Search NASA⌕ Search

SEARCH · Search NASA

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Resolution of Virtual Depth Sectioning from Four-Dimensional Scanning Transmission Electron Microscopy

Abstract One approach to three-dimensional structure determination using the wealth of scattering data in four-dimensional (4D) scanning transmission electron microscopy (STEM) is the parallax method proposed by Ophus et al. (2019. Advanced phase reconstruction methods enabled by 4D scanning transmission electron microscopy, Microsc Microanal25, 10–11), which determines the scattering matrix and uses it to synthesize a virtual depth-sectioning reconstruction of the sample structure. Drawing on an equivalence with a hypothetical confocal imaging mode, we derive contrast transfer and point spread functions for this parallax method applied to weakly scattering objects, showing them identical to earlier depth-sectioning STEM modes when only bright field signal is used, but that improved depth resolution is possible if dark field signal can be used. Through a simulation-based study of doped Si, we show that this depth resolution is preserved for thicker samples, explore the impact of shot noise on the parallax reconstructions, discuss challenges to making use of dark field signal, and identify cases where the interpretation of the parallax reconstruction breaks down.

3D imaging↗
DOE OSTI2020

Isotopically resolved neutron total cross sections at intermediate energies

The neutron total cross sections σ tot of 16,18 O, 58 64 Ni, 103 Rh, and 112,124 Sn have been measured at the Los Alamos Neutron Science Center from low to intermediate energies (3 ≤ E lab ≤ 450 MeV) by leveraging wave-form-digitizer technology. The σ tot relative differences between isotopes are presented, revealing additional information about the isovector components needed for an accurate optical-model description away from stability. Digitizer-enabled σ tot -measurement techniques are discussed and a series of uncertainty-quantified dispersive optical model (DOM) analyses using these new data is presented, validating the use of the DOM for modeling light systems ( 16,18 O) and systems with open neutron shells ( 58,64 Ni and 112,124 Sn). Here, the valence-nucleon spectroscopic factors extracted for each isotope reaffirm the usefulness of high-energy proton reaction cross sections for characterizing depletion from the mean-field expectation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Cross section for b b ¯ production via dielectrons in d + Au collisions at s N N = 200 GeV

We report a measurement of e⁺e⁻ pairs from semileptonic heavy-flavor decays in d+Au collisions at √s NN = 200 GeV. Thus, exploring the mass and transverse-momentum dependence of the yield, the bottom decay contribution can be isolated from charm, and quantified by comparison to PYTHIA and MC@NLO simulations. The resulting bb-production cross section is σ d Au bb =1.37±0.28(stat)±0.46(syst) mb, which is equivalent to a nucleon-nucleon cross section of σ NN bb =3.4 ± 0.8(stat)±1.1(syst) µb.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

First measurement of the total inelastic cross section of positively charged kaons on argon at energies between 5.0 and 7.5 GeV

ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/𝑐 beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380 ± 26 mbarns for the 6 GeV/𝑐 setting and 379 ± 35 mbarns for the 7 GeV/𝑐 setting.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Inclusive cross section and double-helicity asymmetry for $\pi^{0}$ production at midrapidity in $p$$+$$p$ collisions at $\sqrt{s}=510$ GeV

PHENIX measurements are presented for the cross section and double-helicity asymmetry (ALL) in inclusive π⁰ production at midrapidity from p+p collisions at √s = 510 GeV from data taken in 2012 and 2013 at the Relativistic Heavy Ion Collider. The next-to-leading-order perturbativequantum- chromodynamics theory calculation is in excellent agreement with the presented cross section results. The calculation utilized parton-to-pion fragmentation functions from the recent DSS14 global analysis, which prefer a smaller gluon-to-pion fragmentation function. The π⁰A LL results follow an increasingly positive asymmetry trend with pT and √s with respect to the predictions and are in excellent agreement with the latest global analysis results. This analysis incorporated earlier results on π0 and jet A LL , and suggested a positive contribution of gluon polarization to the spin of the proton ΔG for the gluon momentum fraction range x > 0.05. The data presented here extend to a currently unexplored region, down to x 0.01, and thus provide additional constraints on the value of ΔG.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Chemical and elemental mapping of spent nuclear fuel sections by soft X-ray spectromicroscopy

