Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Two-body potential model based on cosine series expansion for ionic materials

There is a method to construct a two-body potential model for ionic materials with a Fourier series basis and we examine it. For this method, the coefficients of cosine basis functions are uniquely determined by solving simultaneous linear equations to minimize the sum of weighted mean square errors in energy, force and stress, where first-principles calculation results are used as the reference data. As a validation test of the method, potential models for magnesium oxide are constructed. The mean square errors appropriately converge with respect to the truncation of the cosine series. This result mathematically indicates that the constructed potential model is sufficiently close to the one that is achieved with the non-truncated Fourier series and demonstrates that this potential virtually provides minimum error from the reference data within the two-body representation. The constructed potential models work appropriately in both molecular statics and dynamics simulations, especially if a two-step correction to revise errors expected in the reference data is performed, and the models clearly outperform two existing Buckingham potential models that were tested. Moreover, the good agreement over a broad range of energies and forces with first-principles calculations should enable the prediction of materials behavior away from equilibrium conditions, such as a system under irradiation.

36 MATERIALS SCIENCE↗

A simulation-based model studying monoethanolamine and aprotic heterocyclic anion ionic liquid (AHA-IL) mixtures for carbon capture

Capturing of waste CO 2 , particularly from large industrial point sources, is necessary for either permanent storage or CO 2 utilization. Amine solvents used for carbon capture have certain drawbacks, particularly the high energy required by the reboiler for solvent regeneration and degradation of the amine with absorption/regeneration cycling. These challenges may be overcome using ionic liquids (ILs) that can be tailored for operating under typical flue gas stream conditions (8–10% CO 2 , 18–20% H 2 O, 2–3% O 2 , and 67–72% N 2 ). ILs, however, oftentimes suffer from high viscosities, leading to diffusion limitations when compared to amine solvents. This work models the combinations of aprotic heterocyclic anion ILs (AHA-IL) with monoethanolamine (MEA) and studies the carbon capture effectiveness of these mixtures. Furthermore, this study found that all AHA-IL/MEA mixtures exhibited 32 % lower enthalpy of reaction (compared to MEA) and 64 % lower viscosity (compared to AHA-IL), which are desirable characteristics for CO 2 capture solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Gas Absorption in Multivalent Ionic Liquids via Solute-Solvent Interaction Analyses

Solute-solvent interactions are often evaluated to understand and explain gas solubilities. This information is regularly used to interpret gas solubility and separation within ionic liquids (ILs). Here, we use several different quantum chemical and previous molecular dynamics simulation results to show that strong solute-solvent interactions neither lead to high solubility nor to high selectivity, with respect to other solutes. Instead, the solute-solvent interaction strength with different isolated IL ions is affected by the electrostatic extremes. Also, the solute-solvent interaction with different IL molecules is strongly correlated to the molecular volumes or polarizabilities (within a series of same-anion based ILs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical and in-situ X-ray diffraction studies of Ti 3 C 2 T x MXene in ionic liquid electrolyte

2D titanium carbide (Ti 3 C 2 T x MXene) showed good capacitance in both organic and neat ionic liquid electrolytes, but its charge storage mechanism is still not fully understood. Here, electrochemical characteristics of Ti 3 C 2 T x electrode were studied in neat EMI-TFSI electrolyte. A capacitive behavior was observed within a large electrochemical potential range (from – 1.5 to 1.5 V vs. Ag). Intercalation and de-intercalation of EMI + cations and/or TFSI– anions were investigated by in-situ X-ray diffraction. Interlayer spacing of Ti 3 C 2 T x flakes decreases during positive polarization, which can be ascribed to either electrostatic attraction effect between intercalated TFSI– anions and positively charged Ti 3 C 2 T x nanosheets or steric effect caused by de-intercalation of EMI + cations. In conclusion, the expansion of interlayer spacing when polarized to negative potentials is explained by steric effect of cation intercalation.

