Search NASA⌕ Search

SEARCH · Search NASA

Results for “density estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Electron density diagnostics in the 10-100 A interval for a solar flare

Electron density measurements from spectral-line diagnostics are reported for a solar flare on July 13, 1982, 1627 UT. The spectrogram, covering the 10-95 A interval, contained usable lines of helium-like ions C V, N VI, O VII, and Ne IX which are formed over the temperature interval 0.7-3.5 x 10 to the 6th K. In addition, spectral-line ratios of Si IX, Fe XIV, and Ca XV were compared with new theoretical estimates of their electron density sensitivity to obtain additional electron density diagnostics. An electron density of 3 x 10 to the 10th/cu cm was obtained. The comparison of these results from helium-like and other ions gives confidence in the utility of these tools for solar coronal analysis and will lead to a fuller understanding of the phenomena observed in this flare.

Brown, W. A.↗

Time-resolved study of the extreme-ultraviolet emission and plasma dynamics of a sub-Joule, fast capillary discharge

In this work, we discuss experimental observations on the dynamics of a fast, low energy capillary discharge when operated in argon and its properties as an intense source of extreme-ultraviolet (EUV) radiation. The discharge pre-ionization and self-triggering were accomplished by the use of the hollow cathode effect. This allowed a compact size and low inductance discharge with multi-kA current level and a quarter-period of ∼10 ns at sub-Joule energy level. We used the novel moiré and schlieren diagnostics with a 12 ps laser to obtain the time evolution of the line electron density and to study the plasma dynamics. EUV spectroscopy and filtered diodes were also implemented to estimate the plasma temperature and density throughout the evolution of the discharge. EUV source size was measured by using a filtered slit-wire camera. We observed that EUV emission starts from a compressed plasma on axis during the second quarter-period of the current and continues until the fifth quarter-period. Ionization levels from Ar VII to X were observed. By comparing the EUV emission spectra with synthetic spectra, we found that at the onset of emission (∼7 ns), the plasma is well fitted by a single Maxwellian electron distribution function with T{sub e} ∼ 12 eV and n{sub e} ∼ 10{sup 17 }cm{sup −3}. Close to peak emission (∼13 ns), plasma temperature and density increase to ∼20 eV and n{sub e} ∼ 10{sup 18 }cm{sup −3}, respectively. However, in order to successfully match the experimental data, a two component electron distribution function was necessary. Later in time, a smaller fraction in the high energy component and higher temperature suggests homogenization of the plasma. The moiré and schlieren diagnostics showed multiple radial compression-waves merging on axis throughout the discharge; they are an important heating mechanism that leads to a period of severe turbulence at peak EUV emission. It was also observed that emission ceases when the axial maximum of the electron density collapses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CONFIRMATION OF X-RAY ABSORPTION BY WARM-HOT INTERGALACTIC MEDIUM IN THE SCULPTOR WALL

In a previous paper, we reported a 3{sigma} detection of an absorption line from the warm-hot intergalactic medium (WHIM) using the Chandra and XMM X-ray grating spectra of the blazar H2356-309, the sight line of which intercepts the Sculptor Wall, a large-scale superstructure of galaxies at z {approx} 0.03. To verify our initial detection, we obtained a deep (500 ks), follow-up exposure of H2356-309 as part of the Cycle-10 Chandra Large Project Program. From a joint analysis of the Cycle-10 and previous (Cycle-8) Chandra grating data we detect the redshifted O VII WHIM line at a significance level of 3.4{sigma}, a substantial improvement over the 1.7{sigma} level reported previously when using only the Cycle-8 data. The significance increases to 4.0{sigma} when the existing XMM grating data are included in the analysis, thus confirming at higher significance the existence of the line at the redshift of the Sculptor Wall with an equivalent width of 28.5 {+-} 10.5 mA (90% confidence). We obtain a 90% lower limit on the O VII column density of 0.8 x 10{sup 16} cm{sup -2} and a 90% upper limit on the Doppler b parameter of 460 km s{sup -1}. Assuming the absorber is uniformly distributed throughout the {approx}15 Mpc portion of the blazar's sight line that intercepts the Sculptor Wall, that the O VII column density is {approx}2 x 10{sup 16} cm{sup -2} (corresponding to b {approx_gt} 150 km {sup -1} where the inferred column density is only weakly dependent on b), and that the oxygen abundance is 0.1 solar, we estimate a baryon over-density of {approx}30 for the WHIM, which is consistent with the peak of the WHIM mass fraction predicted by cosmological simulations. The clear detection of O VII absorption in the Sculptor Wall demonstrates the viability of using current observatories to study WHIM in the X-ray absorption spectra of blazars behind known large-scale structures.

