Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Phase Behavior of Neat Triblock Copolymers and Copolymer/Homopolymer Blends Near Network Phase Windows

The phase behavior of poly(isoprene-b-styrene-b-methyl methacrylate) (ISM) copolymers near the styrene-rich network phase window was examined through the use of neat triblock copolymers and copolymer/homopolymer blends. Both end-block and middle-block blending protocols were employed using poly(isoprene) (PI), poly(methyl methacrylate) (PMMA), and poly(styrene) (PS) homopolymers. Blended specimens exhibited phase transformations to well-ordered nanostructures (at homopolymer loadings up to 26 vol % of the total blend volume). Morphological consistency between neat and blended specimens was established at various locations in the ISM phase space. Copolymer/homopolymer blending permitted the refinement of lamellar, hexagonally packed cylinder, and disordered melt phase boundaries as well as the identification of double gyroid (Q{sup 230}), alternating gyroid (Q{sup 214}), and orthorhombic (O{sup 70}) network regimes. Additionally, the experimental phase diagram exhibited similar trends to those found in a theoretical ABC triblock copolymer phase diagram with symmetric interactions and statistical segments lengths generated by Tyler et al.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural and Textural Evolutions during β → α/ω Transformation in Biomedical Ti-15Mo Alloy and Its Effects on Mechanical Performance

This study investigated the precipitation behaviors and mechanical performance of Ti-15Mo alloy subjected to different treatment conditions. The microstructures were analyzed via scanning electron microscopy and transmission electron microscopy. The tensile properties and resultant fracture surfaces were investigated to determine the relationship between the phase transformation and mechanical performance. The Ti-15Mo alloy had a notable elongation due to no observable precipitation during solution treatment plus quenching (STQ). A high ultimate tensile strength (UTS) was obtained with a considerable amount of ω precipitates transformed during air cooling after solution treatment (ST). The coarse precipitates and additional precipitation free zones in the Ti-15Mo alloy treated with furnace cooling (FC) after ST induced a decrease in UTS. Furthermore, the absence of a continuous grain boundary α phase resulted in a lower strength in the specimen annealed at 600 °C after hot rolling. The alloy iso-aged after STQ exhibited good tensile properties with a UTS of 920 MPa and an elongation of 15%. The texture and variant relationship of the precipitates was analyzed with x-ray diffraction and electron backscatter diffraction. The common variants of the β matrix influenced the nucleation of precipitates in the Ti-15Mo alloy annealed after hot rolling, and the precipitates showed an obvious {01-10}α main texture. The variant selection of α precipitates at the grain boundary was caused by the two adjacent β grains in the alloy treated by FC after ST.

36 MATERIALS SCIENCE↗

Designing shape-memory-like microstructures in intercalation materials

During the reversible insertion of ions, lattices in intercalation materials undergo structural transformations. These lattice transformations generate misfit strains and volume changes that, in turn, contribute to the structural decay of intercalation materials and limit their reversible cycling. In this paper, we draw on insights from shape-memory alloys, another class of phase transformation materials, that also undergo large lattice transformations but do so with negligible macroscopic volume changes and internal stresses. We develop a theoretical framework to predict structural transformations in intercalation compounds and identify crystallographic design rules necessary for forming shape-memory-like microstructures in intercalation materials. We use our approach to systematically screen open-source structural databases comprising $n$ > 5000 pairs of intercalation compounds. We identify candidate compounds, such as Li x Mn 2 O 4 (Spinel), Li x Ti 2 (PO 4 ) 3 (NASICON), that approximately satisfy the crystallographic design rules and can be precisely doped to form shape-memory-like microstructures. Throughout, we compare our analytical results with experimental measurements of intercalation compounds. We find a direct correlation between structural transformations, microstructures, and increased capacity retention in these materials. These results, more generally, show that crystallographic designing of intercalation materials could be a novel route to discovering compounds that do not decay with continuous usage.