2D carbide↗

Trimethyl phosphate based neutral ligand room temperature ionic liquids for electrodeposition of rare earth elements

In this communication, a new class of task-specific ionic liquids (ILs) with cationic rare earth elements (REEs) is reported. These novel ILs have a wide electrochemical window of about 6 V, enabling direct electrodeposition of REE metals at room temperature. The ILs were prepared by dissolving bis(trifluoromethane)sulfonimide (NTf 2 – ) based rare earth salts (Ln(NTf 2 ) 3 ) (Ln:Lanthanide) in trimethyl phosphate (TMP) neutral ligand. Specifically, four REEs (Nd, Dy, Gd, and Pr) have been investigated in TMP based IL systems. All four metals were successfully deposited at room temperature. In conclusion, this demonstrates the applicability of the IL systems for electrodeposition of a wide range of REEs, which opens a new avenue of research for the quest to supplant high temperature molten salt systems for rare earth deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distinguishing interfacial double layer and oxide-based capacitance on gold and pre-oxidized Fe-Cr in 1-ethyl-3-methylimidazolium methanesulfonate room temperature ionic liquid aqueous mixture

The frequency-dependent impedance of a metal/oxide/room temperature ionic liquid (RTIL) interface was separated into oxide layer (C ox ) and double layer (C dl ) capacitances using electrochemical impedance spectroscopy (EIS). A pre-formed oxide of known initial thickness on Fe-20 at.% Cr was investigated in 1-ethyl-3-methylimidazolium methanesulfonate ([Emim][MeSO 3 ]) RTIL + aqueous mixtures. The oxide thickness was calculated from C ox using the complex capacitance representation and the power-law model. The result was additionally verified by cross-sectional analysis using transmission electron microscopy. The C dl calculated from the constant-phase element (CPE) was distinguishable from C ox for Fe-20Cr, which enables monitoring of the interfaces of structural metals with oxide layers in RTILs containing water.

Constant-phase element↗

Effect of nucleation time on bending response of ionic polymer–metal composite actuators

We attempted an autocatalytic electro-less plating of nickel in order to replace an electroless impregnation-reduction (IR) method in ionic polymer–metal composite (IPMC) actuators to reduce cost and processing time. Because nucleation time of Pd–Sn colloids is the determining factor of overall processing time, we used the nucleation time as our control parameter. In order to optimize nucleation time and investigate its effect on the performance of IPMC actuators, we analyzed the relationship between the nucleation time, interface morphology and electrical properties. The optimized nucleation time was 10 h. Furthermore, the trends of the performance and electrical properties as a function of nucleation time were attributed to the fact that the Ni penetration depth was determined by the minimum diffusion length of either Pd–Sn colloids or reducing agent ions. The Ni-IPMC actuators can be fabricated less than 14 h processing time without deteriorating performance of the actuators, which is comparable to Pt-IPMC prepared by IR method.

36 MATERIALS SCIENCE↗

Direct Electrodeposition of UO2 from Uranyl Bis(trifluoromethanesulfonyl)imide Dissolved in 1-Ethyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide Room Temperature Ionic Liquid System

Our study demonstrates a direct electrodeposition of UO 2 at a Pt cathode from a solution of uranyl bis(trifluoromethanesulfonyl)imide [UO 2 (NTf 2 ) 2 )] in a bulk room-temperature ionic liquid (RTIL), 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMIM + NTf 2 – ). Cyclic voltammetry (CV) studies revealed two reduction waves corresponding to the conversion of uranium(VI) to uranium(IV), and a mechanism for the overall electroreduction is proposed. A controlled-potential experiment was performed, holding the reduction potential at–1.0 V for 24 h to obtain a brown-black deposit of UO 2 on the Pt cathode. The Faradaic efficiency of the reduction process was determined to be >80%. The UO 2 deposit was characterized by powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando STM study of the interaction of imidazolium-based ionic liquid with graphite

Understanding interactions at the interfaces of carbon with ionic liquids (ILs) is crucially beneficial for the diagnostics and performance improvement of electrochemical devices containing carbon as active materials or conductive additives in electrodes and ILs as solvents or additives in electrolytes. The interfacial interactions of three typical imidazolium-based ILs, 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (AMImTFSI) ILs having ethyl (C 2 ), butyl (C 4 ) and octyl (C 8 ) chains in their cations, with highly oriented pyrolytic graphite (HOPG) were studied in-situ by electrochemical scanning tunneling microscopy (EC-STM). The etching of HOPG surface and the exfoliation of graphite/graphene flakes as well as cation intercalation were observed at the HOPG/C 2 MImTFSI interface. The etching also takes place in C 4 MImTFSI at -1.5 V vs Pt but only at step edges with a much slower rate, whereas C 8 MIm + cations adsorbs strongly on the HOPG surface under similar conditions with no observable etching or intercalation. Finally, the EC-STM observations can be explained by the increase in van der Waals interaction between the cations and the graphite surface with increasing length of alkyl chains.

