Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Towards a mechanistic understanding of the sol–gel syntheses of ternary carbides

Sol–gel chemistry, while being extremely established, is to this day not fully understood, and much of the underlying chemistry and mechanisms are yet to be unraveled. Here, in this work, we elaborate on the sol–gel chemistry of Cr 2 GaC, the first layered ternary carbide belonging to the MAX phase family to ever be synthesized using this wet chemical approach. Leveraging a variety of both in- and ex situ characterization techniques, including X-ray and neutron powder diffraction, X-ray absorption fine structure analyses, total scattering analyses, and differential scanning calorimetry coupled with mass spectrometry, in-depth analyses of the local structures and reaction pathways are elucidated. While the metals first form tetrahedrally and octahedrally coordinated oxidic structures, that subsequently grow and crystallize into oxides, the carbon source citric acid sits on a separate reaction pathway, that does not merge with the metals until the very end. In fact, after decomposing it remains nanostructured and disordered graphite until the temperature allows for the reduction of the metal oxides into the layered carbide. Based on this, we hypothesize that the method is mostly applicable to systems where the needed metals are reducible by graphite around the formation temperature of the target phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced tuning of the triangular-honeycomb structure of ferroelectric quantum spin liquid candidate, TbInO 3

The pressure response of the triangular-honeycomb-structured quantum spin liquid candidate, TbInO 3 , has been determined via neutron powder diffraction up to 5.75(5) GPa. The system retains hexagonal symmetry up to the maximum pressure considered. The structure was found to compress less anisotropically than related compounds, though it is more compressible within the 2D plane than between subsequent layers. Through extracting the O-atom coordinates we find experimental evidence that may suggest the enhancement of ferroelectricity at pressures as low as 3 GPa.

Ridley, Christopher J. [Oak Ridge National Laborat↗

Uptake and binding of La 3+ and Cr 3+ ions by alkali metal substituted alpha-zirconium phosphate

The conversion of alpha-zirconium phosphate, Zr(HPO 4 ) 2 ·H 2 O, to the K-, Rb-, and Cs-phases and the subsequent ion exchange behavior of these alkali metal phases, A-ZrP, with La 3+ and Cr 3+ have been investigated. The conversion to the A-ZrP phases was achieved by reaction with metal chloride, metal hydroxide solution, and confirmed through various techniques, including X-ray powder diffraction, thermogravimetry analysis, IR spectroscopy, scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy. The effect of material hydration, which increased the interlayer distance, was also examined. The ion exchange behavior of the A-ZrP showed strong affinity for both La 3+ , a representative for trivalent lanthanide metals, and Cr 3+ , a representative for the trivalent transition metals, with a rapid, near quantitative removal of the M 3+ ions at a pH of 3 when the ion concentration was ≤25% of the ion exchange capacity of the materials. Additionally, the ion affinity was shown to be pH and concentration-dependent, decreasing with a decrease in pH or an increase in ion concentration. Lastly, the binding strength of La- and Cr-loaded ZrP materials was examined through a series of leaching experiments in a carbonate buffer, phosphate buffer, HEPES buffer, and a series of EDTA solutions at various concentrations. No observable leaching occurred in the carbonate buffer, phosphate buffer, HEPES buffer, or when the EDTA concentration was below 0.1 mM. These results highlight the potential for the A-ZrP materials to provide a platform for trivalent transition metal and trivalent lanthanide radionuclide capture for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanochemical α to β phase transition of U 3 O 8

Recognized as the most stable phase of uranium oxide, α-U 3 O 8 is widely used throughout the nuclear fuel cycle for safe storage and transportation. There is, however, a lack of understanding of the thermodynamic relationship between α-U 3 O 8 and its polymorph, β-U 3 O 8 . This research contributes new knowledge regarding the kinetics and mechanism of a previously described mechanochemical phase transition between the α- and β-U 3 O 8 polymorphs to improve the understanding of their thermodynamic relationship. In this work, tumble milling of α-U 3 O 8 using different milling media shows an ingrowth of the β-phase over time, with an observed correlation between media density, percent conversion and lattice strain. Anisotropic peak broadening observed within collected X-ray diffraction powder patterns suggests the preservation of uranium polyhedral layered sheets throughout the milling process. Preservation of the sheets implies a shear-induced slip mechanism occurring through in-plane shifting of uranium polyhedra along lattice planes perpendicular to the polyhedral sheets.

