Search NASA⌕ Search

SEARCH · Search NASA

Results for “implosion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

One-dimensional magnetohydrodynamics of a cylindrical liner imploded by an azimuthal magnetic field and compressing an axial field

The one-dimensional magnetohydrodynamics of a plasma cylindrical liner is addressed in the case of a two components magnetic field. The azimuthal component is responsible for the implosion of the liner and the axial field is compressed inside the liner. A complete set of analytical profiles for the magnetic field components, the density, and the local velocity are proposed at the scale of the liner thickness. Numerical simulations are also presented to test the validity of the analytical formulas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ab initio determination of the instability growth rate of warm dense beryllium-deuterium interface

Accurate knowledge about the interfacial unstable growth is of great importance in inertial confinement fusion. During implosions, the deuterium-tritium capsule is driven by laser beams or X-rays to access the strongly coupled and partially degenerated warm dense matter regime. At this stage, the effects of dissipative processes, such as diffusion and viscosity, have significant impact on the instability growth rates. Here, we present ab initio molecular dynamics simulations to determine the equations of state and the transport coefficients. Several models are used to estimate the reduction in the growth rate dispersion curves of Rayleigh-Taylor and Richtmyer-Meshkov instabilities with considering the presence of these dissipative effects. We show that these instability growth rates are effectively reduced when considering diffusion. The findings provide significant insights into the microscopic mechanism of the instability growth at the ablator-fuel interface and will refine the models used in the laser-driven hydrodynamic instability experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron spectra from beam-target reactions in dense Z-pinches

The energy spectrum of neutrons emitted by a range of deuterium and deuterium-tritium Z-pinch devices is investigated computationally using a hybrid kinetic-MHD model. 3D MHD simulations are used to model the implosion, stagnation, and break-up of dense plasma focus devices at currents of 70 kA, 500 kA, and 2 MA and also a 15 MA gas puff. Instabilities in the MHD simulations generate large electric and magnetic fields, which accelerate ions during the stagnation and break-up phases. A kinetic model is used to calculate the trajectories of these ions and the neutron spectra produced due to the interaction of these ions with the background plasma. It is found that these beam-target neutron spectra are sensitive to the electric and magnetic fields at stagnation resulting in significant differences in the spectra emitted by each device. Most notably, magnetization of the accelerated ions causes the beam-target spectra to be isotropic for the gas puff simulations. It is also shown that beam-target spectra can have a peak intensity located at a lower energy than the peak intensity of a thermonuclear spectrum. A number of other differences in the shapes of beam-target and thermonuclear spectra are also observed for each device. Finally, significant differences between the shapes of beam-target DD and DT neutron spectra, due to differences in the reaction cross-sections, are illustrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Convergence of shock waves generated by underwater electrical explosion of cylindrical wire arrays between different boundary geometries

The results of experiments and numerical simulations of a shock wave propagating between either conical or parabolic bounding walls are presented. The shock wave was generated by a microsecond timescale underwater electrical explosion of a cylindrical wire array supplied by a current pulse having an amplitude of ∼230 kA and a rise time of ∼1 μs. It is shown that with the same energy density deposition into the exploding wire array, the shock wave converges faster between parabolic walls, and as a result, the pressure in the vicinity of convergence is ∼2.3 times higher than in the case of conical walls. The results obtained are compared to those of earlier experiments [Antonov et al., Appl. Phys. Lett. 102, 124104 (2013)] with explosions of spherical wire arrays. It is shown that at a distance of ∼400 μm from the implosion origin the pressure obtained in the current experiments is higher than for the case of spherical wire arrays.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterisation of the current switch mechanism in two-stage wire array Z-pinches

In this paper, we describe the operation of a two-stage wire array z-pinch driven by the 1.4 MA, 240 ns rise-time Magpie pulsed-power device at Imperial College London. In this setup, an inverse wire array acts as a fast current switch, delivering a current pre-pulse into a cylindrical load wire array, before rapidly switching the majority of the generator current into the load after a 100–150 ns dwell time. A detailed analysis of the evolution of the load array during the pre-pulse is presented. Measurements of the load resistivity and energy deposition suggest significant bulk heating of the array mass occurs. The ∼5 kA pre-pulse delivers ∼0.8 J of energy to the load, leaving it in a mixed, predominantly liquid-vapour state. The main current switch occurs as the inverse array begins to explode and plasma expands into the load region. Electrical and imaging diagnostics indicate that the main current switch may evolve in part as a plasma flow switch, driven by the expansion of a magnetic cavity and plasma bubble along the length of the load array. Analysis of implosion trajectories suggests that approximately 1 MA switches into the load in 100 ns, corresponding to a doubling of the generator dI/dt. Potential scaling of the device to higher current machines is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser absorption, power transfer, and radiation symmetry during the first shock of inertial confinement fusion gas-filled hohlraum experiments

