Search NASA⌕ Search

SEARCH · Search NASA

Results for “grid stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

A dimensionality reducing model for distributed filtering.

An approach is made to filtering of two-dimensional steady-state problems based on the notion of nearest neighbor interaction, i.e., at a given point in the spatial grid, the value at the variable of interest can be assumed to depend only on the values at adjacent grid points. It is shown that for linear steady-state problems significant dimensionality reductions can be accomplished. It was possible to achieve the desired results using a small amount of computer time and without getting into stability difficulties.

Angel, E.↗

Short-Term Frequency Response of a DFIG-Based Wind Turbine Generator for Rapid Frequency Stabilization

This paper proposes a short-term frequency-response scheme of a doubly-fed induction generator (DFIG)-based wind turbine generator (WTG) for improving rotor speed recovery and frequency nadir. In the energy-releasing period, to improve the frequency nadir and rotor speed convergence by releasing a large amount of kinetic energy stored in the rotating masses in a DFIG-based WTG, the power reference is increased up to the torque limit referred to the power and reduces along with it for a predefined period which is determined based on the occurrence time of the frequency nadir in a power grid. Then, the reference decreases so that the rotor speed is forced to be converged to the preset value in the stable operating region of the rotor speed. In the energy-absorbing period, to quickly recover the rotor speed, the reference smoothly decreases with the rotor speed and time during a predefined period until it intersects with the maximum power point tracking curve. The simulation results demonstrate that the proposed scheme successfully achieves rapid frequency stabilization with the improved frequency nadir under various wind conditions based on the IEEE 14-bus system.

17 WIND ENERGY↗

Internal Domains of Natural Porous Media Revealed: Critical Locations for Transport, Storage, and Chemical Reaction

Internal pore domains exist within rocks, lithic fragments, subsurface sediments and soil aggregates. These domains, which we term internal domains in porous media (IDPM), contain a significant fraction of their porosity as nanopores, dominate the reactive surface area of diverse porous media types, and are important locations for chemical reactivity and hydrocarbon storage. Traditionally difficult to interrogate, advances in instrumentation and imaging methods are providing new insights on the physical structures and chemical attributes of IDPM. In this review we: discuss analytical methods to characterize IDPM, evaluate what has been learned about their size distributions, connectivity, and extended structures; determine whether they exhibit unique chemical reactivity; and assess potential for their inclusion in reactive transport models. Three key findings are noteworthy. 1) A combination of methods now allows complete characterization of the porosity spectrum of natural materials and its connectivity; while imaging microscopies are providing three dimensional representations of the interconnected pore network. 2) Chemical reactivity in pores <10 nm is expected to be different from micro and macropores, yet research performed to date is inconclusive on the nature, direction, and magnitude of effect. 3) Existing continuum reactive transport models treat IDPM as a sub-grid feature with average, empirical, scale-dependent parameters; and are not formulated to include detailed information on pore networks. Overall we find that IDPM are key features controlling hydrocarbon release from shales in hydrofracking systems, organic matter stabilization and recalcitrance in soil, weathering and soil formation, and long term inorganic and organic contaminant behavior in the vadose zone and groundwater. We conclude with an assessment of impactful research opportunities to advance understanding of IDPM, and to incorporate their important effects in reactive transport models for improved environmental simulation and prediction.

58 GEOSCIENCES↗

Mechanically Robust, Sodium-Ion Conducting Membranes for Nonaqueous Redox Flow Batteries

Sodium-based batteries are promising for grid-storage applications because of significantly lower cost compared to lithium-based systems. The advancement of solid-state and redox-flow sodium-ion batteries requires sodium-ion exchange membranes with high conductivity, electrochemical stability, and mechanical robustness. This study demonstrates that membranes based on poly(ethylene oxide) (PEO) can meet these requirements. Membranes plasticized with tetraethylene glycol dimethyl ether (TEGDME) achieve high ionic conductivity. Plasticized PEO membranes containing sodium triflate salt (NaTFS) show about 2 orders of magnitude higher conductivity compared to nonplasticized PEO membranes. Results from vibrational spectroscopy and differential scanning calorimetry describe the coordination chemistry in these multiphase materials and explain the mechanisms behind the increased conductivity. The mechanical properties of the membranes improve by addition of 5 wt % sodium carboxymethyl cellulose (CMC) without compromising the conductivity or electrochemical stability against sodium metal. In conclusion, the optimized membrane is an excellent candidate for low-cost energy storage systems that operate over a wide voltage window near ambient temperature.

