Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Diffusion-mediated passing of molecular species in linear nanopores constrained by orientational alignment

For diffusion-mediated catalytic conversion reactions in materials with narrow linear nanopores, e.g., mesoporous silica MCM-41, a key parameter is the propensity for product species to be able to pass reactant species and thus to efficiently exit the pore. For elongated species, this can require orientational alignment with the pore axis. In this work, we perform benchmark analyses for such solution-phase systems where one of these species is elongated in order to quantify the dependence of this passing propensity, P, on pore diameter and on the rotational diffusion coefficient, Dr, of the elongated species. In particular, we consider the passing of a spherical and an elongated spherocylindrical shaped species in a cylindrical pore in an implicit solvent, where these species cannot overlap. Passing is mediated by diffusive Brownian motion of these species as described by strongly damped Langevin dynamics. We quantify scaling of P for pore width just above the threshold where passing is sterically blocked, and also reveal a significant decrease in P for lower Dr. We also consider the dependence of P on the aspect ratio of the elongated species and obtain an exact result in the limiting regime of large aspect ratio.

Brownian motion↗

Surface texture of single-crystal silicon oxidized under a thin V{sub 2}O{sub 5} layer

The process of surface texturing of single-crystal silicon oxidized under a V{sub 2}O{sub 5} layer is studied. Intense silicon oxidation at the Si–V{sub 2}O{sub 5} interface begins at a temperature of 903 K which is 200 K below than upon silicon thermal oxidation in an oxygen atmosphere. A silicon dioxide layer 30–50 nm thick with SiO{sub 2} inclusions in silicon depth up to 400 nm is formed at the V{sub 2}O{sub 5}–Si interface. The diffusion coefficient of atomic oxygen through the silicon-dioxide layer at 903 K is determined (D ≥ 2 × 10{sup –15} cm{sup 2} s{sup –1}). A model of low-temperature silicon oxidation, based on atomic oxygen diffusion from V{sub 2}O{sub 5} through the SiO{sub 2} layer to silicon, and SiO{sub x} precipitate formation in silicon is proposed. After removing the V{sub 2}O{sub 5} and silicon-dioxide layers, texture is formed on the silicon surface, which intensely scatters light in the wavelength range of 300–550 nm and is important in the texturing of the front and rear surfaces of solar cells.

36 MATERIALS SCIENCE↗

The Electrochemical Behavior of Tellurium Tetrachloride in LiCl-KCl Eutectic Molten Salt at 450 ºC

Cyclic voltammetry CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy measurements were carried out in 1 and 5 wt% TeCl 4 containing LiCl-KCl eutectic molten salt at 450 °C using tungsten and glassy carbon as working electrodes. Reduction of Te(IV) to Te(0) occurred in three steps at potentials more negative than -0.4 V Ag/AgCl . The Te(0) was further reduced to Te 2- at more negative potentials. Formation of Te 2- was observed at potentials more negative than -2.2 V Ag/AgCl . Diffusivities of Te 4+ , Te 2+ , and Te 2- and their formal potentials were estimated from the CV data. The diffusion coefficients of Te 4+ , Te 2+ and Te 2- were 0.9 × 10 -5 , 3.8 × 10 -5 , and 1.5 × 10 -5 cm 2 s -1 , respectively in the 1 wt% TeCl 4 containing LiCl-KCl molten salt. The diffusivity of Te species generally decreased with increase in the concentration of TeCl 4 .

Electrochemistry↗

Two-dimensional hygrothermal diffusions into a finite width composite laminate

Two dimensional hygroscopic diffusion into composite laminates with free edges was obtained through the use of a second order finite difference scheme. A computer program was developed for the transient nonlinear coupled hygrothermal diffusion into finite width laminates with varying surface conditions along two edges. The formulation permits the diffusion coefficient to be a function of temperature, moisture concentration, and fiber orientation. The moisture distributions thus obtained are necessary for analysis of the moisture induced interlaminar stresses in the vicinity of free edges. It is shown that large diffusion times tend to eliminate the significance of stacking sequence, but gradients within and between layers are significant for all diffusion times.

Farley, G. L.↗

Plasma diffusion at the magnetopause - The case of lower hybrid drift waves

The diffusion expected from the quasi-linear theory of the lower hybrid drift instability at the earth's magnetopause is recalculated. The resulting diffusion coefficient is marginally large enough to explain the thickness of the boundary layer under quiet conditions, based on observational upper limits for the wave intensities. Thus, one possible model for the boundary layer could involve equilibrium between the diffusion arising from lower hybrid waves and various loss processes.