Temporally resolved measurements of the hohlraum radiation flux asymmetry incident onto a bismuth coated surrogate capsule have been made over the first two nanoseconds of ignition relevant laser pulses. Specifically, we study the P2 asymmetry of the incoming flux as a function of cone fraction, defined as the inner-to-total laser beam power ratio, for a variety of hohlraums with different scales and gas fills. This work was performed to understand the relevance of recent experiments, conducted in new reduced-scale neopentane gas filled hohlraums, to full scale helium filled ignition targets. Experimental measurements, matched by 3D view factor calculations, are used to infer differences in symmetry, relative beam absorption, and cross beam energy transfer (CBET), employing an analytic model. Despite differences in hohlraum dimensions and gas fill, as well as in laser beam pointing and power, we find that laser absorption, CBET, and the cone fraction, at which a symmetric flux is achieved, are similar to within 25% between experiments conducted in the reduced and full scale hohlraums. This work demonstrates a close surrogacy in the dynamics during the first shock between reduced-scale and full scale implosion experiments and is an important step in enabling the increased rate of study for physics associated with inertial confinement fusion.

2-2-DIMETHYLPROPANE↗

First set of gated x-ray imaging diagnostics for the Laser Megajoule facility

The Laser Megajoule (LMJ) facility located at CEA/CESTA started to operate in the early 2014 with two quadruplets (20 kJ at 351 nm) focused on target for the first experimental campaign. We present here the first set of gated x-ray imaging (GXI) diagnostics implemented on LMJ since mid-2014. This set consists of two imaging diagnostics with spatial, temporal, and broadband spectral resolution. These diagnostics will give basic measurements, during the entire life of the facility, such as position, structure, and balance of beams, but they will also be used to characterize gas filled target implosion symmetry and timing, to study x-ray radiography and hydrodynamic instabilities. The design requires a vulnerability approach, because components will operate in a harsh environment induced by neutron fluxes, gamma rays, debris, and shrapnel. Grazing incidence x-ray microscopes are fielded as far as possible away from the target to minimize potential damage and signal noise due to these sources. These imaging diagnostics incorporate microscopes with large source-to-optic distance and large size gated microchannel plate detectors. Microscopes include optics with grazing incidence mirrors, pinholes, and refractive lenses. Spatial, temporal, and spectral performances have been measured on x-ray tubes and UV lasers at CEA-DIF and at Physikalisch-Technische Bundesanstalt BESSY II synchrotron prior to be set on LMJ. GXI-1 and GXI-2 designs, metrology, and first experiments on LMJ are presented here.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modeling crossed-beam energy transfer for inertial confinement fusion

We developed a numerical code that describes both the energy transfer occurring when two or more laser beams overlap in a weakly non-homogeneous plasma, and the beam energy losses associated with the electron-ion collisions. The numerical solutions are validated with both the exact analytical solutions in homogeneous plasmas, and with new approximate analytical solutions in non-homogeneous plasmas that include the aforementioned inverse bremsstrahlung effect. Comparisons with kinetic particle-in-cell simulations are satisfactory, provided the acoustic wave-breaking limit and the self-focusing regime are not reached. An application of the Cross-Beam Energy Transfer model is shown for a typical case of indirect-drive implosion in a gold hohlraum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of fast expansion velocity with insulating tungsten wires on ∼80 kA facility

This paper presents experimental results on the effects of insulating coatings on tungsten planar wire array Z-pinches on an 80 kA, 100 ns current facility. Expansion velocity is obviously increased from ∼0.25 km/s to ∼3.5 km/s by using the insulating coatings. It can be inferred that the wire cores are in gaseous state with this fast expansion velocity. An optical framing camera and laser probing images show that the standard wire arrays have typical ablation process which is similar to their behaviors on mega-ampere facilities. The ablation process and precursor plasma are suppressed for dielectric tungsten wires. The wire array implosion might be improved if these phenomena can be reproduced on Mega-ampere facilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnostic for determining the mix in inertial confinement fusion capsule hotspot

