Search NASA⌕ Search

SEARCH · Search NASA

Results for “graphitic structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

One-pot synthesis of porous g-C3N4 nanomaterials with different morphologies and their superior photocatalytic performance

Highlights: • g-C{sub 3}N{sub 4}, liking a yolk-shell cake, was prepared. • The shell region is porous nanosheets and the yolk region is hollow particles. • The surface area and pore volume of two types of g-C{sub 3}N{sub 4} could be controlled. • The as-prepared porous g-C{sub 3}N{sub 4} nanomaterials exhibit improved photocatalytic activity. - Abstract: Graphitic carbon nitride (g-C{sub 3}N{sub 4}), liking a yolk-shell cake, was successfully prepared via a gas-bubble template method with the assistance of NH{sub 4}Cl. In this special structure, the shell region consists of numerous thin sheets with rich porosity, while the yolk region consists of a lot of cross-linked large hollow particles. The formation mechanism of yolk-shell structure was investigated via adjusting the mass ratio of NH{sub 4}Cl to melamine, and calcination temperature. The surface area and pore volume of the two types of porous g-C{sub 3}N{sub 4} nanomaterials significantly depend on the mass ratio of NH{sub 4}Cl to melamine in a certain extent. The as-prepared porous g-C{sub 3}N{sub 4} nanomaterials exhibit improved photocatalytic activity compared to bulk g-C{sub 3}N{sub 4}. Moreover, the porous thin sheets in shell region possess larger specific surface area, higher light utilization, higher charge separation and transfer efficiency, than the hollow particles in yolk region, leading to the superior photocatalytic performance. We believe that this simple, economical, and nontoxic approach for the preparation of g-C{sub 3}N{sub 4} nanomaterials opens new possibilities for scalable synthesis of g-C{sub 3}N{sub 4}-based materials with more controllable structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of Interface-Driven Tunable Bandgap Metal Oxides

Mixed bandgap and bandgap tunability in semiconductors is critical in expanding their use. Composition altera-tions through single-crystal epitaxial growth and formation of multi-layer tandem structures are often employed to achieve mixed bandgaps albeit with limited tunability. In this study, self-assembled one-dimensional coordination polymers provide a fac-ile synthon and template for graphitic C-doped mesoporous oxides, gC-β-Ga 2 O 3 or gC-In 2 O 3 via controlled oxidative ligand ablation. These materials have mixed bandgaps, and colors, depending on amount of gC present. The carbon-oxide interface leads to induced gap states, hence, a stoichiometrically tunable band structure. Structurally, a multi-scale porous network percolating throughout the material is realized. The nature of heat-treatment and top-down process allows for facile tunabil-ity and formation of mixed bandgap metal oxides through controlled carbon deposition. As a proof of concept, gC-β-Ga 2 O 3 was utilized as a photocatalyst for CO 2 reduction, which demonstrated excellent selectivity and conversion rates into CH 4 and CO.

36 MATERIALS SCIENCE↗

Trapping state of hydrogen isotopes in carbon and graphite investigated by thermal desorption spectrometry

Thermal desorption spectrometry (TDS) has been investigated to obtain fundamental information of tritium behavior in graphite and carbon materials especially at high temperatures. 29 brands of graphite, HOPG, glassy carbon and CFC materials charged with deuterium gas are tested up to the temperature of 1735 K with a heating rate of 0.1 K/s. TDS spectra have five peaks at 600-700 K, around 900 K, 1200 K, 1300-1450 K and 1600-1650 K. The amounts of released deuterium have been compared with crystallographic parameters derived from XRD analysis. The results can be summarized as follows. First, TDS spectra of deuterium were quite varied among the samples tested, such as existence of peaks, peak temperatures and release amounts of deuterium. Secondly, TDS spectra may consist of five peaks, which are peak 1 (600-700 K), peak 2 (around 900 K), peak 3 (around 1200 K), peak 4 (1300-1450 K) and peak 5 (1600-1650 K). Thirdly, the correlations between the estimated surface area of edge surface and the total amount of released deuterium could be observed for peaks 4 and 5. Fourthly, high energy trapping site (peak 5) may exist even at edge surface or a near surface region, not only for intercalary. And fifth, in order to obtain the lower tritium retention for graphite and CFC materials, the material should be composed of a filler grain with a smaller crystallite size or having the smaller net edge surface in its structure. It is shown that heat treatment does not reduce originally existing trapping sites but trapping sites generated by neutron irradiation for instance can be reduced in some degree.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Graphene–Titanium Interfaces from Molecular Dynamics Simulations

