in both regions, which may be caused by weak entrainment as it is not well resolved at 14 km resolution. Here, the simulated MCS number is also underestimated in summer. By examining the climatological and MCS large-scale environments, the significant underestimation of MCS number in summer over the central U.S. may be attributed to the large climatological dry bias in the atmosphere. For China, mean moisture in summer is well simulated but deficiency in capturing the dynamic condition related to the coastal topography for triggering convection may have contributed to underestimation of MCS even in a sufficiently moist environment.

54 ENVIRONMENTAL SCIENCES↗

Tropical Gravity Wave Momentum Fluxes and Latent Heating Distributions

Recent satellite determinations of global distributions of absolute gravity wave (GW) momentum fluxes in the lower stratosphere show maxima over the summer subtropical continents and little evidence of GW momentum fluxes associated with the intertropical convergence zone (ITCZ). This seems to be at odds with parameterizations forGWmomentum fluxes, where the source is a function of latent heating rates, which are largest in the region of the ITCZ in terms of monthly averages. The authors have examined global distributions of atmospheric latent heating, cloud-top-pressure altitudes, and lower-stratosphere absolute GW momentum fluxes and have found that monthly averages of the lower-stratosphere GW momentum fluxes more closely resemble the monthly mean cloud-top altitudes rather than the monthly mean rates of latent heating. These regions of highest cloud-top altitudes occur when rates of latent heating are largest on the time scale of cloud growth. This, plus previously published studies, suggests that convective sources for stratospheric GW momentum fluxes, being a function of the rate of latent heating, will require either a climate model to correctly model this rate of latent heating or some ad hoc adjustments to account for shortcomings in a climate model's land-sea differences in convective latent heating.

momentum↗

Development of RAMS-CMAQ to Simulate Aerosol Optical Depth and Aerosol Direct Radiative Forcing and Its Application to East Asia

The air quality modeling system RAMS (Regional Atmospheric Modeling System)-CMAQ (Models-3 Community Multi-scale Air Quality) is developed to simulate the aerosol optical depth (AOD) and aerosol direct forcing (DF). The aerosol-specific extinction, single scattering albedo, and asymmetry factor are parameterized based on Mie theory taking into account the aerosol size distribution, composition, refractive index, and water uptake of solution particles. A two-stream solar radiative model considers all gaseous molecular absorption, Rayleigh scattering, and aerosols and clouds. RAMSCMAQ is applied to simulate all major aerosol concentrations (e.g., sulfate, nitrate, ammonium, organic carbon, black carbon, fine soil, and sea salt) and AOD and DF over East Asia in 2005. To evaluate its performance, the simulated AOD values were compared with ground-based in situ measurements. The comparison shows that RAMSCMAQ performed well in most of the model domain and generally captured the observed variations. High AOD values (0.2-1.0) mainly appear in the Sichuan Basin as well as in central and southeastern China. The geographic distribution of DF generally follows the AOD distribution patterns, and the DF at the top-of-the-atmosphere is less than -25 and -20 W m -2 in clear-sky and all-sky over the Sichuan Basin. Both AOD and DF exhibit seasonal variations with lower values in July and higher ones in January. The DF could obviously be impacted by high cloud fractions.

54 ENVIRONMENTAL SCIENCES↗

Comparison of entrainment rates from a tank experiment with results using the one-dimensional turbulence model.