36 MATERIALS SCIENCE↗

Self-propagating reactions in Al/Zr multilayers: Anomalous dependence of reaction velocity on bilayer thickness

High temperature, self-propagating reactions are observed in vapor-deposited Al/Zr multilayered foils of overall atomic ratios 3 Al:1 Zr and 2 Al:1 Zr and nanoscale layer thicknesses; however, the reaction velocities do not exhibit the inverse dependence on bilayer thickness that is expected based on changes in the average diffusion distance. Instead, for bilayer thicknesses of 20-30 nm, the velocity is essentially constant at ∼7.7 m/s. We explore several possible explanations for this anomalous behavior, including microstructural factors, changes in the phase evolution, and phase transformations in the reactant layers, but find no conclusive explanations. We determine that the phase evolution during self-propagating reactions in foils with a 3 Al:1 Zr stoichiometry is a rapid transformation from Al/Zr multilayers to the equilibrium intermetallic Al{sub 3}Zr compound with no intermediate crystalline phases. This phase evolution is the same for foils of 90 nm bilayer thicknesses and foils of bilayer thicknesses in the range of 27 nm to 35 nm. Further, for foils with a bilayer thickness of 90 nm and a 3 Al:1 Zr overall chemistry, the propagation front is planar and steady, in contrast to unsteady reaction fronts in foils with 1 Al:1 Zr overall chemistry and similar bilayer thicknesses.

36 MATERIALS SCIENCE↗

Modeling of Martensite Transformation in White Layer under Thermo-mechanical Coupling in Hard-Cutting Process

Martensite volume fraction determines the hardness and wear resistance of workpiece, predicting the martensite volume fraction of the white layer is of great significance for improving the surface quality of the workpiece. Accordingly, a theoretical model on the martensite volume fraction was developed in combination with the martensite transformation temperature model and the hard-cutting FE model. A finite element (FE) model of the hard-cutting was established to obtain the stress distribution of the workpieces. A calculation model of martensite phase transformation temperature M{sub S} under the influence of the cooling rate and stress was deduced based on the change of Gibbs free energy. A theoretical model of martensite volume fraction f{sub M} of the white layer was developed based on the M{sub S} and the FE simulations. The f{sub M} calculated by the theoretical model is in accordance with the experimental result. The effects of cutting speed, feed rate, flank wear and tool rake angle on the f{sub M} in the white layers were predicted and analyzed; the results show that the f{sub M} decreases first and then increases with the cutting speed, decreases with the feed rate and the flank wear, and increases with the tool rake angle.

36 MATERIALS SCIENCE↗

Tuning the Magnetic Properties of ZnFe{sub 2}O{sub 4} Nanoparticles Through Partial Doping and Annealing

The aim of this study was to investigate the effect of annealing temperature and cobalt cation (Co{sup 2+}) doping on the magnetic properties of zinc ferrite (ZFO) nanoparticles. The nanoparticles were prepared through sol-gel combustion process with citric acid as the fuel. The obtained nanoparticles were annealed at several temperatures from 300 to 1000 °C for 2 h. Spinel formation was proved by X-ray diffraction (XRD) patterns, and the average crystallite size in all samples was estimated between 22 and 32 nm. It is worthwhile to mention that Fe{sub 2}O{sub 3} and ZnO are detected as the medium phases. Meanwhile, Fe{sub 2}O{sub 3} phase transformation to the other allotropes has happened around 400 °C and was characterized via the simultaneous thermal analysis (STA) and XRD. For higher annealing temperatures, diffusion has gradually been completed and, finally, the single phase of spinel structure was prepared at 1000 °C. In addition, field-emission scanning electron microscopy (FESEM) images revealed that the nanoparticle size after annealing was between 30 and 200 nm for the whole samples. The formation of the spinel phase was considered the most important factor on the magnetic properties of ZFO. Cobalt doping, annealing temperature, and also Fe{sub 2}O{sub 3} phase were the main factors on changing magnetic properties. Paramagnetic nanoparticles with higher coercivity for doped samples rather than un-doped samples have been obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Inverse Thermal Analysis of Ti-6Al-4V Friction Stir Welds Using Numerical-Analytical Basis Functions with Pseudo-Advection

Inverse thermal analysis of Ti-6Al-4V friction stir welds is presented that demonstrates application of a methodology using numerical-analytical basis functions and temperature-field constraint conditions. This analysis provides parametric representation of friction-stir-weld temperature histories that can be adopted as input data to computational procedures for prediction of solid-state phase transformations and mechanical response. These parameterized temperature histories can be used for inverse thermal analysis of friction stir welds having process conditions similar those considered here. Case studies are presented for inverse thermal analysis of friction stir welds that use three-dimensional constraint conditions on calculated temperature fields, which are associated with experimentally measured transformation boundaries and weld-stir-zone cross sections.