79 ASTRONOMY AND ASTROPHYSICS↗

Square Root Statistics of Density Matrices and Their Applications

To estimate the degree of quantum entanglement of random pure states, it is crucial to understand the statistical behavior of entanglement indicators such as the von Neumann entropy, quantum purity, and entanglement capacity. These entanglement metrics are functions of the spectrum of density matrices, and their statistical behavior over different generic state ensembles have been intensively studied in the literature. As an alternative metric, in this work, we study the sum of the square root spectrum of density matrices, which is relevant to negativity and fidelity in quantum information processing. In particular, we derive the finite-size mean and variance formulas of the sum of the square root spectrum over the Bures–Hall ensemble, extending known results obtained recently over the Hilbert–Schmidt ensemble.

97 MATHEMATICS AND COMPUTING↗

Development of an All-Aqueous Thermally Regenerative Redox Flow Battery to Support Fossil Fuel Assets

Low-temperature thermal energy, a largely untapped resource, holds significant promise for large-scale electrical power generation globally. Various stationary sources, including industrial entities and thermal power plants, emit considerable low-temperature heat that currently remains unutilized. This energy is often overlooked because its low temperature renders it unsuitable for efficient power generation using conventional methods. However, current research is exploring diverse technologies capable of converting low-temperature heat into grid-scale power, aiming to enhance grid efficiency, further decarbonization initiatives, and facilitate a shift toward more decentralized power systems. One such innovative technology is the thermally regenerative battery (TRB), noted for its high power and energy densities compared to similar technologies, positioning it as a potential game-changer in power generation. TRBs integrate two scalable and well-established unit operations: a redox flow battery and a distillation column. This integration suggests that once an effective TRB chemistry is established, the pathway to commercialization could be expedited. The copper-based thermally regenerative ammonia battery (Cu aq -TRAB) stands out as the first TRB that circumvents electrodeposition/dissolution reactions, stabilizing Cu(I) and Cu(II) within the electrolyte and maintaining stability of all electroactive species in an aqueous phase. This stabilization has led to improvements in coulombic efficiency, open circuit potential, and copper solubility, thereby enhancing power density, energy density, and overall energy efficiency. Preliminary tests were conducted to determine the effects of various electrolyte species on the performance metrics of the battery, both theoretically and experimentally. These tests revealed that the solubility of copper in the Cu aq -TRAB electrolyte was constrained by the Cu(I)-NH 3 complex. Adjusting the background electrolyte to 5 M NH4Br and the ligand concentration to 4 M NH 3 enabled the copper concentration to reach a maximum of 0.6 M. This modification led to an estimated theoretical maximum energy density of 9.5 Wh L -1 for the Cu aq -TRAB. Additionally, full cell testing indicated a tradeoff between peak power and energy density with varying copper and ammonia concentrations. Increasing the applied current density during discharge linearly raised the average power output, with a minimal reduction in energy density due to a balance between higher ohmic overpotential and reduced time for undesirable ammonia crossover. Furthermore, a comprehensive numerical sensitivity analysis of the complete Cu aq -TRAB system was performed. This analysis aimed to assess how the battery and the distillation column responded to changes in system input parameters, providing insights into optimal research directions for enhancing system performance. The analysis revealed that at room temperature, battery power was significantly more sensitive to ohmic losses than to mass transfer, with reaction rates having minimal impact. This trend continued even at higher temperatures. Also, the thermal energy required for ammonia separation was studied, showing that increased temperatures generally reduced energy requirements, except in low-pressure scenarios above 65 °C. An investigation into membrane performance in the Cu aq -TRAB was undertaken, given the significant impact of ammonia transport control and ohmic losses on system performance. Various membranes were evaluated to identify key performance metrics. Among the tested membranes, Selemion CMVN exhibited the highest performance, with a peak power density of 84 mW cm -2 and average values of 26 ± 6.8 mW cm -2 for power density and 2.9 Wh L -1 for energy density at an applied current density of 50 mA cm -2 . An economic assessment indicated a levelized cost of storage at $410 per MWh under optimal conditions, highlighting the commercial potential of the Cu aq -TRAB when utilizing cost-effective, readily available materials.

