Search NASA⌕ Search

SEARCH · Search NASA

Results for “future accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Metric-affine formalism of higher derivative scalar fields in cosmology

Higher derivative scalar field theories have received considerable attention for the potentially explanations of the initial state of the universe or the current cosmic acceleration which they might offer. They have also attracted many interests in the phenomenological studies of infrared modifications of gravity. These theories are mostly studied by the metric variational approach in which only the metric is the fundamental field to account for the gravitation. In this paper we study the higher derivative scalar fields with the metric-affine formalism where the affine connection is treated arbitrarily at the beginning. Because the higher derivative scalar fields couple to the connection directly in a covariant theory these two formalisms will lead to different results. These differences are suppressed by the powers of the Planck mass and are usually expected to have small effects. But in some cases they may cause non-negligible deviations. We show by a higher derivative dark energy model that the two formalisms lead to significantly different pictures of the future universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Machine Learning-Accelerated First-Principles Molecular Dynamics Explains Anomalous Lattice Thermal Expansion in BaZr 0.78 Y 0.22 O 3-δ

Fuel cells are a vital clean energy technology that converts chemical energy directly into electricity with high efficiency, making them a cornerstone of a sustainable energy future. Herein we investigate the thermal and chemical lattice expansion behavior of hydrated BaZr 0.78 Y 0.22 O 3-δ using machine learning-accelerated ab initio molecular dynamics simulations. Here, our results reproduce the experimentally observed non-monotonic and anomalous temperature dependence of lattice expansion, which we attribute to the competing effects of thermal expansion and dehydration—two mechanisms that influence the lattice expansion in opposite directions. The importance of this work lies in its detailed demonstration of how advanced computational techniques can accurately capture complex environmental effects, providing a valuable framework for modeling similar phenomena in a variety of material systems and applications.

Proton conducting fuel cell↗

Megavoltage Image-Based Dynamic Multileaf Collimator Tracking of a NiTi Stent in Porcine Lungs on a Linear Accelerator

Purpose: To investigate the accuracy and potential limitations of MV image-based dynamic multileaf collimator (DMLC) tracking in a porcine model on a linear accelerator. Methods and Materials: A thermo-expandable NiTi stent designed for kilovoltage (kV) X-ray visualization of lung lesions was inserted into the bronchia of three anaesthetized Goettingen minipigs. A four-dimensional computed tomography scan was used for planning a five-field conformal treatment with circular multileaf collimator (MLC) apertures. A 22.5 Gy single fraction treatment was delivered to the pigs. The peak-to-peak stent motion was 3 to 8 mm, with breathing periods of 1.2 to 4 s. Before treatment, X-ray images were used for image-guided setup based on the stent. During treatment delivery, continuous megavoltage (MV) portal images were acquired at 7.5 Hz. The stent was segmented in the images and used for continuous adaptation of the MLC aperture. Offline, the tracking error in beam's eye view of the treatment beam was calculated for each MV image as the difference between the MLC aperture center and the segmented stent position. The standard deviations of the systematic error {Sigma} and the random error {sigma} were determined and compared with the would-be errors for a nontracking treatment with pretreatment image-guided setup. Results: Reliable stent segmentation was obtained for 11 of 15 fields. Segmentation failures occurred when image contrast was dominated by overlapping anatomical structures (ribs, diaphragm) rather than by the stent, which was designed for kV rather than MV X-ray visibility. For the 11 fields with reliable segmentation, {Sigma} was 0.5 mm/0.4 mm in the two imager directions, whereas {sigma} was 0.5 mm/1.1 mm. Without tracking, {Sigma} and {sigma} would have been 1.7 mm/1.4 mm and 0.8 mm/1.4 mm, respectively. Conclusion: For the first time, in vivo DMLC tracking has been demonstrated on a linear accelerator showing the potential for improved targeting accuracy. The study mimicked the envisioned patient workflow of future patient treatments. Clinical implementation of MV image-based tracking would require markers designed for MV visibility.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The EIC accelerator: design highlights and project status

The design of the electron-ion collider (EIC) at Brookhaven National Laboratory is well underway, aiming at a peak electron-proton luminosity of 10e+34 cm^-1·sec^-1. This high luminosity, the wide center-of-mass energy range from 29 to 141 GeV (e-p) and the high level of polarization require innovative solutions to maximize the performance of the machine, which makes the EIC one of the most challenging accelerator projects to date. The complexity of the EIC will be discussed, and the project status and plans will be presented.