Treumann, R. A.↗

Effect of magnetic helicity upon rectilinear propagation of charged particles in random magnetic fields

When charged particles spiral along a large constant magnetic field, their trajectories are scattered by any random field components that are superposed on the guiding field. If the random field configuration embodies helicity, the scattering is asymmetrical with respect to a plane perpendicular to the guiding field, for particles moving into the forward hemisphere are scattered at different rates from those moving into the backward hemisphere. This asymmetry gives rise to new terms in the transport equations that describe propagation of charged particles. Helicity has virtually no impact on qualitative features of the diffusive mode of propagation. However, characteristic velocities of the coherent modes that appear after a highly anisotropic injection exhibit an asymmetry related to helicity. Explicit formulas, which embody the effects of helicity, are given for the anisotropies, the coefficient diffusion, and the coherent velocities. Predictions derived from these expressions are in good agreement with Monte Carlo simulations of particle transport, but the simulations reveal certain phenomena whose explanation calls for further analytical work.

Earl, James A.↗

Modelling of Trapped Radiation Near Jupiter

Energetic (62 to approx. 130 MeV) proton fluxes measured with the Galileo Probe inside Jupiter's main ring (radii 122,500 to 128,940 km) show a modest increase as Jupiter is approached. Solutions of a reduced (1-d) equatorial diffusion equation with-constant losses described by a lifetime tau match those data for tau greater than or equal to 10(exp 9) s for diffusion coefficient D(sub LL) = 10(exp -9) L(exp 4)/s, 10(exp -9) L(exp -3)/s, or 10(exp -10) L(exp 4)/s (this particle population may be undergoing nearly loss-free inward radial diffusion). Tau would increase as Jupiter is approached if its value were determined by pitch angle scattering due to EM wave-particle interactions. if the absolute amplitudes of the waves' magnetic fluctuations did not vary with radial distance. Exploration of numerical solutions of the diffusive transport equation for Jupiter's magnetospheric ions at die planetary ring and closer to Jupiter has been done. Explicit range-energy relationships for energy loss in ring matter (SiO2), modeled as a continuous disk, are incorporated. A spatial resolution of approx. 1000 km in the radial direction is used in the vicinity of the main ring; off-equatorial ion fluxes have been included (assuming the atmosphere is a perfect absorber). For protons the maximum effect of energy loss in the microscopic size range of ring particles is expected at energies approx. 0.1 Mev. Presumably there could be sufficiently large, unobserved bodies within the ring that would have to be modeled as discrete objects, as planetary satellites would be. Within limitations of the model and computational resources it's planned to characterize solutions for transport of magnetospheric ions past the planetary ring; the procedures that are used are fairly well known and may be applied generally to the simpler magnetospheric models.

Mihalov, John D.↗

Acceleration of Pd-V intermetallic diffusion by hydrogen

Vanadium-based membranes have great potential for hydrogen purification due to their perfect selectivity, high permeability, and relatively low cost. With appropriate surface cleaning, V efficiently permeates hydrogen at elevated temperature, but performance declines due to its affinity to absorb impurities. Here, the application of palladium thin films maintains a clean surface that catalyzes hydrogen dissociation and recombination. Hydrogen permeation in Pd-V-Pd membranes initially reach theoretical permeability, but declines due to Pd-V interdiffusion. The objective of this work was to quantify the intermetallic diffusion process as a function of temperature and ambient. Pd-V composites were subjected to various annealing treatments and characterized using Auger electron spectroscopy, X-ray diffraction, and energy dispersive X-ray spectroscopy, as well as correlated to measurements of membrane permeability. In an inert environment Pd-V interdiffusion was observable as low as 300 °C, and the diffusion coefficient had an activation energy of 44 kJ/mol. Furthermore, the presence of hydrogen at partial pressures > 10 kPa accelerated interdiffusion six-fold at T = 400 °C. Membrane performance degraded with an activation energy 75 kJ/mol, suggesting that intermetallic diffusion leads to both a loss of catalytic activity and as well as degradation of bulk permeability. These findings provide a baseline for evaluating hydrogen permeable interdiffusion barriers to overcome these challenges.

