Search NASA⌕ Search

SEARCH · Search NASA

Results for “separability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

A study of the effects of numerical dissipation on the calculation of supersonic separated flows

An extensive investigation of the effect of numerical dissipation on the calculation of supersonic, separated flow over a rearward-facing step is carried out. The complete two-dimensional Navier-Stokes equations are solved by means of MacCormack's standard explicit, unsplit, time-dependent, finite difference method. A fourth-order numerical dissipation term is added explicitly. The magnitude of this term is progressively varied, and its consequences on the flowfield calculations are identified and studied. For a cold-wall, heat transfer case, numerical dissipation had a major effect on the results, particularly in the separated region. However, rather dramatically for an adiabatic wall case, numerical dissipation had virtually no effect on the results. The role of grid size on both the influence of numerical dissipation, and on the overall accuracy of the separated flow solutions is discussed.

Kuruvila, G.↗
NASA NTRS1984

Gas chromatographic separation of nitrogen, oxygen, argon, and carbon monoxide using custom-made porous polymers from high purity divinylbenzene

Existing porous polymers were surveyed for their ability to separate the subject gases. Certain products that showed more promise than others were synthesized and the existing synthetic procedures studied and modified to produce new polymers with enhanced ability to separate the subject gases. Evaluation of the porous polymers was carried out practically by gas chromatography at ambient temperature. The modified synthetic procedures were somewhat simpler than the originals. The new porous polymers made with high purity divinylbenzene enabled use of shorter columns to obtain the separations desired.

Pollock, G. E.↗
NASA NTRS1984

Sintered plug flow modulation of a vapor-liquid phase separator for a helium II vessel

Presented is a system for modulation of a superfluid (helium II) flow in a vapor-liquid phase separator, for use in cryogenic storage tanks in future space missions. The system consists of a semicircular mechanically operated shutter, downstream of the separator plug, rotated at 0.1 rpm to control the operational surface area of the separator. The mass flow rate was varied from 10 to 22 mg/s. Pressure gradients across the plug are also discussed.

Frederking, T. H. K.↗
NASA NTRS1985

Predictions of transonic separated flow with an eddy-viscosity/Reynolds-shear-stress closure model

In previous work, a new turbulence-closure model was specifically developed for two-dimensional turbulent boundary layers subjected to strong, adverse-pressure gradients and the attendant separation. This closure model was shown to perform well, but the inverse, boundary-layer calculations used in evaluating the model were not truly predictive since the mass-flux parameter distribution obtained from the experimental data had to be specified. The objective of this study was to evaluate this closure model for a series of strong, transonic, inviscid-viscous interactions with varying degrees of separation using a fully predictive calculation method based on the Reynolds-averaged, Navier-Stokes equations. Calculated results are compared with experimental results and are shown to be in excellent agreement, even for the interactions with massive separation. This closure model has the very favorable property of requiring little more computational effort than equilibrium, algebraic models.

Johnson, D. A.↗
NASA NTRS1985

Time-dependent Navier-Stokes computations of separated flows over airfoils

The application of both a central-difference and an upwind implicit approximate factorization Navier-Stokes algorithm to highly separated flow is described. Using the thin-layer approximation, both algorithms are employed to solve the low Reynolds number laminar flow around a circular cylinder with periodic shedding. Results agree with experimental Strouhal numbers to within about 10 percent. A grid refinement study is conducted using the upwind code for both the thin-layer and complete Navier-Stokes approximations. The circular cylinder solution is shown to be highly dependent upon both grid density outward from the body and grid extent. Finally, the thin-layer central-difference code is used to predict the time-accurate unsteady flow about two stalled airfoils. The NACA 0012 airfoil turbulent solutions are periodic with Strouhal numbers of about 0.1; a strong vortex is periodically shed from the leading edge. The LS(1)-0417 airfoil turbulent solution shows a high frequency oscillatory trailing edge separation. The 20 degree NACA 0012 airfoil solution is massively separated, but shows no evidence of periodicity.

Rumsey, C. L.↗
NASA NTRS1985

A study of laminar separation bubble in the concave region of an airfoil using laser velocimetry

Laser velocimetry (LV) was used to study the nature of laminar separation bubbles in the concave region of a 1.83-meter airfoil model which was tested in the NASA Langley Low Turbulence Pressure Tunnel. Three component, coincident data from LV measurements including histograms of particle velocity, mean velocity profiles, turbulence intensity, and Reynolds stresses within the shear layer were used to determine the locations of laminar separation, transition, and turbulent reattachment. boundary-layer parameters determined from velocity profiles were used to compare the results with existing empirical relations for describing the laminar separation bubble.

