Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionization potentials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Detection of microcalcifications by characteristic magnetic susceptibility effects using MR phase image cross-correlation analysis

Purpose: To develop and evaluate a new method for detecting calcium deposits using their characteristic magnetic susceptibility effects on magnetic resonance (MR) images at high fields and demonstrate its potential in practice for detecting breast microcalcifications. Methods: Characteristic dipole signatures of calcium deposits were detected in magnetic resonance phase images by computing the cross-correlation between the acquired data and a library of templates containing simulated phase patterns of spherical deposits. The influence of signal-to-noise ratio and various other MR parameters on the results were assessed using simulations and validated experimentally. The method was tested experimentally for detection of calcium fragments within gel phantoms and calcium-like inhomogeneities within chicken tissue at 7 T with optimized MR acquisition parameters. The method was also evaluated for detection of simulated microcalcifications, modeled from biopsy samples of malignant breast cancer, inserted in silico into breast magnetic resonance imaging (MRIs) of healthy subjects at 7 T. For both assessments of calcium fragments in phantoms and biopsy-based simulated microcalcifications in breast MRIs, receiver operator characteristic curve analyses were performed to determine the cross-correlation index cutoff, for achieving optimal sensitivity and specificity, and the area under the curve (AUC), for measuring the method’s performance. Results: The method detected calcium fragments with sizes of 0.14–0.79 mm, 1 mm calcium-like deposits, and simulated microcalcifications with sizes of 0.4–1.0 mm in images with voxel sizes between (0.2 mm){sup 3} and (0.6 mm){sup 3}. In images acquired at 7 T with voxel sizes of (0.2 mm){sup 3}–(0.4 mm){sup 3}, calcium fragments (size 0.3–0.4 mm) were detected with a sensitivity, specificity, and AUC of 78%–90%, 51%–68%, and 0.77%–0.88%, respectively. In images acquired with a human 7 T scanner, acquisition times below 12 min, and voxel sizes of (0.4 mm){sup 3}–(0.6 mm){sup 3}, simulated microcalcifications with sizes of 0.6–1.0 mm were detected with a sensitivity, specificity, and AUC of 75%–87%, 54%–87%, and 0.76%–0.90%, respectively. However, different microcalcification shapes were indistinguishable. Conclusions: The new method is promising for detecting relatively large microcalcifications (i.e., 0.6–0.9 mm) within the breast at 7 T in reasonable times. Detection of smaller deposits at high field may be possible with higher spatial resolution, but such images require relatively long scan times. Although mammography can detect and distinguish the shape of smaller microcalcifications with superior sensitivity and specificity, this alternative method does not expose tissue to ionizing radiation, is not affected by breast density, and can be combined with other MRI methods (e.g., dynamic contrast-enhanced MRI and diffusion weighted MRI), to potentially improve diagnostic performance.

60 APPLIED LIFE SCIENCES↗

Raman scattering of photons by hydrogenlike ions I: A semirelativistic and nondipole approach

Going beyond the usual nonrelativistic treatments of Raman scattering of light by a ground-state electron in hydrogenic ions, we propose in this work a semirelativistic and nondipole approach in the case of inelastic process under the ionization threshold. This scheme is based, on the one hand, on the discrete semirelativistic Coulomb Sturmian basis sets, and on the other hand, on the direct Foldy–Wouthuysen interaction Hamiltonian derived recently from the Dirac equation with electromagnetic potentials (Hinschberger and Hervieux 2012) and confirmed by us to seventh order in powers of 1∕m. It includes the paramagnetic, the diamagnetic, the magnetic field–spin and the electric field–spin interactions. Moreover, the photon fields are expanded in electric and magnetic multipoles and nondipole effects are fully taken into account. On utilizing these ingredients, we build in detail the multipole expansion of the semirelativistic Raman scattering cross section when the photon energy is under the ionization threshold. For each type of the allowed multipole components, namely EE, MM and EM in the standard notations, suitable closed forms of total scattering cross sections are calculated for numerical computations. Such analytical expressions enable the evaluation of the contribution of each of these interaction operators and field multipoles in the scattering process.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Considerations for a Radar System to Detect an Ocean Underneath the Icy Shell of Europa