08 HYDROGEN↗

Bulk and surface diffusion of neodymium in alpha-uranium: Ab initio calculations and kinetic Monte Carlo simulations

A fundamental understanding of lanthanide transport in metallic fuels is critical for high fidelity modeling of the fuel-cladding chemical interaction (FCCI) phenomenon, which can lead to the formation of brittle intermetallic compounds and premature failure of the cladding. Here we report a combined ab initio density functional theory (DFT) and kinetic Monte Carlo (KMC) study of the bulk diffusivity of Nd in α-U, fully taking into account the effect of radiation enhanced diffusion. In this work, the vacancy mechanism is considered to be the dominant mechanism for the bulk diffusion of Nd since a Nd interstitial is found to be intrinsically unstable in α-U. The surface diffusivity of a Nd adatom on α-U (001) surface has been further predicted using KMC simulations parameterized by DFT calculations. The present study suggests that Nd transport via the surface diffusion mechanism can be many orders of magnitude faster than bulk diffusion. Furthermore, the results from the present lower length scale study can be used to inform mesoscale phase-field simulations to determine the effective diffusion coefficient of Nd through α-U with a porous microstructure.

36 MATERIALS SCIENCE↗

Communication: Does force spectroscopy of biomolecules probe their intrinsic dynamic properties?

In single-molecule pulling experiments, the molecule of interest is attached to a much larger object such as an atomic force microscope tip or a micrometer sized bead. The measured dynamics of molecular transitions is therefore affected by the hydrodynamic drag on the pulling instrument itself. By considering the transitions within the combined system (the molecule and the instrument), it is shown here that two distinct physical regimes exist: when the intrinsic stiffness of the molecule is greater than that of the linker connecting the molecule to the pulling setup then the pulling experiment probes the intrinsic dynamics of the molecule with only relatively small (and quantifiable) corrections resulting from the pulling setup. In contrast, when the stiffness of the linker exceeds that of the molecule, the molecular transition in question involves concerted motion of the molecule and the pulling setup and the hydrodynamic drag on the pulling instrument becomes the dominant source of friction along the molecular reaction coordinate. An analytical formula interpolating between these two cases is further derived. These results explain recent conflicting observations where some single-molecule pulling measurements report anomalously low diffusion coefficients along molecular reaction coordinates while others do not.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures of water molecules in carbon nanotubes under electric fields

Carbon nanotubes (CNTs) are promising for water transport through membranes and for use as nano-pumps. The development of CNT-based nanofluidic devices, however, requires a better understanding of the properties of water molecules in CNTs because they can be very different from those in the bulk. Using all-atom molecular dynamics simulations, we investigate the effect of axial electric fields on the structure of water molecules in CNTs having diameters ranging from (7,7) to (10,10). The water dipole moments were aligned parallel to the electric field, which increases the density of water inside the CNTs and forms ordered ice-like structures. The electric field induces the transition from liquid to ice nanotubes in a wide range of CNT diameters. Moreover, we found an increase in the lifetime of hydrogen bonds for water structures in the CNTs. Fast librational motion breaks some hydrogen bonds, but the molecular pairs do not separate and the hydrogen bonds reform. Thus, hydrogen bonds maintain the water structure in the CNTs, and the water molecules move collectively, decreasing the axial diffusion coefficient and permeation rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic properties and solidification kinetics of intermetallic Ni{sub 7}Zr{sub 2} alloy investigated by electrostatic levitation technique and theoretical calculations

The thermodynamic properties, including the density, volume expansion coefficient, ratio of specific heat to emissivity of intermetallic Ni{sub 7}Zr{sub 2} alloy, have been measured using the non-contact electrostatic levitation technique. These properties vary linearly with temperature at solid and liquid states, even down to the obtained maximum undercooling of 317 K. The enthalpy, glass transition, diffusion coefficient, shear viscosity, and surface tension were obtained by using molecular dynamics simulations. Ni{sub 7}Zr{sub 2} has a relatively poor glass forming ability, and the glass transition temperature is determined as 1026 K. The inter-diffusivity of Ni{sub 7}Zr{sub 2} alloy fitted by Vogel–Fulcher–Tammann law yields a fragility parameter of 8.49, which indicates the fragile nature of this alloy. Due to the competition of increased thermodynamic driving force and decreased atomic diffusion, the dendrite growth velocity of Ni{sub 7}Zr{sub 2} compound exhibits double-exponential relationship to the undercooling. The maximum growth velocity is predicted to be 0.45 m s{sup −1} at the undercooling of 335 K. Theoretical analysis reveals that the dendrite growth is a diffusion-controlled process and the atomic diffusion speed is only 2.0 m s{sup −1}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomistic models of Cu diffusion in CuInSe 2 under variations in composition

