Search NASA⌕ Search

SEARCH · Search NASA

Results for “graphitized”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Seeding Iron Trifluoride Nanoparticles on Reduced Graphite Oxide for Lithium-Ion Batteries with Enhanced Loading and Stability

Development of electric vehicles and portable electronic devices during the past decade calls for lithium-ion batteries (LIBs) with enhanced energy density and higher stability. Integration of FeF 3 phases and carbon structures leads to promising cathode materials for LIBs with high voltage, capacity, and power. In this study, FeF 3 ·0.33H 2 O nanoparticles were synthesized on reduced graphite oxide (rGO) nanosheets using an in situ approach. By chemically tuning the interfacial bonding between FeF 3 ·0.33H 2 O and rGO, we successfully achieved high particle loading and enhanced cycling stability. Specifically, a discharge capacity of ~208.3 mAh g –1 was observed at a current density of 0.5 C. The FeF 3 ·0.33H 2 O/rGO nanocomposites also demonstrate great cycle capability with a reversible discharge capacity of 133.1 mAh g –1 after 100 cycles at 100 mA g –1 ; the capacity retention is about 97%. Furthermore, this study provides an alternative strategy to further improve the stability and performance of iron fluoride/carbon nanocomposite materials for LIB applications.

25 ENERGY STORAGE↗

Quantifying Graphite Solid-Electrolyte Interphase Chemistry and its Impact on Fast Charging

The solid-electrolyte interphase (SEI) enables the remarkable capacity retention of lithium-ion batteries, yet a comprehensive quantitative description of the SEI composition remains elusive. Using a combination of differential electrochemical mass spectrometry and mass spectrometry titration, we quantify graphite SEI components formed under electrolytes of varying salt concentrations. We find that, regardless of salt concentration, a conversion of initially deposited lithium ethylene dicarbonate to monocarbonates (likely lithium ethylene monocarbonate) and noncarbonate species occurs, and the extent of this conversion increases with electrolyte aging. Here, we additionally demonstrate that as the concentration increases (up to 2.0 M LiPF6), the SEI becomes progressively thinner with more LiF and less solid carbonates deposited. Finally, we reveal that less dead lithium formation and less solid carbonate deposition occur during prolonged fast charging for higher-concentration electrolytes. Because of the advantages imparted by a thinner SEI, the onset state of charge for lithium plating for the 2.0 M electrolyte is later than that predicted by a standard electrochemical model, underscoring the importance of explicit SEI effects in future electrochemical models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Nanocrystalline Graphite from Lignin Sources

Carbon composites are attractive to a variety of high-impact applications, such as carbon fibers, batteries, and vehicle parts, due to their multifunctional properties. The properties of carbon are highly dependent on the allotrope the carbon takes and the functionality, impurities, and defects contained within the structure. The increase in demand for sustainable carbon sources in energy storage devices motivates interest in understanding synthesis parameters of lignin value-added products. Also, as the dependence on oil for fuel decreases, alternative sources for carbon in many applications will be needed. In this work, the thermochemical conversion of lignin powders from different feedstocks was evaluated via small and wide-angle X-ray scattering techniques to resolve the amorphous, disordered, and crystalline domains present in the lignin carbons. Scattering analyses indicated an evolution of hierarchical structures along with an increase in ordered domains as a function of carbonization temperature. Qualitative and quantitative methods were used to describe isotropic scattering intensity profiles at multiple length scales. The use of power law models in the mesoscopic region served as the basis to describe morphological changes related to structural features, for example, graphene stacking, degree of roughness, and surface fractals. Kraft softwood and switchgrass produced carbon powder with the most crystalline domains and the least surface roughness. Softwoods reached the highest degree of crystallinity followed by switchgrass samples and had less variability in particle sizes. These results suggest lignin carbons extracted from softwoods and switchgrass are viable substitutes for graphite. Interpretation of X-ray scattering data from lignin carbon powders elucidates feedstock- and processing-dependent morphological features across multiple length scales providing a straightforward framework to evaluate the feasibility of leveraging lignin carbons for producing tunable application-specific materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of graphite under room-temperature compression and decompression

Recently, sophisticated theoretical computational studies have proposed several new crystal structures of carbon (e.g., bct-C{sub 4}, H-, M-, R-, S-, W-, and Z-carbon). However, until now, there lacked experimental evidence to verify the predicted high-pressure structures for cold-compressed elemental carbon at least up to 50 GPa. Here we present direct experimental evidence that this enigmatic high-pressure structure is currently only consistent with M-carbon, one of the proposed carbon structures. Furthermore, we show that this phase transition is extremely sluggish, which led to the observed broad x-ray diffraction peaks in previous studies and hindered the proper identification of the post-graphite phase in cold-compressed carbon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Benchmarking of HEU Mental Annuli Critical Assemblies with Internally Reflected Graphite Cylinder