The detection of an ocean underneath Europa is one of the primary objectives of the Jupiter Icy Moons Orbiter (JIMO) mission. An orbiting surface penetrating radar has the potential of providing that measurement thus yielding information regarding the possibility of life support on Europa. Radars in the MHz range have successfully monitored the kilometer-deep ice shelves of Greenland and Antarctica, including the detection of Lake Vostok (and others) below an ice sheet thickness of about 4 km. The performance of a radar system orbiting Europa will be subject to several potential complications and unknowns. Besides ionospheric dispersion and the actual depth of the ocean, which is estimated between 2 and 30 km, major unknowns affecting radar performance are the temperature profile, the amount of salt and other impurities within the ice crust as well as the surface roughness. These impurities can in part be produced at the highly irradiated surface by magnetospheric interactions and transported downward into the ice crust by geologic processes. The ionospheric interference must also be modeled from effects of these interactions on production of the thin neutral atmosphere and subsequent ionization of the neutrals. We investigated these uncertainties through radar simulations using different surface and ice characteristics over a frequency range from 10 to 50 MHz. The talk will present results from these simulations discussing potential limitations.

Markus, Thorsten↗

Design and Performance of a Gas Chromatograph for Automatic Monitoring of Pollutants in Ambient Air

In recent years, interest in air pollution constituents has focused on carbon monoxide and hydrocarbons as prime components of polluted air. Instrumental methods have been developed, and commercial instruments for continuous monitoring of these components have been available for a number of years. For the measurement of carbon monoxide, non-dispersive infrared spectroscopy has been the accepted tool, in spite of its marginal sensitivity at low parts-per-million levels. For continuously monitoring total hydrocarbons, the hydrogen flame ionization analyzer has been widely accepted as the preferred method. The inadequacy of this latter method became evident when it was concluded that methane is non-reactive and cannot be considered a contaminant even though present at over 1 ppm in the earth's atmosphere. Hence, the need for measuring methane separately became apparent as a means of measuring the reactive and potentially harmful non-methane hydrocarbons fraction. A gas chromatographic method for the measurement of methane and total hydrocarbons which met these requirements has been developed. In this technique, methane was separated on conventional gas chromatographic columns and detected by a hydrogen flame ionization detector (FID) while the total hydrocarbons were obtained by introducing a second sample directly into the FID without separating the various components. The reactive, or non-methane hydrocarbons, were determined by difference. Carbon monoxide was also measured after converting to methane over a heated catalyst to render it detectable by the FID. The development of this method made it possible to perform these measurements with a sensitivity of as much as 1 ppm full scale and a minimum detectability of 20 ppb. Incorporating this technique, criteria were developed by APCO for a second generation continuous automatic instrument for atmospheric monitoring stations.

Villalobos, R.↗

Off state breakdown behavior of AlGaAs / InGaAs field plate pHEMTs

Off-state breakdown voltage, V{sub br}, is an important parameter determining the maximum power output of microwave Field Effect Transistors (FETs). In recent years, the use of field plates has been widely adopted to significantly increase V{sub br}. This important technological development has extended FET technologies into new areas requiring these higher voltages and power levels. Keeping with this goal, field plates were added to an existing AlGaAs / InGaAs pseudomorphic High Electron Mobility Transistor (pHEMT) process with the aim of determining the off-state breakdown mechanism and the dependency of V{sub br} on the field plate design. To find the mechanism responsible for breakdown, temperature dependent off-state breakdown measurements were conducted. It was found that at low current levels, the temperature dependence indicates thermionic field emission at the Schottky gate and at higher current levels, impact ionization is indicated. The combined results imply that impact ionization is ultimately the mechanism that is responsible for the breakdown in the tested transistors, but that it is preceded by thermionic field emission from the gate. To test the dependence of V{sub br} upon the field plate design, the field plate length and the etch depth through the highly-doped cap layer under the field plate were varied. Also, non-field plate devices were tested along side field plate transistors. It was found that the length of the etched region under the field plate is the dominant factor in determining the off-state breakdown of the more deeply etched devices. For less deeply etched devices, the length of the field plate is more influential. The influence of surface states between the highly doped cap layer and the passivation layer along the recess are believed to have a significant influence in the case of the more deeply etched examples. It is believed that these traps spread the electric field, thus raising the breakdown voltage. Three terminal breakdown voltages approaching 60V for the most deeply recessed devices are seen.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Alignment of dust grains in ionized regions

The rate at which charged dust grains in a plasma are torqued by passing ions and electrons is calculated. When photo-emission of electrons is not important, attraction of ions by the grain monopole potential increases the rate at which the grains' spins are dealigned by nearly an order of magnitude. Consequently, the energy density of the magnetic field required to align grains in an H II region may be increased by about an order of magnitude. In contrast, electric dipole and quadrupole moments are unlikely to produce large dealignment rates for grains of modest length-to-width ratio. Nonetheless, for positively charged grains these higher-order moments likely prevent monopole repulsion of ions from reducing the dealignment rate far below that for neutral grains. The presence of positive grain charge therefore does not greatly facilitate grain alignment in an H II region.