Here we construct an analytic model for the composition dependence of the vacancy-mediated Cu diffusion coefficient in undoped CuInSe 2 using parameters from density functional theory. The applicability of this model is supported numerically with kinetic lattice Monte Carlo and Onsager transport tensors. We discuss how this model relates to experimental measurements of Cu diffusion, arguing that our results can account for significant contributions to the bulk diffusion of Cu tracers in non-stoichiometric CuInSe 2 .

74 ATOMIC AND MOLECULAR PHYSICS↗

Characteristic properties of macroporous silicon sintering in an argon atmosphere

The temperature and time dependences of the sintering of macroporous silicon in Ar or Ar + 3% H{sub 2} are studied. The contribution of various mechanisms governing this process is determined. The specific features of the sintering of macroporous silicon are examined by means of isochronous and isothermal annealing of the samples with ordered and random macropores in the temperature range 1000–1225°C. It is found that the sintering of macroporous silicon under atmospheric pressure in an inert gas flow containing 2 × 10–4% O{sub 2} is greatly affected by thermal etching. Thermal etching competes with the substance-transfer processes characteristic of sintering and hinders the formation of a defect-free surface crust. The reason for etching consists in that gaseous silicon monoxide is generated and then carried away by the gas flow. The etching effect is dominant in the low-temperature range and is independent of whether H{sub 2} is added. The values obtained for the activation energy of the silicon diffusion coefficient, E{sub a} = 2.57 eV, and for the exponent n = 3.31–3.74 in the time dependence of the pore radius, r ~ t{sup 1/n} are indicative of a mixed substance-transfer mechanism via the surface and volume diffusion of silicon atoms.

36 MATERIALS SCIENCE↗

Multiphysics and Multiscale Modeling of Coupled Transport of Chloride Ions in Concrete

Chloride ions (Cl−)-induced corrosion is one of the main degradation mechanisms in reinforced concrete (RC) structures. In most situations, the degradation initiates with the transport of Cl− from the surface of the concrete towards the reinforcing steel. The accumulation of Cl− at the steel-concrete interface could initiate reinforcement corrosion once a threshold Cl− concentration is achieved. An accurate numerical model of the Cl− transport in concrete is required to predict the corrosion initiation in RC structures. However, existing numerical models lack a representation of the heterogenous concrete microstructure resulting from the varying environmental conditions and the indirect effect of time dependent temperature and relative humidity (RH) on the water adsorption and Cl− binding isotherms. In this study, a numerical model is developed to study the coupled transport of Cl− with heat, RH and oxygen (O2) into the concrete. The modeling of the concrete microstructure is performed using the Virtual Cement and Concrete Testing Laboratory (VCCTL) code developed by the U.S. National Institute of Standards and Technology (NIST). The concept of equivalent maturation time is utilized to eliminate the limitation of simulating concrete microstructure using VCCTL in specific environmental conditions such as adiabatic. Thus, a time-dependent concrete microstructure, which depends on the hydration reactions coupled with the temperature and RH of the environment, is achieved to study the Cl− transport. Additionally, Cl− binding isotherms, which are a function of the pH of the concrete pore solution, Cl− concentration, and weight fraction of mono-sulfate aluminate (AFm) and calcium-silicate-hydrate (C-S-H), obtained from an experimental study by the same authors are utilized to account for the Cl− binding of cement hydration products. The temperature dependent RH diffusion was considered to account for the transport of Cl− with moisture transport. The temperature and RH diffusion in the concrete domain, composite theory, and Cl− binding and water adsorption isotherms are used in combination, to estimate the ensuing Cl− diffusion field within the concrete. The coupled transport process of heat, RH, Cl−, and O2 is implemented in the Multiphysics Object-Oriented Simulation Environment (MOOSE) developed by the U.S. Idaho National Laboratory (INL). The model was verified and validated using data from multiple experimental studies with different concrete mixture proportions, curing durations, and environmental conditions. Additionally, a sensitivity analysis was performed to identify that the water-to-cement (w/c) ratio, the exposure duration, the boundary conditions: temperature, RH, surface Cl− concentration, Cl− diffusion coefficient in the capillary water, and the critical RH are the important parameters that govern the Cl− transport in RC structures. In a case study, the capabilities of the developed numerical model are demonstrated by studying the complex 2D diffusion of Cl− in a RC beam located in two different climatic regions: warm and humid weather in Galveston, Texas, and cold and dry weather in North Minnesota, Minnesota, subjected to time varying temperature, RH, and surface Cl− concentrations.