25 ENERGY STORAGE↗

The ultraviolet absorption spectrum of the quasar PKS 0405-12 and the local density of Lyman-alpha absorption systems

A sample of 32 absorption lines has been identified in the ultraviolet spectrum of the z = 0.57 quasar PKS 0405-12. Data cover the wavelength range 1190-3260 A. There are 10 extragalactic Ly-alpha absorption lines in the complete sample, all with observed equivalent widths greater than or equal to 0.40 A; three of the Ly-alpha lines have Ly-beta counterparts. The number of Ly-alpha lines observed in the spectrum of PKS 0405-12 is within 1 sigma of the number predicted on the basis of previous HST observations of 3C 273 and of H1821 + 643. Combining the HST observations of 3C 273, H1821 + 643, and PKS 0405-12, we estimate the local number density of Ly-alpha systems with rest equivalent widths larger than 0.32 A to be about 15 +/- 4 Ly-alpha lines per unit redshift. Ground-based images reveal a rich field of galaxies in the direction of PKS 0405-12, including many galaxies with the brightnesses and sizes expected if they belong to a cluster associated with the quasar. The quasar spectrum does not show any evidence for absorption at the redshift of the emission lines, indicating a covering factor of less than unity for the halos of galaxies in the cluster around PKS 0405 - 12.

Bahcall, John N.↗

The impact of the phase-space density on the indirect detection of dark matter

We study the indirect detection of dark matter when the local dark matter velocity distribution depends upon position, as expected for the Milky Way and its dwarf spheroidal satellites, and the annihilation cross-section is not purely s-wave. Using a phase-space distribution consistent with the dark matter density profile, we present estimates of cosmic and gamma-ray fluxes from dark matter annihilations. The expectations for the indirect detection of dark matter can differ significantly from the usual calculation that assumes that the velocity of the dark matter particles follows a Maxwell-Boltzmann distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of a Polariton Condensate in Micropillars in a High Magnetic Field

The photoluminescence of a nonequilibrium polariton condensate in cylindrical and rectangular micropillars etched on the surface of a high-Q GaAs microcavity is investigated in magnetic fields of up to 12 T. The measurements are carried out under different levels of nonresonant optical pumping with nanosecond laser pulses for a wide range of cavity detuning. As far as nonresonant excitation produces a high density of excitons in a reservoir, it should be expected that the exciton–polariton interaction, which depends on the pump level, has a considerable effect on the Zeeman splitting and polarization of the condensate. However, measurements of the Zeeman splitting and polarization in high magnetic fields demonstrate that only minor changes take place up to the highest available pump levels. This means that, in the case under study, the effect of exciton–polariton interaction on the polariton system is insignificant. At the same time, the data obtained provide an estimate for the exciton density in the reservoir. In contrast to cylindrical micropillars, the photoluminescence of the condensate in rectangular micropillars consists of two perpendicularly linearly polarized lines which retain a high degree of linear polarization even in a field as high as 12 T. The Zeeman splitting in this case is nearly independent of the pump power. The degrees of both circular and linear polarization change with pump power, but these changes are noticeably smaller than the ones predicted theoretically. This indicates that the system of polaritons in micropillars deviates considerably from thermodynamic equilibrium.

36 MATERIALS SCIENCE↗

FIRST DETECTION OF [C I] {sup 3}P{sub 1}–{sup 3}P{sub 0} EMISSION FROM A PROTOPLANETARY DISK

We performed single point [C i] {sup 3}P{sub 1}–{sup 3}P{sub 0} and CO J = 4–3 observations toward three T Tauri stars (TTSs), DM Tau, LkCa 15, and TW Hya, using the Atacama Large Millimeter/submillimeter Array Band 8 qualification model receiver installed on the Atacama Submillimeter Telescope Experiment. Two protostars (PSs) in the Taurus L1551 region, L1551 IRS 5 and HL Tau, were also observed. We successfully detected [C i] emission from the protoplanetary disk around DM Tau as well as the protostellar targets. The spectral profile of the [C i] emission from the protoplanetary disk is marginally single-peaked, suggesting that atomic carbon (C) extends toward the outermost disk. The detected [C i] emission is optically thin and the column densities of C are estimated to be ≲10{sup 16} and ∼10{sup 17} cm{sup −2} for the TTS targets and the PSs, respectively. We found a clear difference in the total mass ratio of C to dust, M(C)/M(dust), between the TTSs and protostellar targets; the M(C)/M(dust) ratio of the TTSs is one order of magnitude smaller than that of the PSs. The decrease of the estimated M(C)/M(dust) ratios for the disk sources is consistent with a theoretical prediction that the atomic C can survive only in the near surface layer of the disk and C{sup +}/C/CO transition occurs deeper into the disk midplane.