Soft X-ray spectromicroscopy at the O K -edge, U N 4,5 -edges and Ce M 4,5 -edges has been performed on focused ion beam sections of spent nuclear fuel for the first time, yielding chemical information on the sub-micrometer scale. To analyze these data, a modification to non-negative matrix factorization (NMF) was developed, in which the data are no longer required to be non-negative, but the non-negativity of the spectral components and fit coefficients is largely preserved. The modified NMF method was utilized at the O K -edge to distinguish between two components, one present in the bulk of the sample similar to UO 2 and one present at the interface of the sample which is a hyperstoichiometric UO 2+ x species. The species maps are consistent with a model of a thin layer of UO 2+ x over the entire sample, which is likely explained by oxidation after focused ion beam (FIB) sectioning. In addition to the uranium oxide bulk of the sample, Ce measurements were also performed to investigate the oxidation state of that fission product, which is the subject of considerable interest. Analysis of the Ce spectra shows that Ce is in a predominantly trivalent state, with a possible contribution from tetravalent Ce. Atom probe analysis was performed to provide confirmation of the presence and localization of Ce in the spent fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Foreword: Special Section on Multiphysics Aspects of Power Electronics Packaging—Power Die, Power Module, and Converter Level: Part 2

Power electronics are increasingly being used to condition electricity for a wide array of applications, such as transportation (on land, air, and water), data centers, radio frequency, directed energy, wind, solar, and grid-tied applications. Here, to increase power density, performance, efficiency, and reliability-as well as to reduce cost-innovations and developments are needed in the multiphysics packaging of power electronics at a die, module, and converter level. This includes fundamental R&D related to emerging high-voltage, high-temperature, and high-switching-frequency power electronics, packaging materials, thermal materials and interfaces, fluid-based thermal management technologies, reliability, condition monitoring, and prognostics. Latest developments in this area are published as a Special Section on Multiphysics Aspects of Power Electronics Packaging. The first part was published in the May 2024 issue of the IEEE Transactions on Components, Packaging and Manufacturing Technology (Volume 14, Issue 5). The second part of that Special Section is being published in this issue. A brief summary of the papers included in the second part are given below.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Tri-Sectional Approximation of the Shortest Path to Long-Term Voltage Stability Boundary with Distributed Energy Resources

Ensuring long-term voltage stability is critical for reliable operations of power grids. High share of distributed energy resources (DERs) can create complicated system operation modes that may invalidate the traditional long-term voltage stability analysis based on typical operation modes. To address this challenge, this paper investigates how to compute the shortest path to the voltage stability boundary in the DER aggregated load space with large dispersion. Instead of working in the Euclidean space, we establish the analysis and computations on the algebraic power flow manifold to better capture the curvature change of the shortest path along the direction of losing stability. A modified optimal control framework is presented for obtaining the ground-truth of the smooth shortest path on the manifold. To efficiently and accurately solve for the shortest path, we further leverage the geometric features of the power flow manifold and propose a tri-sectional approximation model that is scalable for large-scale systems. Several numerical examples, up to the 1354-bus system, with different DER penetration levels and high dimensional renewable power injection variations are evaluated. The simulation results demonstrate that the tri-sectional approximation achieves high accuracy and efficiency to approximate the shortest path to the voltage stability boundary.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Design by analysis rules for ASME Section III, Division 5, Class B components

The current rules for elevated temperature ASME Section III, Division 5, Class B components, other than piping, were basically adapted from the Design-by-Rule approach for Section VIII, Division 1 vessels. A goal of the proposed new rules is to explicitly account for the design life and cyclic service while recognizing the less-rigorous requirements commensurate with lesser safety consideration. Further goals are to maximize the use of modern computational technology, for example finite element analysis in conjunction with reference stress concepts, and to avoid the need for stress classification. This paper summarizes the work done to address these issues. A summary of the design-by-analysis for primary loads, strain limit evaluation, and creep-fatigue damage assessment is presented. The proposed design-by-analysis creep-fatigue damage calculation approach uses a new elastic follow-up-based Isochronous Stress Strain Curve stress relaxation procedure. A set of sample problems are selected to validate the proposed design-by-analysis rules for creep-fatigue damage assessment. The proposed Class B rules are evaluated against the Class A elastic design rules and the experimental data obtained from a family of a simplified model test-based key-feature test results. The proposed Class B creep-fatigue damage assessment methodology yields conservative design cycles estimates compared to the experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2015