25 ENERGY STORAGE↗

Synthesis and application of a metal ion coordinating ionic liquid monomer: Towards size and dispersity control of nanoparticles formed within a structured polyelectrolyte

Here, the design, synthesis, and characterization of an amphiphilic ionic liquid (IL) monomer possessing a transition metal coordinating acrylamide moiety is described. Incorporation of the acrylamide moiety is achieved by converting l-histidine into an imidazolium, followed by alkylation to introduce a decyl chain, and acrylation of the α-amino group. The acrylamide containing IL monomer and a co-monomer, poly(ethylene glycol) diacrylate (PEGDA M n 575), self-assembles into a weakly ordered 2D hexagonal lyotropic mesophase in water (34 ± 2 (w/w)%). Upon photo-irradiation of the mesophase a nanostructured polyelectrolyte retaining the 2D hexagonal structure is produced. Doping the mesophase with Au 3+ ions prior to photo-irradiation produces plasmonic Au NP copolymer composites only at a threshold mole ratio of IL monomer to gold ions (i.e., onset at 1740:1 mole ratio). At higher monomer to Au 3+ mole ratios plasmonic NPs are not formed. Evaluation of the in-situ synthesized plasmonic Au NPs by SAXS and optical spectroscopy indicate they are smaller, more uniform spherical particles that resist aggregation upon swelling and de-swelling in ethanol when compared to previously reported composites employing an IL monomer that lacks a metal ion coordination site (e.g., 3-decyl-1-vinylimidazolium IL).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comment on “Solubilities of ammonia in basic imidazolium ionic liquids” [Fluid Phase Equilib. 297 (2010) 34–39]

The enthalpies of solvation of ammonia in imidazolium-based ionic liquids (and other associated thermodynamic properties) are re-analyzed based on the data of [Fluid Phase Equilib. 297 (2010) 34–39], correcting numerical errors in the original analysis. In contrast to the original conclusions, the re-analyzed data demonstrates that the enthalpy of solvation is not a strong function of alkyl chain length. Here, the errors and uncertainties of the analysis procedure are also discussed, suggesting that the strong observed temperature dependence of enthalpy may in fact be an artifact of the systematic neglect of the non-ideality of the ammonia solute.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling the individual influences of supports and ionic liquid coatings on the catalytic properties of supported iridium complexes and iridium clusters

In this work, supported iridium complexes were synthesized by the reaction of Ir(CO) 2 (acac) (acac = acetylacetonato) with SiO 2 , γ-Al 2 O 3 , and MgO. Extended X-ray absorption fine structure (EXAFS) and infrared (IR) spectra demonstrate that the iridium was present as atomically dispersed species anchored to each support. The samples were treated in flowing H 2 at 673 K to form supported iridium clusters. EXAFS spectra and high-angle annular dark-field scanning transmission electron microscopy images demonstrate that the average diameter of the iridium clusters on each support was approximately 1.2 nm. Furthermore, the catalysts before and after cluster formation were coated with each of a family of 1,3-dialkylimidazolium ionic liquids (ILs) having varying electron-donor tendencies probed by their υ(C2H) frequencies determined by IR spectroscopy. The coated and uncoated samples were tested as catalysts for partial hydrogenation of 1,3-butadiene in a flow reactor at 333 K, with turnover frequencies determined from differential conversions. The individual influences of the IL coatings and supports on the catalyst performance were found to depend strongly on whether the iridium was site-isolated complexes or present in clusters. The IL coatings as ligands exerted dominant effects on the clusters as catalysts, whereas the supports exerted dominant effects on the isolated iridium atoms. The results indicate how to tune the effects of metal nuclearity, IL coatings, and supports on the electronic environments and catalytic properties of the metals.

1,3-Butadiene hydrogenation↗

A “Sweet” Biorefinery: Sugar-derived ionic liquids for the pretreatment of lignocellulosic biomass

Sugar-based ionic liquids (ILs) derived from biomass-based cations (choline, betaine) and sugar-derived anions were developed as sustainable pretreatment solvents to advance the concept of self-reliant biorefinery. Cholinium gluconate ([Ch][GlcA]) enabled streamlined one-pot sorghum pretreatment without the need for pH adjustment or washing, while betainium gluconate ([Bet][GlcA]) achieved higher sugar yields, improving overall process efficiency and economics. Both ILs produced hydrolysates fully compatible with microbial fermentation, demonstrating their potential for efficient, simplified biomass conversion. This work positions sugar-based ILs as powerful platforms that unite sustainable chemistry with integrated bioprocessing, marking a pivotal step toward realizing the self-reliant biorefinery.