25 ENERGY STORAGE↗

Model predictive control for voltage restoration in microgrids using temporal logic specifications

Power system operation will encounter numerous voltage variabilities as the proliferation of renewable energy continues. Real-time monitoring and communication technologies can potentially improve voltage stability by enabling the rapid detection of voltage deviations and the implementation of corrective actions. These corrective actions will only be effective in restoring stability if they are chosen in a timely and scalable manner. This paper considers the problem of power systems’ load voltage control in order to simultaneously address both magnitude and time voltage specifications. In order to comply with grid codes and avoid unnecessary relay protection actions, a model predictive control (MPC)-based control strategy employing temporal logic specifications (TLSs) is proposed. The TLSs strategy is introduced as a formalism to control the voltage variation at a critical load bus against operational bounds over time. The control objective is to schedule optimal control input signals from the available supportive energy storage systems, which provide reactive power injections, leading to satisfying the specified finite-time restoration described by the TLSs with minimal control efforts. The simulation results display that the TLSs strategy for power systems’ voltage control synthesis is extremely significant.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Copper Electrode on Flexible Substrate by Intense Pulsed Light Sintering of Microsized Copper Particles

Metal electrodes deposited in a grid pattern onto flexible polymer substrates have been shown to be a viable alternative to replace indium tin oxide (ITO) as the transparent anode for organic photovoltaics. copper may be a better alternative in terms of cost and stability for large area low-cost solar modules, specifically on roll-to-roll platforms. These customized electrode patterns can be fabricated from copper nanoparticles through various printing techniques applicable to solution phase processing. The Intense Pulsed Light (IPL) technique has been used to sinter copper nanoparticles (~100nm) to fabricate conductive copper electrodes on flexible polymer substrates. However, compared to nanosized (~100 nm) copper particles, microsized (~2 um) copper is much cheaper. In this work, microsized (~2 um) copper is used to produce high conductive copper inks. The conductivity of the print can be adjusted through the use of surfactant. IPL sintering was optimized to obtain high conductivity copper films. In conclusion, several microscopic and electrical spectroscopic characterization techniques such as scanning electron microscopy (SEM), x-ray diffraction (XRD), 4-point probe resistivity measurements were employed to characterize the copper electrodes.

14 SOLAR ENERGY↗

FREQUENCY REGULATION WITH CONNECTED LIGHTING SYSTEMS

The management of end-use energy resources, e.g., commercial buildings, has been investigated as a promising source of services for the electric power grid. Lighting consumes about 17% electricity of U.S. commercial buildings; however, it may contribute significantly to services that improve the reliability and resilience of the grid due to its rapid speed of response. Connected lighting systems (CLS), which build upon solid-state lamp technology, can change their power demand more quickly than most other building electricity end uses. But the potential of CLS to provide grid services has not been considerably investigated. In this paper, we describe initial research to evaluate the potential of CLS for the grid service of frequency regulation. Frequency regulation is a reliability product that corrects in a matter of seconds for short-term changes in the balance between supply and demand in the balancing area that might affect the stability of the power system. Frequency regulation signals for a medium office building are generated from the normalized test signals for the PJM Interconnection Reg-A and Reg-D regulations services. Control of the CLS locally to follow the Reg-A or Reg-D signal is used to provide contributions to the corresponding frequency regulation service. The performance of CLS for frequency regulation is evaluated using the PJM 40-Minute Performance Score Template. The performance scores obtained for all CLS categories for both Reg-A and Reg-D signals far exceed the minimum score for the qualification, a very promising result for CLS to provide frequency regulation service.