79 ASTRONOMY AND ASTROPHYSICS↗

LUMINOUS INFRARED GALAXIES WITH THE SUBMILLIMETER ARRAY. III. THE DENSE KILOPARSEC MOLECULAR CONCENTRATIONS OF Arp 299

We have used high-resolution ({approx}2.''3) observations of the local (D{sub L} = 46 Mpc) luminous infrared galaxy Arp 299 to map out the physical properties of the molecular gas that provides the fuel for its extreme star formation activity. The {sup 12}CO J = 3-2, {sup 12}CO J = 2-1, and {sup 13}CO J = 2-1 lines were observed with the Submillimeter Array, and the short spacings of the {sup 12}CO J = 2-1 and J = 3-2 observations have been recovered using the James Clerk Maxwell Telescope single dish observations. We use the radiative transfer code RADEX to estimate the physical properties (density, column density, and temperature) of the different regions in this system. The RADEX solutions of the two galaxy nuclei, IC 694 and NGC 3690, are consistent with a wide range of gas components, from warm moderately dense gas with T{sub kin} > 30 K and n(H{sub 2}) {approx} 0.3-3 Multiplication-Sign 10{sup 3} cm{sup -3} to cold dense gas with T{sub kin} {approx} 10-30 K and n(H{sub 2}) > 3 Multiplication-Sign 10{sup 3} cm{sup -3}. The overlap region is shown to have a better constrained solution with T{sub kin} {approx} 10-50 K and n(H{sub 2}) {approx} 1-30 Multiplication-Sign 10{sup 3} cm{sup -3}. We estimate the gas masses and star formation rates of each region in order to derive molecular gas depletion times. The depletion times of all regions (20-50 Myr) are found to be about two orders of magnitude lower than those of normal spiral galaxies. This rapid depletion time can probably be explained by a high fraction of dense gas on kiloparsec scales in Arp 299. We estimate the CO-to-H{sub 2} factor, {alpha}{sub co} to be 0.4 {+-} 0.3(3 Multiplication-Sign 10{sup -4}/x{sub CO}) M{sub Sun} (K km s{sup -1} pc{sup 2}){sup -1} for the overlap region. This value agrees well with values determined previously for more advanced merger systems.

79 ASTRONOMY AND ASTROPHYSICS↗

A catalogue of cataclysmic variables from 20 yr of the Sloan Digital Sky Survey with new classifications, periods, trends, and oddities

ABSTRACT We present a catalogue of 507 cataclysmic variables (CVs) observed in SDSS I to IV including 70 new classifications collated from multiple archival data sets. This represents the largest sample of CVs with high-quality and homogeneous optical spectroscopy. We have used this sample to derive unbiased space densities and period distributions for the major sub-types of CVs. We also report on some peculiar CVs, period bouncers and also CVs exhibiting large changes in accretion rates. We report 70 new CVs, 59 new periods, 178 unpublished spectra, and 262 new or updated classifications. From the SDSS spectroscopy, we also identified 18 systems incorrectly identified as CVs in the literature. We discuss the observed properties of 13 peculiar CVS, and we identify a small set of eight CVs that defy the standard classification scheme. We use this sample to investigate the distribution of different CV sub-types, and we estimate their individual space densities, as well as that of the entire CV population. The SDSS I to IV sample includes 14 period bounce CVs or candidates. We discuss the variability of CVs across the Hertzsprung–Russell diagram, highlighting selection biases of variability-based CV detection. Finally, we searched for, and found eight tertiary companions to the SDSS CVs. We anticipate that this catalogue and the extensive material included in the Supplementary Data will be useful for a range of observational population studies of CVs.