Anderson, Nels↗

RF sheath induced sputtering on Proto-MPEX part 2: Impurity transport modeling and experimental comparison

The Prototype Material Plasma Exposure eXperiment (Proto-MPEX) is a pulsed linear plasma device that uses a radio frequency (RF) helicon antenna and a helicon ceramic window as the plasma ionization source. Modeling performed within this work on the helicon operations predicts hot spots on the helicon ceramic window due to an RF-induced sheath. The RF sheath potential leads to physical sputtering of the ceramic window predominantly where the helicon antenna sits around the helicon window. The role of oxygen in sputtering within Proto-MPEX is also investigated and is needed to match the experimental data. Experiments on Proto-MPEX show reasonable agreement with the modeled erosion/redeposition pattern on the helicon window, and the modeled impurity flux to the target shows radial transport within the device as expected from classical collisional impurity transport. Temperature screening of impurities is shown to be needed for Proto-MPEX to reduce impurity flux to the target. The modeling approach used in this work can be applied to other plasma RF applications for the determination of impurity production and transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nitrogen‐Nitrogen Bond Breaking in Irradiation Products of Hexanitrohexaazaisowurtzitane (CL‐20)

While the primary result of an interaction of ionizing radiation with an organic material is the ejection of electrons from molecular orbitals producing cations, the free electrons can further interact, yielding excited states; and, potentially, anions. In this work, we computed reaction barriers and energies for N−N bond breaking in the CL-20 cation, anion, and excited state to investigate if CL-20 degradation is accelerated after radiation exposure. We focused on N−N bond dissociation because it is the rate-determining step in the thermal degradation of CL-20. We found that N−N cleavage rapidly takes place in the CL-20 cation and anion with greatly reduced reaction energies as compared to CL-20. We also outlined a potential path for photodissociation of the N−N bond. While CL-20 is kinetically stable, initial degradation occurs readily in its irradiation products. In conclusion, this is of importance for the performance of the explosive after high-dose exposure and influences aging if CL-20 is irradiated at a low dose over extended periods of time.

CL-20 anion↗

ESI-MS Identification of the Cationic Phosphine-Ligated Gold Clusters Au1-Au22: Insight into the Gold-Ligand Ratio and Abundance of Larger Clusters

Triphenylphosphine (PPh3)-ligated gold clusters offer promising potential applications due to their relative ease of synthesis and usefulness in forming advanced cluster architectures. While previous studies reported cationic PPh3-ligated gold clusters with core sizes of Au1 - Au4, Au6 - Au11, and Au¬13 - Au14, there has not been definitive identification by mass spectrometry of larger clusters in the Au12 - Au25¬ range. Herein, we survey a polydisperse solution of cationic PPh3-ligated gold clusters using high mass-resolution (M/?M = 60,000) electrospray ionization mass spectrometry (ESI-MS). To improve the sensitivity and mass resolution of larger clusters for unambiguous identification, we increased the number of scan averages and reduced the range of mass collection windows to 200 m/z, thereby mitigating potential mass and ion abundance bias resulting from smaller “building block” gold clusters and other solution components present in higher abundance. In addition to the previously reported clusters, we identified several new species including Au5(PPh3)5+, Au12(PPh3)9HCl2+, Au15(PPh3)9Cl2+, Au16(PPh3)10Cl22+, Au17(PPh3)113+, Au18(PPh3)102+, Au19(PPh3)10Cl2+, Au20(PPh3)12H33+, Au21(PPh3)10Cl2+, and Au22(PPh3)10Cl22+, indicating that a full range of clusters between Au1 - Au22 may be observed in a single polydisperse solution. Considering all of the observed clusters, our findings provide evidence that the “magic number” icosahedral Au13 may be the transition point in cluster growth between smaller clusters, exhibiting a 1:1 gold-to-ligand ratio, and larger clusters, wherein subsequent gold atoms are added to the core without an equal number of accompanying ligands. Our method demonstrates that reducing the range of m/z collection windows and increasing the number of scan averages can improve instrument sensitivity for cationic gold clusters and enable a more complete survey of polydisperse solutions, thereby providing new insights to guide and validate the results of other characterization methods and theoretical calculations. This work was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. MH acknowledges support from the DOE Science Undergraduate Laboratory Internship (SULI) program. HH acknowledges support from the DOE Office of Workforce Development for Teachers and Scientist (WDTS) under the Visiting Faculty Program (VFP). This work was performed using EMSL, a national scientific user facility sponsored by the DOE's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle.