36 MATERIALS SCIENCE↗

Carbon transport in diamond anvil cells

High-pressure-induced carbon transport from diamond anvils into the pressure chamber of diamond anvil cells (DACs) was studied by micro-Raman spectroscopy. Depending on experimental conditions (temperature and pressure), various carbon phases (amorphous carbon, diamond, microcrystalline or nanocrystalline graphite) were detected in the originally carbon-free samples. Temperature-induced growth of a graphite phase at the sample/diamond interface was observed in situ at high pressure in an externally heated DAC. In laser-heated samples inside the pressure-transmitting medium, at pressures above 6 GPa there was transport of carbon from the diamond culet surface into the heated part of the sample. These observations suggest that account should be taken of possible carbon diffusion in high-pressure research with DACs, such as high-pressure melting, element partitioning, phase transformations, chemical reactions, and electrical resistivity.

47 OTHER INSTRUMENTATION↗

Post-spinel transformations and equation of state in ZnGa[subscript 2]O[subscript 4]: Determination at high pressure by in situ x-ray diffraction

Room-temperature angle-dispersive x-ray diffraction measurements on spinel ZnGa{sub 2}O{sub 4} up to 56 GPa show evidence of two structural phase transformations. At 31.2 GPa, ZnGa{sub 2}O{sub 4} undergoes a transition from the cubic spinel structure to a tetragonal spinel structure similar to that of ZnMn{sub 2}O{sub 4}. At 55 GPa, a second transition to the orthorhombic marokite structure (CaMn{sub 2}O{sub 4}-type) takes place. The equation of state of cubic spinel ZnGa{sub 2}O{sub 4} is determined: V{sub 0} = 580.1(9) {angstrom}{sup 3}, B{sub 0} = 233(8) GPa, B'{sub 0} = 8.3(4), and B''{sub 0} = -0.1145 GPa{sup -1} (implied value); showing that ZnGa{sub 2}O{sub 4} is one of the less compressible spinels studied to date. For the tetragonal structure an equation of state is also determined: V{sub 0} = 287.8(9) {angstrom}{sup 3}, B{sub 0} = 257(11) GPa, B'{sub 0} = 7.5(6), and B''{sub 0} = -0.0764 GPa{sup -1} (implied value). The reported structural sequence coincides with that found in NiMn{sub 2}O{sub 4} and MgMn{sub 2}O{sub 4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cation and anion topotactic transformations in cobaltite thin films leading to Ruddlesden-Popper phases.

Topotactic transformations involve structural changes between related crystal structures due to a loss or gain of material while retaining a crystallographic relationship. The perovskite oxide La0.7Sr0.3CoO3 (LSCO) is an ideal system for investigating phase transformations due to its high oxygen vacancy conductivity, relatively low oxygen vacancy formation energy, and strong coupling of the magnetic and electronic properties to the oxygen stoichiometry. While the transition between cobaltite perovskite and brownmillerite (BM) phases has been widely reported, further reduction beyond the BM phase lacks systematic studies. In this paper, we study the evolution of the physical properties of LSCO thin films upon exposure to highly reducing environments. We observe the rarely reported crystalline Ruddlesden-Popper phase, which involves the loss of both oxygen anions and cobalt cations upon annealing where the cobalt is found as isolated Co ions or Co nanoparticles. First-principles calculations confirm that the concurrent loss of oxygen and cobalt ions is thermodynamically possible through an intermediary BM phase. The strong correlation of the magnetic and electronic properties to the crystal structure highlights the potential of utilizing ion migration as a basis for emerging applications such as neuromorphic computing.

Chiu, I-Ting↗

Mechanisms of Hydrogen-Assisted Magnesiothermic Reduction of TiO{sub 2}

Direct reduction of TiO{sub 2} powder has been attempted for decades by researchers in an effort to decrease titanium (Ti) metal production costs. The main objective has been to avoid energy-intensive steps involved in production of primary Ti by the Kroll process. The emerging hydrogen-assisted magnesiothermic reduction process, which uses Mg to directly reduce TiO{sub 2} powder under a H{sub 2} atmosphere, has been shown to have the potential to compete directly with the Kroll process. The present studies represent an effort to understand the reduction reaction mechanisms of this process. Phase transformations and the reaction pathways are examined by SEM/EDX analysis of partially reduced powder cross-sectional, X-ray diffraction, and other analytical techniques. The results show important morphological changes, the prominent intermediate and final phases under the H{sub 2} atmosphere, as well as the local deposition behavior of the MgO byproduct. The effect of the specific surface areas of the initial particles is also discussed.