Mangalam, S. M.↗
NASA NTRS1986

Separation in Binary Alloys

Studies of monotectic alloys and alloy analogs reviewed. Report surveys research on liquid/liquid and solid/liquid separation in binary monotectic alloys. Emphasizes separation processes in low gravity, such as in outer space or in free fall in drop towers. Advances in methods of controlling separation in experiments highlighted.

Frazier, D. O.↗
NASA NTRS1984

Rationale for two phase polymer system microgravity separation experiments

The two-phase systems that result when aqueous solutions of dextran and poly(ethylene glycol) are mixed at concentrations above a few percent are discussed. They provide useful media for the partition and isolation of macromolecules and cell subpopulations. By manipulating their composition, separations based on a variety of molecular and surface properties are achieved, including membrane hydrophobic properties, cell surface charge, and membrane antigenicity. Work on the mechanism of cell partition shows there is a randomizing, nonthermal energy present which reduces separation resolution. This stochastic energy is probably associated with hydrodynamic interactions present during separation. Because such factors should be markedly reduced in microgravity, a series of shuttle experiments to indicate approaches to increasing the resolution of the procedure are planned.

Brooks, D. E.↗
NASA NTRS1985

Effect of free stream turbulence on flow separation

An analysis is presented to study the influence of free stream turbulence on separation in the case of crossflow over a circular cylinder. An eddy diffusivity model has been formulated and the governing momentum equation has been solved numerically. A correlation parameter has been suggested to correlate the angle of separation. It has been found that the angle of separation increases with increasing free stream turbulence intensity.

Gorla, R. S. R.↗
NASA NTRS1985

The efficient simulation of separated three-dimensional viscous flows using the boundary-layer equations

A simple and computationally efficient algorithm for solving the unsteady three-dimensional boundary-layer equations in the time-accurate or relaxation mode is presented. Results of the new algorithm are shown to be in quantitative agreement with detailed experimental data for flow over a swept infinite wing. The separated flow over a 6:1 ellipsoid at angle of attack, and the transonic flow over a finite-wing with shock-induced 'mushroom' separation are also computed and compared with available experimental data. It is concluded that complex, separated, three-dimensional viscous layers can be economically and routinely computed using a time-relaxation boundary-layer algorithm.

Van Dalsem, W. R.↗
NASA NTRS1985

An analysis of a separation bubble transition criterion at low Reynolds numbers

Factors which influence the criterion governing the length of the laminar region of a separation bubble on an airfoil at low Re were investigated. The criterion is the onset of separation when a critical Re value is surpassed. Wind tunnel data were gathered for the flow around a NACA 66(3)-018 airfoil at Re from 50,000-200,000. The data were taken with either hot-wire anemometers or pressure taps. The value of the critical Re was influenced by the chord Re, the angle of attack and the level of turbulence in the free stream. However, the turbulence levels examined, up to 0.184 percent, did not greatly affect the critical Re. Further characterizations of the effects of the three factors on the critical Re are necessary before the important features of separation bubbles can be identified with an acceptable level of certainty.

Schmidt, G. S.↗
NASA NTRS1986

A new, improved method for separating turbulent boundary layer for aerodynamic performance prediction of trailing edge stall airfoils

A method based on integral techniques is presented to determine the turbulent separation location and separation pressure for trailing edge stall airfoils exhibiting extensive separated flow regions during prestall and poststall conditions. The method and experimental laser velocimetry data in the turbulence amplification region are used to establish a relationship between fluctuating velocity components and mean velocity in the boundary layer. The method is demonstrated for symmetrical, cambered, conventional and supercritical airfoils in the 5-to-21-percent thickness ratio range, and over a Reynolds number range of 2 to 22 million. Good agreement with experimental data is found, and the method is used in conjunction with the NASA Multi-Component Airfoil Computer Program to predict maximum L/D ratios and maximum section/lift coefficients.