A diagnostic is developed for determining the hotspot mix in inertial confinement fusion experiments. A multi-channel pinhole camera measures Bremsstrahlung emissions from implosion capsules ranging from 6 keV to 30 keV and records an image of the hotspot. Meanwhile, a planar crystal spectrometer measures Ar line emissions used to deduce the electron density of the hotspot. An X-ray streaked camera records the burn duration. With the Bremsstrahlung spectrum, electron density, hotspot volume, and burn duration, the mix quantity is determined by solving a pair of linear equations. This inferred mix amount has an uncertainty due to the uncertainty of the electron density, but with the help of the measured neutron product, the most likely mix quantity value can be determined. This technique is applied to experimental images to infer the quantity of CH ablator mix into the hotspot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coulomb explosion of “hot spot”

The study presented in this paper has shown that the generation of hard x rays and high-energy ions, which are detected in pinch implosion experiments, may be associated with the Coulomb explosion of the hot spot that is formed due to the outflow of the material from the pinch cross point. During the process of material outflow, the temperature of the hot spot plasma increases, and conditions arise for the plasma electrons to become continuously accelerated. The runaway of electrons from the hot spot region results in the buildup of positive space charge in this region followed by a Coulomb explosion. The conditions for the hot spot plasma electrons to become continuously accelerated have been revealed, and the estimates have been obtained for the kinetic energy of the ions generated by the Coulomb explosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PROTOPLANETARY DISK EVOLUTION AROUND THE TRIGGERED STAR-FORMING REGION CEPHEUS B

The Cepheus B (Cep B) molecular cloud and a portion of the nearby Cep OB3b OB association, one of the most active regions of star formation within 1 kpc, have been observed with the Infrared Array Camera detector on board the Spitzer Space Telescope. The goals are to study protoplanetary disk evolution and processes of sequential triggered star formation in the region. Out of {approx}400 pre-main-sequence (PMS) stars selected with an earlier Chandra X-ray Observatory observation, {approx}95% are identified with mid-infrared sources and most of these are classified as diskless or disk-bearing stars. The discovery of the additional >200 IR-excess low-mass members gives a combined Chandra+Spitzer PMS sample that is almost complete down to 0.5 M{sub sun} outside of the cloud, and somewhat above 1 M{sub sun} in the cloud. Analyses of the nearly disk-unbiased combined Chandra and Spitzer-selected stellar sample give several results. Our major finding is a spatio-temporal gradient of young stars from the hot molecular core toward the primary ionizing O star HD 217086. This strongly supports the radiation-driven implosion (RDI) model of triggered star formation in the region. The empirical estimate for the shock velocity of {approx}1 km s{sup -1} is very similar to theoretical models of RDI in shocked molecular clouds. The initial mass function (IMF) of the lightly obscured triggered population exhibits a standard Galactic field IMF shape. The unusually high apparent value of {approx}>70% star formation efficiency inferred from the ratio of star mass to current molecular gas mass indicates that most of the Cep B molecular cloud has been already ablated or transformed to stars. Contrary to the current RDI simulations, our findings indicate that star formation triggering by H II region shocks is not restricted to a single episode but can continue for millions of years. Other results include: (1) agreement of the disk fractions, their mass dependency, and fractions of transition disks with other clusters; (2) confirmation of the youthfulness of the embedded Cep B cluster; (3) confirmation of the effect of suppression of time-integrated X-ray emission in disk-bearing versus diskless systems.