36 MATERIALS SCIENCE↗

Structural phase transition and erasable optically memorized effect in layered γ-In{sub 2}Se{sub 3} crystals

We have grown In{sub 2}Se{sub 3} layered-type crystals using chemical vapor transport method with ICl{sub 3} as the transport agent. The as-grown crystals show two different color groups of black shiny for α-phase In{sub 2}Se{sub 3} and red to yellow for γ-phase In{sub 2}Se{sub 3}. High-resolution transmission electron micro scopy verifies crystalline state and structural polytype of the as-grown In{sub 2}Se{sub 3}. The results indicate that the α-In{sub 2}Se{sub 3} crystals present more crystalline states than those of the other amorphous γ-In{sub 2}Se{sub 3}. The amorphous effect on the advancing of optoelectronic property of γ-In{sub 2}Se{sub 3} shows erasable optical-memorized effect in the disordered and polycrystalline γ-In{sub 2}Se{sub 3} layers. Laser-induced photodarkening and annealed-recovery test verified that a reversible structural-phase transition of γ↔α can occur inside the γ-In{sub 2}Se{sub 3}. Thermoreflectance and Raman scattering measurements are carried out to identify the inter-phase transformation of the γ-In{sub 2}Se{sub 3} polycrystals using different heat treatments. Direct band gaps and Raman vibration modes for the γ- and α-In{sub 2}Se{sub 3} crystalline phases are, respectively, characterized and identified. The character of γ↔α inter-phase transition promotes feasible optical and optoelectronic applications of the γ-In{sub 2}Se{sub 3} material in optical memory, optics, and solar-energy devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cetyltrimethyl ammonium bromide assisted hydrothermal growth of hematite hollow cubes

Hematite hollow cubes have been prepared by forced hydrolysis of ferric chloride solutions under hydrothermal conditions. The effects of reaction time, reaction temperature and cetyltrimethyl ammonium bromide on the transformation process from akageneite to hematite were investigated in detail. The products were characterized by X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. It is found that cetyltrimethyl ammonium bromide was a critical factor influencing the phase transformation process of akageneite and the final morphology of the as-prepared products. With cetyltrimethyl ammonium bromide, hematite hollow cubes and porous spheres were obtained. Otherwise only dense cubes were observed even prolonging reaction time or increasing reaction temperature. The mechanism was proposed.

36 MATERIALS SCIENCE↗

Unravelling Microstructure Selection in an Additively Manufactured Eutectic High‐Entropy Alloy

High-entropy alloys (HEAs) are promising candidates for advanced structural applications due to their excellent mechanical properties. Additive manufacturing (AM), with its rapid solidification conditions, enables the creation of unique nonequilibrium microstructures. To fully leverage the synergy between AM and HEAs, understanding how processing affects structure and properties is essential. Here, how solidification rate influences microstructure evolution and phase transformation pathway in laser additively manufactured AlCrFe2Ni2 eutectic HEAs is investigated. By increasing the laser scan speed and hence the solidification rate, distinct solidification modes evolving from coupled eutectic to anomalous eutectic and eventually to single-phase solidification are revealed. These transitions result in distinct microstructures and a wide range of mechanical properties. Thermodynamic modeling and molecular dynamics simulations reveal that low cooling rates allow for sufficient atomic diffusion and phase separation, facilitating coupled eutectic growth. In contrast, rapid cooling suppresses diffusion and destabilizes the solid–liquid interface, promoting anomalous or single-phase solidification. This integrated experimental and computational approach provides a multiscale understanding of solidification mechanisms in HEAs and underscores how kinetic effects can over-ride thermodynamic predictions under nonequilibrium conditions. Furthermore, these results demonstrate that AM can serve as a powerful tool to design HEAs with tailored microstructures and properties.