Roach, Jordan M. [Oak Ridge National Laboratory (O↗

Negative linear compressibility and complex phase behaviour in 7 Li 2 CO 3

We present a combination of neutron powder-diffraction measurements demonstrating negative linear compressibility and irregular thermal expansion in 7 Li 2 CO 3 . This is shown to be due to an interplay between the tilting of the rigid carbonate group and the shear strain in the unit cell, which leads to a first-order transition from monoclinic to hexagonal symmetry. The phase evolution is shown to be highly sensitive to the level of hydrostaticity in the sample. Under hydrostatic conditions, the sample begins transformation at 8.5 GPa leading to a change from tetrahedral to octahedral Li coordination. Symmetry adapted basis mode analysis, combined with density functional theoretical (DFT) calculations and Raman spectroscopy, is used to show that this transition is reverse proper ferroelastic in nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Possible mechanism of charge transport and dielectric relaxation in SrO-Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3} glasses

Transparent SrBi{sub 2}B{sub 2}O{sub 7} glasses were prepared via melt-quenching technique and characterized using differential scanning calorimetry and x-ray powder diffraction. The ac conductivities of the glasses were studied as a function of frequency (100 Hz-10 MHz) at different temperatures. The frequency dependence of conductivity has been analyzed using Almond-West expression. The exponent n was nearly unaffected by temperature. Impedance and modulus spectroscopies were employed to further examine the electrical data. Dielectric relaxation exhibited a stretched exponential behavior with a stretching exponent beta independent of temperature. From conductivity analysis we have proposed that the charge transport occurs through the participation of nonbridging oxygen (NBO), which switches positions in a facile manner. The stretched exponential behavior appears to be a direct consequence of the NBO switching mechanism of charge transport.

36 MATERIALS SCIENCE↗

Invited article : High pressure standards for condensed matter physics at low temperature.

Condensed matter experiments at high pressure accentuate the need for accurate pressure scales over a broad range of temperatures, as well as placing a premium on a homogeneous pressure environment. However, challenges remain in diamond anvil cell technology, including both the quality of various pressure transmitting media and the accuracy of secondary pressure scales at low temperature. We directly calibrate the ruby fluorescence R1 line shift with pressure at T = 4.5 K using high-resolution x-ray powder diffraction measurements of the silver lattice constant and its known equation of state up to P = 16 GPa. Our results reveal a ruby pressure scale at low temperatures that differs by 6% from the best available ruby scale at room T. We also use ruby fluorescence to characterize the pressure inhomogeneity and anisotropy in two representative and commonly used pressure media, helium and methanol:ethanol 4:1, under the same preparation conditions for pressures up to 20 GPa at T = 5 K. Contrary to the accepted wisdom, both media show equal levels of pressure inhomogeneity measured over the same area, with a consistent {Delta}P/P per unit area of {+-}1.8?%/(10{sup 4}{mu}m{sup 2}) from 0 to 20 GPa. The helium medium shows an essentially constant deviatoric stress of 0.021{+-}/{+-}0.011 GPa up to 16 GPa, while the methanol:ethanol mixture shows a similar level of anisotropy up to 10 GPa, above which the anisotropy increases. The quality of both pressure media is further examined under the more stringent requirements of single crystal x-ray diffraction at cryogenic temperature. For such experiments we conclude that the ratio of sample-to-pressure chamber volume is a critical parameter in maintaining sample quality at high pressure, and may affect the choice of pressure medium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Temperature Decomposition of Almandine and Pyrope in Reducing Atmosphere

Thermal decomposition of two garnets of near end-member composition--almandine (Fe{sub 2.85}Mg{sub 0.15})(Al{sub 1.99})Si{sub 2.99}O{sub 12} and pyrope (Mg{sub 2.22}Fe{sub 0.47}Ca{sub 0.33})(Cr{sub 0.11}Fe{sub 0.06}Al{sub 1.81})Si{sub 2.98}O{sub 12}--has been carried out in reducing atmosphere (forming gas: 10% of H{sub 2} in N{sub 2}). High-temperature behavior of both samples was monitored using simultaneous thermogravimetry and differential scanning calorimetry. The decomposition of almandine and pyrope turned out to proceed at slightly different temperatures above 1000 degree sign C. Therefore, two series of samples were prepared based on the results of thermal analysis: almandine heated up to 950 deg. C, 1070 deg. C and 1200 deg. C, and pyrope heated up to 1000 deg. C, 1100 deg. C, 1125 deg. C and 1200 deg. C. The identification of the decomposition products was performed by X-ray powder diffraction and Moessbauer spectroscopy. The common feature of the decomposition of both garnets is the presence of metallic iron and spinel phase, while the other products include fayalite, cristobalite, and cordierite for almandine; and enstatite and anorthite for pyrope. The formation of this last component was enabled due to Ca content in pyrope.