Hewitt, Michael↗

Operating conditions for the generation of stable anode spot plasma in front of a positively biased electrode

Stability of an anode spot plasma, which is an additional high density plasma generated in front of a positively biased electrode immersed in ambient plasma, is a critical issue for its utilization to various types of ion sources. In this study, operating conditions for the generation of stable anode spot plasmas are experimentally investigated. Diagnostics of the bias current flowing into the positively biased electrode and the properties of ambient plasma reveal that unstable nature of the anode spot is deeply associated with the reduction of double layer potential between the anode spot plasma and the ambient plasma. It is found that stability of the anode spot plasma can be improved with increasing the ionization rate in ambient plasma so as to compensate the loss of electrons across the double layer or with enlarging the area of the biased electrode to prevent electron accumulation inside the anode spot. The results obtained from the present study give the guideline for operating conditions of anode spot plasmas as an ion source with high brightness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

20171130_Ind Ergo Report_631 DI Water Movement Process.

Perform an industrial ergonomic assessment to evaluate the new procedures for filling, lifting, and delivering high purity de-ionized water to building 9925. The goal was to improve on the previous method by minimizing/eliminating as much lifting and bending as possible to reduce the potential for overexertion-related injuries.

99 GENERAL AND MISCELLANEOUS↗

Book Review: Human Radiosensitivity

This well written report reviews the evidence for variation in human sensitivity to ionizing radiation from epidemiological, clinical, animal, and experimental studies. The report also considers the mechanism(s) of radiation sensitivity and the ethical implications of current and potential knowledge that might be gained in the future. The report is concisely written, considers a large number of historical as well as recent studies, and features a ‘ bullet like ’ summary at the end of each chapter that captures the salient points.

Morgan, William F.↗

The Formation of IRIS Diagnostics. IX. The Formation of the C i 135.58 NM Line in the Solar Atmosphere

The C i 135.58 nm line is located in the wavelength range of NASA’s Interface Region Imaging Spectrograph ( IRIS ) small explorer mission. We study the formation and diagnostic potential of this line by means of non local-thermodynamic-equilibrium modeling, employing both 1D and 3D radiation-magnetohydrodynamic models. The C i/C ii ionization balance is strongly influenced by photoionization by Ly α emission. The emission in the C i 135.58 nm line is dominated by a recombination cascade and the line forming region is optically thick. The Doppler shift of the line correlates strongly with the vertical velocity in its line forming region, which is typically located at 1.5 Mm height. With IRIS , the C i 135.58 nm line is usually observed together with the O i 135.56 nm line, and from the Doppler shift of both lines, we obtain the velocity difference between the line forming regions of the two lines. From the ratio of the C i/O i line core intensity, we can determine the distance between the C i and the O i forming layers. Combined with the velocity difference, the velocity gradient at mid-chromospheric heights can be derived. The C i/O i total intensity line ratio is correlated with the inverse of the electron density in the mid-chromosphere. We conclude that the C i 135.58 nm line is an excellent probe of the middle chromosphere by itself, and together with the O i 135.56 nm line the two lines provide even more information, which complements other powerful chromospheric diagnostics of IRIS such as the Mg ii h and k lines and the C ii lines around 133.5 nm.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental program to determine long term characteristics of the MDE pressure transducers

The pressure cell sensors developed for the Pioneer 10/G meteoroid detection experiments (MDE) were investigated to enhance their application and their potential as a sensor in other MDE applications. Their Paschen characteristics were also investigated, and the effects of variations in geometry, Ni-63 platings (for initial ionizations) and sealing pressures were determined. The effects of extensive pre-flight testing and proton and heavy ion space radiation were investigated. Flight-quality pressure panels/cells were committed to long term testing to demonstrate their suitability for the Pioneer 10/G Missions.