Recent work suggests that cloud effects remain one of the largest sources of uncertainty in model-based estimates of climate sensitivity. In particular, the entrainment rate in stratocumulus-topped mixed layers needs better models. More than thirty years ago a clever laboratory experiment was conducted by McEwan and Paltridge to examine an analog of the entrainment process at the top of stratiform clouds. Sayler and Breidenthal extended this pioneering work and determined the effect of the Richardson number on the dimensionless entrainment rate. The experiments gave hints that the interaction between molecular effects and the one-sided turbulence seems to be crucial for understanding entrainment. From the numerical point of view large-eddy simulation (LES) does not allow explicitly resolving all the fine scale processes at the entrainment interface. Direct numerical simulation (DNS) is limited due to the Reynolds number and is not the tool of choice for parameter studies. Therefore it is useful to investigate new modeling strategies, such as stochastic turbulence models which allow sufficient resolution at least in one dimension while having acceptable run times. We will present results of the One-Dimensional Turbulence stochastic simulation model applied to the experimental setup of Sayler and Breidenthal. The results on radiatively induced entrainment follow quite well the scaling of the entrainment rate with the Richardson number that was experimentally found for a set of trials. Moreover, we investigate the influence of molecular effects, the fluids optical properties, and the artifact of parasitic turbulence experimentally observed in the laminar layer. In the simulations the parameters are varied systematically for even larger ranges than in the experiment. Based on the obtained results a more complex parameterization of the entrainment rate than currently discussed in the literature seems to be necessary.

54 ENVIRONMENTAL SCIENCES↗

Aerosol indirect effects ? general circulation model intercomparison and evaluation with satellite data

Aerosol indirect effects continue to constitute one of the most important uncertainties for anthropogenic climate perturbations. Within the international AEROCOM initiative, the representation of aerosol-cloud-radiation interactions in ten different general circulation models (GCMs) is evaluated using three satellite datasets. The focus is on stratiform liquid water clouds since most GCMs do not include ice nucleation effects, and none of the model explicitly parameterises aerosol effects on convective clouds. We compute statistical relationships between aerosol optical depth ({tau}{sub a}) and various cloud and radiation quantities in a manner that is consistent between the models and the satellite data. It is found that the model-simulated influence of aerosols on cloud droplet number concentration (N{sub d}) compares relatively well to the satellite data at least over the ocean. The relationship between {tau}{sub a} and liquid water path is simulated much too strongly by the models. This suggests that the implementation of the second aerosol indirect effect mainly in terms of an autoconversion parameterisation has to be revisited in the GCMs. A positive relationship between total cloud fraction (f{sub cld}) and {tau}{sub a} as found in the satellite data is simulated by the majority of the models, albeit less strongly than that in the satellite data in most of them. In a discussion of the hypotheses proposed in the literature to explain the satellite-derived strong f{sub cld} - {tau}{sub a} relationship, our results indicate that none can be identified as a unique explanation. Relationships similar to the ones found in satellite data between {tau}{sub a} and cloud top temperature or outgoing long-wave radiation (OLR) are simulated by only a few GCMs. The GCMs that simulate a negative OLR - {tau}{sub a} relationship show a strong positive correlation between {tau}{sub a} and f{sub cld} The short-wave total aerosol radiative forcing as simulated by the GCMs is strongly influenced by the simulated anthropogenic fraction of {tau}{sub a}, and parameterization assumptions such as a lower bound on N{sub d}. Nevertheless, the strengths of the statistical relationships are good predictors for the aerosol forcings in the models. An estimate of the total short-wave aerosol forcing inferred from the combination of these predictors for the modelled forcings with the satellite-derived statistical relationships yields a global annual mean value of -1.5 {+-} 0.5 Wm{sup -2}. In an alternative approach, the radiative flux perturbation due to anthropogenic aerosols can be broken down into a component over the cloud-free portion of the globe (approximately the aerosol direct effect) and a component over the cloudy portion of the globe (approximately the aerosol indirect effect). An estimate obtained by scaling these simulated clear- and cloudy-sky forcings with estimates of anthropogenic {tau}{sub a} and satellite-retrieved Nd - {tau}{sub a} regression slopes, respectively, yields a global, annual-mean aerosol direct effect estimate of -0.4 {+-} 0.2 Wm{sup -2} and a cloudy-sky (aerosol indirect effect) estimate of -0.7 {+-} 0.5 Wm{sup -2}, with a total estimate of -1.2 {+-} 0.4 Wm{sup -2}.