43 PARTICLE ACCELERATORS↗

Exploring the sensitivity of global ocean circulation to future ice loss from Antarctica

The sensitivity of the global ocean circulation and climate to large increases in iceberg calving and meltwater discharges from the Antarctic Ice Sheet (AIS) are rarely studied and poorly understood. The requirement to investigate this topic is heightened by growing evidence that the West Antarctic Ice Sheet (WAIS) is vulnerable to rapid retreat and collapse on multidecadal-to-centennial timescales. Observations collected over the last 30 years indicate that the WAIS is now losing mass at an accelerated and that a collapse may have already begun in the Amundsen Sea sector. In addition, some recent future model simulations of the AIS show the potential for rapid ice sheet retreat in the next 50 – 300 years. Such a collapse would be associated with the discharge of enormous volumes of ice and meltwater to the Southern Ocean. This project funds PI Condron to begin assessing the sensitivity of the global ocean circulation to projected increases in meltwater discharge and iceberg calving from the AIS for the next 50 – 100 years. A series of climate model simulations will determine changes in ocean circulation and temperature at the ice sheet grounding line, the role of mesoscale ocean eddies in mixing and transporting freshwater away from the continent to deep water formation regions, and the likely impact on the northward transport of heat to Europe and North America.

54 ENVIRONMENTAL SCIENCES↗

Extreme Heterogeneity 2018 - Productive Computational Science in the Era of Extreme Heterogeneity: Report for DOE ASCR Workshop on Extreme Heterogeneity

The 2018 Basic Research Needs Workshop on Extreme Heterogeneity identified five Priority Research Directions for realizing the capabilities needed to address the challenges posed in this era of rapid technological change. This report captures the outcomes of that workshop. In the context of extreme heterogeneity, it defines basic research needs and opportunities in computer science research to develop smart and trainable operating and runtime systems, programming environments, and predictive tools that will make future systems easier to adapt to scientists’ computing needs and easier for facilities to deploy securely.

97 MATHEMATICS AND COMPUTING↗

Status of the 16 T Dipole Development Program for a Future Hadron Collider

A next step of energy increase of hadron colliders beyond the LHC requires high-field superconducting magnets capable of providing a dipolar field in the range of 16 T in a 50-mm aperture with accelerator quality. These elements could meet the requirements for an upgrade of the LHC to twice the present beam energy or for a 100-TeV center of mass energy future circular collider. Here, we summarize the activities and plans for the development of these magnets, in particular within the 16 T Magnet Technology Program, the WP5 of the EuroCirCol, and the U.S. Magnet Development Program.

43 PARTICLE ACCELERATORS↗

Up-skilling and Re-skilling for the Nuclear Industry - 17276

In the UK, nuclear skills and qualifications have been the subject of several studies in higher levels of Government, including one by UK Cabinet Office. The newly formed UK Nuclear Skills Strategy Group (NSSG) has been tasked with addressing the current skills and people gaps for the UK nuclear industry. The NSSG is working with several key organisations in the UK: The National Skills Academy for Nuclear, (NSAN), which covers skills interventions, training and workforce development and experience, and the newly forming National College for Nuclear (NCfN) which will become a nuclear qualifications awarding body, regulating educational qualifications and curriculum in the nuclear sector. The NSSG has published its own UK Nuclear Skills Strategy in December 2016, aligned to the UK Cabinet Office study. It is the intent that, in the near future, nuclear qualifications and experience will be directly transferable across different organisations and nuclear sites in the UK, enabling the maintenance of high standards of behaviours and improved mobility throughout the sector. The UK needs to maintain and grow a diverse workforce and nuclear Suitably Qualified and Experienced Personnel (SQEP) people. The 2015 UK Nuclear Labour Market Intelligence (LMI) report, produced by Cogent for the Nuclear Energy Skills Alliance (NESA), concluded that the total nuclear workforce demand for the UK Nuclear Civil and Defence sector needed to grow by 33,000 people in the next five years, which includes replacement and expansion demand. This involved all disciplines and grades, with for example, higher level skilled workers needing to increase by 2200 FTEs every year. The main discipline pinch points were in, for example, Mechanical; Electrical; Project Management; Safety Case Specialists; Commissioning Engineers. Of the overall workforce, around 10% is over 60 years old and around 38% is over 50 years old. Jacobs in the UK is widely involved in many aspects of skills and competence development, with active involvement in local and national training programmes, and driving new methodologies to accelerate our staff's journey to nuclear competence. As well as looking at the immediate future, there is a risk in the UK that, over the 120-year plus clean-up mission, there won't be enough people with the right skills. Jacobs is developing sustainable solutions to this in our skills and development strategy for the nuclear sector. Jacobs has developed a variety of approaches to help us maintain and grow our diverse workforce and nuclear 'SQEP' people. This includes: - Identifying and developing our employees' technical and personal skills and capabilities, particularly the requirements of our millennials in both technical and social aspects of their working lives. - Identifying and planning for our future skills needs to meet our projected business requirements. - Our programme to transfer skilled employees from other sectors into the nuclear industry. - Our extensive school student placement scheme, aligned to the UK's 'Industrial Cadet' scheme, which has helped to bring school-aged students into Jacobs on workplace experience. - Our collaboration with our customers to develop UK national level Trailblazer Apprentice programmes. - Our involvement at a UK national level in the work of the National Skills Academy for Nuclear (NSAN), the Nuclear Energy Skills Alliance (NESA) High Level Skills Committee and the newly forming UK National College for Nuclear (NCfN). - Our work to ensure diversity is valued in our workplace, for example in our involvement in 'Women in Nuclear'. (authors)