36 MATERIALS SCIENCE↗

Structure, dielectric, and magnetic properties of Sr{sub 2}TiMnO{sub 6} ceramics

Sr{sub 2}TiMnO{sub 6}, a double perovskite associated with high degree of B-site cation disorder was investigated in detail for its structural, magnetic, and dielectric properties. Though x-ray powder diffraction analysis confirms its cubic structure, first order Raman scattering and infrared reflectivity spectra indicate a breaking of the local cubic symmetry. The magnetization study reveals an anomaly at 14 K owing to a ferrimagnetic/canted antiferromagneticlike ordering arising from local Mn-O-Mn clusters. Saturated M-H hysteresis loops obtained at 5 K also reflect the weak ferromagnetic exchange interactions present in the system and an approximate estimation of Mn{sup 3+}/Mn{sup 4+} was done using the magnetization data for the samples sintered at different temperatures. The conductivity and dielectric behavior of this system has been investigated in a broad temperature range of 10 to 300 K. Intrinsic permittivity was obtained only below 100 K whereas giant permittivity due to conductivity and Maxwell-Wagner polarization was observed at higher temperatures. X-ray photoemission studies further confirmed the presence of mixed oxidation states of Mn and the valence band spectra analysis was carried out in detail.

36 MATERIALS SCIENCE↗

Low-temperature crystal structure, specific heat, and dielectric properties of lithium tetraborate Li{sub 2}B{sub 4}O{sub 7}

Coherent neutron powder diffraction experiments were carried out together with specific heat, dilatometry, and dielectric spectroscopy studies on Li{sub 2}B{sub 4}O{sub 7} enriched with {sup 11}B isotope to 99.3% at low temperatures. Neither traces of phase transformations nor discontinuous changes in physical properties were observed. Negative thermal expansion, anomalous thermal behavior of selected interatomic distances/angles, isotropic displacement parameters on specific sites as well as dielectric constant were discussed in terms of dynamic lithium disorder.

36 MATERIALS SCIENCE↗

Flux requirements for the growth of RFeAsO (R = rare earth) superconductors

Millimeter-sized LaFeAsO single crystals have been successfully grown out of NaAs flux starting with (LaAs+1/2Fe{sub 2}O{sub 3}):20NaAs. The factors which allow the growth of these crystals out of NaAs but not out of many other fluxes, such as FeAs, have been investigated. X-ray powder diffraction found that NaAs synthesized for the growth of RFeAsO superconductors has monoclinic LiAs structure. Thermal analysis confirmed that NaAs melts congruently at about 600 C. The ability to extract RFeAsO crystals from this NaAs flux suggests that NaAs has a significant oxygen solubility, possibly due to the formation of the ternary compound NaAsO{sub 2}, and enough oxygen diffusivity to transport solute to the growth front. Oxygen solubility and diffusivity are two important factors in searching for an alternative environmentally benign flux for the growth of RFeAsO superconductors.

36 MATERIALS SCIENCE↗

Transforming graphite to nanoscale diamonds by a femtosecond laser pulse

Formation of cubic diamond from graphite following irradiation by a single, intense, ultra-short laser pulse has been observed. Highly oriented pyrolytic graphite (HOPG) samples were irradiated by a 100 fs pulse with a center wavelength of 800 nm. Following laser exposure, the HOPG samples were studied using Raman spectroscopy of the sample surface. In the laser-irradiated areas, nanoscale cubic diamond crystals have been formed. The exposed areas were also studied using grazing incidence x-ray powder diffraction showing a restacking of planes from hexagonal graphite to rhombohedral graphite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure refinement and dielectric relaxation of M-type Ba, Sr, Ba-Sr, and Ba-Pb hexaferrites