Unraveling the physical and chemical properties of graphene–metal contacts is a key step toward the development of graphitic electronic nanodevices. Although many studies have revealed the way that various metals interact with graphene, few have described the structure and behavior of large pieces of graphene–metal nanostructures under different conditions. In this paper, we present the first classical molecular dynamics study of graphene–titanium (G–Ti) structures, with and without substrates. Physical and chemical properties of equilibrium structures of G–Ti interfaces with different amounts of titanium coverage are investigated. Adhesion of Ti films on graphene is shown to be enhanced by the vacancies in graphene or the electrostatic influence of substrates. The dynamics of pristine G–Ti structures at different temperatures on planar and nonplanar substrates are investigated, and the results show that G–Ti interfaces are thermally stable, that is, not prone to any reaction toward the formation of titanium carbide.

36 MATERIALS SCIENCE↗

Carbon reaction and diffusion on Ni(111), Ni(100), and Fe(110): Kinetic parameters from x-ray photoelectron spectroscopy and density functional theory analysis

This paper investigates the reactivity of elemental carbon films deposited from the vapor phase with Fe and Ni substrates at room temperature. X-ray photoelectron spectroscopy (XPS) measurements are presented as a method for evaluating kinetic reaction data. Carbon films are deposited on different surface orientations representing geometries from a dense atom packing as in fcc (111) to an open surface structure as in fcc (100). During annealing experiments several reactions are observed (carbon subsurface diffusion, carbide formation, carbide decomposition, and graphite ordering). These reactions and the respective kinetic parameters are analyzed and quantified by XPS measurements performed while annealing at elevated temperatures (620-820 K). The resulting activation barriers for carbon subsurface diffusion are compared with calculated values using the density functional theory. The determined kinetic parameters are used to reproduce the thermal behavior of carbon films on nickel surfaces.

36 MATERIALS SCIENCE↗

Electrical transport properties of (BN)-rich hexagonal (BN)C semiconductor alloys

The layer structured hexagonal boron nitride carbon semiconductor alloys, h-(BN)C, offer the unique abilities of bandgap engineering (from 0 for graphite to ∼6.4 eV for h-BN) and electrical conductivity control (from semi-metal for graphite to insulator for undoped h-BN) through alloying and have the potential to complement III-nitride wide bandgap semiconductors and carbon based nanostructured materials. Epilayers of (BN)-rich h-(BN){sub 1-x}(C{sub 2}){sub x} alloys were synthesized by metal-organic chemical vapor deposition (MOCVD) on (0001) sapphire substrates. Hall-effect measurements revealed that homogeneous (BN)-rich h-(BN){sub 1-x}(C{sub 2}){sub x} alloys are naturally n-type. For alloys with x = 0.032, an electron mobility of about 20 cm{sup 2}/Vs at 650 °K was measured. X-ray photoelectron spectroscopy (XPS) was used to determine the chemical composition and analyze chemical bonding states. Both composition and chemical bonding analysis confirm the formation of alloys. XPS results indicate that the carbon concentration in the alloys increases almost linearly with the flow rate of the carbon precursor (propane (C{sub 3}H{sub 8})) employed during the epilayer growth. XPS chemical bonding analysis showed that these MOCVD grown alloys possess more C-N bonds than C-B bonds, which possibly renders the undoped h-(BN){sub 1-x}(C{sub 2}){sub x} alloys n-type and corroborates the Hall-effect measurement results.