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Evaluation of Portable Acceleration Solutions for LArTPC Simulation Using Wire-Cell Toolkit

The Liquid Argon Time Projection Chamber (LArTPC) technology plays an essential role in many current and future neutrino experiments. Accurate and fast simulation is critical to developing efficient analysis algorithms and precise physics model projections. The speed of simulation becomes more important as Deep Learning algorithms are getting more widely used in LArTPC analysis and their training requires a large simulated dataset. Heterogeneous computing is an efficient way to delegate computationally intensive tasks to specialized hardware. However, as the landscape of compute accelerators quickly evolves, it becomes increasingly difficult to manually adapt the code to the latest hardware or software environments. A solution which is portable to multiple hardware architectures without substantially compromising performance would thus be very beneficial, especially for long-term projects such as the LArTPC simulations. In search of a portable, scalable and maintainable software solution for LArTPC simulations, we have started to explore high-level portable programming frameworks that support several hardware backends. In this paper, we present our experience porting the LArTPC simulation code in the Wire-Cell Toolkit to NVIDIA GPUs, first with the CUDA programming model and then with a portable library called Kokkos. Preliminary performance results on NVIDIA V100 GPUs and multi-core CPUs are presented, followed by a discussion of the factors affiecting the performance and plans for future improvements.

Yu, Haiwang↗

High-Performance Reaction Wheel Optimization for Fine-Pointing Space Platforms: Minimizing Induced Vibration Effects on Jitter Performance plus Lessons Learned from Hubble Space Telescope for Current and Future Spacecraft Applications

The Hubble Space Telescope (HST) applies large-diameter optics (2.5-m primary mirror) for diffraction-limited resolution spanning an extended wavelength range (approx. 100-2500 nm). Its Pointing Control System (PCS) Reaction Wheel Assemblies (RWAs), in the Support Systems Module (SSM), acquired an unprecedented set of high-sensitivity Induced Vibration (IV) data for 5 flight-certified RWAs: dwelling at set rotation rates. Focused on 4 key ratios, force and moment harmonic values (in 3 local principal directions) are extracted in the RWA operating range (0-3000 RPM). The IV test data, obtained under ambient lab conditions, are investigated in detail, evaluated, compiled, and curve-fitted; variational trends, core causes, and unforeseen anomalies are addressed. In aggregate, these values constitute a statistically-valid basis to quantify ground test-to-test variations and facilitate extrapolations to on-orbit conditions. Accumulated knowledge of bearing-rotor vibrational sources, corresponding harmonic contributions, and salient elements of IV key variability factors are discussed. An evolved methodology is presented for absolute assessments and relative comparisons of macro-level IV signal magnitude due to micro-level construction-assembly geometric details/imperfections stemming from both electrical drive and primary bearing design parameters. Based upon studies of same-size/similar-design momentum wheels' IV changes, upper estimates due to transitions from ground tests to orbital conditions are derived. Recommended HST RWA choices are discussed relative to system optimization/tradeoffs of Line-Of-Sight (LOS) vector-pointing focal-plane error driven by higher IV transmissibilities through low-damped structural dynamics that stimulate optical elements. Unique analytical disturbance results for orbital HST accelerations are described applicable to microgravity efforts. Conclusions, lessons learned, historical context/insights, and perspectives on future applications are given; these previously unpublished data and findings represents a valuable resource for fine-pointing spacecraft or space-based platforms using RWAs, Control Moment Gyros (CMGs), Momentum Wheels, or other ball-bearing-based rotational units.