M-type hexaferrites with compositions BaFe{sub 12}O{sub 19} (BFO), SrFe{sub 12}O{sub 19} (SFO), Ba{sub 0.5}Sr{sub 0.5}Fe{sub 12}O{sub 19} (BSFO), and Ba{sub 0.5}Pb{sub 0.5}Fe{sub 12}O{sub 19} (BPFO) were synthesized by commercial solid state reaction method. The Rietveld refinement of x-ray powder diffraction revealed a single hexagonal phase with space group P6{sub 3}/mmc for BFO, SFO, and BSFO samples, whereas BPFO sample contains hematite ({alpha}-Fe{sub 2}O{sub 3}) phase with space group R3c along with the M-type main phase. All the samples show dispersion in dielectric constant ({epsilon} Prime ) and dielectric loss (tan {delta}) values with frequency. The values of {epsilon} Prime and tan {delta} increase with increase in temperature due to increase in the number of charge carriers and their mobilities, which are thermally activated. The reciprocal temperature dependence of conductivity ({sigma}{sub ac}) and the most probable relaxation time ({tau}{sub M Double-Prime }) satisfies the Arrhenius relation. A perfect overlapping of the normalized plots of modulus isotherms on a single 'super curve' for all the studied temperatures reveals a temperature independence of dynamic processes involved in conduction and for relaxation. Further, the complex plots of M{sup *} (M Double-Prime vs M Prime ) indicate that dc conductivity dominates in the region below the M Double-Prime {sub max} point. Above M Double-Prime {sub max}, the variations follow Jonscher power law ({sigma} = A{omega}{sup s}) implying that ac conductivity is dominating in this region. Among the prepared samples, SFO hexaferrite has lowest values of {sigma}{sub ac}, {epsilon} Prime , and tan {delta} making it suitable for use in microwave devices.

36 MATERIALS SCIENCE↗

Revised structural phase diagram of (Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3})-(BaZr{sub 0.2}Ti{sub 0.8}O{sub 3})

The temperature-composition phase diagram of barium calcium titanate zirconate (x(Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3})-(1 - x)(BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}); BCTZ) has been reinvestigated using high-resolution synchrotron x-ray powder diffraction. Contrary to previous reports of an unusual rhombohedral-tetragonal phase transition in this system, we have observed an intermediate orthorhombic phase, isostructural to that present in the parent phase, BaTiO{sub 3}, and we identify the previously assigned T-R transition as a T-O transition. We also observe the O-R transition coalescing with the previously observed triple point, forming a phase convergence region. The implication of the orthorhombic phase in reconciling the exceptional piezoelectric properties with the surrounding phase diagram is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of zinc doped nano TiO{sub 2} for efficient photocatalytic degradation of Eriochrome Black T

Sol-gel method was used to synthesize undoped and zinc doped TiO{sub 2} with varied dopant concentrations using titanium tetraisopropoxide and zinc acetate as precursors. The synthesized catalyst samples were characterized by various techniques such as X-ray powder diffraction (XRD), UV-vis diffuse reflectance (DRS). The photocatalytic activity was determined by means of degradation of azo dye Eriochrome Black T. The results revealed that Zn doped TiO{sub 2} nanoparticles exhibited better results as compared to undoped TiO{sub 2} nanoparticles. Zn doped TiO{sub 2} (0.7mol %) nanoparticles exhibited the highest photocatalytic activity.

36 MATERIALS SCIENCE↗

Structural and spectroscopic analyses of europium doped yttrium oxyfluoride powders prepared by combustion synthesis

A facile widely spread technique employed to produce low-cost high-yield oxide powders, combustion synthesis, was used to prepare yttrium oxyfluoride crystalline ceramic powders. The structure of the powders was analyzed by X-ray powder diffraction and Rietveld refinement. Samples heat treated at 700 °C had a predominance of vernier orthorhombic Y{sub 6}O{sub 5}F{sub 8} phase, while samples heat treated at 800 °C crystallized in stoichiometric rhombohedral YOF phase. The samples were doped with luminescent europium trivalent ions (Eu{sup 3+}) in different concentrations (1–15 wt.%) and Judd-Ofelt theory was used to probe the distortion from the inversion symmetry of the local crystal field and the degree of covalency between the rare-earth ion and the surrounding ligands. The luminescence lifetime was measured and the luminescence quantum efficiency (LQE) was estimated. We observed that Eu{sup 3+}:Y{sub 6}O{sub 5}F{sub 8} samples presented higher LQE in spite of the larger local crystal field anisotropy found for Eu{sup 3+}:YOF samples.