54 ENVIRONMENTAL SCIENCES↗

Parameterizing microphysical effects on variances and covariances of moisture and heat content using a multivariate probability density function: a study with CLUBB (tag MVCS)

Abstract. Microphysical processes, such as the formation, growth, and evaporation of precipitation, interact with variability and covariances (e.g., fluxes) in moisture and heat content. For instance, evaporation of rain may produce cold pools, which in turn may trigger fresh convection and precipitation. These effects are usually omitted or else crudely parameterized at subgrid scales in weather and climate models.A more formal approach is pursued here, based on predictive, horizontally averaged equations for the variances, covariances, and fluxes of moisture and heat content. These higher-order moment equations contain microphysical source terms. The microphysics terms can be integrated analytically, given a suitably simple warm-rain microphysics scheme and an approximate assumption about the multivariate distribution of cloud-related and precipitation-related variables. Performing the integrations provides exact expressions within an idealized context.A large-eddy simulation (LES) of a shallow precipitating cumulus case is performed here, and it indicates that the microphysical effects on (co)variances and fluxes can be large. In some budgets and altitude ranges, they are dominant terms. The analytic expressions for the integrals are implemented in a single-column, higher-order closure model. Interactive single-column simulations agree qualitatively with the LES. The analytic integrations form a parameterization of microphysical effects in their own right, and they also serve as benchmark solutions that can be compared to non-analytic integration methods.

54 ENVIRONMENTAL SCIENCES↗

Energy Exascale Earth System Model v2.0

First release of version 2 of the Energy Exascale Earth System Model. The atmosphere component remains EAM. Major changes since version 1 include: all column-physics parameterizations are computed on a separate grid that has approximately half the number of points of the dynamics grid, a new nonhydrostatic dynamical core (running in hydrostatic mode) with semi-Lagrangian tracer transport, CLUBB updated from v1 to v2, a new convective trigger (dCAPE/ULL) based on the dynamic Convective Available Potential Energy (CAPE) (dCAPE) and the Unrestricted Launch Level (ULL) concepts is used in ZM. minimum cloud droplet number changed, gravity wave drag energy conservation fixed and new tunings used, dust emission size distribution changed to emit more coarse dust particles The land component is still ELM. Major changes since version 1 include: using SNICAR-AD for radiation in snow to match the sea-ice model and fixing bugs in snow compaction and water state calculation. The ocean component remains MPAS-ocean. Major change since version 1 include: Redi isopycnal mixing has been updated, tested, and tuned in combination with the Gent-McWilliams parameterization, a sign error was fixed in the 3rd-order flux routines, the mesh used in low-resolution coupled cases was modified and the time steps adjusted, new regionally refined meshes were created, one focused on North America and another on the Southern Ocean, including ice shelf cavities. The sea-ice component remains MPAS-seaice. Major changes since version 1 include: A new heat- and freshwater-conserving coupling of frazil ice, turning off of SSH filtering, addition of SNICAR-AD and snow grain aging. The land-ice component remains MPAS-Albany-landIce (MALI) and is a static ice sheet. There is more out-of-the-box support for cryosphere configurations including the new regionally refined configuration around Antarctica with ice shelf cavities. The river model is MOSART. The half-degree river mesh was redone so it no longer treats Black and Caspian seas as ocean. The coupler remains cpl7/MCT. Major changes since version 1 include handling of ice shelf melt fluxes (heat / freshwater exchange with the ocean), and data icebergs. All components allow regional refinement of their meshes and two separate example of refinement, one in and around North America and one around Antarctica and the Southern Ocean, are provided.