Three experimental configurations of critical assemblies, performed in 1963 at the Oak Ridge Critical Experiment Facility, which are assembled using three different diameter HEU annuli (15-9 inches, 15-7 inches and 13-7 inches) metal annuli with internally reflected graphite cylinder are evaluated and benchmarked. The experimental uncertainties which are 0.00055, 0.00055 and 0.00055 respectively, and biases to the detailed benchmark models which are -0.00179, -0.00189 and -0.00114 respectively, were determined, and the experimental benchmark keff results were obtained for both detailed and simplified model. The calculation results for both detailed and simplified models using MCNP6-1.0 and ENDF VII.1 agree well to the benchmark experimental results with a difference of less than 0.2%. These are acceptable benchmark experiments for inclusion in the ICSBEP Handbook.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nanocrystalline graphite: Promising material for high current field emission cathodes

Electron field emission properties of nanocrystalline graphite (NCG) films, grown by plasma enhanced chemical vapor deposition method on conductive Si substrates without using of any catalyst, were investigated. Current-voltage characteristics were measured in pulse-periodic regime. It was shown that grown NCG films can operate at field emission current density up to 10 A/cm{sup 2}. It was found that NCG films contain, along with the normally oriented to the substrate nanoflakes, carbon whiskers consisted of graphene nanoribbons and nanowires with length considerably higher than of the nanoflakes.

36 MATERIALS SCIENCE↗

Au nanoparticles on graphitic petal arrays for surface-enhanced Raman spectroscopy

We report a unique substrate for surface-enhanced Raman scattering (SERS) based on Au nanoparticle-decorated, thin graphitic petals. The petals were grown on Si substrates by microwave plasma chemical vapor deposition without catalyst, followed by Au nanoparticle decoration on the oxygen plasma-treated petals by electrodeposition. The substrates possess high surface area and sharp nanoscale features that enable high SERS sensitivity to detect 1x10{sup -7} M rhodamine 6G in methanol solution. The obtained SERS enhancement is comparable to the best values reported in the literature and is determined to result from high surface area and increased density of Au nanoparticles on the petal surfaces.

36 MATERIALS SCIENCE↗

Characterization of Vacancy Defects in Carbon Ion Irradiated Graphite Using Positrons

Highly Oriented Pyrolytic Graphite samples are irradiated with 200 keV Carbon ions to fluences of 10{sup 14} and 10{sup 15} C{sup +} ions/cm{sup 2}. Depth resolved Doppler lineshape S-parameter exhibited large increase in peak damage regions of the sample, indicating the existence of irradiation induced vacancy defects. The depth profile of the defect region has been deduced from the analysis of the experimental data. It is found that divacancies are the dominant defects in the irradiated samples.

36 MATERIALS SCIENCE↗

Amorphous Interface Layer in Thin Graphite Films Grown on the Carbon Face of SiC

Cross-sectional transmission electron microscopy (TEM) is used to characterize an amorphous layer observed at the interface in graphite and graphene films grown via thermal decomposition of C-face 4H-SiC. The amorphous layer does not cover the entire interface, but uniform contiguous regions span microns of cross-sectional interface. Scanning transmission electron microscopy (STEM) images and electron energy loss spectroscopy (EELS) demonstrate that the amorphous layer is a carbon-rich composition of Si/C. The amorphous layer is clearly observed in samples grown at 1600 C for a range of growth pressures in argon, but not at 1500 C, suggesting a temperature-dependent formation mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of a graphite polarization analyzer for resonant inelastic x-ray scattering

Resonant inelastic x-ray scattering (RIXS) is a powerful technique for studying electronic excitations in correlated electron systems. Current RIXS spectrometers measure the changes in energy and momentum of the photons scattered by the sample. A powerful extension of the RIXS technique is the measurement of the polarization state of the scattered photons which contains information about the symmetry of the excitations. This long-desired addition has been elusive because of significant technical challenges. This paper reports the development of a new diffraction-based polarization analyzer which discriminates between linear polarization components of the scattered photons. The double concave surface of the polarization analyzer was designed as a good compromise between energy resolution and throughput. Such a device was fabricated using highly oriented pyrolytic graphite for measurements at the Cu K-edge incident energy. Preliminary measurements on a CuGeO{sub 3} sample are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spatio-temporal mapping of ablated species in ultrafast laser-produced graphite plasmas

We studied the spatial and temporal distributions of ionic, neutral, and molecular species generated by femtosecond laser produced plasma under varying ambient nitrogen gas pressures. Plasmas were generated by irradiating planar graphite targets using 40 fs pulses of 800 nm radiation from a Ti:Sapphire laser. The results show that in the presence of an ambient gas, the molecular species spatial extension and lifetime are directly correlated to the evolution of excited ions. The present studies also provide valuable insights into the evolution history of various species and their excitation during ultrafast laser ablation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photonically excited electron emission from modified graphitic nanopetal arrays