36 MATERIALS SCIENCE↗

Effect of Pt promotion on Ni/Al{sub 2}O{sub 3} for the selective catalytic reduction of NO with hydrogen

Ni/Al{sub 2}O{sub 3} (10 wt.% Ni) and Ni-Pt/Al{sub 2}O{sub 3} (10 wt.% Ni, 0.5 wt.% Pt) were comparatively tested in the hydrogen selective catalytic reduction process (H{sub 2}-SCR), at reaction temperatures below 350°C. Catalytic activity tests consisted in temperature programmed reactions (TPRea) under plug flow conditions from 50 to 350°C, with a temperature rate of 5°C/min, using a feed stream with a reactant ratio NO:H{sub 2} = 1:1.3 and a GHSV of 4500 h{sup −1}. Promotion with Pt increases the catalytic performances of the Ni based catalyst, in respect to NO conversion, N{sub 2} selectivity and N{sub 2} yield. The reaction temperatures for NO conversion above 95% decrease significantly due to Pt addition, from 250°C for Ni/Al{sub 2}O{sub 3} to 125°C for Ni-Pt/Al{sub 2}O{sub 3}. Characterization of catalysts was performed by: X ray powder diffraction (XRD) for the estimation of Ni crystallite size, temperature programmed reduction (TPR) for the catalyst reducibility, temperature programmed desorption of hydrogen (H{sub 2}-TPD) for the investigation of active sites and metal dispersion on the support, N{sub 2} adsorption-desorption isotherms at −196°C for the determination of total specific surface area and pore size distribution, and H/D isotopic exchange on the catalyst surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and elastic anisotropy in magnetorheological elastomers using nickel-based nanoparticles and nanochains

Nickel (Ni) based nanoparticles and nanochains were incorporated as fillers in polydimethylsiloxane (PDMS) elastomers and then these mixtures were thermally cured in the presence of a uniform magnetic field. In this way, macroscopically structured-anisotropic PDMS-Ni based magnetorheological composites were obtained with the formation of pseudo-chains-like structures (referred as needles) oriented in the direction of the applied magnetic field when curing. Nanoparticles were synthesized at room temperature, under air ambient atmosphere (open air, atmospheric pressure) and then calcined at 400 °C (in air atmosphere also). The size distribution was obtained by fitting Small Angle X-ray Scattering (SAXS) experiments with a polydisperse hard spheres model and a Schulz-Zimm distribution, obtaining a size distribution centered at (10.0 ± 0.6) nm with polydispersivity given by σ = (8.0 ± 0.2) nm. The SAXS, X-ray powder diffraction, and Transmission Electron Microscope (TEM) experiments are consistent with single crystal nanoparticles of spherical shape (average particle diameter obtained by TEM: (12 ± 1) nm). Nickel-based nanochains (average diameter: 360 nm; average length: 3 μm, obtained by Scanning Electron Microscopy; aspect ratio = length/diameter ∼ 10) were obtained at 85 °C and ambient atmosphere (open air, atmospheric pressure). The magnetic properties of Ni-based nanoparticles and nanochains at room temperature are compared and discussed in terms of surface and size effects. Both Ni-based nanoparticles and nanochains were used as fillers for obtaining the PDMS structured magnetorheological composites, observing the presence of oriented needles. Magnetization curves, ferromagnetic resonance (FMR) spectra, and strain-stress curves of low filler's loading composites (2% w/w of fillers) were determined as functions of the relative orientation with respect to the needles. The results indicate that even at low loadings it is possible to obtain magnetorheological composites with anisotropic properties, with larger anisotropy when using nanochains. For instance, the magnetic remanence, the FMR field, and the elastic response to compression are higher when measured parallel to the needles (about 30% with nanochains as fillers). Analogously, the elastic response is also anisotropic, with larger anisotropy when using nanochains as fillers. Therefore, all experiments performed confirm the high potential of nickel nanochains to induce anisotropic effects in magnetorheological materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