SU-E-T-236: Deconvolution of the Total Nuclear Cross-Sections of Therapeutic Protons and the Characterization of the Reaction Channels

Purpose: The knowledge of the total nuclear cross-section Qtot(E) of therapeutic protons Qtot(E) provides important information in advanced radiotherapy with protons, such as the decrease of fluence of primary protons, the release of secondary particles (neutrons, protons, deuterons, etc.), and the production of nuclear fragments (heavy recoils), which usually undergo β+/− decay by emission of γ-quanta. Therefore determination of Qtot(E) is an important tool for sophisticated calculation algorithms of dose distributions. This cross-section can be determined by a linear combination of shifted Gaussian kernels and an error-function. The resonances resulting from deconvolutions in the energy space can be associated with typical nuclear reactions. Methods: The described method of the determination of Qtot(E) results from an extension of the Breit-Wigner formula and a rather extended version of the nuclear shell theory to include nuclear correlation effects, clusters and highly excited/virtually excited nuclear states. The elastic energy transfer of protons to nucleons (the quantum numbers of the target nucleus remain constant) can be removed by the mentioned deconvolution. Results: The deconvolution of the term related to the error-function of the type cerf*er((E-ETh)/σerf] is the main contribution to obtain various nuclear reactions as resonances, since the elastic part of energy transfer is removed. The nuclear products of various elements of therapeutic interest like oxygen, calcium are classified and calculated. Conclusions: The release of neutrons is completely underrated, in particular, for low-energy protons. The transport of seconary particles, e.g. cluster formation by deuterium, tritium and α-particles, show an essential contribution to secondary particles, and the heavy recoils, which create γ-quanta by decay reactions, lead to broadening of the scatter profiles. These contributions cannot be accounted for by one single Gaussian kernel for the description of lateral scatter.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Preliminary results of the cross-section measurement of e{sup +}e{sup −} → φ(1020)η process with the CMD-3 detector at VEPP-2000 collider

We report preliminary results on the cross section of the process e{sup +}e{sup −} → φ(1020)η measured at 30 center-of-mass energy points in the range from 1.59 up to 2.0 GeV. Data analysis is based on the integrated luminosity of 22 pb{sup −1} collected with the CMD-3 detector in 2011–2012. The obtained cross section agrees with the BaBar measurement and has better statistical accuracy.

43 PARTICLE ACCELERATORS↗
DOE OSTI2016

Measurement of the production cross section for charmed baryons in proton–nucleus interactions at 70 GeV

The results of an analysis of data from the SERP-E-184 experiment devoted to studying mechanisms of the production of charmed particles in proton–nucleus interactions at 70 GeV and their decays are presented. The data in question were obtained upon irradiating the SVD-2 active target consisting of carbon, silicon, and lead plates with a beam of 70-GeV protons. A detailed simulation on the basis of the FRITIOF7.02 and GEANT3.21 code packages made it possible to optimize event-selection criteria and to calculate the detection efficiency for Λ{sub c}{sup +} baryons. After selecting a signal from the threebody decay of a Λ{sub c}{sup +} baryon, the inclusive cross section for its production at near-threshold energies, its lifetime, and the parameter of the A dependence of the cross section were found. The Λ{sub c}{sup +} -baryon yields are tabulated along with data from other experiments and theoretical predictions.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2016

On the extraction of cross sections for π{sup 0} and η photoproduction off neutrons from deuteron data

We discuss the procedure of extracting the photoproduction cross section for neutral pseudoscalar mesons off neutrons from deuteron data. The main statement is that the final-state-interaction corrections for the proton and neutron target are in general not equal, but for π{sup 0} production there are special cases where they have to be identical and there are large regions in the parameter space of incident photon energy and pion polar angle, Θ*, where they happen to be quite similar. The corrections for both target nucleons are practically identical for π0 production in the energy range of the Δ(1232)3/2+ resonance due to the specific isospin structure of this excitation. Also above the Δ-isobar range large differences between proton and neutron correction factors are only predicted for extreme forward angles (Θ* *lt; 20°), but the results are similar for larger angles. The case of η photoproduction is also briefly considered. Numerical results for the γp → π{sup 0}p and γn → π{sup 0}n correction factors are discussed. Also the model description for the available data on the differential γd → π{sup 0}pn cross sections are given.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Structure effects in polarization and cross sections for A(p, p’)X inelastic reactions on {sup 40}Ca and {sup 12}C nuclei at 1 GeV