Efficient electron emission for energy conversion requires a low work function and a stable emitter material. The work function of graphene-based carbon materials can decrease significantly by intercalation with alkali metals, thus increasing their emission current. In this work, electron emission from potassium-intercalated carbon nanosheet extensions grown on electrode graphite is investigated. These petal-like structures, composed of 5-25 layers of graphene, are synthesized using microwave plasma chemical vapor deposition. Samples are intercalated with potassium, and a hemispherical energy analyzer is used to measure the emission intensity caused by both thermal and photonic excitation. The emission from the potassium-intercalated structures is found to consistently decrease the work function by 2.4 to 2.8 eV relative to non-intercalated samples. High emission intensity induced by photonic excitation from a solar simulator, with a narrow electron energy distribution relative to established theory, suggests that electron scattering decreases emitted electron energy as compared to surface photoemission. A modified photoemission theory is applied to account for electron scattering, and the sample work function and mean number of scattering events are used as parameters to fit theory to experimental data. The thermal stability of the intercalated nanopetals is investigated, and after an initial heating and cooling cycle, the samples are stable at low temperatures.

36 MATERIALS SCIENCE↗

Absolute cross section for loss of supercoiled topology induced by 10 eV electrons in highly uniform /DNA/1,3-diaminopropane films deposited on highly ordered pyrolitic graphite

It was recently shown that the affinity of doubly charged, 1-3 diaminopropane (Dap{sup 2+}) for DNA permits the growth on highly ordered pyrolitic graphite (HOPG) substrates, of plasmid DNA films, of known uniform thickness [O. Boulanouar, A. Khatyr, G. Herlem, F. Palmino, L. Sanche, and M. Fromm, J. Phys. Chem. C 115, 21291–21298 (2011)]. Post-irradiation analysis by electrophoresis of such targets confirms that electron impact at 10 eV produces a maximum in the yield of single strand breaks that can be associated with the formation of a DNA{sup −} transient anion. Using a well-adapted deterministic survival model for the variation of electron damage with fluence and film thickness, we have determined an absolute cross section for strand-break damage by 10 eV electrons and inelastic scattering attenuation length in DNA-Dap complex films.

36 MATERIALS SCIENCE↗

Chemical sputtering of graphite by low temperature nitrogen plasmas at various substrate temperatures and ion flux densities

We report measurements of chemical sputtering yields of graphite exposed to low temperature nitrogen plasmas. The influence of surface temperature and incoming ion energy on the sputtering yields has been investigated in two distinct ion flux density regimes. Sputtering yields grow consistently with increasing temperatures in experiments with low flux density (Γ{sub i}≈10{sup 20} m{sup −2}s{sup −1}−10{sup 21} m{sup −2}s{sup −1}) and high flux density (Γ{sub i}≈10{sup 23} m{sup −2}s{sup −1}). Moreover, empirical fitting of the data suggests that the temperature of 670 °C is optimal for chemical sputtering at high flux density. Negative biasing of the samples was used to vary the ion energy in the low flux density regime. The sputtering yield in this case increases from 0.07 atoms/ion for E{sub i} = 1.5 eV to 0.19 atoms/ion for E{sub i} = 35 eV. After taking into account the dependence of the yields on temperature and ion energy, we evidenced a flux dependence of sputtering, similar to that found for chemical sputtering of carbon by hydrogen.

36 MATERIALS SCIENCE↗

Low-energy D{sup +} and H{sup +} ion irradiation effects on highly oriented pyrolytic graphite

We have investigated the low-energy (100 eV) D{sup +} and H{sup +} ion irradiation effects on the structural and chemical properties of highly oriented pyrolytic graphite (HOPG). Structural disorder due to the ion irradiation was identified by the Raman spectroscopy, the D{sup +} irradiation giving rise to greater structural disorder than the H{sup +} irradiation. Only sp{sup 2} bonding was identified in the X-ray photoemission spectroscopy of the D{sup +}-irradiated HOPG, indicating no change in the surface chemical structure. The H{sup +} irradiation, on the other hand, gave rise to sp{sup 3} bonding and π−π{sup *} transition, the sp{sup 3} bonding increasing with increasing irradiation dose. It is thus shown that the chemical properties of the HOPG surface may be sensitively modified by the low-energy H{sup +} ion irradiation, but not by the low-energy D{sup +} ion irradiation.

36 MATERIALS SCIENCE↗

The coherent interlayer resistance of a single, rotated interface between two stacks of AB graphite

The coherent, interlayer resistance of a misoriented, rotated interface between two stacks of AB graphite is determined for a variety of misorientation angles. The quantum-resistance of the ideal AB stack is on the order of 1 to 10 mΩ μm{sup 2}. For small rotation angles, the coherent interlayer resistance exponentially approaches the ideal quantum resistance at energies away from the charge neutrality point. Over a range of intermediate angles, the resistance increases exponentially with cell size for minimum size unit cells. Larger cell sizes, of similar angles, may not follow this trend. The energy dependence of the interlayer transmission is described.

36 MATERIALS SCIENCE↗