36 MATERIALS SCIENCE↗

Interaction between water and carbon nanostructures: How good are current density functional approximations?

Due to their current and future technological applications, including realization of water filters and desalination membranes, water adsorption on graphitic sp2-bonded carbon is of overwhelming interest. However, these systems are notoriously challenging to model, even for electronic structure methods such as density functional theory (DFT), because of the crucial role played by London dispersion forces and noncovalent interactions, in general. Recent efforts have established reference quality interactions of several carbon nanostructures interacting with water. Here, we compile a new benchmark set (dubbed WaC18), which includes a single water molecule interacting with a broad range of carbon structures and various bulk (3D) and two-dimensional (2D) ice polymorphs. The performance of 28 approaches, including semilocal exchange-correlation functionals, nonlocal (Fock) exchange contributions, and long-range van der Waals (vdW) treatments, is tested by computing the deviations from the reference interaction energies. The calculated mean absolute deviations on the WaC18 set depend crucially on the DFT approach, ranging from 135 meV for local density approximation (LDA) to 12 meV for PBE0-D4. We find that modern vdW corrections to DFT significantly improve over their precursors. Within the 28 tested approaches, we identify the best performing within the functional classes of generalized gradient approximated (GGA), meta-GGA, vdW-DF, and hybrid DF, which are BLYP-D4, TPSS-D4, rev-vdW-DF2, and PBE0-D4, respectively.

Brandenburg, Jan Gerit (ORCID:0000000292192948)↗

Interfacial engineering of phthalocyanine molecules on graphitic and metal substrates

Metal porphyrin and phthalocyanine have found variety of applications in catalysis, electronic and spintronic devices and photovoltaic cells, many of which rely on accurate position of the molecules and alignment of their electronic levels with respect to the substrate. The substrate and local environment affect significantly the electronic properties of these macrocyclic molecules. Computational simulations provide valuable insights for engineering the molecule–metal, molecule–molecule and molecule–ligand interfaces. In this review, we focus on adsorption of metal phthalocyanine, particularly iron phthalocyanine, on graphite, epitaxial graphene, and metal substrates. Furthermore, these systems show varied interfacial binding strength and chameleon-like molecular electronic structures. Spin of the molecules can be controlled by small ligands, and the ground state can be tuned between S = 1, S = 1/2 and S = 0. Inclusion of van der Waals interaction in the first-principles calculations is shown to be essential for accurate description of the interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heating experiments of the Tagish Lake meteorite: Investigation of the effects of short-term heating on chondritic organics

We present in this study the effects of short-term heating on organics in the Tagish Lake meteorite and how the difference in the heating conditions can modify the organic matter (OM) in a way that complicates the interpretation of a parent body's heating extent with common cosmothermometers. The kinetics of short-term heating and its influence on the organic structure are not well understood, and any study of OM is further complicated by the complex alteration processes of the thermally metamorphosed carbonaceous chondrites—potential analogues of the target asteroid Ryugu of the Hayabusa2 mission—which had experienced posthydration, short-duration local heating. In an attempt to understand the effects of short-term heating on chondritic OM, we investigated the change in the OM contents of the experimentally heated Tagish Lake meteorite samples using Raman spectroscopy, scanning transmission X-ray microscopy utilizing X-ray absorption near edge structure spectroscopy, and ultraperformance liquid chromatography fluorescence detection and quadrupole time of flight hybrid mass spectrometry. Our experiment suggests that graphitization of OM did not take place despite the samples being heated to 900 °C for 96 h, as the OM maturity trend was influenced by the heating conditions, kinetics, and the nature of the OM precursor, such as the presence of abundant oxygenated moieties. Although both the intensity of the 1s-σ* exciton cannot be used to accurately interpret the peak metamorphic temperature of the experimentally heated Tagish Lake sample, the Raman graphite band widths of the heated products significantly differ from that of chondritic OM modified by long-term internal heating.