79 ASTRONOMY AND ASTROPHYSICS↗

The Spitzer mid-infrared AGN survey. II. The demographics and cosmic evolution of the AGN population

We present luminosity functions derived from a spectroscopic survey of active galactic nuclei (AGNs) selected from Spitzer Space Telescope imaging surveys. Selection in the mid-infrared is significantly less affected by dust obscuration. We can thus compare the luminosity functions of obscured and unobscured AGNs in a more reliable fashion than by using optical or X-ray data alone. We find that the AGN luminosity function can be well described by a broken power-law model in which the break luminosity decreases with redshift. At high redshifts (z>1.6), we find significantly more AGNs at a given bolometric luminosity than found by either optical quasar surveys or hard X-ray surveys. The fraction of obscured AGNs decreases rapidly with increasing AGN luminosity, but, at least at high redshifts, appears to remain at ≈50% even at bolometric luminosities ∼10{sup 14} L{sub ⊙}. The data support a picture in which the obscured and unobscured populations evolve differently, with some evidence that high luminosity obscured quasars peak in space density at a higher redshift than their unobscured counterparts. The amount of accretion energy in the universe estimated from this work suggests that AGNs contribute about 12% to the total radiation intensity of the universe, and a high radiative accretion efficiency ≈0.18{sub −0.07}{sup +0.12} is required to match current estimates of the local mass density in black holes.

79 ASTRONOMY AND ASTROPHYSICS↗

Possibility of Saturnian synchrotron radiation

Several synchrotron spectra are computed for a hypothetical Saturnian radiation belt. A monoenergetic distribution of relativistic electrons is assumed to exist in a toroidal volume in a dipole magnetic field aligned with the rotation axis. When synchrotron emission is added to the thermal component implied by observations at wavelengths shorter than 50 cm, the upturn in the total emission spectrum can become gradual to quite sharp depending on the critical wavelength and the number density of radiating electrons. As an example, the ranges of magnetic field intensity, and electron energy and density are tabulated for an estimate of the nonthermal component at the longest decimetric wavelength observation. The present observations are insufficient to determine the critical wavelength; but, for several estimates of the magnetic field loading factor, the minimum surface magnetic field intensity and minimum electron number density are computed.

Luthey, J. L.↗

Sources of error and methods to improve accuracy in interface state density analysis using quasi-static capacitance–voltage measurements in wide bandgap semiconductors

Characterizing interface trap states in commercial wide bandgap devices using frequency-based measurements requires unconventionally high probing frequencies to account for both fast and slow traps associated with wide bandgap materials. The C - ψs technique has been suggested as a viable quasi-static method for determining the interface trap state densities in wide bandgap systems, but the results are shown to be susceptible to errors in the analysis procedure. Here this work explores the primary sources of errors present in the C - ψs technique using an analytical model that describes the apparent response for wide bandgap MOS capacitor devices. Measurement noise is shown to greatly impact the linear fitting routine of the 1/C$^{*2}_s$ vs Ψ s plot to calibrate the additive constant in the surface potential/gate voltage relationship, and an inexact knowledge of the oxide capacitance is also shown to impede interface trap state analysis near the band edge. In addition, a slight nonlinearity that is typically present throughout the 1/C$^{*2}_s$ vs Ψ s plot hinders the accurate estimation of interface trap densities, which is demonstrated for a fabricated n-SiC MOS capacitor device. Methods are suggested to improve quasi-static analysis, including a novel method to determine an approximate integration constant without relying on a linear fitting routine.

42 ENGINEERING↗

Inference of Experimental Radial Impurity Transport on Alcator C-Mod: Bayesian Parameter Estimation and Model Selection.

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. We find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inference of experimental radial impurity transport on Alcator C-Mod: Bayesian parameter estimation and model selection

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. Here, we find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An IUE survey of interstellar H I Ly alpha absorption. 2: Interpretations