79 ASTRONOMY AND ASTROPHYSICS↗

TRIGGERED STAR FORMATION AND YOUNG STELLAR POPULATION IN BRIGHT-RIMMED CLOUD SFO 38

We have investigated the young stellar population in and around SFO 38, one of the massive globules located in the northern part of the Galactic H II region IC 1396, using the Spitzer IRAC and MIPS observations (3.6-24 {mu}m), and followed up with ground-based optical photometric and spectroscopic observations. Based on the IRAC and MIPS colors and H{alpha} emission, we identify {approx}45 young stellar objects (Classes 0/I/II) and 13 probable pre-main-sequence candidates. We derive the spectral types (mostly K- and M-type stars), effective temperatures, and individual extinction of the relatively bright and optically visible Class II objects. Most of the Class II objects show variable H{alpha} emission as well as optical and near-infrared photometric variability, which confirm their 'youth'. Based on optical photometry and theoretical isochrones, we estimate the spread in stellar ages to be between 1 and 8 Myr with a median age of 3 Myr and a mass distribution of 0.3-2.2 M{sub sun} with a median value around 0.5 M{sub sun}. Using the width of the H{alpha} emission line measured at 10% peak intensity, we derive the mass accretion rates of individual objects to be between 10{sup -10} and 10{sup -8} M{sub sun} yr{sup -1}. From the continuum-subtracted H{alpha} line image, we find that the H{alpha} emission of the globule is not spatially symmetric with respect to the O-type ionizing star HD 206267, and the interstellar extinction toward the globule is also anomalous. We clearly detect an enhanced concentration of YSOs closer to the southern rim of SFO 38 and identify an evolutionary sequence of YSOs from the rim to the dense core of the cloud, with most of the Class II objects located at the bright rim. The YSOs appear to be aligned along two different directions toward the O6.5V type star HD 206267 and the B0V type star HD 206773. This is consistent with the Radiation Driven Implosion (RDI) model for triggered star formation. Further, the apparent speed of sequential star formation is consistent with the speed of propagation of shocks in dense globules as derived from numerical simulations of RDI.

54 ENVIRONMENTAL SCIENCES↗

AN INVESTIGATION OF THE TYPE M MORPHOLOGICAL STRUCTURE OF IC59: A NEW MODEL FOR BRIGHT RIM CLOUDS?

We report the results from a smoothed particle hydrodynamics simulation designed to model recent observational data on the nebula and Bright Rim Cloud IC59. We further examine, in the context of radiative-driven implosion (RDI) models, the possible formation mechanisms of the morphological structure of IC59. The results of the simulation reveal the existence of a new, fourth morphological state for Bright Rim Clouds (BRCs)-which we propose to call a Type M BRC morphology. We discuss the necessary conditions for the appearance of Type M BRCs, based on analytical and numerical simulations. The simulated physical properties from our model are consistent with the available observations of IC59. We further show that the prospect of RDI triggered star formation in all Type M BRCs is not supported by the simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

SYMPATHETIC PARTIAL AND FULL FILAMENT ERUPTIONS OBSERVED IN ONE SOLAR BREAKOUT EVENT

We report two sympathetic solar eruptions including a partial and a full flux rope eruption in a quadrupolar magnetic region where a large and a small filament resided above the middle and the east neutral lines, respectively. The large filament first rose slowly at a speed of 8 km s{sup -1} for 23 minutes; it then accelerated to 102 km s{sup -1}. Finally, this filament erupted successfully and caused a coronal mass ejection. During the slow rising phase, various evidence for breakout-like external reconnection has been identified at high and low temperature lines. The eruption of the small filament started around the end of the large filament's slow rising. This filament erupted partially, and no associated coronal mass ejection could be detected. Based on a potential field extrapolation, we find that the topology of the three-dimensional coronal field above the source region is composed of three low-lying lobes and a large overlying flux system, and a null point located between the middle lobe and the overlying antiparallel flux system. We propose a possible mechanism within the framework of the magnetic breakout model to interpret the sympathetic filament eruptions, in which the magnetic implosion mechanism is thought to be a possible link between the sympathetic eruptions, and the external reconnection at the null point transfers field lines from the middle lobe to the lateral lobes and thereby leads to the full (partial) eruption of the observed large (small) filament. Other possible mechanisms are also discussed briefly. We conclude that the structural properties of coronal fields are important for producing sympathetic eruptions.