Chan, Queenie H. S.↗

Application of composite materials to turbofan engine fan exit guide vanes

A program was conducted by NASA with the JT9D engine manufacturer to develop a lightweight, cost effective, composite material fan exit guide vane design having satisfactory structural durability for commerical engine use. Based on the results of a previous company supported program, eight graphite/epoxy and graphite-glass/epoxy guide vane designs were evaluated and four were selected for fabrication and testing. Two commercial fabricators each fabricated 13 vanes. Fatigue tests were used to qualify the selected design configurations under nominally dry, 38 C (100 F) and fully wet and 60 C (140 F) environmental conditions. Cost estimates for a production rate of 1000 vanes per month ranged from 1.7 to 2.6 times the cost of an all aluminum vane. This cost is 50 to 80 percent less than the initial program target cost ratio which was 3 times the cost of an aluminum vane. Application to the JT9D commercial engine is projected to provide a weight savings of 236 N (53 lb) per engine.

Smith, G. T.↗

Nodal Diffusion Burnable Poison Treatment for Prismatic Reactor Cores

The prismatic block version of the High Temperature Reactor (HTR) considered as a candidate Very High Temperature Reactor (VHTR)design may use burnable poison pins in locations at some corners of the fuel blocks (i.e., assembly equivalent structures). The presence of any highly absorbing materials, such as these burnable poisons, within fuel blocks for hexagonal geometry, graphite-moderated High Temperature Reactors (HTRs) causes a local inter-block flux depression that most nodal diffusion-based method have failed to properly model or otherwise represent. The location of these burnable poisons near vertices results in an asymmetry in the morphology of the assemblies (or blocks). Hence the resulting inadequacy of traditional homogenization methods, as these “spread” the actually local effect of the burnable poisons throughout the assembly. Furthermore, the actual effect of the burnable poison is primarily local with influence in its immediate vicinity, which happens to include a small region within the same assembly as well as similar regions in the adjacent assemblies. Traditional homogenization methods miss this artifact entirely. This paper presents a novel method for treating the local effect of the burnable poison explicitly in the context of a modern nodal method.

97 MATHEMATICS AND COMPUTING↗

Improvements to the Modeling of the TREAT Reactor and Experiments

This paper summarizes the latest improvements and lessons learned from the modeling and simulation of the transient test reactor at Idaho National Laboratory using the MAM- MOTH reactor physics application. MAMMOTH is a MOOSE-based, Finite Element Method application that specializes in the analysis of the spatial dynamics behavior of nuclear reactors. Since early 2018 several transient tests have been conducted at TREAT, thus providing the opportunity to apply and benchmark modern modeling and simulation tools. MAMMOTH was used to provide predictions of the power coupling factor between the core and the experiment for various experiments. Even though the power coupling factor predictions agree very well with the experimental data, within the bounds of the experimental uncertainty, one shortcoming was the underprediction of the total energy deposited in the core and in the experiment. Determination of the sources for this discrepancy are ongoing, but several key problems have been identified and resolved, thus providing valuable insights for future research. This paper discusses several of these lessons learned. First, the heat capacity data for the TREAT fuel has some significant problems due to limitations of the measurement techniques used circa 1960s. The sensitivity of the peak power and the total energy deposition to various representations of the heat capacity is approximately 5%. Second, the effects of the biological shield and thermal column on the modeling of the core are non-negligible, since they affect the mean generation time and the effective reflection of neutrons back into the core, which is suspected to be important during the core heat up. Matching the reactor period resolves the fact that the reduced spatial domain used in the MAMMOTH model underpredicts the mean generation time. The neutron reflection from these regions is marginally improved with the use of an albedo boundary condition. Third, modeling of the control rod movement with a multi-scheme method is introduced and its current limitations are exposed. Fourth, we explore the effects of using a homogenized model with Superhomogenization equivalence and how that differs from fully heterogeneous simulations. Finally, the energy condensation effects for this graphite core are significant. Solutions with 10 and 26 energy groups show the benefits of using a finer coarse group structure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Large change of interlayer vibrational coupling with stacking in Mo 1-x W x Te 2