Hasha, Martin D.↗

NASA’s Electric Propulsion Development Activities for Space Nuclear Propulsion Applications

Given increased worldwide support for advanced nuclear technology for terrestrial applications, there is a renewed interest in the possibility of nuclear-reactor-powered spacecraft. NASA continues investing in the technology areas necessary to support NASA’s future scientific and exploration goals. One of those technologies areas is electric propulsion, a highly efficient means for in-space propulsion that increases fuel economy by ionizing and accelerating an onboard propellant using spacecraft electrical power. The current NASA portfolio of electric propulsion investments in support of space nuclear applications focuses on a range of future applications with total system power levels of 50 kilowatts to multimegawatt. These investments support a fast-paced incremental rate for technology development advancement to support these applications. Systems at the 50-kilowatt power level can be accomplished today with existing technology and systems at the multimegawatt level will require further technology developments over the coming decade. Propulsion systems based an array of multiple Hall thrusters have been identified the most likely technology option for the near-term applications and systems utilizing lithium-fueled magneto-plasma-dynamic thrusters have been identified as the most promising alternative technology option for the far-term applications at very high-power levels.

Electric Propulsion↗

NASA’s Electric Propulsion Development Activities for Space Nuclear Propulsion Applications

Given increased worldwide support for advanced nuclear technology for terrestrial applications, there is a renewed interest in the possibility of nuclear-reactor-powered spacecraft. NASA continues investing in the technology areas necessary to support NASA’s future scientific and exploration goals. One of those technologies areas is electric propulsion, a highly efficient means for in-space propulsion that increases fuel economy by ionizing and accelerating an onboard propellant using spacecraft electrical power. The current NASA portfolio of electric propulsion investments in support of space nuclear applications focuses on a range of future applications with total system power levels of 50 kilowatts to multimegawatt. These investments support a fast-paced incremental rate for technology development advancement to support these applications. Systems at the 50-kilowatt power level can be accomplished today with existing technology and systems at the multimegawatt level will require further technology developments over the coming decade. Propulsion systems based an array of multiple Hall thrusters have been identified the most likely technology option for the near-term applications and systems utilizing lithium-fueled magneto-plasma-dynamic thrusters have been identified as the most promising alternative technology option for the far-term applications at very high-power levels.

Electric propulsion↗

Universal Electronic‐Structure Relationship Governing Intrinsic Magnetic Properties in Permanent Magnets

An electronic-structure-centered perspective is presented on permanent-magnet (PM) design, highlighting two key levers, that is, saturation magnetization (M s ), governed by 3d-band filling and exchange physics, and magnetocrystalline anisotropy energy (MAE), arising from spin-orbit coupling (SOC) on anisotropic orbital populations. Reviewing current practices, including DFT-based MAE/J ij extraction, atomistic-spin and micromagnetic modeling, and high-throughput machine learning (ML) pipelines, three bottlenecks limiting predictive discovery is identified that is i) electronic-structure accuracy for small MAE (sensitive to functional choice, Hubbard U, and many-body effects), ii) finite-temperature and kinetic realism (phonon/magnon renormalization, ordering kinetics), and iii) descriptor and multiscale decoupling (lack of SOC-weighted and orbital-resolved fingerprints). Deep dives into the electronic-structure of Nd─Fe─B and Fe─N show how these fingerprints govern magnetic performance, motivating DFT- and quantum-mechanics-based descriptors for discovery. Unbiased, structure-driven exploration, coupled with high-throughput simulations, ML, generative AI, and reasoning models, accelerates candidate identification and propagates insights across scales. Addressing supply-chain risks, on future needs of designing “critical-element-free” magnets with tailored microstructure and high energy products is emphasized. By integrating electronic fingerprints, AI reasoning, and multiscale modeling, a practical roadmap is provided for rare-earth-lean or rare-earth free, high-performance, sustainable PMs.

Singh, Prashant [Ames Laboratory, and Iowa State U↗

Development of an optimized and scalable method for isolation of umbilical cord blood-derived small extracellular vesicles for future clinical use