Parker, C. D.↗

Support of research in X-ray astronomy

Activities described include: (1) the evaluation of CCD detectors for X-ray astronomy applications; (2) contributions to the development of an imaging gas scintillation proportional counter; (3) the evaluation of certain metal oxide crystals as potential radiation detectors; (4) optical observations and searches for X-ray sources discovered by the HEAO-1 A2 experiment; and (5) theoretical modeling of nonequilibrium ionization structure of supernova remnants.

Garmire, G.↗

Incidence, scaling relations and physical conditions of ionized gas outflows in MaNGA

ABSTRACT In this work, we investigate the strength and impact of ionized gas outflows within z ∼ 0.04 MaNGA galaxies. We find evidence for outflows in 322 galaxies ($12{{\ \rm per\ cent}}$ of the analysed line-emitting sample), 185 of which show evidence for hosting an active galactic nucleus (AGN). Most outflows are centrally concentrated with a spatial extent that scales sublinearly with Re. The incidence of outflows is enhanced at higher masses, central surface densities, and deeper gravitational potentials, as well as at higher star formation rate (SFR) and AGN luminosity. We quantify strong correlations between mass outflow rates and the mechanical drivers of the outflow of the form $\dot{M}_{\rm out} \propto \rm SFR^{0.97}$ and $\dot{M}_{\rm out} \propto L_{\rm AGN}^{0.55}$. We derive a master scaling relation describing the mass outflow rate of ionized gas as a function of M⋆, SFR, Re, and LAGN. Most of the observed winds are anticipated to act as galactic fountains, with the fraction of galaxies with escaping winds increasing with decreasing potential well depth. We further investigate the physical properties of the outflowing gas finding evidence for enhanced attenuation in the outflow, possibly due to metal-enriched winds, and higher excitation compared to the gas in the galactic disc. Given that the majority of previous studies have focused on more extreme systems with higher SFRs and/or more luminous AGN, our study provides a unique view of the non-gravitational gaseous motions within ‘typical’ galaxies in the low-redshift Universe, where low-luminosity AGN and star formation contribute jointly to the observed outflow phenomenology.

Avery, Charlotte R.↗

Position-specific carbon isotope analysis of serine by gas chromatography/Orbitrap mass spectrometry, and an application to plant metabolism

Position-specific 13 C/ 12 C ratios within amino acids remain largely unexplored in environmental samples due to methodological limitations. We hypothesized that natural-abundance isotope patterns in serine may serve as a proxy for plant metabolic fluxes including photorespiration. Here we describe an Orbitrap method optimized for the position-specific carbon isotope analysis of serine to test our hypothesis and discuss the generalizability of this method to other amino acids. Position-specific carbon isotope ratios of serine were measured using a Thermo Scientific™ Q Exactive™ GC Orbitrap™. Amino acids were hydrolyzed from Arabidopsis biomass, purified from potential matrix interferences, and derivatized alongside standards. Derivatized serine (N,O-bis(trifluoroacetyl)methyl ester) was isolated using gas chromatography, trapped in a reservoir, and purged into the electron ionization source over tens of minutes, producing fragment ions containing different combinations of atoms from the serine-derivative molecule. The 13 C/ 12 C ratios of fragments with monoisotopic masses of 110.0217, 138.0166, and 165.0037 Da were monitored in the mass analyzer and used to calculate position-specific δ 13 C values relative to a working standard. This methodology constrains position-specific δ 13 C values for nanomole amounts of serine isolated from chemically complex mixtures. The δ 13 C values of fragment ions of serine were characterized with ≤1‰ precisions, leading to propagated standard errors of 0.7–5‰ for each carbon position. Position-specific δ 13 C values differed by up to ca 28 ± 5‰ between serine molecules hydrolyzed from plants grown under contrasting pCO 2 , selected to promote different fluxes through photosynthesis and photorespiration. The method was validated using pure serine standards characterized offline. Here this study presents the first Orbitrap-based measurements of natural-abundance, position-specific carbon isotope variation in an amino acid isolated from a biological matrix. We present a method for the precise characterization of isotope ratios in serine and propose applications probing metabolism in plants. We discuss the potential for extending these approaches to other amino acids, paving the way for novel applications.

59 BASIC BIOLOGICAL SCIENCES↗