Biomass-based ions↗

Divalent europium doped CaF 2 and BaF 2 nanocrystals from ionic liquids

A new, facile and quick synthesis method for Eu 2+ doped the alkaline earth fluorides was developed using ionic liquids as solvent, precursor and capping agent. Reductive atmosphere and very high temperatures were avoided, while still attaining the desired structure, small particle sizes and divalent oxidation state of the lanthanide. Here, this opens the door for the development of new Ln 2+ doped nanomaterials. Here, the successful Eu 2+ incorporation was proven by optical spectroscopic measurements which showed the spin and parity allowed f-d transitions of Eu 2+ in CaF 2 :Eu 2+ /BaF 2 :Eu 2+ . 4f 7 -4f 7 transitions could be observed at low temperatures (7 K).

36 MATERIALS SCIENCE↗

Influence of solvents on electrochemical stability window of ionic liquid solutions

The electrochemical stability window (ESW) defines the voltage range within which an electrolyte remains stable against oxidation and reduction, serving as a key descriptor for ionic liquid (IL)-based systems. The ESWs of 15 ILs with diverse cation-anion combinations were systematically investigated, both in their neat forms and as binary mixtures with three representative solvents, i.e., propylene carbonate (PC), ethylene glycol (EG), and tetrahydrofuran (THF). Cyclic voltammetry on a glassy carbon electrode determined anodic and cathodic stability limits, revealing that ESW protection in IL-solvent mixtures strongly depends on solvent polarity, proticity, and IL compatibility. PC, with a high dielectric constant and aprotic character, broadened anodic limits and moderately stabilized cathodic limits. THF maintained compact interfacial structure, offering additional cathodic protection, whereas EG, being protic, reduced ESWs via proton-coupled electron transfer and hydrogen evolution. The solvent protection trend followed by PC > THF > EG, with bulky, hydrophobic cations ([HMIM] + , [BMPYRR] + ) and weakly coordinating anions ([NTF 2 ] - , [DCA] - , [DEP] - ) showing the highest ESW protection for 50 mol% IL in these solvents. Among the neat ILs, [EMIM][DEP], [HMIM][PF 6 ], and [BMPYRR][DCA] showed wide ESWs of ∼5.5 V. These results provide valuable insight into solvent-modulated electrochemical stability, enabling rational design of IL-based electrolytes for energy storage and electrosynthesis.

25 ENERGY STORAGE↗

Rietveld refinement and ionic conductivity of Ca{sub 8.4}Bi{sub 1.6}(PO{sub 4}){sub 6}O{sub 1.8}

The structure of Ca{sub 8.4}Bi{sub 1.6}(PO{sub 4}){sub 6}O{sub 1.8}, isostructural with Fluoroapatite, was determined by X-ray powder diffraction methods. The results of Rietveld refinement revealed that the formula of this compound is [Ca{sub 4}]{sup 4f}[Ca{sub 4.4}Bi{sub 1.6}]{sup 6h}(PO{sub 4}){sub 6}[O{sub 1.8}]{sup 2a}, space group P63/m (a=9.468 (3) A, c=6.957 (3) A). A total substitution of Bi{sup 3+} ions in the (6h) sites was related particularly to the high polarizability of the Bi{sup 3+} ion compared to Ca{sup 2+}. The observed frequencies in the Raman and infrared spectra were explained and discussed on the basis of unit-cell group analyses and in comparison with Fluoroapatite and other oxyapatites. The ionic conductivity over a wide range of temperature was investigated according to the complex impedance method. The highest overall conductivity values were found at {sigma}{sub 700 Degree-Sign C} =5.03 Multiplication-Sign 10{sup -7} S cm{sup -1} and E{sub a}=0.50 eV. - Graphical abstract: The final Rietveld refinement plot of the Ca{sub 8.4}Bi{sub 1.6} (PO{sub 4}){sub 6}O{sub 1.8}. Highlights: Black-Right-Pointing-Pointer The Rietveld refinement revealed that the formula of this compound is Ca{sub 8.4}Bi{sub 1.6}(PO{sub 4}){sub 6}O{sub 1.8}. Black-Right-Pointing-Pointer Vibrational spectroscopy supports the high symmetry P63/m space group for this apatite. Black-Right-Pointing-Pointer This apatite contained channels where oxygen ions were located in 2a sites. Black-Right-Pointing-Pointer The possibility of anionic conduction along these channels was considered.