E3SM Project, DOE↗

Remote Influence of Andean Convection on Amazonian Rainfall and Its Mechanisms

Models from Coupled Model Intercomparison Project Phase 6 produce too much precipitation over the Andes but too little over the Amazon or the Wet Andes-Dry Amazon (WADA) bias pattern. Unlike the conventional view that convection parameterization and land model deficiencies can contribute to Amazonian rainfall biases, we approach this long-standing biased model behavior through the lens of Andean convection. Using Community Earth System Model v1.1 and focusing on the wet season, our mechanism-denial experiments demonstrate that Andean convection notably reduces precipitation over the Amazon during austral summer. The Andean forced Amazonian response operates on weather timescale. Furthermore, the reduction of Amazonian rainfall is detectable within a few hours after initial Andean forcing. The precipitation response is primarily driven by variations in the moisture budget and is moderated by changes in convective available potential energy over the Amazon. Changes in the total advection of moisture over the Amazon are dominated by the vertical advection term and can be attributed to discrepancies in the dynamic omega field. In the experiments, the Andean east flank region is scrutinized where the vertical velocity and moisture fields play an intermediary role for the Andean driven WADA connection. The Andean forcing induces descending anomalies on the Andean east flank. The disturbances of wind and geopotential fields over the Andean east flank propagate eastward via Kelvin waves. Over the Amazon, descending anomalies and advective drying lead to reduction of mid-to-high level cloud, increase of shortwave cloud forcing and surface net radiation, and enhancement of themodynamic stability and rainfall reduction.

58 GEOSCIENCES↗

Assessing the drivers of Isoprene SOA: laboratory studies, field observations and modeling (Final Technical Report)

This report describes the research results and products stemming from the funding award DE-SC0018221. The main goals of this project were to develop a quantitative understanding of the factors driving secondary organic aerosol (SOA) formation from biogenic volatile organic compounds, namely isoprene and monoterpenes, using a combination of laboratory measurements, field data analysis, and modeling. Specifically, we aimed to: 1) develop an observationally constrained volatility distribution of trace gases produced from the oxidation of biogenic hydrocarbons that can explain the formation of SOA from in situ observations made during DOE ASR/ARM field campaigns such as HI-SCALE and BAECC 2) use new and existing (e.g. DOE ASR funded SOAFFEE experiments) laboratory chamber experiments to develop detailed parameterizations of isoprene-derived epxoy diol (IEPOX) reactive uptake, including product branching, product volatility, and solubility constants, as well as SOA formation generally from the formation of highly oxygenated organic molecules (HOM) formed from isoprene and monoterpene photo-oxidation that can be directly incorporated into models. 3) collaborate with PNNL modeling teams to incorporate new parameterizations into detailed box models, such as MOSAIC, and regional or Earth System models such as WRF.

54 ENVIRONMENTAL SCIENCES↗

Modeling tropical Pacific sea surface temperature with satellite-derived solar radiative forcing

Two independent datasets for the solar radiation at the surface derived from satellites are compared. The data derived from the Earth Radiation Budget Experiment (ERBE) is for the net solar radiation at the surface whereas the International Satellite Cloud Climatology Project (ISCCP) data is for the downward flux only and was corrected with a space- and time-varying albedo. The ISCCP net flux is at all times higher than the ERBE flux. The difference can be divided into an offset that decreases with latitude and another component that correlates with high tropical cloud cover. With this latter exception the two datasets provide spatial patterns of solar flux that are very similar. A tropical Pacific Ocean model is forced with these two datasets and observed climatological winds. The upward heat flux is parameterized taking into account separately the longwave radiative, latent, and sensible heat fluxes. Best fit values for the uncertain parameters are found using an optimization procedure that seeks to minimize the difference between model and observed SST by varying the parameters within a reasonable range of uncertainty. The SST field the model produces with the best fit parameters is the best the model can do. If the differences between the model and data are larger than can be accounted for by remaining uncertainties in the heat flux parameterization and forcing data then the ocean model must be held to be at fault. Using this method of analysis, a fundamental model fault is identified. Inadequate treatment of mixed layer/entrainment processes in upwelling regions of the eastern tropical Pacific leads to a large and seasonally varying error in the model SST. Elsewhere the model SST is insufficiently different from observed to be able to identify model errors.

Seager, Richard↗