We present an analysis of interstellar neutral hydrogen column densities obtained from archival Ly alpha absorption line data toward the complete sample of B2 and hotter stars observed at high spectral resolution with the IUE satellite. The full sample includes 554 stars and more than doubles the number of lines of sight previously observed. Many of the B2 and B1.5 stars exhibit contamination from stellar Ly alpha absorption, and were excluded from the subsequent analysis. The final working sample includes 393 stars. We present statistical averages for a number of quantities derived for the sample. The stars range in distance from 0.12 to 11 kpc with an average distance of 2.1 kpc. Values for average sight-line density range from 0.017 to 8.62 atoms cm(exp -3), with an overall average of 0.23 atoms cm(exp -3). Neutral hydrogen and dust are well correlated, with N(H I)/E(B - V) = 4.93 x 10(exp 21) cm(exp -2) mag(exp -1), and N(H I)/E(Bump) = 2.17 x 10(exp 21) cm(exp -2) mag(exp -1). There is an increase in the H I to dust ratios for the densest sight lines. Evidently, the H I to dust ratios in dense clouds are higher than in the lower density medium between the clouds and in interarm directions. The effect is probably an indication of dust modification in the dense clouds. The H I to dust ratios are approx. 17% smaller for the sight lines to O stars compared to the ratios found toward B stars. We have identified sight lines with anomalously large and small values of N(H I)/E(B - V) and H(H I)/E(Bump). Some of these sight lines are well-known examples of peculiar extinction (i.e., HD 147933 and HD 37061 (NU Ori)). Others are less well known and may provide important new examples of regions with highly modified dust. The number of stars with anomalously low H I to dust ratios is disproportionately larger than the number of stars with anomalously high H I to dust ratios. The distribution of the gas away form the Galactic plane for the sample of objects is complex. For the subset of 375 stars whose lines of sight have a statistically low probablility of intersecting a large cloud, the distribution may be roughly approximated by an exponential density distribution, with a midplane density of 0.366 atoms cm(exp -3), a scale height of 195 pc, and a random logarithmic scattering parameter sigma (sub p) of 0.159 dex. For the same sample of stars, interstellar dust is found to be confined closer to the plane than the H I, with (E(B - V)/r)(sub 0) = 0.257 mag kpc(exp -1), scale height h = 152 pc, and sigma(sub p) = 0.263 dex. The dust distribution is more inhomogeneous than the gas distribution. The observed distribution of H I away from the Galactic plane can also be fitted with a two-component exponential model including the effects of patchiness. Unfortunately, the foreground contamination produced by the cloudy and more confined component of H I makes it difficult to estimate the scale height of the extended component without invoking an independent estimate of its midplane density. Assuming n(sub 2)(0) = 0.16 cm(exp -3) from the Copernicus satellite H I/H(sub 2) survey, we obtain n(sub 1)(0) = 0.247 cm(exp -3), h(sub 1) = 73 PC, and h(sub 2) + 357 pc.

Diplas, Athanassios↗

Optical Density Analysis of X-Rays Utilizing Calibration Tooling to Estimate Thickness of Parts

This process is designed to estimate the thickness change of a material through data analysis of a digitized version of an x-ray (or a digital x-ray) containing the material (with the thickness in question) and various tooling. Using this process, it is possible to estimate a material's thickness change in a region of the material or part that is thinner than the rest of the reference thickness. However, that same principle process can be used to determine the thickness change of material using a thinner region to determine thickening, or it can be used to develop contour plots of an entire part. Proper tooling must be used. An x-ray film with an S-shaped characteristic curve or a digital x-ray device with a product resulting in like characteristics is necessary. If a film exists with linear characteristics, this type of film would be ideal; however, at the time of this reporting, no such film has been known. Machined components (with known fractional thicknesses) of a like material (similar density) to that of the material to be measured are necessary. The machined components should have machined through-holes. For ease of use and better accuracy, the throughholes should be a size larger than 0.125 in. (.3 mm). Standard components for this use are known as penetrameters or image quality indicators. Also needed is standard x-ray equipment, if film is used in place of digital equipment, or x-ray digitization equipment with proven conversion properties. Typical x-ray digitization equipment is commonly used in the medical industry, and creates digital images of x-rays in DICOM format. It is recommended to scan the image in a 16-bit format. However, 12-bit and 8-bit resolutions are acceptable. Finally, x-ray analysis software that allows accurate digital image density calculations, such as Image-J freeware, is needed. The actual procedure requires the test article to be placed on the raw x-ray, ensuring the region of interest is aligned for perpendicular x-ray exposure capture. One or multiple machined components of like material/ density with known thicknesses are placed atop the part (preferably in a region of nominal and non-varying thickness) such that exposure of the combined part and machined component lay-up is captured on the x-ray. Depending on the accuracy required, the machined component fs thickness must be carefully chosen. Similarly, depending on the accuracy required, the lay-up must be exposed such that the regions of the x-ray to be analyzed have a density range between 1 and 4.5. After the exposure, the image is digitized, and the digital image can then be analyzed using the image analysis software.

Grau, David↗