Wang, Peng↗

Evaluation of a CFD Method for Aerodynamic Database Development using the Hyper-X Stack Configuration

A computational fluid dynamic (CFD) study is performed on the Hyper-X (X-43A) Launch Vehicle stack configuration in support of the aerodynamic database generation in the transonic to hypersonic flow regime. The main aim of the study is the evaluation of a CFD method that can be used to support aerodynamic database development for similar future configurations. The CFD method uses the NASA Langley Research Center developed TetrUSS software, which is based on tetrahedral, unstructured grids. The Navier-Stokes computational method is first evaluated against a set of wind tunnel test data to gain confidence in the code s application to hypersonic Mach number flows. The evaluation includes comparison of the longitudinal stability derivatives on the complete stack configuration (which includes the X-43A/Hyper-X Research Vehicle, the launch vehicle and an adapter connecting the two), detailed surface pressure distributions at selected locations on the stack body and component (rudder, elevons) forces and moments. The CFD method is further used to predict the stack aerodynamic performance at flow conditions where no experimental data is available as well as for component loads for mechanical design and aero-elastic analyses. An excellent match between the computed and the test data over a range of flow conditions provides a computational tool that may be used for future similar hypersonic configurations with confidence.

Parikh, Paresh↗

Adding power of artificial intelligence to situational awareness of large interconnections dominated by inverter‐based resources

Abstract Large‐scale power systems exhibit more complex dynamics due to the increasing integration of inverter‐based resources (IBRs). Therefore, there is an urgent need to enhance the situational awareness capability for better monitoring and control of power grids dominated by IBRs. As a pioneering Wide‐Area Measurement System, FNET/GridEye has developed and implemented various advanced applications based on the collected synchrophasor measurements to enhance the situational awareness capability of large‐scale power grids. This study provides an overview of the latest progress of FNET/GridEye. The sensors, communication, and data servers are upgraded to handle ultra‐high density synchrophasor and point‐on‐wave data to monitor system dynamics with more details. More importantly, several artificial intelligence (AI)‐based advanced applications are introduced, including AI‐based inertia estimation, AI‐based disturbance size and location estimation, AI‐based system stability assessment, and AI‐based data authentication.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Coalescence kinetics in surfactant stabilized emulsions: Evolution equations from direct numerical simulations

Lattice Boltzmann simulations were used to study the coalescence kinetics in emulsions with amphiphilic surfactant, under neutrally buoyant conditions, and with a significant kinematic viscosity contrast between the phases (emulating water in oil emulsions). The 3D simulation domain was large enough (256 3rd power -- 10 7th power grid points) to obtain good statistics with droplet numbers ranging from a few thousand at early times to a few hundred near equilibrium. Increased surfactant contents slowed down the coalescence rate between droplets due to the Gibbs-Marangoni effect, and the coalescence was driven by a quasi-turbulent velocity field. The kinetic energy decayed at a relatively slow rate at early times, due to conversion of interfacial energy to kinetic energy in the flow during coalescence. Phenomenological, coupled differential equations for the mean droplet diameter D(t) and the number density nd(t) were obtained from the simulation data and from film draining theories. Local (in time) power law exponents for the growth of the mean diameter (and for the concomitant decrease of nd) were established in terms of the instantaneous values of the kinetic energy, coalescence probability, Gibbs elasticity, and interfacial area. The model studies indicated that true power laws for the growth of the droplet size and decrease of the number of droplets with time may not be justified, since the exponents derived using the phenomenological model were time dependent. In contrast to earlier simulation results for symmetric blends with surfactant, we found no evidence for stretched logarithmic scaling of the formD -- [ln (ct)]a for the morphology length, or exponential scalings associated with arrested growth, on the basis of the phenomenological model.

58 GEOSCIENCES↗

A robust and efficient finite volume method for compressible inviscid and viscous two-phase flows [A robust and efficient finite volume method for compressible viscous two-phase flows]