Stacking variations in quasi-two-dimensional materials can have an important influence on material properties, such as changing the topology of the band structure. Unfortunately, the weakness of van der Waals (vdW) interactions makes it difficult to compute the stacking dependence of properties, and even in a material as simple as graphite the stacking energetics remain unclear. Mo 1 - x W x Te 2 is a material in which three differently stacked phases are conveniently accessible by temperature changes: 1 T ' , T d * , and the reported Weyl semimetal phase T d . Additionally, the transitions proceed via layer sliding, and the corresponding interlayer shear mode (ISM) is relevant not just for the stacking energetics but also for understanding the relationship between Weyl physics and structural changes. However, the interlayer interactions of Mo 1 - x W x Te 2 are not well understood, with wide variation in computed properties. We report inelastic neutron scattering of the ISM in a Mo 0.91 W 0.09 Te 2 crystal. The ISM energies are generally consistent with the linear chain model, as expected given the weak interlayer interaction, though there are some discrepancies from predicted intensities. However, the interlayer force constants K x in the T d * and 1 T ' phases are substantially weaker than that of T d at 75(3) and 83(3)%, respectively. Considering that the relative positioning of atoms in neighboring layers is approximately the same regardless of overall stacking, our results suggest that longer-range influences, such as stacking-induced electronic band-structure changes, may be responsible for the substantial change in the interlayer vibrational coupling and thus the C 55 elastic constant. These findings should elucidate the stacking energetics of Mo 1 - x W x Te 2 and other vdW layered materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mn versus Al in Layered Oxide Cathodes in Lithium-Ion Batteries: A Comprehensive Evaluation on Long-Term Cyclability

Nickel-rich layered oxide cathodes with the composition LiNi 1-x-y Co x Mn y O 2 (NCM, (1-x-y) ≥ 0.6) are under intense scrutiny recently to contend with commercial LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) for high-energy-density batteries for electric vehicles. However, a comprehensive assessment of their electrochemical durability is currently lacking. Herein, two in-house cathodes, LiNi 0.8 Co 0.15 Al 0.05 O 2 and LiNi 0.7 Co 0.15 Mn 0.15 O 2 , are investigated in a high-voltage graphite full cell over 1500 charge-discharge cycles (≈5–10 year service life in vehicles). Despite a lower nickel content, NCM shows more performance deterioration than NCA. Critical underlying degradation processes, including chemical, structural, and mechanical aspects, are analyzed via an arsenal of characterization techniques. Overall, Mn substitution appears far less effective than Al in suppressing active mass dissolution and irreversible phase transitions of the layered oxide cathodes. The active mass dissolution (and crossover) accelerates capacity decline with sustained parasitic reactions on the graphite anode, while the phase transitions are primarily responsible for cell resistance increase and voltage fade. With Al doping, on the other hand, secondary particle pulverization is the more limiting factor for long-term cyclability compared to Mn. Finally, these results establish a fundamental guideline for designing high-performing Ni-rich NCM cathodes as a compelling alternative to NCA and other compositions for electric vehicle applications.