composite theory↗

Numerical simulation of warm fog and its application to warm fog prediction and modification

The considered theoretical model describes the evolution of potential temperature, water vapor content, liquid water content, and horizontal and vertical winds as determined by the processes of vertical turbulent transfer and horizontal advection for momentum, energy, and moisture, as well as radiation cooling, growth of water droplets based on microphysical processes, and drop sedimentation. The mathematical model is two-dimensional in the X-Z plane. The diffusivity coefficient is the same for liquid water droplets as for vapor. The fundamental equations governing the macrophysical processes of the evolution of wind components, water vapor content, liquid water content, and potential temperature under the influences of vertical turbulent diffusion transfer, turbulent momentum transfer, and turbulent energy transfer are expressed by three sets of conservation equations.

Hung, R. J.↗

Directional Solidification and Characterization of Hg(0.89) Mn(0.11)Te

Two boules of Hg(0.89)Mn(0.11)Te(MMT) were solidified using the vertical Bridgman-Stockbarger method. Translation rates of 0.09 and 0. 18 microns/s were used. The influence of growth rate on axial compositional homogeneity in the MMT boules was evaluated experimentally by conducting precision density measurements on radial slices taken from each boule. In addition, Plane Front Solidification theory and segregation coefficient (k) data for the Hg(1-x)Mn(x)Te system were used to fit theoretical composition profiles to the measured MMT axial composition profiles. The strong correlation between the measured and calculated MMT axial composition profiles indicates diffusion dominated axial solute redistribution in the boules under the applied growth conditions. The analysis of the MMT axial composition profiles by Plane Front Solidification theory allowed the calculation of the effective diffusion coefficient (D(eff) = 3.5 x l0(exp -5) sq cm/s). The k-values for the Hg(1-x)Mn(x)Te system and the D(sub eff) - value were then used to verify that both boules were solidified under conditions which did not exceed the Constitutional Supercooling Criteria under ideal conditions. Finally, a preliminary examination of the radial compositional variation in each MMT was made using Fourier Transform Infra-Red Spectroscopy (FTIR). The radial homogeneity in the MMT boules was found to be comparable for both translation rates.

Price, M. W.↗

TRANSPORT OF SOLAR ENERGETIC PARTICLES ACCELERATED BY ICME SHOCKS: REPRODUCING THE RESERVOIR PHENOMENON

In this work, gradual solar energetic particle (SEP) events observed by multiple spacecraft are investigated with model simulations. Based on a numerical solution of the Fokker-Planck focused transport equation including perpendicular diffusion of particles, we obtained the fluxes of SEPs accelerated by an interplanetary coronal mass ejection driven shock as it propagates outward through the three-dimensional Parker interplanetary magnetic field. The shock is treated as a moving source of energetic particles with an assumed particle distribution function. We look at the time profiles of particle flux as they are observed simultaneously by multiple spacecraft located at different locations. The dependence of particle fluxes on different levels of perpendicular diffusion is determined. The main purpose of our simulation is to reproduce the reservoir phenomenon, during which it is frequently observed that particle fluxes are nearly the same at very different locations in the inner heliosphere, up to 5 AU, during the decay phase of gradual SEP events. The reservoir phenomenon is reproduced in our simulation under a variety of conditions of perpendicular diffusion of particles estimated from the nonlinear guiding center theory (NLGC). As the perpendicular diffusion coefficient increases, the nonuniformity of particle fluxes becomes smaller, making the reservoir phenomenon more prominent. However, if the shock acceleration strength decreases slower than r {sup -2.5} with the radial distance r, the reservoir phenomenon might disappear, with limited perpendicular diffusion constrained by the NLGC theory. Therefore, observation of the reservoir phenomenon in gradual SEP events can be used to test qualitatively theories of particle diffusion and shock acceleration.

79 ASTRONOMY AND ASTROPHYSICS↗