A robust and efficient density-based finite volume method is developed for solving the six-equation single pressure system of two-phase flows at all speeds on hybrid unstructured grids. Unlike conventional approaches where an expensive exact Riemann solver is normally required for computing numerical fluxes at the two-phase interfaces in addition to AUSM-type fluxes for single-phase interfaces in order to maintain stability and robustness in cases involving interactions of strong pressure and void-fraction discontinuities, a volume-fraction coupling term for the AUSM + -up fluxes is introduced in this work to impart the required robustness without the need of the exact Riemann solver. The resulting method is significantly less expensive in regions where otherwise the Riemann solver would be invoked. A transformation from conservative variables to primitive variables is presented and the primitive variables are then solved in the implicit method in order for the current finite volume method to be able to solve, effectively and efficiently, low Mach number flows in traditional multiphase applications, which otherwise is a great challenge for the standard density-based algorithms. Here, a number of benchmark test cases are presented to assess the performance and robustness of the developed finite volume method for both inviscid and viscous two-phase flow problems. The numerical results indicate that the current density-based method provides an attractive and viable alternative to its pressure-based counterpart for compressible two-phase flows at all speeds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rechargeable metal-metal alkaline batteries: Recent advances, current issues and future research strategies

Over the past few decades, remarkable advancement has been attained in the field of rechargeable metal–metal alkaline batteries (RABs). In terms of safety, energy density, charge-discharge capacity, and long-term storage capability, metal-metal RABs (e.g., Ni–Zn, Ni–Fe, Ni–Bi, Ni–MH, Ag–Zn, Co–Zn, Cu–Zn, and Bi–Zn systems) are contemplated as the promising energy storage devices for the applications in electric vehicles (EVs), hybrid EVs, grid-scale energy storage, as well as various implantable and wearable electronic devices. Especially, Ni-MH batteries become competitive with Li-ion batteries for EVs and hybrid EVs applications due to their high tolerance against mechanical abuse, stability under wide temperature ranges, and considerable charge/discharge capacity. Meanwhile, earlier works reviewed only specific topics, so, as a rapidly growing research topic, providing a deep understanding on metal–metal RABs is timely and worthwhile. So here, in this work, we discuss the electrochemistry of all metal-metal RABs, then full cell designing with their performance will be discussed thoroughly. Further, issues associated with the existing metal–metal RABs and corresponding improvement approaches will be provided for future advances in high-performance and reliable metal-metal RABs.

25 ENERGY STORAGE↗

Investigations on caesium-free alternatives for H{sup −} formation at ion source relevant parameters

Negative hydrogen ions are efficiently produced in ion sources by the application of caesium. Due to a thereby induced lowering of the work function of a converter surface a direct conversion of impinging hydrogen atoms and positive ions into negative ions is maintained. However, due to the complex caesium chemistry and dynamics a long-term behaviour is inherent for the application of caesium that affects the stability and reliability of negative ion sources. To overcome these drawbacks caesium-free alternatives for efficient negative ion formation are investigated at the flexible laboratory setup HOMER (HOMogenous Electron cyclotron Resonance plasma). By the usage of a meshed grid the tandem principle is applied allowing for investigations on material induced negative ion formation under plasma parameters relevant for ion source operation. The effect of different sample materials on the ratio of the negative ion density to the electron density n{sub H{sup −}} /n{sub e} is compared to the effect of a stainless steel reference sample and investigated by means of laser photodetachment in a pressure range from 0.3 to 3 Pa. For the stainless steel sample no surface induced effect on the negative ion density is present and the measured negative ion densities are resulting from pure volume formation and destruction processes. In a first step the dependency of n{sub H{sup −}} /n{sub e} on the sample distance has been investigated for a caesiated stainless steel sample. At a distance of 0.5 cm at 0.3 Pa the density ratio is 3 times enhanced compared to the reference sample confirming the surface production of negative ions. In contrast for the caesium-free material samples, tantalum and tungsten, the same dependency on pressure and distance n{sub H{sup −}} /n{sub e} like for the stainless steel reference sample were obtained within the error margins: A density ratio of around 14.5% is measured at 4.5 cm sample distance and 0.3 Pa, linearly decreasing with decreasing distance to 7% at 1.5 cm. Thus, tantalum and tungsten do not significantly affect the negative ion density. First measurements conducted with LaB{sub 6} as well as with two types of diamond like carbon (DLC) n{sub H{sup −}} /n{sub e} of about 15% at 1 Pa were measured, which is comparable to the density ratio obtained for the stainless steel reference sample. At HOMER a surface induced enhancement of n{sub H{sup −}} is only observed when it exceeds the volume formation of H{sup −} which is also realistic for negative hydrogen ion sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Grid-Forming Storage Networks: Analytical Characterization of Damping and Design Insights

Grid-forming storage resources are critical to the operation of power grids with high renewable penetration. Over the years, there has been considerable emphasis on understanding the benefits these inverter-based storage resources bring towards managing volatility and enhancing grid reliability but little is studied about the supplementary advantages latent in their operation. This paper investigates one such application in which we explore the impact of grid-forming distributed storage in damping low-frequency inter-area oscillations. We present a detailed analysis characterizing the impact of inverter-droop and storage size on the slower eigenvalues, highlighting potential design considerations for enhancing system stability.