25 ENERGY STORAGE↗

Erosion Coatings for High-Temperature Polymer Composites: A Collaborative Project With Allison Advanced Development Company

The advantages of replacing metals in aircraft turbine engines with high-temperature polymer matrix composites (PMC's) include weight savings accompanied by strength improvements, reduced part count, and lower manufacturing costs. Successfully integrating high-temperature PMC's into turbine engines requires several long-term characteristics. Resistance to surface erosion is one rarely reported property of PMC's in engine applications because PMC's are generally softer than metals and their erosion resistance suffers. Airflow rates in stationary turbine engine components typically exceed 2.3 kg/sec at elevated temperatures and pressures. In engine applications, as shown in the following photos, the survivability of PMC components is clearly a concern, especially when engine and component life-cycle requirements become longer. Although very few publications regarding the performance of erosion coatings on PMC's are available particularly in high-temperature applications the use of erosion-resistant coatings to significantly reduce wear on metallic substrates is well documented. In this study initiated by the NASA Glenn Research Center at Lewis Field, a low-cost (less than $140/kg) graphite-fiber-reinforced T650 35/PMR 15 sheet-molding compound was investigated with various coatings. This sheet-molding compound has been compression molded into many structurally complicated components, such as shrouds for gas turbine inlet housings and gearboxes. Erosion coatings developed for PMC s in this study consisted of a two-layered system: a bondcoat sprayed onto a cleaned PMC surface, followed by an erosion-resistant, hard topcoat sprayed onto the bondcoat as shown in following photomicrograph. Six erosion coating systems were evaluated for their ability to withstand harsh thermal cycles, erosion resistance (ASTM G76 83 "Standard Practice for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets") using Al2O3, and adhesion to the graphite fiber polyimide composite (ASTM D 4541 95 "Pull Off Strength of Coatings"). Glenn and Allison Advanced Development Company collaborated to optimize erosion coatings for gas turbine fan and compressor applications. All the coating systems survived aggressive thermal cycling without spalling. During erosion tests (see the final photo), the most promising coating systems tested had Cr3C2-NiCr and WC-Co as the hard topcoats. In all cases, these coating systems performed significantly better than that with a TiN hard topcoat. When material depth (thickness) loss is considered, the Cr3C2-NiCr and WC-Co coating systems provided, on average, an erosion resistance 8.5 times greater than that for the uncoated PMR 15/T650 35 composite. Similarly, Cr3C2-NiCr and WC-Co coating systems adhered to the PMC substrate during tensile tests significantly better than systems containing a TiN topcoat. Differences in topcoats of Cr3C2-NiCr and WC-Co were determined by considering issues such as cost and environmental impact. The preferred erosion-resistant coating system for PMR 15/T650 35 has WC-Co as the hard topcoat. This system provides the following benefits in comparison to the coating system with Cr3C2-NiCr topcoat: lower powder material cost (15 to 20 percent), environmentally friendly materials (Cr3C2-NiCr is hazardous), and higher deposition yield (10 to 15 percent), which results in less waste.

Sutter, James K.↗

Electrohydrodynamic-assisted Assembly of Hierarchically Structured, 3D Crumpled Nanostructures for Efficient Solar Conversions

The tantalizing prospect of harnessing the unique properties of graphene crumpled nanostructures continues to fuel tremendous interest in energy storage and harvesting applications. However, the paper ball-like, hard texture, and closed-sphere morphology of current 3D graphitic nanostructure production not only constricts the conductive pathways but also limits the accessible surface area. Here, we report new insights into electrohydrodynamically-generated droplets as colloidal nanoreactors in that the stimuli-responsive nature of reduced graphene oxide can lead to the formation of crumpled nanostructures with a combination of open structures and doubly curved, saddle-shaped edges. In particular, the crumpled nanostructures dynamically adapt to non-spherical, polyhedral shapes under continuous deposition, ultimately assembling into foam-like microstructures with a highly accessible surface area and spatially interconnected transport pathways. The implementation of such crumpled nanostructures as three-dimensional rear contacts for solar conversion applications realize benefits of a high aspect ratio, electrically addressable and energetically favorable interfaces, and substantial enhancement of both short-circuit currents and fill-factors compared to those made of planar graphene counterparts. Further, the 3D crumpled nanostructures may shed lights onto the development of effective electrocatalytic electrodes due to their open structure that simultaneously allows for efficient water flow and hydrogen escape.

25 ENERGY STORAGE↗