Abstract Extracellular vesicles (EV) are a promising therapeutic tool in regenerative medicine. These particles were shown to accelerate wound healing, through delivery of regenerative mediators, such as microRNAs. Herein we describe an optimized and upscalable process for the isolation of EV smaller than 200 nm (sEV), secreted by umbilical cord blood mononuclear cells (UCB-MNC) under ischemic conditions and propose quality control thresholds for the isolated vesicles, based on the thorough characterization of their protein, lipid and RNA content. Ultrafiltration and size exclusion chromatography (UF/SEC) optimized methodology proved superior to traditional ultracentrifugation (UC), regarding production time, standardization, scalability, and vesicle yield. Using UF/SEC, we were able to recover approximately 400 times more sEV per mL of media than with UC, and upscaling this process further increases EV yield by about 3-fold. UF/SEC-isolated sEV display many of the sEV/exosomes classical markers and are enriched in molecules with anti-inflammatory and regenerative capacity, such as hemopexin and miR-150. Accordingly, treatment with sEV promotes angiogenesis and extracellular matrix remodeling, in vitro. In vivo, UCB-MNC-sEV significantly accelerate skin regeneration in a mouse model of delayed wound healing. The proposed isolation protocol constitutes a significant improvement compared to UC, the gold-standard in the field. Isolated sEV maintain their regenerative properties, whereas downstream contaminants are minimized. The use of UF/SEC allows for the standardization and upscalability required for mass production of sEV to be used in a clinical setting.

Cardoso, Renato M. S.↗

I-BEAT: Ultrasonic method for online measurement of the energy distribution of a single ion bunch

The shape of a wave carries all information about the spatial and temporal structure of its source, given that the medium and its properties are known. Most modern imaging methods seek to utilize this nature of waves originating from Huygens' principle. We discuss the retrieval of the complete kinetic energy distribution from the acoustic trace that is recorded when a short ion bunch deposits its energy in water. This novel method, which we refer to as Ion-Bunch Energy Acoustic Tracing (I-BEAT), is a refinement of the ionoacoustic approach. With its capability of completely monitoring a single, focused proton bunch with prompt readout and high repetition rate, I-BEAT is a promising approach to meet future requirements of experiments and applications in the field of laser-based ion acceleration. We demonstrate its functionality at two laser-driven ion sources for quantitative online determination of the kinetic energy distribution in the focus of single proton bunches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

3D printed optimized electrodes for electrochemical flow reactors

Recent advances in 3D printing have enabled the manufacture of porous electrodes which cannot be machined using traditional methods. With micron-scale precision, the pore structure of an electrode can now be designed for optimal energy efficiency, and a 3D printed electrode is not limited to a single uniform porosity. As these electrodes scale in size, however, the total number of possible pore designs can be intractable; choosing an appropriate pore distribution manually can be a complex task. To address this challenge, we adopt an inverse design approach. Using physics-based models, the electrode structure is optimized to minimize power losses in a flow reactor. The computer-generated structure is then printed and benchmarked against homogeneous porosity electrodes. We show how an optimized electrode decreases the power requirements by 16% compared to the best-case homogeneous porosity. Future work could apply this approach to flow batteries, electrolyzers, and fuel cells to accelerate their design and implementation.

25 ENERGY STORAGE↗

RF Breakdown in Magnetic Fields: Previous Work, Recent Theory, and Future Plans

Recent experiments on the breakdown of rf cavities revealed severe surface damage and a reduction of the maximum accelerating gradient after operation in an external magnetic field. This finding implies the possibility of serious problems for cooling lattices wherein rf cavities and external magnetic fields coexist, such as those of the proposed neutrino factory and muon collider. An experimental program that could study those problems and their possible solutions is discussed. Emphasis is given to a magnetically insulated cavity design in which the walls are parallel to the magnetic field lines and consequently damage from field emission is expected to be suppressed.

43 PARTICLE ACCELERATORS↗

Finite-element-based simulations of electrodes for CO 2 cascade reduction reactions

The multielectron reduction of CO 2 to liquid fuels could be a path to scalable energy storage, but reaching this goal requires major advances in catalysis and systems engineering. Cascade catalysis, which couples sequential reactions without isolating intermediates, has emerged as a promising route to enhance selectivity and efficiency in CO 2 reduction (CO 2 R). In this review, we examine how finite-element-based simulations of continuum model [finite element method (FEM)] approaches are being used to analyze and guide CO 2 R cascade systems. We first outline the fundamentals of cascade catalysis and recent advances in catalytic materials (metallic, molecular, and hybrid architectures). We then focus on FEM developments at the electrode and device scales, emphasizing how these models capture transport phenomena, local microenvironments, and geometry-dependent effects. To clarify design principles, we present case studies of cascade electrodes organized in systems without and with integrated semiconductors. We further emphasize the integration of FEM with multiscale frameworks (density functional theory, molecular dynamics, kinetic Monte Carlo) and its role in bridging atomic-level insights with device-level performance. Finally, we identify current limitations and future prospects, including improved boundary conditions, coupling with operando experiments, and machine learning-accelerated model development. Together, these insights provide design principles for next-generation CO 2 R cascade systems for efficient solar fuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