The polarization of secondary protons in the (p, p’) inelastic reactions on {sup 40}Ca and {sup 12}C nuclei at the initial proton energy of 1 GeV was measured over a wide range of scattered-proton momenta at a laboratory angle of Θ = 21°. The reaction cross sections were also measured. Scattered protons were detected by means of magnetic spectrometer equipped with a polarimeter based on multiwire-proportional chambers. A structure in the polarization and cross-section data, which is probably related to scattering off nucleon correlations in the nuclei involved, was observed.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Energy dependence of the cross sections for the e{sup +}e{sup –} → hadrons process near the production threshold for the NN̄ pair

The energy dependence of the cross sections for the processes e{sup +}e{sup −} → π{sup +}π{sup −}π{sup 0}, K{sup +}K{sup −}, ηπ{sup +}π{sup −}, ωπ{sub 0}, and K{sup +}K{sup −}π{sup +}π{sup −} is studied near the production threshold for a nucleon–antinucleon pair. It is shown that, within the measurement errors, the cross sections in question behave smoothly in this energy region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Peculiarities in total cross sections of reactions with weakly bound nuclei {sup 6}He, {sup 9}Li

The energy dependence of the total cross sections for the {sup 6}He + Si and {sup 9}Li + Si reactions was measured at beam energies between 5 and 20 MeV per nucleon. The results agree with experimental data published for the {sup 6}He + Si reaction. New data are obtained for the {sup 9}Li + Si reaction in the vicinity of a local enhancement of the total cross section. A theoretical analysis of the possible reasons behind the appearance of this peculiarity in the case of collisions of {sup 6}He and {sup 9}Li nuclei with silicon target nuclei is performed. In particular, the enhancement may owe its origin to the effect of loosely bound projectile nucleons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

The Study of (n, 2n) Reaction Cross Sections for Ce and Nd Isotopes up to 20 MeV

Neutron cross section calculations for {sup 136}Ce(n, 2n){sup 135}Ce, {sup 138}Ce(n, 2n){sup 137}Ce, {sup 140}Ce(n, 2n){sup 139}Ce, {sup 142}Ce(n, 2n){sup 141}Ce, {sup 142}Nd(n, 2n){sup 141}Nd, {sup 144}Nd(n, 2n){sup 143}Nd, {sup 146}Nd(n, 2n){sup 145}Nd, {sup 148}Nd(n, 2n){sup 147}Nd, and {sup 150}Nd(n, 2n){sup 149}Nd were done in the incident energy range from 10 to 20 MeV. The calculations were performed using three codes TALYS-1.6 for two-component Exciton model, EMPIRE-3.2 Malta for Exciton model, and ALICE/ASH for the Geometry-Dependent Hybrid (GDH) model. The results of model calculations were compared with the available experimental data and also with the evaluated data in the TENDL-2015 (based on the modified TALYS code), ENDF/B-VII.1 libraries. The calculated cross section data were compared with the available experimental data obtained from EXFOR and also compared with semiempirical formulas around 14–15 MeV. The results of model calculation were found to be in good agreement with the experimental data given in literature and semiempirical data around 14–15MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Evaluated Cross Sections of Photoneutron Reactions on the Isotope {sup 116}Sn and Spectra of Neutrons Originating from These Reactions

With the aid of the results obtained by evaluating cross sections of partial photoneutron reactions on the isotope {sup 116}Sn and the energy spectra of neutrons originating from these reactions, the possible reasons for the well-known discrepancies between the results of different photonuclear experiments were studied on the basis of a combinedmodel of photonuclear reactions. On the basis of physical criteria of data reliability and an experimental–theoretical method for evaluating cross sections of partial reactions, it was found that these discrepancies were due to unreliably redistributing neutrons between (γ, 1n), (γ, 2n), and (γ, 3n) reactions because of nontrivial correlations between the experimentally measured energy of neutrons and their multiplicity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