79 ASTRONOMY AND ASTROPHYSICS↗

EFFECTS OF MAGNETIC FIELD AND FAR-ULTRAVIOLET RADIATION ON THE STRUCTURES OF BRIGHT-RIMMED CLOUDS

The bright-rimmed cloud SFO 22 was observed with the 45 m telescope of Nobeyama Radio Observatory in the {sup 12}CO (J = 1-0), {sup 13}CO (J = 1-0), and C{sup 18}O (J = 1-0) lines, where well-developed head-tail structure and small line widths were found. Such features were predicted by radiation-driven implosion models, suggesting that SFO 22 may be in a quasi-stationary equilibrium state. We compare the observed properties with those from numerical models of a photoevaporating cloud, which include effects of magnetic pressure and heating due to strong far-ultraviolet (FUV) radiation from an exciting star. The magnetic pressure may play a more important role in the density structures of bright-rimmed clouds than the thermal pressure that is enhanced by the FUV radiation. The FUV radiation can heat the cloud surface to near 30 K; however, its effect is not enough to reproduce the observed density structure of SFO 22. An initial magnetic field of 5 {mu}G in our numerical models produces the best agreement with the observations, and its direction can affect the structures of bright-rimmed clouds.

79 ASTRONOMY AND ASTROPHYSICS↗

TRIGGERED STAR FORMATION IN A BRIGHT-RIMMED CLOUD (BRC 5) OF IC 1805

We report recent optical, near-infrared (NIR), and millimeter observations which have revealed some new features of the bright-rimmed cloud BRC 5 associated with W4. With slitless spectroscopy, we detected 17 H{alpha} emission stars around the cloud; 4 are near the surface of the cloud, and 1 is toward IRAS 02252+6120. NIR photometry shows that the central H{alpha} emission star, together with one bright infrared source, has large NIR excesses and Class I spectral energy distributions. These two Class I objects are associated with the 2.9 mm continuum peaks and with a bipolar outflow, and are in between two separate, elongated C{sup 18}O(J = 1-0) cores. The C{sup 18}O cores and the two Class I sources are aligned along a line at position angle {approx}240 Degree-Sign , somewhat less than perpendicular to the direction of UV radiation from the OB stars. Most of the detected H{alpha} emission stars, all T Tauri candidates, are located within {approx}3' of the cloud on the exciting star side. An estimate of the age of the stars based on a color-magnitude diagram suggests that these T Tauri candidates have ages of {approx}1 Myr or less, but are more evolved objects than the central young stellar objects. This age sequence suggests sequential star formation within the BRC 5 cloud. The {sup 13}CO(J = 1-0) emission shows three elongated structures, which indicates the asymmetric structure toward the UV incident axis. We present our exploratory simulation results by using a smoothed particle hydrodynamic code that suggests that the asymmetrical BRC 5 structure could possibly result from the evolution of a preexisting prolate molecular cloud subject to radiation-driven implosion (RDI). Our best-fit prolate cloud has an initial mass of {approx}400 M{sub Sun }, an axial ratio of {approx}1.7, and a semi-major axis of {approx}1.6 pc, pointing away from the ionization flux by an angle of 15 Degree-Sign . The simulated cloud structure not only closely matches the observed asymmetric morphological structure of BRC 5, but also reveals the possibility of the development of two major cores at the head of BRC 5. For the first time, the possibility of forming two stars by an RDI mechanism in a BRC is investigated.

79 ASTRONOMY AND ASTROPHYSICS↗

A theoretical model of a thinning current sheet in the low-β plasmas

Magnetic reconnection is an important physical process in various explosive phenomena in the universe. In previous studies, it was found that fast reconnection takes place when the thickness of a current sheet becomes on the order of a microscopic length such as the ion Larmor radius or the ion inertial length. In this study, we investigated the pinching process of a current sheet by the Lorentz force in a low-β plasma using one-dimensional magnetohydrodynamics (MHD) simulations. It is known that there is an exact self-similar solution for this problem that neglects gas pressure. We compared the non-linear MHD dynamics with the analytic self-similar solution. From the MHD simulations, we found that with the gas pressure included the implosion process deviates from the analytic self-similar solution as t→t{sub 0}, where t{sub 0} is the explosion time when the thickness of a current sheet of the analytic solution becomes 0. We also found that a pair of MHD fast-mode shocks is generated and propagates after the formation of the pinched current sheet as t→t{sub 0}. On the basis of the Rankine–Hugoniot relations, we derived the scaling law of the physical quantities with respect to the initial plasma beta in the pinched current sheet. Our study could help us estimate the physical quantities in the pinched current sheet formed in a low-β plasma.

79 ASTRONOMY AND ASTROPHYSICS↗