Goradia, S.↗
NASA NTRS1987

Flowfield measurements in a separated and reattached flat plate turbulent boundary layer

The separation and reattachment of a large-scale, two-dimensional turbulent boundary layer at low subsonic speed on a flat plate has been studied experimentally. The separation bubble was 55 cm long and had a maximum bubble thickness, measured to the height of the mean dividing streamline, of 17 cm, which was twice the thickness of the inlet boundary layer. A combination of laser velocimetry, hot-wire anemometry, pneumatic probing techniques, and flow visualization were used as diagnostics. Principal findings were that an outer inviscid rotational flow was defined which essentially convected over the blockage associated with the inner, viscously dominated bubble recirculation region. A strong backflow region in which the flow moved upstream 100 percent of the time was measured near the test surface over the central 35 percent of the bubble. A laminar backflow boundary layer having pseudo-turbulent characteristics including a log-linear velocity profile was generated under the highly turbulent backflow. Velocity profile shapes in the reversed flow region matched a previously developed universal backflow profile at the upstream edge of the separation region but not in the steady backflow region downstream. A smoke flow visualization movie and hot-film measurements revealed low frequency nonperiodic flapping at reattachment. However, forward flow fraction data at reattachment and mean velocity profiles in the redeveloping boundary layer downstream of reattachment correlated with backward-facing step data when the axial dimension was scaled by the distance from the maximum bubble thickness to reattachment.

Patrick, William P.↗
NASA NTRS1986

Migration of the separation point on a deforming cylinder

An iterative scheme of solving the Navier-Stokes equations for unsteady two-dimensional flow about a deforming and translating cylinder is given. In the kth iteration, the convected vorticity appears as the source term in an equation of transient diffusion of vorticity. A novel integral transform is used to reduce this transient vorticity equation to a k-dimensional heat equation. The bounded solution of this equation is obtained with a general method of superposition for problems involving a moving boundary. An equation describing the migration of the separation point on a deforming cylinder in unsteady cross flows is derived from the analytically obtained velocity field. The radial expansion of the cylinder surface is shown to hasten the separation time and to increase the separation angle. The results imply that in the steady flow past a body that is moving forward and sinking at constant rates, the locus of points at which the azimuthal component of skin friction changes sign originates on the leeward ray at a point downstream of the front tip.

Lin, S. P.↗
NASA NTRS1986

Effect of OH content on phase separation behavior of soda-silica glasses

The kinetics of phase separation in a gel and ordinary soda-silica glass are followed by use of small angle X-ray scattering. Also, the influence of OH on the phase separation behavior is studied. It is found that OH accelerates the growth of the secondary phase, and that gel and ordinary glasses of similar composition and OH concentration exhibit similar phase separation characteristics.

Neilson, G. F.↗
NASA NTRS1986

Heat and mass transfer in porous media phase separation at temperatures below the lambda-point of He-4

Newtonian fluid motion, coupled to heat transfer via latent heat of phase transition, is well known from numerous studies of condensation and boiling. Considerably less knowledge is available for vapor-liquid phase separation in the absence of gravity effect on the transport phenomena. The present studies are focused on heat and mass transfer associated with vapor-liquid phase separation required for long-term storage of the cryogen liquid He II in space vessels. Though space conditions are the dominant mode of interest in advanced equipment, e.g. IR telescopes, the systems may be operated in principle during terrestrial conditions. The latter are considered in the present work. It emphasizes the linear regime including an extrapolation based on variable thermophysical properties. Data taken with a phase separation approach show departures from the linear regime prediction. They agree with a transport equation proposed for the nonlinear, turbulent regime.

Yuan, S. W. K.↗
NASA NTRS1987

Separation control over an airfoil at high angles of attack by sound emanating from the surface

Active control by sound emanating from a narrow gap in the vicinity of the leading edge of a symmetrical airfoil is used to study the influence of sound on the pressure distribution and the wake at high angles of attack. The results from experiments conducted at a Reynolds number based on the chord of 35,000 show that, with injection of sound at twice the shedding frequency of the shear layer, the region of separation becomes drastically reduced. The shear layer is found to be very sensitive to sound excitation in the vicinity of the separation point. The excitation sufficiently alters the global circulation to cause an increase in lift and reduction in drag. Furthermore, experimental results describing stall and post-stall conditions compare well with the limited data available and indicate that stall is delayed by sound injection into the separated region.

Huang, L. S.↗
NASA NTRS1986

Electrophoretic separation and analysis of living cells from solid tissues by several methods - Human embryonic kidney cell cultures as a model

The use of free-fluid electrophoresis methods to separate tissue cells having a specific function is discussed. It is shown that cells suspended by trypsinization from cultures of human embryonic kidney are electrophoretically heterogeneous and tolerate a wide range of electrophoresis buffers and conditions without significant attenuation of function. Moreover, these cells do not separate electrophoretically on the basis of size or cell position alone and can be separated according to their ability to give rise to progeny that produce specific plasminogen activators.

Todd, Paul↗