Chatterjee, Kaustav [BATTELLE (PACIFIC NW LAB)] (O↗

Status Report on Modelling and Simulation Capabilities for Nuclear-Renewable Hybrid Energy Systems

This report summarizes the current status of the modeling and simulation capabilities developed for the economic assessment of Nuclear-Renewable Hybrid Energy Systems (N-R HES). The increasing penetration of variable renewables is altering the profile of the net demand, with which the other generators on the grid have to cope. N-R HES analyses are being conducted to determine the potential feasibility of mitigating the resultant volatility in the net electricity demand by adding industrial processes that utilize either thermal or electrical energy as stabilizing loads. This coordination of energy generators and users is proposed to mitigate the increase in electricity cost and cost volatility through the production of a saleable commodity. Overall, the financial performance of a system that is comprised of peaking units (i.e. gas turbine), baseload supply (i.e. nuclear power plant), and an industrial process (e.g. hydrogen plant) should be optimized under the constraint of satisfying an electricity demand profile with a certain level of variable renewable (wind) penetration. The optimization should entail both the sizing of the components/subsystems that comprise the system and the optimal dispatch strategy (output at any given moment in time from the different subsystems). Some of the capabilities here described have been reported separately in [1, 2, 3]. The purpose of this report is to provide an update on the improvement and extension of those capabilities and to illustrate their integrated application in the economic assessment of N-R HES.

97 MATHEMATICS AND COMPUTING↗

Resilience Evaluation of Demand Response as Spinning Reserve under Cyber-Physical Threats

In the future, automated demand response mechanisms will be used as spinning reserve. Demand response in the smart grid must be resilient to cyber-physical threats. In this paper, we evaluate the resilience of demand response when used as spinning reserve in the presence of cyber-physical threats. We quantify this evaluation by correlating the stability of the system in the presence of attacks measured by system frequency (Hz) and attack level measured by the amount of load (MW) that responds to the demand response event. The results demonstrate the importance of anticipating the dependability of demand response before it can be relied upon as spinning reserve.

AlMajali, Anas (ORCID:000000024031670X)↗

Three-dimensional viscous-flow computations using a directionally hybrid implicit-explicit procedure

A new, directionally dependent, hybrid numerical algorithm for solving the unsteady, three-dimensional Navier-Stokes equations has been developed and used to compute the viscous supersonic flow over complex configurations, which may generate local regions of embedded subsonic or streamwise separated flows or both. The new hybrid implicit-explicit algorithm is derived from the more general implicit Beam-Warming algorithm and is particularly suitable for viscous computations in which the grid spacing in the direction outward from the body is considerably smaller than the spacing in the other two directions. Numerical results obtained from both the hybrid and implicit schemes are presented and compared on the basis of numerical stability, convergence history, and computer and core memory requirements.

Rizk, Y. M.↗

Use of finite volume schemes for transition simulation

The use of finite-volume methods in the study of spatially and temporally evolving transitional flows over a flat plate is investigated. Schemes are developed with both central and upwind differencing. The compressible Navier-Stokes equations are solved with a Runge-Kutta time stepping scheme. Disturbances are determined using linear theory and superimposed at the inflow boundary. Time accurate integration is then used to allow temporal and spatial disturbance evolution. Characteristic-based boundary conditions are employed. The requirements of using finite-volume algorithms are studied in detail. Special emphasis is placed on difference schemes, grid resolution, and disturbance amplitudes. Moreover, comparisons are made with linear theory for small amplitude disturbances. Both subsonic and supersonic flows are considered, and it is shown that the locations of branch 1 and branch 2 of the neutral stability curve are well predicted, given sufficient resolution.

Fenno, Charles C., Jr.↗