36 MATERIALS SCIENCE↗

Strain evolution in Zr-2.5 wt% Nb observed with synchrotron X-ray diffraction

Highlights: • The X-ray diffraction is useful for in-situ monitoring of lattice strain thermal changes in differently oriented grains. • 2D elastic strain evaluation performed for α-matrix and for δ-hydride. • A change in matrix strain considered as a sum of metal thermal expansion, effect of hydrogen, and inter-granular strain. • Differently oriented hydrides have different lattice parameter and start from different strain states. The mechanical behaviour of hydrides in Zr alloy at low hydrogen concentrations continues to be the subject of research due to wide engineering application and highly complex behaviour of the Zr-H system. Significant structural differences between hydrides and α-Zr cause large dilatational strains associated with formation of the hydride precipitates in zirconium. Two hydride populations were observed to form under different strain states in the α-Zr matrix. The hysteresis of the hydrogen solubility is detected both in intensity and in strain curves for measured δ(111), α(00.2) and α{10.0} peaks. A two-dimensional analysis of α-strain was performed for the axial-hoop, hoop-radial, and axial-radial planes of Zr-2.5 wt% Nb pressure tube material. Variations in the hydrostatic and deviatoric strain components of the α-Zr with temperature were examined. In addition, a change in phase strain during a thermal excursion was considered as a sum of three cooperating components: phase thermal expansion (ε{sub T}), strains associated with other phase presenting in material (ε{sub [H]} or ε{sub matrix}), and inter-granular strain within the phase caused by Type II stresses (ε{sub other}). The present study broadens our understanding of strain evolution in a Zr-H system undergoing hydride dissolution and precipitation. An X-ray synchrotron diffraction technique enables the in-situ following of strain variations in differently oriented grain families during the thermal cycle. In contrast to widely reported the average strain value within the α-phase, the diffraction patterns generated with this technique allow the evaluation of the anisotropic directionality of strains in different phases in Zr-H system generated during phase transformation.

36 MATERIALS SCIENCE↗

Processing and Characterization of Ag-Cu-Sn Brazing Alloy Prepared by a Mechanical Alloying Method

Mechanical alloying was used to prepare an Ag-Cu-Sn brazing alloy with the low amounts of intermetallic compounds. X-ray diffraction and differential scanning calorimetry were carried out to investigate the phase transformation of the as-milled samples. It seemed that the intermetallic compounds experienced the stage of synthesis-decomposition-resynthesis in the ball milling process. By controlling the ball milling time and tin contents, the solid solution phases of Ag (Cu, Sn) and Ag (Cu) were achieved in the 60Ag30Cu10Sn sample after milling for 40 h. Although the intermetallic compound will be generated during the brazing process, the improvement of their distributed morphology is beneficial for the good bonding interface of the joint with stainless steel substrate.

36 MATERIALS SCIENCE↗

Modulating the Pseudoelastic Response of NiTi Using Ion Implantation

Ni-ion irradiated NiTi is nearly 50% harder, retains 85% recoverable deformation, and has reduced hysteresis. This work explores the feasibility of using ion beam modification to modulate the austenite to martensite phase transformation in NiTi, thereby achieving novel or localized properties in near-surface regions.

36 MATERIALS SCIENCE↗

Temperature transformation of blended magnesium potassium phosphate cement binders

In this study, a multi-technique approach was utilised to determine the high temperature performance of magnesium potassium phosphate cement (MKPC) blended with fly ash (FA) or ground granulated blast furnace slag (GBFS) with respect to nuclear waste immobilisation applications. Conceptual fire conditions were employed (up to 1200 °C, 30 min) to simulate scenarios that could occur during interim storage, transportation or within a final geological disposal facility. After exposure up to 400 °C, the main crystalline phase, struvite-K (MgKPO{sub 4}·6H{sub 2}O), was dehydrated to poorly crystalline MgKPO{sub 4} (with corresponding volumetric and mass changes), with MgKPO{sub 4} recrystallisation achieved by 800 °C. XRD and SEM/EDX analysis revealed reaction occurred between the MgKPO{sub 4} and FA/GBFS components after exposure to 1000–1200 °C, with the formation of potassium aluminosilicate phases, leucite and kalsilite (KAlSi{sub 2}O{sub 6} and KAlSiO{sub 4}), commensurate with a reduced relative intensity (or complete elimination) of the dehydrated struvite-K phase, MgKPO{sub 4.} This was further supported by solid-state NMR ({sup 27}Al and {sup 29}Si MAS), where only residual features associated with the raw FA/GBFS components were observable at 1200 °C. The high temperature phase transformation of blended MKPC binders resulted in the development of a glass/ceramic matrix with all existing porosity infilled via sintering and the formation of a vitreous phase, whilst the physical integrity was retained (no cracking or spalling). This study demonstrates that, based on small-scaled specimens, blended MKPC binders should perform satisfactorily under fire performance parameters relevant to the operation of a geological disposal facility, up to at least 1200 °C.

36 MATERIALS SCIENCE↗