36 MATERIALS SCIENCE↗

Influence of nickel doping on oxygen-ionic conductivity of the n = 1 Ruddlesden-Popper Phases La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} (δ = 0.0905)

The results of the synthesis and characterization of the optimally doped La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4-δ} solid solution with x = 0, 0.1, 0.2 and 0.3 are reported. The versatility of these La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} materials is explained on the basis of structural features and the ability to accommodate oxygen nonstoichiometry. According to powder X-ray and neutron diffraction data, La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} adopts the tetragonal structure with oxygen vacancies occurring preferentially at the O{sub ap} sites within the {(La/Ca)O} layers of the perovskite blocks and the oxygen deviation from stoichiometry δ was found to be δ=0.0905(6). The bulk conductivity indicated an Arrhenius-type thermally activated process and oxygen vacancies are the possible ionic charge carriers at T=270 °C. An increase of the conductivity was detected when Ni was introduced. With nickel ratio variation, a strong correlation was observed between the Cu(Ni)-O{sub ap} apical bond length variation and the conductivity variation through controlling the O{sup 2−} ion migration. - Highlights: • We report the synthesis and structure of the La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} (0≤x≤0.3; δ=0.0905) compounds. • La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} (x=0.0, 0.2, 0.3) doped with Ni{sup 2+} have a higher conductivity than undoped La{sub 1.85}Ca{sub 0.15}CuO{sub 4−δ}. • At T=270 °C, sample x=0.3 has the highest conductivity (0.2915 sm{sup −1}).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure, and ionic conductivity of a new layered metal phosphate, Li{sub 2}Sr{sub 2}Al(PO{sub 4}){sub 3}

A new layered metal phosphate, Li{sub 2}Sr{sub 2}Al(PO{sub 4}){sub 3}, was synthesized in the form of either a single-crystal or polycrystalline powder using the molten hydroxide flux method or a solid-state reaction, respectively. Li{sub 2}Sr{sub 2}Al(PO{sub 4}){sub 3} crystallizes to the P2{sub 1}/n (Z=4) monoclinic space group with lattice parameters a≈4.95 Å, b≈22.06 Å, c≈8.63 Å, and β≈91.5°. The structure is composed of stacked [LiSrAl(PO{sub 4}){sub 2}] layers alternating regularly with [LiSrPO{sub 4}] layers. In the [LiSrAl(PO{sub 4}){sub 2}] sublattice, the AlO{sub 6} octahedra and PO{sub 4} tetrahedra are tilted cooperatively to form an anionic, corrugated, two-dimensional [Al(PO{sub 4}){sub 2}]{sup 3−} framework that can be regarded as a “distorted-glaserite” structure. The [LiSrPO{sub 4}] sublattice is that of a layered block containing a six-membered ring formed from alternating linkages of LiO{sub 4} and PO{sub 4} tetrahedra. The six-membered rings show a boat-type arrangement with the up(U) or down(D) pointing sequence, UUDUUD. The interspace between the two sublattices generates a two-dimensional pathway for Li{sup +} ion conduction. The impedance measurement indicated that Li{sub 2}Sr{sub 2}Al(PO{sub 4}){sub 3} had a moderate ion conductivity (σ≈1.30×10{sup −4} S cm{sup −1} at 667 K), with an activation energy E{sub a}≈1.02 eV. - Graphical abstract: Polyhedral view of Li{sub 2}Sr{sub 2}Al(PO{sub 4}){sub 3}. Li{sup +} ions are represented by green spheres, Sr atoms by white spheres, AlO{sub 6} groups by octahedra, and PO{sub 4} groups by tetrahedra. - Highlights: • New compound Li{sub 2}Sr{sub 2}Al(PO{sub 4}){sub 3} is reported. • The crystal structure is investigated by single-crystal XRD analysis. • The structure is formed by the alternate stacking of two different sublattices. • Correlation between the crystal structure and ionic conductivity is discussed.

36 MATERIALS SCIENCE↗